Search NASA⌕ Search

SEARCH · Search NASA

Results for “numerical software”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

A floating-point/multiple-precision processor for airborne applications

A compact input output (I/O) numerical processor capable of performing floating-point, multiple precision and other arithmetic functions at execution times which are at least 100 times faster than comparable software emulation is described. The I/O device is a microcomputer system containing a 16 bit microprocessor, a numerical coprocessor with eight 80 bit registers running at a 5 MHz clock rate, 18K random access memory (RAM) and 16K electrically programmable read only memory (EPROM). The processor acts as an intelligent slave to the host computer and can be programmed in high order languages such as FORTRAN and PL/M-86.

Yee, R.↗

Visualization software for a global three-dimensional upper atmosphere model

A software environment has been developed to assist in analysis and visualization of numerical outputs from NCAR's thermospheric general circulation models. The codes produce vector graphics, raster imagery, and time dependent animation of model results, with provision for comparison with empirical models and relevant data from satellite and ground based instruments. Separate programs are executed on the NCAR CRAY YMP8/864 and HAO divisional Sun workstations, providing both large volume highspeed batch and custom interactive computing environments. The visualization system assembles a suite of existing software packages including NCAR Graphics, IDL, netCDF, and the Xt intrinsics library with the Athena widget set.

Foster, Benjamin T.↗

Evaluating Heuristics for Planning Effective and Efficient Inspections

A significant body of knowledge concerning software inspection practice indicates that the value of inspections varies widely both within and across organizations. Inspection effectiveness and efficiency can be measured in numerous ways, and may be affected by a variety of factors such as Inspection planning, the type of software, the developing organization, and many others. In the early 1990's, NASA formulated heuristics for inspection planning based on best practices and early NASA inspection data. Over the intervening years, the body of data from NASA inspections has grown. This paper describes a multi-faceted exploratory analysis performed on this · data to elicit lessons learned in general about conducting inspections and to recommend improvements to the existing heuristics. The contributions of our results include support for modifying some of the original inspection heuristics (e.g. Increasing the recommended page rate), evidence that Inspection planners must choose between efficiency and effectiveness, as a good tradeoff between them may not exist, and Identification of small subsets of inspections for which new inspection heuristics are needed. Most Importantly, this work illustrates the value of collecting rich data on software Inspections, and using it to gain insight into, and Improve, inspection practice.

Shull, Forrest J.↗

Managing People's Data

Just imagine a mass storage system that consists of a machine with 2 CPUs, 1 Gigabyte (GB) of memory, 400 GB of disk space, 16800 cartridge tapes in the automated tape silos, 88,000 tapes located in the vault, and the software to manage the system. This system is designed to be a data repository; it will always have disk space to store all the incoming data. Currently 9.14 GB of new data per day enters the system with this rate doubling each year. To assure there is always disk space available for new data, the system. has to move data reside from the expensive disk to a much less expensive medium such as the 3480 cartridge tapes. Once the data is archived to tape, it should be able to move back to disk when someone wants to access it and the data movement should be transparent to the user. Now imagine all the tasks that a system administrator must perform to keep this system running 24 hour a day, 7 days a week. Since the filesystem maintains the illusion of unlimited disk space, data that comes to the system must get moved to tapes in an efficient manner. This paper will describe the mass storage system running at the Numerical Aerodynamic Simulation (NAS) at NASA Ames Research Center in both software and hardware aspects, then it will describe all of the tasks the system administrator has to perform on this system.

