Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiple scattering effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

IMAGING AN EVENT HORIZON: MITIGATION OF SOURCE VARIABILITY OF SAGITTARIUS A*

The black hole in the center of the Galaxy, associated with the compact source Sagittarius A* (Sgr A*), is predicted to cast a shadow upon the emission of the surrounding plasma flow, which encodes the influence of general relativity (GR) in the strong-field regime. The Event Horizon Telescope (EHT) is a Very Long Baseline Interferometry (VLBI) network with a goal of imaging nearby supermassive black holes (in particular Sgr A* and M87) with angular resolution sufficient to observe strong gravity effects near the event horizon. General relativistic magnetohydrodynamic (GRMHD) simulations show that radio emission from Sgr A* exhibits variability on timescales of minutes, much shorter than the duration of a typical VLBI imaging experiment, which usually takes several hours. A changing source structure during the observations, however, violates one of the basic assumptions needed for aperture synthesis in radio interferometry imaging to work. By simulating realistic EHT observations of a model movie of Sgr A*, we demonstrate that an image of the average quiescent emission, featuring the characteristic black hole shadow and photon ring predicted by GR, can nonetheless be obtained by observing over multiple days and subsequent processing of the visibilities (scaling, averaging, and smoothing) before imaging. Moreover, it is shown that this procedure can be combined with an existing method to mitigate the effects of interstellar scattering. Taken together, these techniques allow the black hole shadow in the Galactic center to be recovered on the reconstructed image.

79 ASTRONOMY AND ASTROPHYSICS↗

Invar Effect and non-collinear magnetism in FeCu alloys

The Invar effect has been observed in many Fe rich alloys, most famously Ni Invar. Generally the Invar behavior is associated with the strong coupling between the lattice and magnetic degrees of freedom, and therefore depends on the magnetic ordering in these alloys. Recent experimental works observed an Invar effect in fcc-FeCu solid solutions. In the present paper the magnetic states of fcc-FeCu solid solutions for various concentrations is investigated. The first principles calculations employ the locally selfconsistent multiple scattering (LSMS) real space method for solving the LDA Kohn-Sham equation to investigate the non collinear ordering of magnetic moments. The magnetic order for the low iron concentration is fount to be non-collinear, spin glass like, and the ferromagnetic order is not stable, whereas for the iron rich alloys for the ground state equilibrium lattice constants a magnetic order with parallel aligned Fe moments is stable. In this configuration the induced moments at the Cu sites order nontrivially on a cone with an opening of approximately 40 degrees around the Fe moment direction.

36 MATERIALS SCIENCE↗

Ultracold Three-Body Collisions near Overlapping Feshbach Resonances

We present a comprehensive collection of ultracold three-body collisions properties near overlapping Feshbach resonances. Our results incorporate variations of all scattering lengths and demonstrate novel collisional behavior, such as atom-molecule interference effects. Taking advantage of the unique ways in which these collisions reflect Efimov physics, new pathways to control atomic and molecular losses open up. Further, we show that overlapping resonances can greatly improve the chances of observing multiple Efimov features in an ultracold quantum gas for nearly any system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quark energy loss in semi-inclusive deep inelastic scattering of leptons on nuclei

Semi-inclusive deep inelastic scattering on nuclear targets is an ideal tool to study the energy loss effect of an outgoing quark in a nuclear medium. By means of the short hadron formation time, the experimental data with quark hadronization occurring outside the nucleus are picked out. A leading-order analysis is performed for the hadron multiplicity ratios as a function of the energy fraction on helium, neon, and copper nuclei relative to deuteron for the various identified hadrons. It is shown that the nuclear effects on parton distribution functions can be neglected. It is found that the theoretical results considering the nuclear modification of fragmentation functions due to quark energy loss are in good agreement with the experimental data. Whether the quark energy loss is linear or quadratic with the path length is not determined. The obtained energy loss per unit length is 0.38+-0.03 GeV/fm for an outgoing quark by the global fit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Model dependence of the {sup 2}H electric dipole moment

