Search NASA⌕ Search

SEARCH · Search NASA

Results for “large structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Development of deployable structures for large space platforms. Volume 2: Design development

Design evolution, test article design, test article mass properties, and structural analysis of deployable platform systems are discussed. Orbit transfer vehicle (OTV) hangar development, OTV hangar concept selection, and manned module development are discussed. Deployable platform systems requirements, material data base, technology development needs, concept selection and deployable volume enclosures are also discussed.

Greenberg, H. S.↗

The topology of large-scale structure. II - Nonlinear evolution of Gaussian models

The evolution of non-Gaussian behavior in the large-scale universe from Gaussian initial conditions is studied. Topology measures developed in previous papers are applied to the smoothed initial, final, and biased matter distributions of cold dark matter, white noise, and massive neutrino simulations. When the smoothing length is approximately twice the mass correlation length or larger, the evolved models look like the initial conditions, suggesting that random phase hypotheses in cosmology can be tested with adequate data sets. When a smaller smoothing length is used, nonlinear effects are recovered, so nonlinear effects on topology can be detected in redshift surveys after smoothing at the mean intergalaxy separation. Hot dark matter models develop manifestly non-Gaussian behavior attributable to phase correlations, with a topology reminiscent of bubble or sheet distributions. Cold dark matter models remain Gaussian, and biasing does not disguise this.

Melott, Adrian L.↗

Orbital assembly and maintenance study. Executive summary

A sound, practical approach for the assembly and maintenance of very large structures in space is presented. The methods and approaches for assembling two large structures are examined. The maintenance objectives include the investigation of methods to maintain five geosynchronous satellites. The two assembly examples are a 200-meter-diameter radio astronomy telescope and a 1,000-meter-diameter microwave power transmission system. The radio astronomy telescope operates at an 8,000-mile altitude and receives RF signals from space. The microwave power transmission system is part of a solar power satellite that will be used to transmit converted solar energy to microwave ground receivers. Illustrations are included.

Gorman, D.↗

Examining Periodic Solar-Wind Density Structures Observed in the SECCHI Heliospheric Imagers

We present an analysis of small-scale, periodic, solar-wind density enhancements (length scales as small as approximately equals 1000 Mm) observed in images from the Heliospheric Imager (HI) aboard STEREO-A. We discuss their possible relationship to periodic fluctuations of the proton density that have been identified at 1 AU using in-situ plasma measurements. Specifically, Viall, Kepko, and Spence examined 11 years of in-situ solar-wind density measurements at 1 AU and demonstrated that not only turbulent structures, but also nonturbulent, periodic density structures exist in the solar wind with scale sizes of hundreds to one thousand Mm. In a subsequent paper, Viall, Spence, and Kasper analyzed the alpha-to-proton solar-wind abundance ratio measured during one such event of periodic density structures, demonstrating that the plasma behavior was highly suggestive that either temporally or spatially varying coronal source plasma created those density structures. Large periodic density structures observed at 1 AU, which were generated in the corona, can be observable in coronal and heliospheric white-light images if they possess sufficiently high density contrast. Indeed, we identify such periodic density structures as they enter the HI field of view and follow them as they advect with the solar wind through the images. The smaller, periodic density structures that we identify in the images are comparable in size to the larger structures analyzed in-situ at 1 AU, yielding further evidence that periodic density enhancements are a consequence of coronal activity as the solar wind is formed.

Viall, Nicholeen M.↗

Moon-Mercury - Large impact structures, isostasy and average crustal viscosity

It is shown that Mercury's surface has only 70% as many large craters (of at least 200 km in diameter) as the moon. The density of Mercurian impact craters having diameters over 400 km is 30% of that of the moon, and for craters with diameters between 400 and 700 km, Mercurian density is 21% of that of the moon. The size-frequency distribution curve of Mercury is the same as the lunar cumulative -2 slope. The Mercurian curve, however, lies well below the 10% surface saturation level of the lunar curve. This may indicate that the old, heavily-cratered Mercurian terrain is not presently in a state of cratering equilibrium. The differences in crater and basin densities observed between Mercury and the moon may be functions of crater-production rates or of different crustal histories. The total isostatic compensation of impact craters having diameters of about 800 km suggests that the average viscosity of the Mercurian crust during approximately the past 4 eons was the same as that of the moon.

