Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometry optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Algorithms and analyses for stochastic optimization for turbofan noise reduction using parallel reduced-order modeling

Simulation-based optimization of acoustic liner design in a turbofan engine nacelle for noise reduction purposes can dramatically reduce the cost and time needed for experimental designs. Because uncertainties are inevitable in the design process, a stochastic optimization algorithm is posed based on the conditional value-at-risk measure so that an ideal acoustic liner impedance is determined that is robust in the presence of uncertainties. A parallel reduced-order modeling framework is developed that dramatically improves the computational efficiency of the stochastic optimization solver for a realistic nacelle geometry. The reduced stochastic optimization solver takes less than 500 s to execute. Additionally, well-posedness and finite element error analyses of the state system and optimization problem are provided.

97 MATHEMATICS AND COMPUTING↗

The impact of thermoelectric leg geometries on thermal resistance and power output

Thermoelectric devices enable direct, solid-state conversion of heat to electricity and vice versa. Rather than designing the shape of thermoelectric units or legs to maximize this energy conversion, the cuboid shape of these legs has instead remained unchanged in large part because of limitations in the standard manufacturing process. However, the advent of additive manufacturing (a technique in which freeform geometries are built up layer-by-layer) offers the potential to create unique thermoelectric leg geometries designed to optimize device performance. This work explores this new realm of novel leg geometry by simulating the thermal and electrical performance of various leg geometries such as prismatic, hollow, and layered structures. The simulations are performed for two materials, a standard bismuth telluride material found in current commercial modules and a higher manganese silicide material proposed for low cost energy conversion in high-temperature applications. The results include the temperature gradient and electrical potential developed across individual thermoelectric legs as well as thermoelectric modules with 16 legs. Even simple hollow and layered leg geometries result in larger temperature gradients and higher output powers than the traditional cuboid structure. As a result, the clear dependence of thermal resistance and power output on leg geometry provides compelling motivation to explore additive manufacturing of thermoelectric devices.

30 DIRECT ENERGY CONVERSION↗

Nonconvex Optimization and the High-Dimensional Geometry of Video [Slides]

Minimizing nonconvex penalty functions often produces better sparse solutions than ℓ 1 minimization. Using p-shrinkage and splitting allows this to be done very efficiently. Matrix decomposition methods can extract interesting features from high-dimensional data without explicit modeling. Important unsolved problems remain.

97 MATHEMATICS AND COMPUTING↗

Evaluation of Spray and Combustion Models for Simulating Dilute Combustion in a Direct-Injection Spark-Ignition Engine

Dilute combustion in spark-ignition engines has the potential to improve thermal efficiency by mitigating knock and by reducing throttling and wall heat losses. However, ignition and combustion processes can become unstable for dilute operation due to a lowered laminar flame speed, resulting in excessive cycle-to-cycle variability (CCV) of the combustion process. To compensate for the slower combustion in less reactive mixtures, a modified intake port geometry can be employed to generate a strong tumble flow in the cylinder and elevate turbulence levels around the spark plug, thereby promoting a faster transition to turbulent deflagration. Consequently, optimizing combustion chamber geometry and operating strategy is crucial to maximizing the benefits of using dilute combustion with enhanced in-cylinder turbulence across a wide range of operating conditions. Computational fluid dynamics (CFD) simulations can be utilized for virtual engine optimization tasks, but this would require the models to be truly predictive regarding the impact of changes to the engine design and operational parameters.In this study, multicycle large-eddy simulations (LES) are performed for a direct-injection spark-ignition engine to investigate the model performance in predicting engine combustion characteristics with respect to changes in the intake configuration. A tumble plate that blocks the lower part of the intake port inlet is used to vary the tumble. A set of CFD models that have been recently developed are employed, which takes into account the drag of nonspherical droplets, flash-boiling behavior of liquid sprays, spray-wall interaction, surrogate formulation of a research-grade E10 gasoline, and fast chemical kinetic solvers. Simulation results are compared to experimental engine data in terms of cylinder pressure, apparent heat release rate, mass fraction burned timing, and flame images. It is found that LES employing the state-of-the-art CFD models are capable of properly predicting the spray processes and reproducing the measured mean cylinder pressure for the case with the tumble plate. On the other hand, the LES over-predicts the combustion rate during the early combustion stage and under-estimates the CCV, and these discrepancies become larger when the tumble plate is removed.

computational fluid dynamics simulation↗

Optimization of Spin-Unrestricted Density Functional Theory for Redox Properties of Rubredoxin Redox Site Analogues

