Search NASA⌕ Search

SEARCH · Search NASA

Results for “frequency range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Application of simulations and theory of sub-cyclotron frequency modes to DIII-D

Theoretical and numerical study of Alfvén eigenmodes (AEs) in the sub-cyclotron frequency range explains the observed frequency scaling with beam parameters in experiments across different devices. Global Alfvén (GAEs) and compressional Alfvén eigenmodes (CAEs) are frequently excited during neutral beam injection (NBI) in the National Spherical Torus Experiment (NSTX/NSTX-U), as well as other beam-heated devices such as MAST and DIII-D. These modes are driven unstable through the Doppler shifted cyclotron resonance with the NBI ions and can be excited in ITER due to super-Alfvénic velocities and anisotropy of the fast ion distribution. Numerical models and theory for sub-cyclotron frequency modes, previously developed and used to study the excitation of GAEs/CAEs in the NSTX(-U), have been successfully applied to explain the DIII-D observations. Simulations for DIII-D demonstrate that the modes with ω/ω ci ≈ 0.6, previously mis-identified as compressional Alfvén eigenmodes, have shear polarization and should be identified as the GAEs. Simulation results match the observed frequencies and estimated toroidal mode numbers in DIII-D experiments. Good agreement is found between scaling of the experimentally observed GAE frequencies with NBI parameters for NSTX, NSTX-U and DIII-D and scaling predicted by the theory and simulations. Here, the DIII-D simulation results also demonstrate that GAEs can be excited for larger aspect-ratio devices and smaller (sub- Alfvénic) beam injection velocities, therefore they can be unstable in ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dependence of ion-cyclotron range of frequencies instabilities on species mix and fast-ion distribution: I. Stability

Ion cyclotron emission (ICE) driven by fast ions has the potential to be a reactor relevant diagnostic of confined and escaping fast ions; moreover, controlled experiments in magnetic fusion devices can shed light on similar magnetospheric instabilities below and above the ion cyclotron frequency f ci . Dedicated DIII-D experiments studied instabilities below f ci and at cyclotron harmonics l f ci by injecting thirteen different neutral beam populations into plasmas with different thermal compositions of H, D, and 3He at five different values of toroidal field. High-frequency magnetic loops diagnose mode properties. Each beam type is individually injected for an approximate slowing-down time (~100 ms), resulting in a database of 2529 conditions that are analyzed in frequency bands corresponding to ICE harmonics and < f ci global Alfvén eigenmodes. The sub-cyclotron modes are more unstable at low field and in plasmas with large H concentration. For D injection, first harmonic ICE at f cD is more unstable in hydrogen plasmas but, for H injection, the converse is true (ICE at f cH is more unstable in D), suggesting that thermal same-species ions damp fundamental ICE. ICE stability also depends upon the pitch-angle anisotropy gradient and upon the ‘bump-on-tail’ gradient ∂f/∂v. Although the frequency of unstable ICE in these plasmas always occurs near the central cyclotron frequency, the precise value also depends on the Alfvén speed and beam direction, consistent with the idea that instability occurs for modes that simultaneously satisfy ω ≃ 2πlf ci , the magnetosonic dispersion relation, and the Doppler-shifted resonance condition.

electromagnetic ion cyclotron instabilities↗

Dependence of ion-cyclotron range of frequencies instabilities on species mix and fast-ion distribution: II. Time evolution

Dedicated DIII-D experiments studied instabilities below the ion cyclotron frequency f ci and at cyclotron harmonics by injecting thirteen different neutral beam populations into plasmas with different thermal compositions of H and D at five different values of toroidal field. The resulting database of 2529 conditions is described in Part 1: Stability. This paper focuses on the temporal evolution. For some beam geometries, the ion cyclotron emission (ICE) is much stronger at the beginning of injection, suggesting the importance of ‘bump-on-tail’ energy drive. Sawtooth crashes cause the emission to cease for some beam types and emission bands, but the opposite effect occurs for others. When unstable, for virtually all conditions and frequency bands, the emission bursts in a cycle reminiscent of predator-prey oscillations. Evidence for nonlinear interaction between ICE harmonics is observed. Strongly unstable modes typically appear within 1 ms from the start of beam injection and often decay within 0.1 ms when the beam turns off, but both the initial rise and final decay of the mode power exhibit a wide variety of behavior.

electromagnetic ion cyclotron instabilities↗

Dependence of ion-cyclotron range of frequencies instabilities on species mix and fast-ion distribution: III. Novel sub-cyclotron modes

