Search NASA⌕ Search

SEARCH · Search NASA

Results for “interfacial processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Developing a Multiscale Test Approach for Characterizing Polymer Composites

A systematic series of experimental characterization efforts have been applied to a novel advanced fiber reinforced nanocomposite material composed of carbon fiber doped with carbon nanotubes in a thermoplastic polymer. A novel depositional process has been developed and refined in order to obtain homogeneous and isotropic dispersion of the CNTs onto the interfacial surface of interest. Fracture mechanics characterization efforts under Mode I and Mode II loading have been investigated to quantify critical strain energy release rate values and study the complex fracture processes. Finite element simulations have complimented the fracture analysis in order to elucidate mechanisms at work during the precipitation and propagation. Thermal analytical responses have been measured using differential scanning calorimetry and thermal gravimetric analysis, while temperature dependent viscoelastic properties have been characterized through variable amplitude dynamic mechanical analysis. Significant increases in the energy absorption characteristics during deformation and fracture behavior have been directly measured for this CNT enhanced material system. This CNT modified CFRP material shows extreme promise for improving interply adhesion and inhibiting delamination.

36 MATERIALS SCIENCE↗

Interfacial Layer Growth Condition Dependent Electrical Conduction in HfO2/SiO2 Heterostructured Thin Films

The electrical conduction mechanism contributing to the leakage current at different field regions has been studied in this work. The current-voltage (I-V) measurement of TiN/HfO{sub 2}/SiO{sub 2}/P-Si nMOS capacitor has been taken for two different interfacial layer (SiO{sub 2}) growth conditions such as in situ steam grown (ISSG) and chemical processes. It is observed that Poole-Frenkel mechanism is the dominant conduction mechanism in high field region whereas Ohmic conduction is dominant in the low field region. Also it is seen that the gate leakage current is reduced for the devices having chemically grown interfacial layer compared to that of ISSG devices. Both trap energy level ({phi}{sub t}) and activation energy (E{sub a}) increase in the chemically grown interfacial layer devices for the Poole-Frenkel and Ohmic conduction mechanisms respectively in comparison to ISSG devices. Trap energy level ({phi}{sub t}) of {approx} 0.2 eV, obtained from Poole-Frenkel mechanism indicates that the doubly ionized oxygen vacancies (V{sup 2-}) are the active defects and are contributing to the leakage current in these devices.

14 SOLAR ENERGY↗

Tool-workpiece stick-slip conditions and their effects on torque and heat generation rate in the friction stir welding

Friction stir welding (FSW) has found increased applications in automotive and aerospace industries due to its advantages of solid-state bonding, no fusion and melting, and versatility in various working conditions and material combinations. However, the relationship among processing parameters, material properties, and bonding extent and fidelity remains largely empirical, primarily because of the lack of the mechanistic understanding of the tool-workpiece frictional behavior that affects our subsequent understanding of microstructural evolution and interface bonding formation. While the tool-workpiece stick-slip condition is believed to dictate the resulting torque and heat generation rate during the welding process, it remains rare and elusive to conduct a quantitative experimental measurement of such interfacial field. On the other hand, numerical simulations based on Computational Fluid Dynamics (CFD) rely on ad hoc assumptions of interfacial pressure and shear-stress conditions, but predictions can only be validated via the medium- and far-range temperature field which is known to be insensitive to the interfacial frictional behavior. This work first presents a comparison among two CFD-based simulation methodologies and the Coupled Eulerian Lagrangian (CEL) model in finite element method, the last of which uses the Coulomb friction so that the stick-slip is naturally developed. Based on the Hill-Bower similarity relationship in the contact analysis, an analytical model is developed here to prove why a constant stick-slip fraction will be developed in the steady state, to correlate the stick-slip fraction to processing parameters such as the tool spin rate, and further to derive dimensionless functions for torque and heat-generation-rate predictions. Pros and cons of various numerical approaches in predicting stick-slip are discussed, and our analytical model has been found to agree well with our numerical simulation and literature experimental results. These analyses provide the critical strain-rate and temperature fields that are needed for the bonding analysis in our future work.