Systematic studies of the accuracy of density functional theory (DFT) methods, especially the recently developed hybrid generalized gradient approximation (GGA) functionals, for structural and energetic properties of iron-sulfur redox sites are essential before these methods can be used to answer important biological questions about these systems. Here, the geometries, electronic structures, and reduction potentials of redox site analogs of the iron-sulfur protein rubredoxin are investigated using DFT (B3LYP, B97gga1 and BHandH), the Moller-Plesset perturbation theory series (MP2, MP3, MP4SDQ), and coupled cluster (CCSD, CCSD(T)) methods. For the geometries of [Fe(SCH3)4]2-/1- and [Fe(SCH3)3]1-/0, the DFT optimizations give reasonable values and the inclusion of a core electron basis substantially reduces the errors in the calculated geometries. However, for the vertical detachment energy (VDE) and adiabatic detachment energy (ADE) of [Fe(SCH3)4]1- and [Fe(SCH3)3]1-, the B3LYP functional gives the most accurately computed ADE and VDE using DFT, which are comparable with those at the CCSD level of theory. When diffuse functions are added to the sulfur basis set, they have little effect on the geometry optimization but significantly improve the calculated VDE and ADE, which is important for the anionic reduced sites. When multiple polarization functions are added to the sulfur basis set, they lead to a slightly better description of the geometry by giving more angular flexibility but underestimate ADE and VDE, most likely due to overestimating the stabilizing energy of the oxidized sites. Overall, the B3LYP calculations with the more flexible full-core basis sets give a reasonable description both of the geometry and of the ADE and VDE. Thus, improving the basis sets seems to be an efficient and convenient way to obtain reliable reduction potentials of the high-spin iron-sulfur redox sites.

59 BASIC BIOLOGICAL SCIENCES↗

Modeling and Tool Wear in Routing of CFRP

This paper presents the prediction and evaluation of feed force in routing of carbon composite material. In order to extend tool life and improve quality of the machined surface, a better understanding of uncoated and coated tool behaviors is required. This work describes (1) the optimization of the geometry of multiple teeth tools minimizing the tool wear and the feed force, (2) the optimization of tool coating and (3) the development of a phenomenological model between the feed force, the routing parameters and the tool wear. The experimental results indicate that the feed rate, the cutting speed and the tool wear are the most significant factors affecting the feed force. In the case of multiple teeth tools, a particular geometry with 14 teeth right helix right cut and 11 teeth left helix right cut gives the best results. A thick AlTiN coating or a diamond coating can dramatically improve the tool life while minimizing the axial force, roughness and delamination. A wear model has then been developed based on an abrasive behavior of the tool. The model links the feed rate to the tool geometry parameters (tool diameter), to the process parameters (feed rate, cutting speed and depth of cut) and to the wear. The model presented has been verified by experimental tests.

36 MATERIALS SCIENCE↗

Regarding the optimization of O1-mode ECRH and the feasibility of EBW startup on NSTX-U

Recently published scenarios for fully non-inductive startup and operation on the National SphericalTorus eXperiment Upgrade (NSTX-U) (Menard et al 2012 Nucl. Fusion 52 083015) show ElectronCyclotron Resonance Heating (ECRH) as an important component in preparing a target plasma forefficient High Harmonic Fast Wave and Neutral Beam heating. The modeling of the propagation andabsorption of EC waves in the evolving plasma is required to define the most effective window ofoperation, and to optimize the launcher geometry for maximal heating and current drive during thiswindow. Here, we extend a previous optimization of O1-mode ECRH on NSTX-U to account for thefull time-dependent performance of the ECRH using simulations performed with TRANSP. We findthat the evolution of the density profile has a prominent role in the optimization by defining the timewindow of operation, which in certain cases may be a more important metric to compare launcherperformance than the average power absorption. This feature cannot be captured by analysis on staticprofiles, and should be accounted for when optimizing ECRH on any device that operates near thecutoff density. Additionally, the utility of the electron Bernstein wave (EBW) in driving current andgenerating closed flux surfaces in the early startup phase has been demonstrated on a number ofdevices. Using standalone GENRAY simulations, we find that efficient EBW current drive ispossible on NSTX-U if the injection angle is shifted below the midplane and aimed towards the tophalf of the vacuum vessel. However, collisional damping of the EBW is projected to be significant, insome cases accounting for up to 97% of the absorbed EBW power

Electron Bernstein wave↗

High-order entropy-based closures for linear transport in slab geometry II: A computational study of the optimization problem