Background: Direct measurement of the electric dipole moment (EDM) of the neutron is in the future; measurement of a nuclear EDM may well come first. The deuteron is one nucleus for which exact model calculations are feasible. Purpose: We explore the model dependence of deuteron EDM calculations. Methods: Using a separable potential formulation of the Hamiltonian, we examine the sensitivity of the deuteron EDM to variation in the nucleon-nucleon interaction. We write the EDM as the sum of two terms, the first depending on the target wave function with plane-wave intermediate states, and the second depending on intermediate multiple scattering in the {sup 3}P{sub 1} channel, the latter being sensitive to the off-shell behavior of the {sup 3}P{sub 1} amplitude. Results: We compare the full calculation with the plane-wave approximation result, examine the tensor force contribution to the model results, and explore the effect of short-range repulsion found in realistic, contemporary potential models of the deuteron. Conclusions: Because one-pion exchange dominates the EDM calculation, separable potential model calculations will provide an adequate description of the {sup 2}H EDM until such time as a measurement better than 10% is obtained.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Acoustic Phased Array Quantification of Quiet Technology Demonstrator 3 Advanced Inlet Liner Noise Component

Acoustic phased array flyover noise measurements were acquired as part of the Boeing 737 MAX-7 NASA Advanced Inlet Liner segment of the Quiet Technology Demonstrator 3 (QTD3) flight test program. This paper reports on the processes used for separating and quantifying the engine inlet, exhaust and airframe noise source components and provides sample phased array-based comparisons of the component noise source levels associated with the inlet liner treatment configurations. Full scale flyover noise testing of NASA advanced inlet liners was conducted as part of the Quiet Technology Demonstrator 3 flight test program in July and August of 2018. Details on the inlet designs and testing are provided in the companion paper of Reference 1. The present paper provides supplemental details relating to the acoustic phased array portion of the analyses provided in Ref. 1. In brief, the test article was a Boeing 737MAX-7 aircraft with a modified right hand (starboard side) engine inlet, which consisted of either a production inlet liner, a NASA designed inlet liner or a simulated hard wall configuration (accomplished by applying speed tape over the inlet acoustic treatment areas). In all three configurations, the engine forward fan case acoustic panel was replaced with a unperforated (hardwall) panel. No other modifications to any other acoustic treatment areas were made. The left hand (port side) engine was a production engine and was flown at idle thrust for all measurements in order to isolate the effects of the inlet liners to the right hand engine. As described in Ref. 1, the NASA inlet treatment consists of laterally cut slots (cut perpendicular to the flow direction) which are designed to reduce excrescence drag while maintaining or exceeding the liner acoustic noise reduction capabilities. The NASA inlet liner consists of a Multi-Degree of Freedom (MDOF) design with two breathable septum layers inserted into each honeycomb cell [1]. The aircraft noise measurements were acquired for both takeoff (flaps 1 setting, gear up) and approach (flaps 30 gear up and gear down) configurations. The inlet and flight test configurations are summarized in Table 1. Table 1: Inlet Treatment and Flight Configurations Inlet Forward Fan Case Aircraft Production Hardwall Flaps 1, gear up; flaps 30 gear up; flaps 30 gear down NASA Hardwall Flaps 1, gear up; flaps 30 gear up; flaps 30 gear down Hardwall Hardwall Flaps 1, gear up; flaps 30 gear up; flaps 30 gear down III.Test Description and Hardware The flight testing was conducted at the Grant County airport in Moses Lake, WA, between 27 July and 6 August 2018. The noise measurement instrumentation included 8 flush dish microphones arranged in a noise certification configuration as well as an 840 microphone phased array. The flush dish microphones were used to quantify the levels and differences in levels between the various inlet treatments. The phased array was used to separate and quantify the narrowband (tonal) and broadband noise component levels from the engine inlet/exhaust and from the airframe. Phased array extraction of the broadband component was critical to this study because it allowed for the separation of the inlet component from the total airplane level noise even when it was significantly below the total level. Figure 1 provides an overview of the phased array microphone layout as well as a detailed image of an individual phased array microphone mounted in a plate holder (the microphone sensor is the dot in the center of the plate). The ground plane ensemble array microphones (referred to as “ensemble array” in this paper) were mounted in plates with “flower petal” edges designed to minimize edge scattering effects. Fig. 1 Flyover test microphone layout. The phased array configuration was the result of a progressive development of concepts originally implemented in Ref. 2 and refined over the following years, consisting namely of multiple multi-arm logarithmic spiral subarrays designed to cover overlapping frequency ranges and optimized for various aircraft emission angles. For the present case, the signals from all 840 microphones were acquired on a single system. The 840 microphones were parsed into 11 primary subarray sets spanning from smallest to largest aperture size and labeled accordingly as “a, b, …, k”, where “a” corresponds to the smallest fielded subarray and “k” corresponds to the largest aperture subarray. The apertures ranged from approximately 10 ft to 427 ft in size (in the flight direction) with the subarrays consisting of between 215 and 312 microphones. Figure 2 shows three such subarrays, k, h and a. As done in Ref. 2, microphones were shared between subarrays in order to reduce total channel count. Fig. 2 Sample subarray sizes (20° from overhead – refer to Figure 3a discussion). In addition to the above, each of the 11 primary subarray sets consisted of four subarrays optimized to provide near equivalent array spatial resolution in both the flight and lateral directions within 30 degrees of overhead (i.e., airplane directly above the center of the array), namely, at angles  of 0, ±10, ±20 and ±30 degrees relative to overhead where angle  is defined as shown in Figure 3a. This allowed for optimized aircraft noise measurements from 60 to 120 degree emission angle.6 An example of this pletharray design is shown in Figure 3b for the k subarray. When the aircraft is at overhead, the microphones indicated by the blue markers are used for beamforming. When the aircraft is at angles ±10 degrees from overhead, both the blue and red colored microphones are used, and so on for the ±20 and ±30 degree aircraft locations. See Ref. 3 for extensive details on pletharray design for aeroacoustic phased array testing. 6 In the discussions that follow, emission angle values are used. These are the angles at the time sound is emitted relative to the engine axis and are calculated based on flight path angle, body aircraft body angle with respect to the relative wind direction, and engine axis angle relative to aircraft body angle.

