Search NASA⌕ Search

SEARCH · Search NASA

Results for “patterned beam”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Microlens-Enhanced Substrate Patterning and MBE Growth of GaP Nanowires

In this paper we demonstrate the results on selective area growth of GaP nanowires via self-catalyzed growth method using molecular beam epitaxy (MBE) technique on patterned Si(111) substrates. The pattern fabrication method on a base of the photolithography process over an array of microspherical lenses has been studied theoretically and then optimized in order to obtain the nanostructures with controlled morphology. It was found that the positive resist thickness corresponding to the best achievable resolution in the subwavelength region is 250 nm in case of 1.5 μm silica spheres and excitation with 365 nm LED. The silica growth mask for selective epitaxy was fabricated. The ordered array of GaP nanowires was synthesized with MBE. Large scale ordering and selectivity of the growth technique is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoscale kinetics and dynamics during Ar + patterning of SiO 2

Broad-beam low-energy ion bombardment can lead to the spontaneous formation of nanoscale surface structures, but the dominant mechanisms driving evolution remain controversial. Using coherent x-ray scattering to examine the classic case of ion-beam rippling of SiO 2 surfaces, we study the relationship between the average kinetics of ripple formation and the underlying fluctuation dynamics. The early stage growth of fluctuations is well fit with a linear theory formalism employing a viscous relaxation term with full wave-number dependence. In this regime, the x-ray photon correlation spectroscopy two-time correlation function shows distinctive behavior with memory stretching back to the beginning of the bombardment. For a given length scale, correlation times do not grow significantly beyond the characteristic time associated with the early-stage ripple growth. In the late stages of patterning, when the average surface structure on a given length scale is no longer evolving, dynamical processes continue on the surface. Nonlinear processes dominate at long length scales, leading to compressed exponential decay of the speckle correlation functions, while at short length scales the dynamics appears to approach a linear behavior consistent with viscous flow relaxation. This behavior is found to be consistent with simulations of a recent nonlinear growth model. In addition, it is shown that the surface ripple velocity, an important parameter of the ion-driven surface evolution, can be measured with coherent x-ray scattering in conjunction with use of an inhomogeneous ion beam. The change in viewpoint exemplified by this study, from a focus on only average surface kinetics to one incorporating the underlying nanoscale dynamics, is rapidly becoming more widely applicable as new and upgraded x-ray sources with higher coherent flux come online.

36 MATERIALS SCIENCE↗

Disorder and vortex matching effects in nanoperforated ultrathin TiN films.

We present the results of the comparative study of low-temperature transport properties of critically disordered nanoperforated titanium nitride films of the thickness less than the superconducting coherence length, {zeta}{sub d}. The samples were patterned by the electron beam lithography and the subsequent plasma etching to form a square array of holes, with the hole diameter being {ge} 2 {zeta}{sub d} and the center to center separation being 80 nm. In the wide temperature region below the superconducting critical temperature, T{sub c}, we observe a periodic dependence of the resistance upon the external magnetic field, with the period corresponding to the magnetic flux quantum per unit cell. On top of that we see secondary minima at the half-integer quanta points. We find that the effect of perforation on the low-temperature ({le} 0.1 T{sub c}) magnetoresistance depends drastically on the degree of disorder. Namely, in the moderately disordered films (k{sub F}l {approx_equal} 3) the perforation results in the shift of magnetoresistance curves towards higher fields as compared to those of the original films, while in the more disordered films (k{sub F}l {approx_equal} 1), the perforation gives rise to the shift of the magnetoresistance in the opposite direction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High throughput crystal structure and composition mapping of crystalline nanoprecipitates in alloys by transmission Kikuchi diffraction and analytical electron microscopy