Le, Diana↗

The SCEC Unified Community Velocity Model Software Framework

Crustal seismic-velocity models and datasets play a key role in regional 3D numerical earthquake ground-motion simulation, full waveform tomography, and modern physics-based probabilistic earthquake-hazard analysis, as well as in other related fields, including geophysics and earthquake engineering. Most of these models and datasets, often collectively identified as Community Velocity Models (CVMs), synthesize information from multiple sources and are delivered to users in variable formats, including computer applications that allow for interactive querying of material properties, namely P- and S-wave velocities and density ρ. Computational users often require massive and repetitive access to velocity models and datasets, and such access is often unpractical and difficult due to a lack of standardized methods and procedures. To overcome these issues and to facilitate access by the community to these models, the Southern California Earthquake Center developed the Unified CVM (UCVM) software framework, an open-source collection of tools that enables users to access one or more seismic-velocity models, while providing a standard query interface. Here, we describe the research challenges that motivated the development of UCVM, its software design, development approach, and basic capabilities, as well as a few examples of seismic-modeling applications that use UCVM.

Geochemistry & Geophysics↗

Yet Another NLA Library: T-LAPACK

In recent years, Randomized numerical linear algebra (RandNLA) proved to be more than a theoretical novelty: projects like RandLAPACK demonstrate its practical value across architectures, and projects like RandBLAS build trust in randomization as a tool for high-performance NLA. This BoF considers two main questions. First, what are the pressing issues in software standards and implementation that need to be resolved for RandNLA to become a core component of HPC? Second, how can we mobilize a community effort to make progress on these issues? The BoF will engage the audience to discuss the idea of growing the role of RandNLA in high-performance computing and what it would take to scale from niche prototypes to robust, production-quality software libraries.

97 MATHEMATICS AND COMPUTING↗

Multi-Entity Simulation with CoSim Toolbox

Co-simulation is an analysis technique for linking multiple software models during runtime by facilitating data exchange and simulation time synchronization. There are numerous challenges when constructing an effective co-simulation including simulation tool installation, data management, and writing new models in a manner compatible with the co-simulation framework of choice. CoSim Toolbox is an integration of multiple pieces of software designed to make assembling such a co-simulation in HELICS easier. This report summarizes the existing capabilities of CoSim Toolbox and outlines future development plans.

97 MATHEMATICS AND COMPUTING↗

Modeling of wave processes in blocky media with porous and fluid-saturated interlayers

The wave processes in blocky media are analyzed by applying different mathematical models, wherein the elastic blocks interact with each other via pliant interlayers with the complex mechanical properties. Four versions of constitutive equations are considered. In the first version, an elastic interaction between the blocks is simulated within the framework of linear elasticity theory, and the model of elastic–plastic interlayers is constructed to take into account the appearance of irreversible deformation of interlayers at short time intervals. In the second one, the effects of viscoelastic shear in the interblock interlayers are taken into the consideration using the Poynting–Thomson rheological scheme. In the third option, the model of an elastic porous material is used in the interlayers, where the pores collapse if an abrupt compressive stress is applied. In the fourth case, the model of a fluid-saturated material with open pores is examined based on Biot's equations. The collapse of pores is modeled by the generalized rheological approach, wherein the mechanical properties of a material are simulated using four rheological elements. Three of them are the traditional elastic, viscous and plastic elements, the fourth element is the so-called rigid contact, which is used to describe the behavior of materials with the different resistance to tension and compression. It was shown that the thermodynamically consistent model is provided, which means that the energy balance equation is fulfilled for an entire blocky structure, where the kinetic and potential energy of the system is the sum of the kinetic and potential energies of the blocks and interlayers. Under numerical implementation of the interlayers models, the dissipationless finite difference Ivanov's method was used. The splitting method by spatial variables in the combination with the Godunov gap decay scheme was applied in the blocks. As a result, robust and stable computational algorithms are built and tested. Using MPI technology, the parallel software was designed for the modeling of wave processes in 2D setting. The numerical results are presented, discussed and future studies are outlined. - Highlights: • We model the propagation of waves in a blocky medium with compliant interlayers. • Models of porous and fluid saturated interlayers are proposed using Biot's approach. • A parallel computational algorithm is developed for supercomputers of cluster type. • Problems of instant rotation of central and boundary blocks are solved numerically. • Wave motions are compared in the cases of elastic and fluid-saturated interlayers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