36 MATERIALS SCIENCE↗

Microscopic nonequilibrium energy transfer dynamics in a photoexcited metal/insulator heterostructure

The element specificity of soft x-ray spectroscopy makes it an ideal tool for analyzing the microscopic origin of ultrafast dynamics induced by localized optical excitation in metal-insulator heterostructures. As such, using [Fe/MgO]$_n$ as a model system, we perform ultraviolet pump/soft x-ray probe experiments, which are sensitive to all constituents of these heterostructures, to probe both electronic and lattice excitations. Complementary ultrafast electron diffraction experiments independently analyze the lattice dynamics of the Fe constituent, and together with ab initio calculations yield comprehensive insight into the microscopic processes leading to local relaxation within a single constituent or nonlocal relaxation between two constituents. Besides electronic excitations in Fe, which are monitored at the Fe L 3 absorption edge and relax within 1 ps by electron-phonon coupling, soft x-ray analysis identifies a change at the oxygen K absorption edge of theMgO layers which occurs within 0.5 ps. This ultrafast energy transfer across the Fe-MgO interface is mediated by high-frequency, interface vibrational modes, which are excited by hot electrons in Fe and couple to vibrations in MgO in a mode-selective, nonthermal manner. A second, slower timescale is identified at the oxygen K pre-edge and the Fe L 3 edge. The slower process represents energy transfer by acoustic phonons and contributes to thermalization of the entire heterostructure. We thus find that the interfacial energy transfer is associated with nonequilibrium behavior in the phonon system. Because our experiments lack signatures of charge transfer across the interface, we conclude that phonon-mediated processes dominate the competition of electronic and lattice excitations in these nonlocal, nonequilibrium dynamics.

36 MATERIALS SCIENCE↗

Pore scale study of multiphase multicomponent reactive transport during CO 2 dissolution trapping

Solubility trapping is crucial for permanent CO 2 sequestration in deep saline aquifers. For the first time, a pore-scale numerical method is developed to investigate coupled scCO 2 -water two-phase flow, multicomponent (CO 2 (aq), H + , HCO 3 – , CO 3 2 – and OH – ) mass transport, heterogeneous interfacial dissolution reaction, and homogeneous dissociation reactions. Pore-scale details of evolutions of multiphase distributions and concentration fields are presented and discussed. Time evolutions of several variables including averaged CO 2 (aq) concentration, scCO 2 saturation, and pH value are analyzed. Specific interfacial length, an important variable which cannot be determined but is required by continuum models, is investigated in detail. Mass transport coefficient or efficient dissolution rate is also evaluated. The pore-scale results show strong non-equilibrium characteristics during solubility trapping due to non-uniform distributions of multiphase as well as slow mass transport process. Complicated coupling mechanisms between multiphase flow, mass transport and chemical reactions are also revealed. Lastly, effects of wettability are also studied. The pore-scale studies provide deep understanding of non-linear non-equilibrium multiple physicochemical processes during CO 2 solubility trapping processes, and also allow to quantitatively predict some important empirical relationships, such as saturation-interfacial surface area, for continuum models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of preheat temperature and post-process treatment on the microstructure and mechanical properties of stainless steel 410 made via ultrasonic additive manufacturing

Ultrasonic additive manufacturing (UAM) is a solid-state manufacturing technology for producing near-net shape metallic parts combining additive ultrasonic metal welding and subtractive machining. Even though UAM has been demonstrated to produce robust metal builds in Al–Al, Al–Ti, Al-steel, Cu–Cu, Al–Cu, and other material systems, UAM welding of high strength steels has proven challenging. This study investigates process and post-processing methods to improve UAM steel weld quality and demonstrates the UAM fabrication of stainless steel 410 (SS 410) builds which possess, after post-processing, mechanical properties comparable with bulk material. Unlike UAM fabrication of softer metals, this study shows that increasing the baseplate temperature from 38°C (100°F) to 204°C (400°F) improves interfacial strength and structural homogeneity of the UAM steel samples. Further improvement in strength is achieved through post-processing. The hot isostatic pressing (HIP) post treatment improves the shear strength of UAM samples to 344 MPa from 154 MPa for as-welded samples. Microstructural analyses with SEM and EBSD show no evidence of body centered cubic (BCC) ferrite to face centered cubic (FCC) austenite transformation taking place during UAM welding of SS 410. The weld quality improvement of UAM steel at higher baseplate temperatures is believed to be caused by the reduction of the yield strength of SS 410 at elevated temperature. Finaly, HIP treatment is shown to increase the overall hardness of UAM SS 410 from 204 ± 7 HV to 240 ± 16 HV due to the formation of local pockets of martensite. Nanohardness tests show that the top of layer n is harder than the bottom of layer n+1 due to grain boundary strengthening.