We present a numerical algorithm to implement entropy-based (M{sub N}) moment models in the context of a simple, linear kinetic equation for particles moving through a material slab. The closure for these models - as is the case for all entropy-based models - is derived through the solution of constrained, convex optimization problem. The algorithm has two components. The first component is a discretization of the moment equations which preserves the set of realizable moments, thereby ensuring that the optimization problem has a solution (in exact arithmetic). The discretization is a second-order kinetic scheme which uses MUSCL-type limiting in space and a strong-stability-preserving, Runge-Kutta time integrator. The second component of the algorithm is a Newton-based solver for the dual optimization problem, which uses an adaptive quadrature to evaluate integrals in the dual objective and its derivatives. The accuracy of the numerical solution to the dual problem plays a key role in the time step restriction for the kinetic scheme. We study in detail the difficulties in the dual problem that arise near the boundary of realizable moments, where quadrature formulas are less reliable and the Hessian of the dual objection function is highly ill-conditioned. Extensive numerical experiments are performed to illustrate these difficulties. In cases where the dual problem becomes 'too difficult' to solve numerically, we propose a regularization technique to artificially move moments away from the realizable boundary in a way that still preserves local particle concentrations. We present results of numerical simulations for two challenging test problems in order to quantify the characteristics of the optimization solver and to investigate when and how frequently the regularization is needed.

99 GENERAL AND MISCELLANEOUS↗

Uniform convergence of an upwind discontinuous Galerkin method for solving scaled discrete-ordinate radiative transfer equations with isotropic scattering

Here we present an error analysis for the discontinuous Galerkin (DG) method applied to the discrete-ordinate discretization of the steady-state radiative transfer equation with isotropic scattering. Under some mild assumptions, we show that the DG method converges uniformly with respect to a scaling parameter which characterizes the strength of scattering in the system. However, the rate is not optimal and can be polluted by the presence of boundary layers. In one-dimensional slab geometries, we demonstrate optimal convergence when boundary layers are not present and analyze a simple strategy for balance interior and boundary layer errors. Some numerical tests are also provided in this reduced setting.

97 MATHEMATICS AND COMPUTING↗

MODELING MAGNETIC FIELD STRUCTURE OF A SOLAR ACTIVE REGION CORONA USING NONLINEAR FORCE-FREE FIELDS IN SPHERICAL GEOMETRY

We test a nonlinear force-free field (NLFFF) optimization code in spherical geometry using an analytical solution from Low and Lou. Several tests are run, ranging from idealized cases where exact vector field data are provided on all boundaries, to cases where noisy vector data are provided on only the lower boundary (approximating the solar problem). Analytical tests also show that the NLFFF code in the spherical geometry performs better than that in the Cartesian one when the field of view of the bottom boundary is large, say, 20 Degree-Sign Multiplication-Sign 20 Degree-Sign . Additionally, we apply the NLFFF model to an active region observed by the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory (SDO) both before and after an M8.7 flare. For each observation time, we initialize the models using potential field source surface (PFSS) extrapolations based on either a synoptic chart or a flux-dispersal model, and compare the resulting NLFFF models. The results show that NLFFF extrapolations using the flux-dispersal model as the boundary condition have slightly lower, therefore better, force-free, and divergence-free metrics, and contain larger free magnetic energy. By comparing the extrapolated magnetic field lines with the extreme ultraviolet (EUV) observations by the Atmospheric Imaging Assembly on board SDO, we find that the NLFFF performs better than the PFSS not only for the core field of the flare productive region, but also for large EUV loops higher than 50 Mm.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-T-31: Alternative VMAT Technique Reduces Total Monitor Units for Lung SBRT

