Search NASA⌕ Search

SEARCH · Search NASA

Results for “material parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Integrating Advanced Modeling and Accelerated Testing for a Modernized Fuel Qualification Paradigm

With the increasing interest in sodium fast reactor technology, as seen by applications to the U.S. Nuclear Regulatory Commission for the OKLO Aurora plant, fuel testing for the TerraPower Traveling Wave Reactor, and the impending construction and startup of the versatile test reactor (VTR), a modernized, accelerated approach to fuel qualification is needed. To guide this effort, a Phenomena Identification Ranking Table–styled analysis was performed for a U-Pu-Zr sodium-free annular fuel system. This analysis evaluated a series of fuel design properties and parameters against their contributions to key fuel performance phenomena. The resulting priority parameters were then reviewed against existing modeling and experimental capabilities to support investigation of the highest-priority parameters. A pathway for qualification was then established using highthroughput, high-volume experiments from MiniFuel and FAST in parallel with advanced physics-based model development. This effort outlines how the first stages of qualification can be reduced from the typical 20+-year development cycle to 5 to 7 years by deploying accelerated irradiation testing platforms. As with any accelerated test, these methods are prototypic in some aspects and less so in others; however, by coupling with advanced fuel performance modeling and simulation capabilities, the larger space of irradiation parameters and material response provided offers advantages for the validation of physics-based models supporting the deployment of novel fuel designs. As a test case, this paper utilizes a proposed Mark II fuel system for the upcoming VTR. Thus, an accelerated qualification method can be tested for the development of MARK II driver fuel so that by the time of VTR startup, lead test assemblies for a Mark II fuel can be initiated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

The 20-nm Skyrmion Generated at Room Temperature by Spin-Orbit Torques

The discovery of magnetic skyrmions provides a promising pathway for developing functional spintronic memory and logic devices. Towards the future high-density memory application, nanoscale skyrmions with miniaturized diameters, ideally down to 20 nm are required. Using x-ray magnetic circular dichroism transmission microscopy, nanoscale skyrmions are observed in the [Pt/Co/Ir] 15 multilayer at room temperature. In particular, small skyrmions with minimum diameters approaching 20 nm could be generated by the current-induced spin-orbit torques. Through implementing material specific parameters, the dynamic process of skyrmion generation is further investigated by performing micromagnetic simulations. According to the simulation results, we find that both the tube-like Néel-type skyrmions and the bobber-like Néel-type skyrmions can be electrically generated. In particular, the size of the bobber-like Néel-type skyrmions can be effectively reduced by the spin-orbit torques, which leads to the formation of 20 nm Néel-type skyrmions. In conclusion, our findings could be important for understanding the formation dynamics of nanoscale Néel-type spin textures, skyrmions and bobber in particular, which could also be useful for promoting nanoscale skyrmionic memories and logic devices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Parametric study of Alfvénic instabilities driven by runaway electrons during the current quench in DIII-D

Abstract To avoid or mitigate runaway electron (RE) beams in ITER, RE-driven instabilities are actively studied as a complimentary technique to massive material injection. In this work we report experimental dependencies of Alfvénic instabilities driven by REs during the current quench in DIII-D on plasma and material injection parameters. These instabilities, observed in the frequency range of 0.1–3 MHz, correlate with increased RE loss and thus may play a role in non-sustained RE beams. It was found that as the toroidal magnetic field ( B T ) decreases, the RE population becomes more energetic, the energy of instabilities increases, and no RE beam is observed when the maximum energy of REs exceeds 15 MeV (or when B T is below 1.8 T). Analysis of disruptions at plasma core temperature ( T e ) of 1 keV and 8 keV shows that the RE population is much less energetic (with the maximum energy of only about 3 MeV) when T e is high, and no instabilities are observed in this case. Besides disruptions above caused by Ar injection, cases with Ne and D 2 injections were also studied. Both Ne and D 2 injections cause no sustained RE beams, however, for different reasons. Measurements of the instability polarization indicate that it is of predominantly compressional nature at the edge, which is consistent with modeling suggesting excitation of compressional Alfvén eigenmodes. However, drive of global Alfvén eigenmodes is also possible at low frequencies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Thickness-independent transport in thin (001)-oriented cadmium arsenide films