1:52 Scale Testing of the First US Commercial Scale Floating Wind Turbine, VolturnUS: Testing Overview and the Evolution of Scale Model Testing Methods

Over the past 6 years, the University of Maine (UMaine) has been an active contributor in research and scale-model testing of floating offshore wind turbines (FOWTs). This paper serves to share the evolution of UMaine’s scale-model testing pedigree by exploring the various test campaigns at a high level, culminating with the design validation of the VolturnUS floating platform. These model test campaigns have each provided key insights into the behavior of FOWT platforms as well as improving the ability to perform model tests of FOWTs. In 2011, the UMaine-led DeepCwind Consortium carried out 1/50-scale model tests of a generic tension leg platform (TLP), a semi-submersible (semi), and a spar-buoy (spar) floating platform at the Maritime Research Institute Netherlands (MARIN) test facility. The designs were Froude-scaled and supported a scaled version of the 5-MW National Renewable Energy Laboratory (NREL) offshore research turbine. Data from these tests has been used extensively for numerical simulation validation efforts using NREL’s computer-aided engineering software FAST and laid the foundation for UMaine’s design efforts on VolturnUS. In 2013, UMaine conducted another test campaign at MARIN using the original semi-submersible from 2011 with an improved turbine as well as a 1:50-scale model of the VolturnUS concrete semi-submersible design. The improved DeepCwind semi-submersible data is currently being utilized in the validation of a large number of other analysis codes as part of the International Energy Agency’s OC5 project. In 2015, UMaine opened its own Wind/Wave test facility, the Alfond Wind/Wave Ocean Engineering Laboratory (W2). Utilizing this new facility, UMaine tested the 1:50-scale model DeepCwind semi-submersible, repeating the tests from MARIN, to validate the experimental equipment and procedures as well as demonstrate the capability of the W2. In 2016 UMaine carried out testing of a 1:52-scale model of the 100% design of the VolturnUS with a 6-MW topside as a final design validation to support the US Department of Energy-supported, full-scale Aqua Ventus demonstration project scheduled to be connected to the grid in 2019. A newly designed 6-MW scale model turbine was used in this test and the performance-matched turbine design methodology is described. Selected results from the test campaign and preliminary numerical comparisons are discussed as well as key lessons learned from the model test campaigns are presented.

17 WIND ENERGY↗

A high-order numerical algorithm for DNS of low-Mach-number reactive flows with detailed chemistry and quasi-spectral accuracy

A novel and efficient algorithm is presented in this paper to deal with DNS of turbulent reacting flows under the low-Mach-number assumption, with detailed chemistry and a quasi-spectral accuracy. The temporal integration of the equations relies on an operating-split strategy, where chemical reactions are solved implicitly with a stiff solver and the convection-diffusion operators are solved with a Runge-Kutta-Chebyshev method. The spatial discretisation is performed with high-order compact schemes, and a FFT based constant-coefficient spectral solver is employed to solve a variable-coefficient Poisson equation. The numerical implementation takes advantage of the 2DECOMP&FFT libraries developed by, which are based on a pencil decomposition method of the domain and are proven to be computationally very efficient. An enhanced pressure-correction method is proposed to speed up the achievement of machine precision accuracy. It is demonstrated that a second-order accuracy is reached in time, while the spatial accuracy ranges from fourth-order to sixth-order depending on the set of imposed boundary conditions. In conclusion, the software developed to implement the present algorithm is called HOLOMAC, and its numerical efficiency opens the way to deal with DNS of reacting flows to understand complex turbulent and chemical phenomena in flames.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visualizing biomolecular electrostatics in virtual reality with UnityMol-APBS