Purpose: To investigate an alternative approach to VMAT optimization for hypofractionation lung treatment which increases average aperture opening and results in lower total Monitor Units (MU) without significantly sacrificing plan quality. Methods: Benchmark Volumetric Modulated Arc Therapy (bVMAT) plans were generated for 10 lung Stereotactic Body radiotherapy (SBRT) cases using Eclipse Version 11.0.42 (Varian Medical Systems) without a maximum MU constraint. Prescriptions ranged from 40 to 54Gy in 3 to 5 fractions. AAA dose calculation and PRO fluence based optimization was utilized. Two comparison VMAT plans were generated for each case, one that forced an initial “open” mlc aperture conformal to the tumor as a starting condition (oVMAT) with similar optimization parameters and arc geometries, and one that repeated the bVMAT optimization but added a maximum MU constraint (muVMAT). All plans used two arcs with lengths between 168 to 230 degrees. PTV D 95% and Dmean, lung V20 Gy, chest wall V30 Gy, average aperture opening and MU's were compared. Statistical significance was evaluated using Wilcoxon signed rank test. Results: Average PTV D(95), PTV mean and lung V20Gy over all plans was 99.2 ± 1.7%, 103.3 ± 0.6% and 7.8 ± 2.4% respectively. The average chest wall V30Gy was 61 ± 61 cc and ranged between 0 to 166 cc. There were no significant differences between the three techniques for the dosimetric quantities. MUs were reduced by 11 ±11% (p<0.01) and 25 ± 5% (p<0.01) and the average aperture size was increased by 13.7 ± 14% (p=0.02) and 35.8 ± 10% (p<0.01) with muVMAT and oVMAT, respectively, compared to bVMAT. Conclusion: oVMAT and muVMAT techniques were both able to increase average aperture size and reduce total MU compared to the benchmark VMAT plan, but the magnitude of the changes observed for oVMAT was larger.

60 APPLIED LIFE SCIENCES↗

Resolution Capabilities for Measurement of Fuel Swelling using Tomography

The miniature fuel (MiniFuel) irradiation experimental design at Oak Ridge National Laboratory (ORNL) enables irradiation testing of small fuel specimens in the High Flux Isotope Reactor (HFIR) in support of the Advanced Fuels Campaign (AFC). The first set of irradiated MiniFuel specimens will be available for post-irradiation examination this year. X-ray computed tomography (XCT) has been established as a viable method for determining the post-irradiation volume of the specimens and the corresponding swelling due to irradiation. The work described herein explored the resolution capabilities in using XCT to determine the volume of representative MiniFuel geometries. Strategies for optimization of the parameters used during the measurement and the uncertainty of the method according to specimen geometry are reported.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Regarding the optimization of O1-mode ECRH and the feasibility of EBW startup on NSTX-U

Recently published scenarios for fully non-inductive startup and operation on the National Spherical Torus eXperiment Upgrade (NSTX-U) [Menard J et al 2012 Nucl. Fusion 52 083015] show Electron Cyclotron Resonance Heating (ECRH) as an important component in preparing a target plasma for efficient High Harmonic Fast Wave and Neutral Beam heating. The modelling of the propagation and absorption of EC waves in the evolving plasma is required to define the most effective window of operation, and to optimize the launcher geometry for maximal heating and current drive during this window. Here in this paper, we extend a previous optimization of O1-mode ECRH on NSTX-U to account for the full time-dependent performance of the ECRH using simulations performed with TRANSP. We find that the evolution of the density profile has a prominent role in the optimization by defining the time window of operation, which in certain cases may be a more important metric to compare launcher performance than the average power absorption. This feature cannot be captured by analysis on static profiles, and should be accounted for when optimizing ECRH on any device that operates near the cutoff density. Additionally, the utility of the electron Bernstein wave (EBW) in driving current and generating closed flux surfaces in the early startup phase has been demonstrated on a number of devices. Using standalone GENRAY simulations, we find that efficient EBW current drive is possible on NSTX-U if the injection angle is shifted below the midplane and aimed towards the top half of the vacuum vessel. However, collisional damping of the EBW is projected to be significant, in some cases accounting for up to 97\% of the absorbed EBW power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimal arrangements of 1,3-diphenylisobenzofuran molecule pairs for fast singlet fission

A simplified version of the frontier orbital model has been applied to pairs of C 2 , C 2v , C s , and C 1 symmetry 1,3-diphenylisobenzofuran rotamers to determine their best packing for fast singlet fission (SF). For each rotamer the square of the electronic matrix element for SF was calculated at 2.2 × 10 9 pair geometries and a few thousand most significant physically accessible local maxima were identified in the six-dimensional space of mutual arrangements. At these pair geometries, SF energy balance was evaluated, relative SF rate constants were approximated using Marcus theory, and the SF rate constant k SF was maximized by further optimization of the geometry of the molecular pair. The process resulted in 142, 67, 214, and 291 unique geometries for the C 2 , C 2v , C s , and C 1 symmetry molecular pairs, respectively, predicted to be superior to the C 2 symmetrized known crystal pair structure. Furthermore, these optimized pair geometries and their triplet biexciton binding energies are reported as targets for crystal engineering and/or covalent dimer synthesis, and as possible starting points for high-level pair geometry optimizations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Creating Small Gas Bubbles in Flowing Mercury Using Turbulence at an Orifice