36 MATERIALS SCIENCE↗

Mechanical behavior of bimetallic stainless steel and gray cast iron repairs via directed energy deposition additive manufacturing

The utility of gray cast iron in engine components remains tied to the mechanical performance and cost. Repair and remanufacturing of castings offer economical and sustainable benefits; however, high thermal input from traditional fusion-based welding is unable to restore the original mechanical quality owing to brittle microstructures and porosity formed in situ. Directed energy deposition (DED) is an additive manufacturing method that has received considerable interest for repairs owing to the highly controllable nature of the process. Despite this, few works have connected the effect of DED parameters on actual interfacial strength. Consequently, distinct DED parameter combinations were identified to maximize the strength and fatigue life of the repaired cast iron. Further, high speed melt pool imaging and residual stress measurements are provided to aid in the understanding of the metallurgical quality and strength seen in these structures. In general, higher scanning speeds and lower thermal gradients promoted comparable tensile strength to that of the original gray cast iron. The results presented here provide a foundation to tune in the DED process to generate the required mechanical quality as a starting point for future process advancements.

36 MATERIALS SCIENCE↗

Electroless Formation of Hybrid Lithium Anodes for Fast Interfacial Ion Transport

Abstract Rechargeable batteries based on metallic anodes are of interest for fundamental and application‐focused studies of chemical and physical kinetics of liquids at solid interfaces. Approaches that allow facile creation of uniform coatings on these metals to prevent physical contact with liquid electrolytes, while enabling fast ion transport, are essential to address chemical instability of the anodes. Here, we report a simple electroless ion‐exchange chemistry for creating coatings of indium on lithium. By means of joint density functional theory and interfacial characterization experiments, we show that In coatings stabilize Li by multiple processes, including exceptionally fast surface diffusion of lithium ions and high chemical resistance to liquid electrolytes. Indium coatings also undergo reversible alloying reactions with lithium ions, facilitating design of high‐capacity hybrid In‐Li anodes that use both alloying and plating approaches for charge storage. By means of direct visualization, we further show that the coatings enable remarkably compact and uniform electrodeposition. The resultant In‐Li anodes are shown to exhibit minimal capacity fade in extended galvanostatic cycling when paired with commercial‐grade cathodes.

Choudhury, Snehashis↗

Electroless Formation of Hybrid Lithium Anodes for Fast Interfacial Ion Transport

Abstract Rechargeable batteries based on metallic anodes are of interest for fundamental and application‐focused studies of chemical and physical kinetics of liquids at solid interfaces. Approaches that allow facile creation of uniform coatings on these metals to prevent physical contact with liquid electrolytes, while enabling fast ion transport, are essential to address chemical instability of the anodes. Here, we report a simple electroless ion‐exchange chemistry for creating coatings of indium on lithium. By means of joint density functional theory and interfacial characterization experiments, we show that In coatings stabilize Li by multiple processes, including exceptionally fast surface diffusion of lithium ions and high chemical resistance to liquid electrolytes. Indium coatings also undergo reversible alloying reactions with lithium ions, facilitating design of high‐capacity hybrid In‐Li anodes that use both alloying and plating approaches for charge storage. By means of direct visualization, we further show that the coatings enable remarkably compact and uniform electrodeposition. The resultant In‐Li anodes are shown to exhibit minimal capacity fade in extended galvanostatic cycling when paired with commercial‐grade cathodes.

Choudhury, Snehashis↗

Changes in water vapor adsorption and water film thickness in clayey materials as a function of relative humidity

Abstract Soil water, with adsorbed water being an important component, plays an important role in fluid flow and chemical movement in the unsaturated zone. The adsorbed water consists of water film and interlayer water, and its content is related to the relative humidity (RH). This study theoretically and experimentally focuses on the variation in adsorbed water content in clayey materials as the RH changes. Based on a slit‐pore model, three types of water (water film, interlayer water, and capillary water) could be present in the water vapor adsorption process. The variation of water film is obtained from the analysis of interfacial forces, and then the total water content can be quantitatively subdivided into these three types of water for different RH values. The slit‐pore adsorption model was used with experimental measurements (water vapor adsorption and N 2 physisorption) to quantify the amounts and interrelationships of these three different types of water to six clayey materials, namely three clay minerals (kaolinite, montmorillonite, and illite–smectite mixed layer) and three clay‐rich sediments from the Jianghan Plain in China. The main results are that (a) the volumes of water vapor adsorption are much greater than those of N 2 adsorption except for kaolinite; (b) interlayer water largely dominates the growth of total water content in montmorillonite and results in a concentration of 0.090 ml g −1 at 95% RH; and (c) the minimum thickness of water film is calculated to be 0.23 nm, and the maximum value is one‐third of the pore width by considering the interfacial forces.