Brusniak, Leon↗

Two particle correlations: Saturation and issues with universality

We study the universality issue of the transverse momentum dependent parton distributions at small-x, by comparing the initial/final state interaction effects in di-jet correlation in pA collisions with those in deep inelastic lepton-nucleus scattering. We demonstrate the non-universality by performing an explicit calculation in a particular model where the multiple gauge boson exchange contributions are summed up to all orders. In addition, we generalize the model calculation to the CGC formalism, and find the non-universality for quark distributions in CGC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparing generator predictions of transverse kinematic imbalance in neutrino-argon scattering

The largest uncertainties in estimating neutrino-nucleus interaction cross sections lie in the incomplete understanding of nuclear effects. A powerful tool to study nuclear effects is Transverse Kinematic Imbalance. This paper presents the first detailed comparison of the predictions of multiple event generators for distributions associated with Transverse Kinematic Imbalance for neutrino interactions on argon. Predictions for muon neutrinos interacting with an argon target are obtained using four standard neutrino event generation tools (GENIE, NuWro, GiBUU and NEUT). Example opportunities for discrimination between nuclear models leveraging future measurements are highlighted. The predictions shown in this paper are motivated by studying muon neutrinos from the Fermilab Booster Neutrino Beam interacting at the location of the MicroBooNE liquid argon time projection chamber, but the methods directly apply to other accelerator-based liquid argon neutrino experiments such as SBND, ICARUS and DUNE.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Theoretical Study of the Magnetic Structure of Bulk Iron with Radiation Defects

A fundamental understanding of the radiation damage effects in solids is of great importance in assisting the development of improved materials with ultra-high strength, toughness, and radiation resistance for nuclear energy applications. In this presentation, we show our recent theoretical investigation on the magnetic structure evolution of bulk iron in the region surrounding the radiation defects. We applied the locally self-consistent multiple scattering method (LSMS), a linear scaling ab-initio method based on density functional theory with local spin density approximation, to the study of the magnetic structure in a low energy cascade in a 10,000-atom sample for a series of time steps for the evolution of the defects. The primary damage state and the evolution of all defects in the sample were simulated using molecular dynamics with empirical, embedded-atom inter-atomic potentials. We also discuss the importance of thermal effect on the magnetic structure evolution.