The three-dimensional Dirac semimetal is a parent phase for a variety of topological phases that can be generated by tuning parameters in material growth or device operation. Notably, it has recently been found that cadmium arsenide, which is ordinarily a three-dimensional Dirac semimetal, can nevertheless realize a three-dimensional topological insulator in (001)-oriented films about 50-nm thick. In this work, we study the quantum Hall effect in thin (001)-oriented cadmium arsenide films, their thickness ranging from 12 to 24 nm. When the carrier density is kept approximately constant across the different films, quantum transport reveals an identical underlying picture. The result is shown to be consistent with the transport's origin in the surface states of a three-dimensional topological insulator, but problematic for a perspective in which the quantum Hall effect originates from the confined subbands of the bulk band structure. As a result, these thin-film results complement previous studies of the quantum Hall effect in 50-nm-thick films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Phonon Screening of Excitons in Semiconductors: Halide Perovskites and Beyond

The ab initio Bethe-Salpeter equation (BSE) approach, an established method for the study of excitons in materials, is typically solved in a limit where only static screening from electrons is captured. Here, we generalize this framework to include dynamical screening from phonons at lowest order in the electron-phonon interaction. We apply this generalized BSE approach to a series of inorganic lead halide perovskites, CsPbX 3 , with X=Cl, Br, and I. We find that inclusion of screening from phonons significantly reduces the computed exciton binding energies of these systems. By deriving a simple expression for phonon screening effects, we reveal general trends for their importance in semiconductors and insulators, based on a hydrogenic exciton model. We demonstrate that the magnitude of the phonon screening correction in isotropic materials can be reliably predicted using four material specific parameters: the reduced effective mass, static and optical dielectric constants, and frequency of the most strongly coupled longitudinal-optical phonon mode. Finally, this framework helps to elucidate the importance of phonon screening and its relation to excitonic properties in a broad class of semiconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Predictive numerical modeling of plasma-induced surface roughness and wettability evolution in LM-PAEK/CF tape

Plasma surface modification effectively enhances adhesion in thermoplastic composites, yet its impacts on high-performance polymers like low-melting polyaryletherketone (LM-PAEK) remain inadequately quantified. Here, this study integrates experimental analysis and numerical modeling to characterize surface roughness and wettability changes in LM-PAEK/carbon fiber composites treated with atmospheric plasma. Atomic Force Microscopy quantified surface topography (n = 10 per condition for contact angles), while static contact-angle assessments measured wettability. Roughness rapidly increased from ∼0.2 nm to 1.6 nm, and contact angle reduced from ∼90° to 24°, both stabilizing after 25–30 s of exposure. A semi-empirical, physics-informed framework was calibrated to these data, coupling surface chemistry via the Owens–Wendt decomposition with topography via the Wenzel roughness factor, and evaluated using out-of-sample (cross-validated) tests, while static contact angle assessments measured wettability. Numerical predictions matched experimental results closely (RMSE <5%, R 2 > 0.95). Incorporating material-specific parameters, the calibrated model supports plasma-treatment optimization and provides quantitative guidance for improving interfacial adhesion in thermoplastic composite manufacturing.

Atomic Force Microscopy↗
DOE OSTI2025

Compaction and Morphology of Lost Circulation Materials

Lost circulation material (LCM) selection is critical to effectively and efficiently treating wellbore fluid losses in geothermal drilling where costs of treatment can be as much as 30% of the total drilling cost. We conducted several uniaxial compaction experiments on 10 different materials and several material mixtures to identify critical mechanical parameters of each. Materials degraded at 200°C were also investigated to understand how elevated temperatures in geothermal wells would degrade their compaction behavior. Granular materials tended to have lower compressibility and higher compression resistance, while more elongated and softer materials had less mechanical stiffness. Mixing materials tended to moderate the mechanical behaviors while heating universally increased the compaction of materials. Microscopy showed that particle strength tended to correlate positively with roundness and circularity and negatively with elongation of a material. Convexity of the degraded and undegraded materials showed heating may have increased the convexity or roughness of the individual particles. In conclusion, we concluded that granular materials are likely to provide the best seals in wells but that a mixture of size distribution, mechanical rigidity, and elongation is more likely to form a better seal for geothermal wells.