54 ENVIRONMENTAL SCIENCES↗

Transfer of an erbium ion across the water/dodecane interface: Structure and thermodynamics via molecular dynamics simulations

The thermodynamics and structural changes involved in the transfer of the Er 3+ ion across the water/dodecane interface are investigated by molecular dynamics simulations. We show that the Er 3+ ion is transferred as a highly conserved 8-water coordinated species and that the transfer involves significant perturbation of the interfacial water structure. Furthermore, several structural properties are used to quantify this process. Implications for the ion extraction process are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial structure and bonding mechanism of weld seams during porthole die extrusion of aluminum alloy profiles

Highlights: • Interfacial structures and bonding mechanisms of extrusion welds were studied. • Interfacial grain boundaries, amorphous layers and voids were found. • Bonding mechanisms in the absence/presence of a gas-pocket were proposed. • Voids closure, oxide films breaking and grain boundaries migration were discussed. - Abstract: Fine nanostructures of bonding interfaces of weld seams formed by porthole die extrusion in the absence/presence of a gas-pocket behind the bridge of the extrusion die were systematically studied to understand the underlying interfacial bonding mechanisms. Interfacial grain boundaries, nanoscale amorphous layers, and three kinds of new interfacial structures were found. Specifically, it was found that, in the absence of a gas-pocket behind the bridge, there are two distinctly different interfacial structures. For the first kind of bonding interface, interfacial grain boundaries exist in contact areas and micro-voids exist in non-contact areas. For the second kind of bonding interface, there are no interfacial grain boundaries in contact areas and only nanoscale micro-voids exist in non-contact areas. In the presence of a gas-pocket behind the bridge, nanoscale voids and amorphous layers exist at the bonding interface. It was also found that the formation of gas-pockets can be avoided by increasing the depth of the welding chamber, and the increase of the welding chamber's depth and extrusion speed also contributes to the volume reduction of micro-voids and the migration of grain boundaries at the bonding interface, so as to improve the welding quality of weld seams. Based on the experimental findings, two interfacial bonding mechanisms corresponding to the absence/presence of a gas-pocket are proposed. The specific behavior of micro-asperities contact, micro-voids closure, oxide films breaking and interfacial grain boundaries migration are described, and the solid-state bonding process during porthole die extrusion is revealed from the micro-nano scales.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Intercalation of Lithium into Graphite: Insights from First-Principles Simulations

Understanding ion intercalation at electrode–electrolyte interfaces is key to the development of energy storage and water desalination. Here, we investigate Li + kinetics at a prototypical interface between graphite anodes and an organic electrolyte, and we elucidate key factors that determine ion transport, using first-principles methodology coupling ab initio molecular dynamics simulations with a solvation model. We show that surface chemical composition significantly influences the kinetics of ion intercalation from the liquid into graphite. We find that this is partly related to the ion desolvation process, which varies notably for different graphite surface chemical terminations. In addition, interfacial polarization is found to play an important role in determining energy barriers for ion transfer. We also discuss the impact of electrode potentials, which is often neglected in conventional first-principles calculations despite being a key factor in device configurations. Our study provides insights into the coupling of electronic and ionic effects of interfacial chemistry on ion transport at complex electrode–electrolyte interfaces.

25 ENERGY STORAGE↗

Counterintuitive Catalytic Reactivity of the Aluminum Oxide “Passivation” Shell of Aluminum Nanoparticles Facilitating the Thermal Decomposition of exo -Tetrahydrodicyclopentadiene (JP-10)

High energy density aluminum nanoparticles (AlNP) have been at the center of attention as additives to hydrocarbon jet fuels like exo-tetrahydrodicyclopentadiene (JP-10, C 10 H 16 ) aiming at a superior performance of volume-limited air-breathing propulsion systems. However, a fundamental understanding of the ignition and combustion chemistry of JP-10 in presence of AlNPs has been elusive. Exploiting an isomer-selective comprehensive identification of the decomposition products in a newly designed high temperature chemical microreactor coupled to vacuum ultraviolet photoionization, we reveal an active low temperature heterogeneous surface chemistry commencing at 650 K involving the alumina (Al 2 O 3 ) shell. Contrary to textbook knowledge of an “inactive alumina surface”, this unconventional reactivity, where oxygen is transferred from alumina to JP-10, leads to generating cyclic, oxygenated organics like phenol (C 6 H 5 OH) and 2,4-cyclopentadiene-1-one (C 5 H 4 O) - key tracers of an alumina-mediated interfacial chemistry. Furthermore, this counterintuitive reactivity transforms our knowledge on the (catalytic) processes of alumina-coated AlNPs on the molecular level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Challenge-driven printing strategies toward high-performance solid-state lithium batteries