Statistically significant crystal structure and composition identification of nanocrystalline features such as nanoparticles/nanoprecipitates in materials chemistry and alloy designing using electron microscopy remains a grand challenge. In this paper, we reveal that differing crystallographic phases of nanoprecipitates in alloys can be mapped with unprecedented statistics using transmission Kikuchi diffraction (TKD), on typical carbon-based electron-transparent samples. Using a case of multiphase, multicomponent nanoprecipitates extracted from an improved version of 9% chromium Eurofer-97 reduced-activation ferritic-martensitic steel we show that TKD successfully identified more than thousand M 23 C 6 , MX, M 7 C 3 , and M 2 X ( M =Fe, Cr, W, V, Ta; X = C, N) nanoprecipitates in a single scan, something that is currently unachievable using a transmission electron microscope (TEM) without incorporating a precision electron diffraction (PED) system. Precipitates as small as ~20–25 nm were successfully phase identified by TKD. We verified the TKD phase identification using high-resolution transmission electron microscopy (HRTEM) and convergent beam electron diffraction (CBED) pattern analysis of a few precipitates that were identified by TKD on same sample. TKD study was combined with state-of-art analytical scanning transmission electron microscopy (STEM)-energy dispersive X-ray (EDX) spectroscopy and multivariate statistical analysis (MVSA) which provided the complete crystal structure and distinct chemistries of the precipitates in the steel in a high throughput automated way. This technique should be applicable to characterizing any multiphase crystalline nanoparticles or nanomaterials. Furthermore the results highlight that combining phase identification by TKD with analytical STEM and modern data analytics may open new pathways in big data material characterization at nanoscale that may be highly beneficial for characterizing existing materials and in designing new materials.

36 MATERIALS SCIENCE↗

Probing Light Atoms at Subnanometer Resolution: Realization of Scanning Transmission Electron Microscope Holography

Atomic resolution imaging of light elements in electron-transparent materials has long been a challenge. Biomolecular materials, for example, are rapidly altered by incident electrons. We demonstrate a scanning transmission electron microscopy (STEM) technique, called STEM holography, capable of efficient structural analysis of beam-sensitive nanomaterials. STEM holography measures the absolute phase and amplitude of electrons passed through a specimen via interference with a vacuum reference wave. We use an amplitude-dividing nanofabricated grating to prepare multiple beams focused at the sample. We configure the postspecimen microscope imaging system to overlap the beams, forming an interference pattern. We record and analyze the pattern at each 2D-raster-scan-position, reconstructing the complex object wave. As a demonstration, we image gold nanoparticles on an amorphous carbon substrate at 2.4 Å resolution. In conclusion STEM holography offers higher contrast of the carbon while maintaining gold atomic lattice resolution compared to high angle annular dark field STEM.

4D-STEM↗

THz Radar Observations of Hydrometeors in a Spray Chamber

Abstract A THz radar, with its wide bandwidth, is capable of high‐resolution imaging down to the centimeter scale. In this study, a THz radar is applied to detect hydrometeors generated in a spray chamber. The observed backscattering signals show fluctuations at centimeter scales, indicating various hydrometeor distribution patterns along the radar beam. A co‐located High‐Speed Imaging (HSI) sensor is used to measure the Drop Size Distributions (DSD) in the spray chamber. The radar sampling beam is well aligned with the HSI probes, allowing an objective comparison between the remote sensing and in situ observations. In this study, the observed radar power is compared with the power estimated from the HSI measurements. Results show great consistency, with power difference smaller than 0.5 dB. This study demonstrates the feasibility and great potential of using a THz radar for ultra‐high‐resolution observations of clouds in a laboratory facility, and in the real atmosphere.

54 ENVIRONMENTAL SCIENCES↗

Tuning of the nucleation field in nanowires with perpendicular magnetic anisotropy

We report on domain nucleation in nanowires consisting of Co/Pt multilayers with perpendicular magnetic anisotropy that are patterned by electron-beam lithography, sputter deposition, and lift-off processing. It is found that the nucleation field can be tuned by changing the geometry of the wire ends. A reduction of the nucleation field by up to 60% is achieved when the wire ends are designed as tips. This contrasts with the behavior of wires with in-plane anisotropy where the nucleation field increases when triangular-pointed ends are used. In order to clarify the origin of the reduction of the nucleation field, micromagnetic simulations are employed. The effect cannot be explained by the lateral geometrical variation but is attributable to a local reduction of the perpendicular anisotropy caused by shadowing effects due to the resist mask during sputter deposition of the multilayer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quantitative magnetic imaging at the nanometer scale by ballistic electron magnetic microscopy