Dedicated DIII-D experiments studied instabilities above and below the ion cyclotron frequency by injecting thirteen different neutral beam populations into L-mode plasmas with different thermal compositions of H, D, and 3 He at five different values of toroidal field. Two companion papers describe the results of these experiments in detail. This paper focuses on data and analysis of two instabilities that occur at ${\sim}0.6$ of the deuterium and hydrogen cyclotron frequencies $f_\mathrm {cD}$ and $f_\mathrm {cH}$ in mixed hydrogen and deuterium plasmas. The modes below $f_\mathrm {cD}$ are often driven unstable by deuterium beams but are rarely destabilized by hydrogen beams. The modes below $f_\mathrm {CD}$ are reported here for the first time in a fusion plasma. These $\mathrm{sub-}f_\mathrm {cH}$ modes are only driven by deuterium beams but, unlike the $\mathrm{sub-}f_\mathrm {cD}$ modes, they are only unstable in plasmas with deuterium concentrations that are ${\lesssim}20\%$; they also have a smaller amplitude than the sub-deuterium modes. Addition of fully-ionized 3 He to the plasma has little effect on the sub-cyclotron deuterium modes but is stabilizing for the sub-cyclotron hydrogen modes. The modes are excited in the core and have toroidal mode numbers around 20. These trends are compared with calculations of the growth rate in a simplified model. The theory successfully predicts global Alfvén eigenmode instability with frequencies and mode numbers close to experimental values, the stronger amplitude of the sub-deuterium modes, and the species-mix dependence of the sub-hydrogen modes. Increased damping associated with the ion-ion hybrid, cutoff, and crossover frequencies plausibly accounts for the stabilization of the $\mathrm{sub-}f_\mathrm {cH}$ modes when 3 He is puffed. However, the relative stability of $\mathrm{sub-}f_\mathrm {cH}$ modes during hydrogen injection remains unexplained.

electromagnetic ion cyclotron instability↗

Acoustical analog of the Fréedericksz transition in liquid crystals

A nonlinear relaxation model describing thresholdlike variation in the symmetry of a homeotropic orientational structure of a nematic liquid crystal (NLC) layer in an ultrasonic wave field has been constructed in the nonlinear hydrodynamics framework based on a molecular micromodel representing all processes in the mesophase proceeding from the behavior of a separate LC molecule. The relationship between the threshold characteristics and the ultrasound frequency, NLC mesophase layer thickness and material parameters, temperature, and parameters of the molecular micromodel is determined. The results of calculations for the frequency range containing the relaxation frequency of the NLC orientational order parameter are compared to the obtained experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure and phonon spectrum of a submonolayer Ni film on the surface of Cu(100)

The equilibrium atomic structure and the phonon spectra of a submonolayer (θ = 0.5 monolayer) Ni film deposited on the surface of Cu(100) are calculated using the potentials obtained by the embedded atom method. We consider atomic relaxation, the vibrational state density distribution on Ni and substrate atoms, and polarization of vibrational modes. Variation of the phonon spectrum upon segregation of Cu atoms on the film surface is considered. It is shown that mixing of vibrations of Ni adatoms with vibrations of substrate atoms occurs in the entire frequency range, leading to a frequency shift of the vibrational modes of the substrate and to the occurrence of new vibrational states atypical of a clean surface. The Cu(100)–c(2 × 2)–Ni structure is dynamically more stable when placed in the subsurface layer of the substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Energy Cooling

The paper considers methods of particle cooling applicable to beam cooling in high energy hadron colliders at the collision energy. Presently, there are two major methods of the cooling the electron cooling and stochastic cooling. The later, in application to colliders, requires exceptionally large frequency band of cooling system. Presently two methods are considered. They are the optical stochastic cooling (OSC) and the coherent electron cooling (CEC). OSC and CEC are essentially extensions of microwave stochastic cooling, operating in 1-10 GHz frequency range, to the optical frequencies enabling bands up to 30-300 THz. The OSC uses undulators as a pickup and a kicker, and an optical amplifier for signal amplification, while the CEC uses an electron beam for all these functions. We discuss major limitations, advantages and disadvantages of electron and stochastic cooling systems.

43 PARTICLE ACCELERATORS↗

Collisionless dissociation of SF6 using two resonant frequency CO2 laser fields

The collisionless dissociation of SF6 has been studied using simultaneous irradiation by two frequencies from a CO2 laser which are both nearly resonant with the SF6nu3 absorption band. It was found that the dissociation was enhanced, and occurred over a wider frequency range, than for single frequency dissociation. No threshold effect was observed for a weak resonant and a much higher energy field pumping slightly off-resonance. For such two frequency irradiation, the peak in the dissociation curve was found to be shifted to lower frequencies with respect to that for single frequency dissociation.