Schaber, G.↗

Controlled multibody dynamics simulation for large space structures

Multibody dynamics discipline, and dynamic simulation in control structure interaction (CSI) design are discussed. The use, capabilities, and architecture of the Large Angle Transient Dynamics (LATDYN) code as a simulation tool are explained. A generic joint body with various types of hinge connections; finite element and element coordinate systems; results of a flexible beam spin-up on a plane; mini-mast deployment; space crane and robotic slewing manipulations; a potential CSI test article; and multibody benchmark experiments are also described.

Housner, J. M.↗

Range-Gated Metrology: An Ultra-Compact Sensor for Dimensional Stabilization

Point-to-point laser metrology systems can be used to stabilize large structures at the nanometer levels required for precision optical systems. Existing sensors are large and intrusive, however, with optical heads that consist of several optical elements and require multiple optical fiber connections. The use of point-to-point laser metrology has therefore been limited to applications where only a few gauges are needed and there is sufficient space to accommodate them. Range-Gated Metrology is a signal processing technique that preserves nanometer-level or better performance while enabling: (1) a greatly simplified optical head - a single fiber optic collimator - that can be made very compact, and (2) a single optical fiber connection that is readily multiplexed. This combination of features means that it will be straightforward and cost-effective to embed tens or hundreds of compact metrology gauges to stabilize a large structure. In this paper we describe the concept behind Range-Gated Metrology, demonstrate the performance in a laboratory environment, and give examples of how such a sensor system might be deployed.

laser metrology↗

Large-scale structural optimization

Problems encountered by aerospace designers in attempting to optimize whole aircraft are discussed, along with possible solutions. Large scale optimization, as opposed to component-by-component optimization, is hindered by computational costs, software inflexibility, concentration on a single, rather than trade-off, design methodology and the incompatibility of large-scale optimization with single program, single computer methods. The software problem can be approached by placing the full analysis outside of the optimization loop. Full analysis is then performed only periodically. Problem-dependent software can be removed from the generic code using a systems programming technique, and then embody the definitions of design variables, objective function and design constraints. Trade-off algorithms can be used at the design points to obtain quantitative answers. Finally, decomposing the large-scale problem into independent subproblems allows systematic optimization of the problems by an organization of people and machines.

Sobieszczanski-Sobieski, J.↗

Automated frequency domain system identification of a large space structure

This paper presents the development and experimental results of an automated on-orbit system identification method for large flexible spacecraft that yields estimated quantities to support on-line design and tuning of robust high performance control systems. The procedure consists of applying an input to the plant, obtaining an output, and then conducting nonparametric identification to yield the spectral estimate of the system transfer function. A parametric model is determined by curve fitting the spectral estimate to a rational transfer function. The identification method has been demonstrated experimentally on the Large Spacecraft Control Laboratory in JPL.

Yam, Y.↗

CHIME/FRB Catalog 1 Results: Statistical Cross-correlations with Large-scale Structure

The CHIME/FRB Project has recently released its first catalog of fast radio bursts (FRBs), containing 492 unique sources. Here, we present results from angular cross-correlations of CHIME/FRB sources with galaxy catalogs. We find a statistically significant (p-value ~ 10 –4 , accounting for look-elsewhere factors) cross-correlation between CHIME FRBs and galaxies in the redshift range 0.3 ≲ z ≲ 0.5, in three photometric galaxy surveys: WISE × SCOS, DESI-BGS, and DESI-LRG. The level of cross-correlation is consistent with an order-one fraction of the CHIME FRBs being in the same dark matter halos as survey galaxies in this redshift range. We find statistical evidence for a population of FRBs with large host dispersion measure (~400 pc cm –3 ) and show that this can plausibly arise from gas in large halos (M ~ 10 14 M ⊙ ), for FRBs near the halo center (r ≲ 100 kpc). These results will improve in future CHIME/FRB catalogs, with more FRBs and better angular resolution.

79 ASTRONOMY AND ASTROPHYSICS↗

Requirements for a mobile communications satellite system. Volume 3: Large space structures measurements study

This study report defines a set of tests and measurements required to characterize the performance of a Large Space System (LSS), and to scale this data to other LSS satellites. Requirements from the Mobile Communication Satellite (MSAT) configurations derived in the parent study were used. MSAT utilizes a large, mesh deployable antenna, and encompasses a significant range of LSS technology issues in the areas of structural/dynamics, control, and performance predictability. In this study, performance requirements were developed for the antenna. Special emphasis was placed on antenna surface accuracy, and pointing stability. Instrumentation and measurement systems, applicable to LSS, were selected from existing or on-going technology developments. Laser ranging and angulation systems, presently in breadboard status, form the backbone of the measurements. Following this, a set of ground, STS, and GEO-operational were investigated. A third scale (15 meter) antenna system as selected for ground characterization followed by STS flight technology development. This selection ensures analytical scaling from ground-to-orbit, and size scaling. Other benefits are cost and ability to perform reasonable ground tests. Detail costing of the various tests and measurement systems were derived and are included in the report.