The APBS software was developed to solve the equations of continuum electrostatics for large biomolecular assemblages. APBS has enjoyed widespread adoption throughout the biomedical community and is used in numerous applications involving biomolecular structures. However, visualization of complex biomolecular electrostatic properties can be challenging for two-dimensional graphics systems. Therefore, advanced visualization and manipulation capabilities have been incorporated. In particular, APBS tools have been integrated with the UnityMolX virtual reality platform to provide an immersive experience for preparing biomolecular systems for calculations as well as visualizing and comparing calculated results.

electrostatics, molecular visualization, solvation↗

RAZORBACK - A Research Reactor Transient Analysis Code (Version 1.0 - Volume 2: Software Design and Development Report)

RAZORBACK is a research reactor transient analysis computer code designed to simulate the operation of a research reactor (such as Sandia National Laboratories' Annular Core Research Reactor (ACRR)). The code provides a coupled numerical solution of the point reactor kinetics equations, the energy conservation equation for fuel element heat transfer, the equation of motion for fuel element thermal expansion, and the mass, momentum, and energy conservation equations for the water cooling of the fuel elements. This Software Design and Development Report describes how the code is designed to implement the functional requirements established in the Software Requirements Specification document for RAZORBACK. The description presents the physical model equations used in the design, and how these equations are set up to be solved numerically. This report also provides an evaluation of how the software design meets each of the functional requirements.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Verification and Validation of Elastodynamic Simulation Software for Aerospace Research

Physics-based simulation of nondestructive evaluation (NDE) inspection can help to advance the inspectability and reliability of mechanical systems. However, NDE simulations applicable to non-idealized mechanical components often require large compute domains and long run times. This has prompted development of custom NDE simulation software tailored to high performance computing (HPC) hardware. Verification and validation (V&V) is an integral part of developing this software to ensure implementations are robust and applicable to inspection problems, producing tools and simulations suitable for computational NDE research. This presentation addresses factors common to V&V of several elastodynamic simulation codes applicable to ultrasonic NDE. Examples are drawn from in-house simulation software at NASA Langley Research Center, ranging from ensuring reliability in a 1D heterogeneous media wave equation solver to the V&V needs of 3D cluster-parallel elastodynamic software. Factors specific to a research environment are addressed, where individual simulation results can be as relevant as the software product itself. Distinct facets of V&V are discussed including testing to establish software reliability, employing systematic approaches for consistency with fundamental conservation laws, establishing the numerical stability of algorithms, and demonstrating concurrence with empirical data. This talk also addresses V&V practices for small groups of researchers. This includes establishing resources (e.g. time and personnel) for V&V during project planning to mitigate and control the risk of setbacks. Similarly, we identify ways for individual researchers to use V&V during simulation software development itself to both speed up the development process and reduce incurred technical debt.

NDE↗

Robust Iterative Method for Symmetric Quantum Signal Processing in All Parameter Regimes

Here, this paper addresses the problem of solving nonlinear systems in the context of symmetric quantum signal processing (QSP), a powerful technique for implementing matrix functions on quantum computers. Symmetric QSP focuses on representing target polynomials as products of matrices in SU(2) that possess symmetry properties. We present a novel Newton’s method tailored for efficiently solving the nonlinear system involved in determining the phase factors within the symmetric QSP framework. Our method demonstrates rapid and robust convergence in all parameter regimes, including the challenging scenario with ill-conditioned Jacobian matrices, using standard double precision arithmetic operations. For instance, solving symmetric QSP for a highly oscillatory target function α cos(1000x) (polynomial degree ≈ 1433) takes 6 iterations to converge to machine precision when α = 0.9, and the number of iterations only increases to 18 iterations when α = 1 – 10 -9 with a highly ill-conditioned Jacobian matrix. Leveraging the matrix product state structure of symmetric QSP, the computation of the Jacobian matrix incurs a computational cost comparable to a single function evaluation. Moreover, we introduce a reformulation of symmetric QSP using real-number arithmetics, further enhancing the method’s efficiency. Extensive numerical tests validate the effectiveness and robustness of our approach, which has been implemented in the QSPPACK software package.