Solid-state lithium batteries (SSLBs) are promising candidates for replacing traditional liquid-based Li-ion batteries and revolutionizing battery systems for electric vehicles and portable devices. However, longstanding issues such as form factors, interfacial contact resistance, balance between ion conductivity and mechanical strength, and manufacturing processability limit their applications. In this review we present how advanced printing technologies can help to mitigate typical problems in main components of SSLBs and improve device performance. Here we first introduce the common printing techniques for energy storage devices, then focus on the issues and corresponding printing strategies for anodes, cathodes, and solid-state electrolytes to guide the construction of energy-dense, free-form SSLBs. The features and effects of the printed structures are emphasized, as well. We conclude by discussing the problems associated with printing technologies and the potential research directions for printed solid-state batteries.

25 ENERGY STORAGE↗

Investigation of GaN-on-GaN vertical p - n diode with regrown p -GaN by metalorganic chemical vapor deposition

Here, to mimic selective-area doping, p -GaN was regrown on an etched GaN surface on GaN substrates by metalorganic chemical vapor deposition. Vertical GaN-on-GaN p - n diodes were fabricated to investigate the effects of the etch-then-regrowth process on device performance. The crystal quality of the sample after each epitaxial step was characterized by X-ray diffraction, where the etch-then-regrowth process led to a very slight increase in edge dislocations. A regrowth interfacial layer was clearly shown by transmission electron microscopy. Strong electroluminescence was observed with three emission peaks at 2.2 eV, 2.8 eV and 3.0 eV, respectively. The forward current density increased slightly with the increasing temperature, while the reverse current density was almost temperature independent indicating tunneling as the reverse transport mechanism. This result is very similar to the reported Zener tunnel diode comprising a high doping profile at the junction interface. High levels of silicon and oxygen concentrations were observed at the regrowth interface with a distribution width of ~100 nm. This work provides valuable information of p -GaN regrowth and regrown GaN p - n diodes, which can serve as an important reference for developing selective doping for advanced GaN power electronics for high voltage and high power applications.

42 ENGINEERING↗

Time-domain terahertz emission spectroscopy on van der Waals materials

Time-domain terahertz (THz) emission spectroscopy provides a direct method to probe transient photo-currents by recording the emitted terahertz electric field. Although the basic principles of THz surface emission have been understood for more than 30 years, the constant progress in ultrafast laser science to ever shorter pulses, the development of new materials and enhanced sensitivity promote THz emission spectroscopy as a reliable method to gain insights into charge carrier dynamics with unprecedented precision. It provides a versatile tool to study ultrafast processes, such as plasmon-driven hot carriers, dynamics of Dirac fermions, interfacial charge transfer, coherent phonon emission and quantum beating, to name only a few. However, despite the rapidly growing body of research on van der Waals materials, especially in their low-dimensional limit, THz emission spectroscopy has only been applied to a limited extent in these material systems. In this prospective, we review time-domain THz emission spectroscopy as a complementary approach to probe ultrafast charge carrier dynamics and the material’s nonlinear response. After a description of the experimental method, we report on THz emission spectroscopy of bulk and 2D van der Waals materials with special focus on graphene and transition metal dichalcogenide layers.

2D materials↗

The migration of fluid droplets and their interactions in a thermal gradient

When materials are processed in free fall, buoyant forces will be substantially reduced. Thus, the buoyant migration of droplets and bubbles which normally occurs on earth is expected to be overshadowed by migration due to other mechanisms in space processing. In particular, capillary forces on droplets due to the variation of interfacial tension around their periphery will play a significant role in governing their motion in space. While such interfacial tension gradients can be caused by thermal, compositional, and/or electrical gradients in the continuous phase, thermal gradients are convenient to use in controlled experimentation. On earth, due to interference from buoyant effects, it is difficult to study thermocapillary migration in sufficient detail. Also, the effects of a thermal gradient on the interactions among droplets are hard to study on Earth. Thus, an orbital facility for conducting experiments on the migration and interactions of fluid droplets in a continuous phase due to the action of a thermal gradient appears attractive.

Subramanian, R. S.↗