annular pressure drilling↗
DOE OSTI2020

Numerical Study of a Passive Wedge Absorber System for Momentum Selection of Muon Beams

The Muon g-2 experiment aims to measure the anomalous magnetic moment of the muon with higher precision than previous experiments. In order to do this muons are created from protons hitting the target and are then sent to the M4 and M5 lines to be injected into the storage ring. The storage ring only accepts muons with momentum within 0.2% of 3094 MeV/c. In order to decrease the number of lost muons a wedge was placed in the M5 beam line to utilize the properties of ionization cooling to create a more uniform momentum spread. Previous simulations predicted a much larger gain of storable muons than the experimental results showed. In order to determine the cause of this discrepancy, simulations were run using a GEANT4 based code to track muons through the M4 and M5 lines, the inflector, and the storage ring while adjusting the orientation, material, geometrical parameters and studying the performance of this wedge for a wide range of incoming muon energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Theoretical and calculable dependent variables and their covariance in nuclear data libraries [Slides]

This presentation begins by defining observables, including theoretical observable, calculable observable, and measured observable. It also provides definitions and examples of experimental effects. Additionally, uncertainty in evaluated libraries and a metric to probe evaluated uncertainty is presented. In conclusion, being related to theoretical quantities such as resonance parameters, the uncertainty in ENDF libraries (e.g., ENDF/B-VIII.0) can be overestimated because it is usually evaluated under the guidance of experimental uncertainty: lim Δσexp.corr.→0 Δσ = Δσ theoretical model . The presentation states that a clear distinction of the uncertainty between nuclear theoretical models and experimental corrections should be revisited and this is important since (e.g., transport) simulations need theoretical quantities convoluted with specific operational parameters and material configurations. It also states that strong coupling between uncertainty quantification methodologies and optimization procedures exists, and it is necessary to develop methodologies to obtain uncertainty on theoretical models from physical and mathematical constraints.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

X-ray Irradiance Distribution for an Interferometer with a Curved Biprism Array

The development of interferometry-based X-ray phase contrast imaging systems that provide highly resolved X-rays with spatially-modulated intensity is enabling the full potential of X-ray optics to image phase, attenuation, and small angle scatter properties of soft tissue. In this work we present analytical formulations of a new hardware concept for X-ray phase contrast imaging wherein the phase grating is replaced with an array of Fresnel biprisms. We derive expressions for the irradiance distribution pattern of a biprism interferometer composed of a curved biprism array with multiple biprisms and multiple point sources. These expressions are used to plot fringe patterns for X-ray design parameters, including 1) size, number, and period of X-ray point sources; 2) biprism parameters of material composition, angle, number, and period; and 3) biprism array to X-ray source and detector distances. Analytical results show that the biprism interferometer provides a longitudinally-nonperiodic pattern of spatially modulated intensity different from the Talbot longitudinally-periodic pattern common in grating interferometry. The curvature of the biprism array brings a sharper longitudinal fringe pattern. Experiments are being performed to verify the analytical calculations for a biprism plastic material of SU-8 using a synchrotron source. X-ray biprism material has widely varied indexes of refraction relative to wavelength and thus the separation of the virtual sources and resulting interference fringe period also varies with X-ray wavelength. Our aim is to develop biprism interferometry imaging systems with excellent polychromatic performance that produce high-contrast fringes with spatially incoherent X-ray illumination. Biprism interferometry will potentially provide higher fringe visibility with better image quality to that of diffraction grating interferometry.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2021

Localizing Clinical Patterns of Blast Traumatic Brain Injury Through Computational Modeling and Simulation