Pressure waves created in liquid mercury pulsed spallation targets have been shown to create cavitation damage to the target container. One way to mitigate such damage would be to absorb the pressure pulse energy into a dispersed population of small bubbles, however, creating such a population in mercury is difficult due to the high surface tension and particularly the non-wetting behavior of mercury on gas-injection hardware. If the larger injected gas bubbles can be broken down into small bubbles after they are introduced to the flow, then the material interface problem is avoided. Research at the Oak Ridge National Labarotory is underway to develop a technique that has shown potential to provide an adequate population of small-enough bubbles to a flowing spallation target. This technique involves gas injection at an orifice of a geometry that is optimized to the turbulence intensity and pressure distribution of the flow, while avoiding coalescence of gas at injection sites. The most successful geometry thus far can be described as a square-toothed orifice having a 2.5 bar pressure drop in the nominal flow of 12 L/s for one of the target inlet legs. High-speed video and high-resolution photography have been used to quantify the bubble population on the surface of the mercury downstream of the gas injection sight. Also, computational fluid dynamics has been used to optimize the dimensions of the toothed orifice based on a RANS computed mean flow including turbulent energies such that the turbulent dissipation and pressure field are best suited for turbulent break-up of the gas bubbles.

43 PARTICLE ACCELERATORS↗

Development of CSG-based radiation shielding module for ARCHER: preliminary results for photons - Paper 126

ARCHER is a parallel Monte Carlo radiation transport code being developed for various hardware platforms including multi-core CPUs, the emerging Nvidia graphics processing units (GPUs) and Intel Xeon Phi coprocessors. Previous studies have demonstrated the accuracy and speed for CT imaging and radiotherapy dosimetry applications. Radiation shielding applications, however, require ARCHER to be more flexible in defining and handling geometries, in addition to the voxel phantom geometries that are commonly used in medical physics calculations. In this paper, we present the development of a general geometry module used for radiation protection and shielding problems in ARCHER. The methods of geometry design and particle transport for the GPUs are introduced. Preliminary results comparing against the MCNP code for cases involving Cs-137 0.662 MeV gammas are reported. The radiation shielding design module of ARCHER has been developed, which supports general geometry setups in the CSG format. The code was implemented using CUDA on Nvidia GPUs, and the performance was benchmarked against the MCNP code for a simple radiation shielding problem. Results showed that ARCHER worked properly and achieved impressive speedup due to highly parallel computing nature of the Nvidia GPUs compared to the MCNP code running on multi-core CPUs. Further optimization of the geometry module will be carried out using advanced geometry structures and variance reduction techniques to improve the precision and performance of ARCHER. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

SU-F-T-583: Comparison of EBT3 Radiochromic Film Densitometry with Narrow Bandwidth LED Source in Point, Slot and Full Aperture Geometries

Purpose: Film densitometers optimized for radiochromic EBT3 film are not commercially available and flatbed document scanners are limited by broad spectral overlap of the red green and blue channels and polarization effects. Non-polarized, narrow bandwith, intensity stabilized light emitting diode (LED) light sources were constructed and transmission measurements compared for point, slot and full aperture geometries. Methods: LED’s with 10 nm bandwidths were focused to 1 mm spots for point scanning. The LED’s back-illuminated a 6 mm diameter diffuser near the focal point of a 25 cm diameter Fresnel lens for slot and full aperture transmission imaging. Films were located at the aperture plane, 15 cm from the lens and imaged with a 16 bit digital camera with 50 mm lens. Sheets, 10×8 cm, were irradiated to 25 Gy with a 4×4 cm 6 MV photon beam. Transmission measurements with a 633nm, linearly polarized laser were used as lowacceptance angle reference geometry. Results: LED intensity stabilized to <1% within one minute of startup. The useful transmission range increased as the acceptance angle decreased, laser(∼2%)> spot(∼3%)> slot(∼5%)> full aperture(∼10%). The Fresnel lens introduced a 4-fold polarization symmetry that increased radially causing a 2% change in transmission at 10 cm from the optic axis for EBT3 film. Polarized spot densitometer and laser transmission were similar. Conclusion: Spectrally filtered LED sources were effective for transmission measurements of radiochromic films. Because of polarization sensitivity of EBT3 film, the scanning spot geometry is the most general for measuring unpolarised transmission of larger film sizes, ie > 15×15 cm. Due to EBT3 film scatter, spot scanning should provide the most accurate profiles of high dose gradients, for a given acceptance angle. The spot scanning densitometer provided useful transmission to ∼5, 25, >25 Gy with 635, 590 and 530 nm light respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