Gower, M. C.↗

The influence of a local wall deformation on the development of natural instabilities in a laminar boundary layer

The natural instabilities which propagate in the laminar boundary layer of a flat plate composed of intermittent wave trains are described. A spectral analysis determines the frequency range and gives a frequency and the harmonic 2 only if there is a wall deformation. This analysis provides the amplitude modulation spectrum of the instabilities. Plots of the evolution of power spectral density are compared with the numerical results obtained from the resolve of the Orr-Sommerfeld equation, while the harmonic is related to a micro-recirculating flow near the wall deformation.

Burnel, S.↗

On the nature of ULF waves upstream of planetary bow shocks

The ULF electromagnetic waves associated with the earth's foreshock appear in two discrete frequency ranges, designated the low frequency waves at 0.01 - .05 Hz and the high frequency waves at 0.4 - 1.0 Hz. Falling within this second class are both the 0.4 Hz discrete wave packets and the slightly higher frequency wave trains commonly found just preceding the bow shock. Similar waves have now also been observed upstream of, but clearly associated with, the bow shocks of Mercury, Venus and Jupiter. Those observations are reviewed along with original recent work using the two point measurements made possible by the launch of ISEE 1 and 2 to further characterize the terrestrial waves.

Hoppe, M.↗

A new measurement method for separating airborne and structureborne noise radiated by aircraft type panels

The theoretical basis for and experimental validation of a measurement method for separating airborne and structure borne noise radiated by aircraft type panels are presented. An extension of the two microphone, cross spectral, acoustic intensity method combined with existing theory of sound radiation of thin shell structures of various designs, is restricted to the frequency range below the coincidence frequency of the structure. Consequently, the method lends itself to low frequency noise problems such as propeller harmonics. Both an aluminum sheet and two built up aircraft panel designs (two aluminum panels with frames and stringers) with and without added damping were measured. Results indicate that the method is quick, reliable, inexpensive, and can be applied to thin shell structures of various designs.

Mcgary, M. C.↗

Helicopter mathematical models and control law development for handling qualities research

Progress made in joint NASA/Army research concerning rotorcraft flight-dynamics modeling, design methodologies for rotorcraft flight-control laws, and rotorcraft parameter identification is reviewed. Research into these interactive disciplines is needed to develop the analytical tools necessary to conduct flying qualities investigations using both the ground-based and in-flight simulators, and to permit an efficient means of performing flight test evaluation of rotorcraft flying qualities for specification compliance. The need for the research is particularly acute for rotorcraft because of their mathematical complexity, high order dynamic characteristics, and demanding mission requirements. The research in rotorcraft flight-dynamics modeling is pursued along two general directions: generic nonlinear models and nonlinear models for specific rotorcraft. In addition, linear models are generated that extend their utilization from 1-g flight to high-g maneuvers and expand their frequency range of validity for the design analysis of high-gain flight control systems. A variety of methods ranging from classical frequency-domain approaches to modern time-domain control methodology that are used in the design of rotorcraft flight control laws is reviewed. Also reviewed is a study conducted to investigate the design details associated with high-gain, digital flight control systems for combat rotorcraft. Parameter identification techniques developed for rotorcraft applications are reviewed.

Chen, Robert T. N.↗

Tabulation of Mie scattering calculation results for microwave radiative transfer modeling

In microwave radiative transfer model simulations, the Mie calculations usually consume the majority of the computer time necessary for the calculations (70 to 86 percent for frequencies ranging from 6.6 to 183 GHz). For a large array of atmospheric profiles, the repeated calculations of the Mie codes make the radiative transfer computations not only expensive, but sometimes impossible. It is desirable, therefore, to develop a set of Mie tables to replace the Mie codes for the designated ranges of temperature and frequency in the microwave radiative transfer calculation. Results of using the Mie tables in the transfer calculations show that the total CPU time (IBM 3081) used for the modeling simulation is reduced by a factor of 7 to 16, depending on the frequency. The tables are tested by computing the upwelling radiance of 144 atmospheric profiles generated by a 3-D cloud model (Tao, 1986). Results are compared with those using Mie quantities computed from the Mie codes. The bias and root-mean-square deviation (RMSD) of the model results using the Mie tables, in general, are less than 1 K except for 37 and 90 GHz. Overall, neither the bias nor RMSD is worse than 1.7 K for any frequency and any viewing angle.