Akle, W.↗

Collapsible and Deployable Trusses

Cable-controlled mechanisms allow large structures stored in small spaces. Combination of telescoping struts and pivot points allows very large structure collapsed into very small one. Concept used not only for straight but for tapered or curved ones as well. Structure adaptable to terrestrial uses as portable towers, scaffolds, and bridge beams folded compactly for transportation or storage.

Nelson, R. A.↗

Validation of large space structures by ground tests

The paper presents concepts designed to validate, through the use of ground tests, mathematical models of continuous type structures and structures comprised of interconnecting subsystems. For continuous-type structures, a multiple boundary condition test approach is considered in which the basic idea is to perform a large number of tests using artificial boundary conditions from which good ground test data can be obtained. The test ensures an arbitrarily large number of test data for use in the validation and updating of the mathematical model. Another approach, applicable to structures comprised of subsystems, involves the identification of significant structural elements for the system dynamic model which are not validated by standard modal tests of the subsystems.

Wada, B. K.↗

Study of utilization of advanced composites in fuselage structures of large transports

The effort required by the transport aircraft manufacturers to support the introduction of advanced composite materials into the fuselage structure of future commercial and military transport aircraft is investigated. Technology issues, potential benefits to military life cycle costs and commercial operating costs, and development plans are examined. The most urgent technology issues defined are impact dynamics, acoustic transmission, pressure containment and damage tolerance, post-buckling, cutouts, and joints and splices. A technology demonstration program is defined and a rough cost and schedule identified. The fabrication and test of a full-scale fuselage barrel section is presented. Commercial and military benefits are identified. Fuselage structure weight savings from use of advanced composites are 16.4 percent for the commercial and 21.8 percent for the military. For the all-composite airplanes the savings are 26 percent and 29 percent, respectively. Commercial/operating costs are reduced by 5 percent for the all-composite airplane and military life cycle costs by 10 percent.

Jackson, A. C.↗

A forecast for large-scale structure constraints on Horndeski gravity with CO line intensity mapping

Here we consider the potential for line intensity mapping (LIM) of the rotational CO(1-0), CO(2-1), and CO(3-2) transitions to detect deviations from General Relativity from 0 < z < 3 within the framework of a very general class of modified gravity models, called Horndeski’s theories. Our forecast assumes a multitracer analysis separately obtaining information from the matter power spectrum and the first two multipoles of the redshift space distortion power spectrum. To achieve ±0.1 level constraints on the slope of the kinetic gravity braiding and Planck mass evolution parameters, a mm-wave LIM experiment would need to accumulate ≈10 8 –10 9 spectrometre-hours, feasible with instruments that could be deployed in the 2030s. Such a measurement would constrain the parameters of Horndeski’s theory at a level at worst competitive to and at best an order of magnitude tighter than existing constraints from the CMB and LSS. Our modelling code is publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗

Optimum placement of controls for static deformations of space structures

Many large space structures, such as large antennas, have to maintain a fairly exact shape to operate satisfactorily. Such structures require active and passive controls to maintain their accurate shape under disturbances. The present paper is concerned with optimum placement of controls for correcting static deformations. Both force actuators and heaters are considered for controls. A formulation of design against the worst disturbance is derived. A beam example is employed to demonstrate the procedure.

Haftka, R. T.↗

F region electron density irregularity spectra near auroral acceleration and shear regions

Two orbits of the Atmosphere Explorer D yielded data on F region electron irregularities in the high latitude ionosphere. Data were taken with a retarding potential analyzer, an ion drift meter, a low energy electron experiment and a photoelectron spectrometer. Auroral forms were simultaneously visually sighted by DMSP spacecraft. The irregularities were associated with auroral excitation and large structured flow regions. Steep spectra with one-dimensional spectral index values for wavelengths over 1 km were observed in the acceleration region. Large amplitude irregularities appeared in large structured flow regions and displayed shallow spectra, indicating the presence of large power spectral densities at scale lengths of about 100 m. It is suspected that large velocities or shears in the velocities in adjacent precipitation regions cause the F region density perturbations.

Basu, S.↗