Wang, Yang↗

Nuclear dependence of azimuthal asymmetry in semi-inclusive deep inelastic scattering

Within the framework of a generalized factorization, semi-inclusive deeply inelastic scattering (SIDIS) cross sections can be expressed as a series of products of collinear hard parts and transverse-momentum-dependent (TMD) parton distributions and correlations. The azimuthal asymmetry <cosphi> of unpolarized SIDIS in the small transverse-momentum region will depend on both twist-2 and -3 TMD quark distributions in target nucleons or nuclei. Nuclear broadening of these twist-2 and -3 quark distributions due to final-state multiple scattering in nuclei is investigated and the nuclear dependence of the azimuthal asymmetry <cosphi> is studied. It is shown that the azimuthal asymmetry is suppressed by multiple parton scattering and the transverse-momentum dependence of the suppression depends on the relative shape of the twist-2 and -3 quark distributions in the nucleon. A Gaussian ansatz for TMD twist-2 and -3 quark distributions in nucleon is used to demonstrate the nuclear dependence of the azimuthal asymmetry and to estimate the smearing effect due to fragmentation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Precise implications for real-space pair distribution function modeling of effects intrinsic to modern time-of-flight neutron diffractometers

Total scattering and pair distribution function (PDF) methods allow for detailed study of local atomic order and disorder, including materials for which Rietveld refinements are not traditionally possible (amorphous materials, liquids, glasses and nanoparticles). With the advent of modern neutron time-of-flight (TOF) instrumentation, total scattering studies are capable of producing PDFs with ranges upwards of 100–200 Å, covering the correlation length scales of interest for many materials under study. Despite this, the refinement and subsequent analysis of data are often limited by confounding factors that are not rigorously accounted for in conventional analysis programs. Furthermore, while many of these artifacts are known and recognized by experts in the field, their effects and any associated mitigation strategies largely exist as passed-down `tribal' knowledge in the community, and have not been concisely demonstrated and compared in a unified presentation. This article aims to explicitly demonstrate, through reviews of previous literature, simulated analysis and real-world case studies, the effects of resolution, binning, bounds, peak shape, peak asymmetry, inconsistent conversion of TOF to d spacing and merging of multiple banks in neutron TOF data as they directly relate to real-space PDF analysis. Suggestions for best practice in analysis of data from modern neutron TOF total scattering instruments when using conventional analysis programs are made, as well as recommendations for improved analysis methods and future instrument design.

36 MATERIALS SCIENCE↗

MULTIPLE-PLANET SCATTERING AND THE ORIGIN OF HOT JUPITERS

Doppler and transit observations of exoplanets show a pile-up of Jupiter-size planets in orbits with a 3 day period. A fraction of these hot Jupiters have retrograde orbits with respect to the parent star's rotation, as evidenced by the measurements of the Rossiter-McLaughlin effect. To explain these observations we performed a series of numerical integrations of planet scattering followed by the tidal circularization and migration of planets that evolved into highly eccentric orbits. We considered planetary systems having three and four planets initially placed in successive mean-motion resonances, although the angles were taken randomly to ensure orbital instability in short timescales. The simulations included the tidal and relativistic effects, and precession due to stellar oblateness. Our results show the formation of two distinct populations of hot Jupiters. The inner population (Population I) is characterized by semimajor axis a < 0.03 AU and mainly formed in the systems where no planetary ejections occurred. Our follow-up integrations showed that this population was transient, with most planets falling inside the Roche radius of the star in <1 Gyr. The outer population of hot Jupiters (Population II) formed in systems where at least one planet was ejected into interstellar space. This population survives the effects of tides over >1 Gyr and fits nicely the observed 3 day pile-up. A comparison between our three-planet and four-planet runs shows that the formation of hot Jupiters is more likely in systems with more initial planets. Due to the large-scale chaoticity that dominates the evolution, high eccentricities and/or high inclinations are generated mainly by close encounters between the planets and not by secular perturbations (Kozai or otherwise). The relative proportion of retrograde planets seems of be dependent on the stellar age. Both the distribution of almost aligned systems and the simulated 3 day pile-up also fit observations better in our four-planet simulations. This may suggest that the planetary systems with observed hot Jupiters were originally rich in the number of planets, some of which were ejected. In a broad perspective, our work therefore hints on an unexpected link between the hot Jupiters and recently discovered free floating planets.