97 MATHEMATICS AND COMPUTING↗

Impact of detector simulation in particle physics collider experiments

Through the last three decades, precise simulation of the interactions of particles with matter and modeling of detector geometries has proven to be of critical importance to the success of the international high-energy physics experimental programs. For example, the detailed detector modeling and accurate physics of the Geant4-based simulation software of the CMS and ATLAS particle physics experiments at the European Center of Nuclear Research (CERN) Large Hadron Collider (LHC) was a determinant factor for these collaborations to deliver physics results of outstanding quality faster than any hadron collider experiment ever before. This review article highlights the impact of detector simulation on particle physics collider experiments. It presents numerous examples of the use of simulation, from detector design and optimization, through software and computing development and testing, to cases where the use of simulation samples made a difference in the accuracy of the physics results and publication turnaround, from data-taking to submission. It also presents the economic impact and cost of simulation in the CMS experiment. Future experiments will collect orders of magnitude more data, taxing heavily the performance of simulation and reconstruction software for increasingly complex detectors. Consequently, it becomes urgent to find solutions to speed up simulation software in order to cope with the increased demand in a time of flat budgets. The study ends with a short discussion on the potential solutions that are being explored, by leveraging core count growth in multicore machines, using new generation coprocessors, and re-engineering of HEP code for concurrency and parallel computing.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

2024 Software for NASA Science Mission Directorate Workshop Report

The 2024 Software for the NASA Science Mission Directorate Workshop was the first workshop of its kind in over 10 years. The numerous attendees and high level of interaction in this hybrid workshop portrayed the untapped interest and energy in the NASA SMD community about software. Over 100 takeaways were collected from the hosted discussions in four key areas - Communication, Communities, Funding and Clarity - as summarized in this report. One takeaway was representative of all four categories: “Software is not hardware; it is organic and needs a different model. You often don't know which components will be Open-Source reusable until later in the development cycle.” For the communication category, this takeaway motivates the reduction of silos by shifting towards a model that better supports community collaboration on common challenges and a more streamlined and improved software release process. For the communities category, the same statement points to forming communities of practice with varying scopes and a new approach to recognition and incentives for open-source software contributions. Concerning funding, this statement motivates a more sustained and flexible funding model that better supports the software foundation needed for NASA’s long-term success, including the collaboration and infrastructure a good foundation requires. The new approach to clarity motivated by this statement calls for significant changes to the software release process and related policies to streamline compliance, align those policies with the open-source science culture NASA is promoting and with each other, and simplify use of the cloud. It is time to recognize software as a foundational component of NASA with an organic nature not properly supported by current approaches. Different models are needed in all four areas to shift the NASA SMD software community and governance structures into a more efficient, open, and collaborative ecosystem - one that enables ground-breaking science and daring exploration into the coming decades

science↗

Laser-Processed Condensing Heat Exchanger for Space Applications

In sizing a condensing heat exchanger for space life support systems, there is a limit to allowable pressure drop along with a required vapor recuperation rate. This sizing is performed by using known heat transfer and pressure drop correlations in a numerical model. Dimpling the surface of an air-liquid channeled heat exchanger increases the convective heat transfer rate however creates difficulties within the numerical model as the flat plate correlations are no longer accurate. To increase the fidelity of the numerical model used for sizing the heat exchanger Computational Fluid Dynamics (CFD) with an SST k-ω turbulence model was performed on a periodic portion of the heat exchanger. Through CFD modeling a heat flux and pressure drop was measured across the heat exchanger channel, this information was used to create a localized Nusselt number that was incorporated into the numerical model along with a more accurate pressure drop due to the dimpled surface. Additionally, through modeling the heat exchanger after manufacturing and assembly in Computer Aided Drafting (CAD) software there was an increase in the measurement accuracy of geometric features which was incorporated into the numerical model for further increase in fidelity.

heat exchanger↗