Blast traumatic brain injury is ubiquitous in modern military conflict with significant morbidity and mortality. Yet the mechanism by which blast overpressure waves cause specific intracranial injury in humans remains unclear. Reviewing of both the clinical experience of neurointensivists and neurosurgeons who treated service members exposed to blast have revealed a pattern of injury to cerebral blood vessels, manifested as subarachnoid hemorrhage, pseudoaneurysm, and early diffuse cerebral edema. Additionally, a seminal neuropathologic case series of victims of blast traumatic brain injury (TBI) showed unique astroglial scarring patterns at the following tissue interfaces: subpial glial plate, perivascular, periventricular, and cerebral gray-white interface. The uniting feature of both the clinical and neuropathologic findings in blast TBI is the co-location of injury to material interfaces, be it solid-fluid or solid-solid interface. This motivates the hypothesis that blast TBI is an injury at the intracranial mechanical interfaces. In order to investigate the intracranial interface dynamics, we performed a novel set of computational simulations using a model human head simplified but containing models of gyri, sulci, cerebrospinal fluid (CSF), ventricles, and vasculature with high spatial resolution of the mechanical interfaces. Simulations were performed within a hybrid Eulerian—Lagrangian simulation suite (CTH coupled via Zapotec to Sierra Mechanics). Because of the large computational meshes, simulations required high performance computing resources. Twenty simulations were performed across multiple exposure scenarios—overpressures of 150, 250, and 500 kPa with 1 ms overpressure durations—for multiple blast exposures (front blast, side blast, and wall blast) across large variations in material model parameters (brain shear properties, skull elastic moduli). All simulations predict fluid cavitation within CSF (where intracerebral vasculature reside) with cavitation occurring deep and diffusely into cerebral sulci. These cavitation events are adjacent to high interface strain rates at the subpial glial plate. Larger overpressure simulations (250 and 500kPa) demonstrated intraventricular cavitation—also associated with adjacent high periventricular strain rates. Additionally, models of embedded intraparenchymal vascular structures—with diameters as small as 0.6 mm—predicted intravascular cavitation with adjacent high perivascular strain rates. The co-location of local maxima of strain rates near several of the regions that appear to be preferentially damaged in blast TBI (vascular structures, subpial glial plate, perivascular regions, and periventricular regions) suggest that intracranial interface dynamics may be important in understanding how blast overpressures leads to intracranial injury.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1967

Impact cratering in granular materials.

Projectile impact cratering in granular materials, noting parameters determining crater size and volume and experimental agreement with hydrodynamic cratering theory

Cook, M. A.↗
NASA NTRS1969

Wall-thickness changes predicted in hollow-drawn tubing

Hollow-tube drawing or tube sinking theory is based on the concept of continuous distribution of dislocations. Material composition, parameter influence, and die-angle are determining factors in derivation of the theoretical model.

Flinn, J. E.↗
NASA NTRS1971

Nonmetallic-materials development for spacecraft applications

The development, characteristics, and applications of nonmetallic materials used for spacecraft structures are discussed. The effects of extremes in environment as a factor in material selection are considered. Material design parameters are especially complex because of the requirements imposed for additional fire safety and resistance to the free space and lunar surface environment.

Dawn, F. S.↗
NASA NTRS1973

Geometric interpretation of the ratio of overall diameter to rim crest diameter for lunar and terrestrial craters.

An empirical linear relationship has been established by Pike (1967) between the overall diameter and the rim crest diameter for rimmed, flat-floored as well as bowl-shaped, lunar and terrestrial craters formed by impact and explosion. A similar relationship for experimentally formed fluidization craters has been established by Siegal (1971). This relationship is examined in terms of the geometry of the crater and the slope angles of loose materials. The parameter varies from 1.40 to 1.65 and is found to be dependent on mean interior flat floor radius, exterior and interior rim slope angles, angle of aperture of the crater cone, and the volume fraction of crater void accounted for in the rim. The range of the observed parameter can be understood in terms of simple crater geometry by realistic values of the five parameters.

Siegal, B. S.↗