Yeh, Hwa-Young M.↗

Precision slew/settle technologies for flexible spacecraft

Many spacecraft missions in the next decade will require both a high degree of agility and precision pointing. Agility includes both rotational maneuvering for retargeting and translational motion for orbit adjustment and threat avoidance. The major challenge associated with such missions is the need for control over a wide range of amplitudes and frequencies, ranging from tens of degrees at less than 1 Hz to a few micron radians at hundreds of Hz. TRW's internally funded Precision Control of Agile Spacecraft (PCAS) project is concerned with developing and validating in hardware the tools necessary to successfully complete the combined agile maneuvering/precision pointing missions. Development has been undertaken on a number of fronts for quietly slewing flexible structures. Various methods for designing slew torque profiles have been investigated. Prime candidates for slew/settle scenarios include Inverse Dynamics and Parameterized Function Space. Joint work with Processor Bayo at the University of California, Santa Barbara and Professor Flashner at the University of Southern California has led to promising torque profile design methods. Active and passive vibration suppression techniques also play a key role for rapid slew/settle mission scenarios. Active members with local control loops and passive members with high loss factor viscoelastic material have been selected for hardware verification. Progress in each of these areas produces large gains in the quiet slewing of flexible spacecraft. The main thrust of the effort to date has been the development of a modular testbed for hardware validation of the precision control concepts. The testbed is a slewing eighteen foot long flexible truss. Active and passive members can be interchanged with the baseline aluminum members to augment the inherent damping in the system. For precision control the active members utilize control laws running on a high speed digital structural control processor. Tip and midspan motions of the truss are determined using optical sensors while accelerometers can be used to monitor the motions of other points of interest. Preliminary results indicate that a mix of technologies produces the greatest benefit. For example, shaping the torque profile produces large improvements in slew/settle performance, but without added damping settling times may still be excessive. With the introduction of moderate amounts of damping, slew/settle performance is vastly improved. On the other hand, introducing damping without shaping the torque profile may not yield the desired level of performance.

Manning, R. A.↗

The Radio-to-X-Ray Spectrum of GRB 970508 on 1997 May 21.0 UT

We have reconstructed the spectrum of the afterglow of GRB 970508 on 1997 May 21.0 UT (12.1 days after the gamma-ray burst) on the basis of observations spanning the X-ray-to-radio range. The low-frequency power-law index of the spectrum, alpha = 0.44 +/- 0.07 (F(sub nu) proportional to nu(exp alpha)), is in agreement with the expected value alpha = 1/3 for optically thin synchrotron radiation. The 1.4 GHz emission is self-absorbed. We infer constraints on the break frequencies nu(sub c) and nu(sub m) on 1997 May 21.0 UT from a spectral transition from F(sub nu) approx. nu(exp -0.6) to F(sub nu) approx. nu(exp -1.1) in the optical passband around 1.4 days. A model of an adiabatically expanding, blast wave emitting synchrotron radiation, in which a significant fraction of the electrons cool rapidly, provides a successful and consistent description of the afterglow observations over nine decades in frequency, ranging in time from trigger until several months later.

Galama, T. J.↗

Collision-induced Absorption in the Infrared: A Data Base for Modelling Planetary and Stellar Atmospheres

Accurate knowledge of certain collision-induced absorption continua of molecular pairs such as H2-H2, H2-He, H2-CH4, CO2-CO2, etc., is a prerequisite for most spectral analyses and modelling attempts of atmospheres of planets and cold stars. We collect and regularly update simple, state of the art computer programs for the calculation of the absorption coefficient of such molecular pairs over a broad range of temperatures and frequencies, for the various rotovibrational bands. The computational results are in agreement with the existing laboratory measurements of such absorption continua, recorded with a spectral resolution of a few wavenumbers, but reliable computational results may be expected even in the far wings, and at temperatures for which laboratory measurements do not exist. Detailed information is given concerning the systems thus studied, the temperature and frequency ranges considered, the rotovibrational bands thus modelled, and how one may obtain copies of the FORTRAN77 computer programs by e-mail.

Borysow, Aleksandra↗

The Radio-to-X-Ray Spectrum of GRB 970508 on 1997 May 21.0 UT

We have reconstructed the spectrum of the afterglow of GRB 970508 on 1997 May 21.0 UT (12.1 days after the gamma-ray burst burst) on the basis of observations spanning, the X-ray-to-radio range. The low-frequency power-law index of the spectrum, alpha = 0.44 +/- 0.07 (F, proportional to nu(sup alpha)) is in agreement with the expected value alpha = 1/3 for optically thin synchrotron radiation. The 1.4 emission is self-absorbed. We infer constraints on the break frequencies nu(sub c) and nu(sub m) on 1997 May 21.0 UT from a spectral transition from F, approximately nu(sup -0.6) to F, approximately nu(sup -1.1) in the optical passband around 1.4 days. A model of an adiabatically expanding blast wave emitting synchrotrons radiation, in which a significant fraction of the electrons cool rapidly, provides a successful and consistent description of the afterglow observations over nine decades in frequency, ranging in time from trigger until several months later.

Galama, T. J.↗