We demonstrate quantitative ballistic electron magnetic microscopy (BEMM) imaging of simple model Fe(001) nanostructures. We use in situ nanostencil shadow mask resistless patterning combined with molecular beam epitaxy deposition to prepare under ultra-high vacuum conditions nanostructured epitaxial Fe/Au/Fe/GaAs(001) spin-valves. In this epitaxial system, the magnetization of the bottom Fe/GaAs(001) electrode is parallel to the [110] direction, defining accurately the analysis direction for the BEMM experiments. The large hot-electron magnetoresistance of the Fe/Au/Fe/GaAs(001) epitaxial spin-valve allows us to image various stable magnetic configurations on the as-grown Fe(001) microstructures with a high sensitivity, even for small misalignments of both magnetic electrodes. The angular dependence of the hot-electron magnetocurrent is used to convert magnetization maps calculated by micromagnetic simulations into simulated BEMM images. The calculated BEMM images and magnetization rotation profiles show quantitative agreement with experiments and allow us to investigate the magnetic phase diagram of these model Fe(001) microstructures. Finally, magnetic domain reversals are observed under high current density pulses. This opens the way for further BEMM investigations of current-induced magnetization dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three-dimensional folding of pre-strained polymer sheets via absorption of laser light

Patterned light from a laser can induce rapid self-folding of pre-strained polymer sheets. Black ink coated on the sheet absorbs the light, which converts the photon energy into thermal energy that heats the sheet locally; the temperature of the sheet is highest at the surface where the light impinges on the sheet and decreases through the sheet thickness. The gradient of temperature induces a gradient of strain relaxation through the depth of the sheet, which causes folding within seconds of irradiation. The pattern of laser light that irradiates the compositionally homogeneous two-dimensional (2D) substrate dictates the resulting three-dimensional (3D) shape. Unlike most approaches to self-folding, the methodology described here requires no patterning of pre-defined hinges. It opens up the possibility of using a patterning technique that is inherently 2D to form 3D shapes. The use of lasers also enables systematic control of key process parameters such as power, intensity, and the pattern of light (i.e., beam width and shape). The rate of folding and folding angle measured with respect to these parameters provide an indirect quantification of heat loss in the sample and thereby identify the threshold power and power intensity that must be delivered to the hinge for folding to occur.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain and morphology of graphene membranes on responsive microhydrogel patterns

We study the configuration of atomically-thin graphene membranes on tunable microhydrogel patterns. The polyethylene oxide microhydrogel structures patterned by electron-beam lithography show increase in height, with a persistent swelling ratio up to ∼10, upon exposure to vapors of an organic solvent. We demonstrate that modifying the height fluctuations of the microhydrogel affects the strain and morphology of ultrathin graphene membrane over-layer. Raman spectroscopic investigations indicate that small lattice strains can be switched on in mechanically exfoliated few-layer graphene membranes that span these microhydrogel structures. In case of chemical-vapor deposited single-layer graphene, we observe Raman signatures of local depinning of the membranes upon swelling of microhydrogel pillars. We attribute this depinning transition to the competition between membrane-substrate adhesion energy and membrane strain energy, where the latter is tuned by hydrogel swelling.

36 MATERIALS SCIENCE↗

Study of diffraction-coupled lasing in a set of lasers with self-pumped phase-conjugate mirrors on gain gratings in the case of short-range coupling

Compact schemes of a multichannel holographic laser system with short-range coupling and increased efficiency of single-mode lasing are developed for low-gain laser media operating not only at the fundamental laser transition but also at other laser transitions of the Nd:YAG crystal. The numerical simulation shows that the maximum possible number of laser channels can be increased by equalising their parameters. The possibility of phase locking of two loop Nd:YAG lasers without a nonreciprocal element with the free-running single-mode lasing efficiency up to 0.64% and the contrast of the interference pattern of the output beams exceeding 0.5 is shown experimentally. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dispersion management of the SULF front end

To manage dispersion of the front end in the Shanghai Superintense Ultrafast Laser Facility (SULF), which is a large-scale project aimed at delivering 10 PW laser pulses, a stretcher based on a combination of a grating and a prism (grism) pair is inserted between an Öffner-triplet-type stretcher and a regenerative amplifier to reduce high-order dispersion introduced by optical materials at the amplification stage. The alignment of the grism pair is implemented by controlling the far-field pattern of the output beam of the grism pair. The energy of the front end reaches up to 7 J at a 1-Hz repetition rate. Experimental results show that the pulse duration can be compressed to 22.4 fs and the spectral distortion over the spectrum is less than 2.25 rad. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Point group symmetry of cadmium arsenide thin films determined by convergent beam electron diffraction