79 ASTRONOMY AND ASTROPHYSICS↗

Invar effect and noncollinear magnetism in FeCu alloys

The Invar effect has been observed in many Fe rich alloys, most famously Ni Invar. Generally the Invar behavior is associated with the strong coupling between the lattice and magnetic degrees of freedom, and therefore depends on the magnetic ordering in these alloys. Recent experimental works observed an Invar effect in fcc-FeCu solid solutions. In the present paper the magnetic states of fcc-FeCu solid solutions for various concentrations are investigated. The first principles calculations employ the locally self-consistent multiple scattering real space method for solving the local-density approximation Kohn–Sham equation to investigate the noncollinear ordering of magnetic moments. Here, the magnetic order for the low iron concentration is found to be noncollinear, spin glasslike, and the ferromagnetic order is not stable, whereas for the iron rich alloys for the ground state equilibrium lattice constants a magnetic order with parallel aligned Fe moments is stable. In this configuration the induced moments at the Cu sites order nontrivially on a cone with an opening of approximately 40° around the Fe moment direction.

36 MATERIALS SCIENCE↗

Elastic scattering of deuterons by carbon

Deuteron-carbon elastic scattering is studied within the framework of the Glauber approximation. The full Glauber multiple scattering series is evaluated with simplified nuclear wave functions. An approximation in which deuteron-nucleus scattering is expressed in terms of nucleon-nucleus scattering amplitudes is shown to be accurate for small momentum transfers. The effects of the Coulomb field and the deuteron D state are investigated. The impressive fit to the 650 MeV d-(C-12) elastic scattering data, obtained in a recent calculation, is shown to be due to additional approximations made in that analysis.

Varma, G. K.↗

Decimeter-Wavelength Polarimetric Radar Imaging of the Icy Moons of Jupiter

Imaging radars with wavelengths in the range of 10 cm to 1 m can deeply penetrate the surface of an icy body, revealing details of the geomorphology, local structure, and electrical properties of the upper layers. Radar studies of icy surfaces on Earth have used the polarization state of backscatter echoes at multiple frequencies to characterize the surface and subsurface properties of glaciers, showing relatively smooth surfaces on the scale of radar wave-lengths, and subsurface scattering from volume scatterers consistent with ice pipes and lenses. These volume scattering effects are evident in enhanced polarization ratios over a limited range of backscatter incidence angles. The Galilean satellites exhibit similarly enhanced polarization ratios and volumetric scattering effects, but the observations are limited in angular resolution, leading to ambiguity in interpreting the scattering mechanisms and their structural implications.

Rosen, P. A.↗

Revised and extended benchmark results for Rayleigh scattering of sunlight in spherical atmospheres

While most of traditional Earth-atmosphere satellite remote sensing relies on radiative transfer in the plane parallel geometry, effects of sphericity are important at high sun and view zenith angles. Broad understanding of these effects is limited and, contrary to the plane-parallel case, finding accurate numerical results to test spherical RT codes is not easy. This paper aims to partially fill in this gap. Using the full-spherical RT code MYSTIC (Monte Carlo), and the plane-parallel RT code VLIDORT (discrete ordinates) corrected for atmospheric sphericity in the single and multiple scattering, we reproduced with better accuracy and extended the benchmark results by Adams & Kattawar [1978].

spherical atmospheres↗

Atmospheric aerosols: Their Optical Properties and Effects (supplement)

A digest of technical papers is presented. Topics include aerosol size distribution from spectral attenuation with scattering measurements; comparison of extinction and backscattering coefficients for measured and analytic stratospheric aerosol size distributions; using hybrid methods to solve problems in radiative transfer and in multiple scattering; blue moon phenomena; absorption refractive index of aerosols in the Denver pollution cloud; a two dimensional stratospheric model of the dispersion of aerosols from the Fuego volcanic eruption; the variation of the aerosol volume to light scattering coefficient; spectrophone in situ measurements of the absorption of visible light by aerosols; a reassessment of the Krakatoa volcanic turbidity, and multiple scattering in the sky radiance.

Source record↗