Cadmium arsenide (Cd 3 As 2 ) is one of the first materials to be discovered to belong to the class of three-dimensional topological semimetals. Reported room-temperature crystal structures of Cd 3 As 2 differ subtly in the way the Cd vacancies are arranged within its antifluorite-derived structure, which determines if an inversion center is present and if Cd 3 As 2 is a Dirac or Weyl semimetal. Here, we apply convergent beam electron diffraction (CBED) to determine the point group of Cd 3 As 2 thin films grown by molecular-beam epitaxy. Using CBED patterns from multiple zone axes, high-angle annular dark-field images acquired in scanning transmission electron microscopy, and Bloch wave simulations, we show that Cd 3 As 2 belongs to the tetragonal 4/mmm point group, which is centrosymmetric. In conclusion, the results show that CBED can distinguish very subtle differences in the crystal structure of a topological semimetal, a capability that will be useful for designing materials and thin film heterostructures with topological states that depend on the presence of certain crystal symmetries.

36 MATERIALS SCIENCE↗

Building an Adaptive Optics Demonstrator System

Adaptive optics is used to correct the wavefront of a beam of light. It originated in the field of astronomy to correct for atmospheric turbulence. This project was to construct an adaptive optics (AO) system kit from Thorlabs. An AO system consists of three parts: a deformable mirror (DM), a wavefront sensor (WFS), and control software. This system is to be used for future teaching purposes to help others learn about adaptive optics. The AO system came with instruction manuals, which were followed to build and calibrate the system. The instructions included building and aligning the system, how to install and use the software, and how to calibrate deformable mirror. A calibrated system for this project means having the deformable mirror imaged onto the wavefront sensor, with the center of the mirror on the center of the WFS. Also, a flat wavefront, which is achieved by eliminating the tip/tilt of the mirror. Eliminating the tip/tilt reduces the RMS amplitude to a value below 0.200 microns. This causes the wavefront to fold in on itself. We set up a focal plane detector behind beam splitter as a demonstration of what would be seen if this were used with a telescope. The image that should be seen on the focal plane detector is the beam with a diffraction pattern called and Airy Function. The AO system is now ready to be used to teach others about adaptive optics.

79 ASTRONOMY AND ASTROPHYSICS↗

Development of a Beam Sweeping System for the Fermilab Antiproton Source Target

Intensity of the incident 120-GeV proton beam on the antiproton production target is scheduled to increase to 5x10 12 protons per pulse. To prevent damage to the target, we plan to spread the hot spot on target with a beam sweeping system, Now under development are rotating-field magnets for installation upstream and downstream of the target. These magnets will deflect the beam in a circular pattern on the target. Peak current of 7 kA and peak voltage drop of 6 kV are expected. The power supply, which is separated from the magnet by a distance of about 10 m, utilizes magnetic pulse compression by saturating inductors to drive the magnets through the long transmission lines.

43 PARTICLE ACCELERATORS↗

The automated array assembly task of the low-cost silicon solar array project, phase 2

Several specific processing steps as part of a total process sequence for manufacturing silicon solar cells were studied. Ion implantation was identified as the preferred process step for impurity doping. Unanalyzed beam ion implantation was shown to have major cost advantages over analyzed beam implantation. Further, high quality cells were fabricated using a high current unanalyzed beam. Mechanically masked plasma patterning of silicon nitride was shown to be capable of forming fine lines on silicon surfaces with spacings between mask and substrate as great as 250 micrometers. Extensive work was performed on advances in plated metallization. The need for the thick electroless palladium layer was eliminated. Further, copper was successfully utilized as a conductor layer utilizing nickel as a barrier to copper diffusion into the silicon. Plasma etching of silicon for texturing and saw damage removal was shown technically feasible but not cost effective compared to wet chemical etching techniques.

Coleman, M. G.↗

Repetitive Q-switched operation of x-axis Nd:La2Be2O5

The repetitive Q-switched performances of an x-axis neodymium-doped lanthanum beryllate (Nd:BeL) laser and the current state-of-the-art Nd:YAG laser are compared. Output beam pulse energy, peak power, pulse width, beam divergence and mode pattern were measured for a gold-plated single elliptical cavity using a xenon flashlamp for excitation. The output of the Nd:BeL laser is found to exceed that of the Nd:YAG laser by a factor of two at Q-switched repetition rates on the order of 1 Hz, due to the smaller stimulated emission cross section of the x-axis Nd:BeL. When the repetition rate is increased to 10 Hz, the Nd:BeL output falls to a level three fifths lower than its low-rate value, while Nd:YAG output remained essentially constant. Analysis reveals that the decrease in output may be attributed to a depolarization loss due to thermally induced stress birefringence.

Tucker, A. W.↗