Search NASA⌕ Search

SEARCH · Search NASA

Results for “rectifiers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

The role of probe oxide in local surface conductivity measurements

Local probe methods can be used to measure nanoscale surface conductivity, but some techniques including nanoscale four point probe rely on at least two of the probes forming the same low resistivity non-rectifying contact to the sample. Here, the role of probe shank oxide has been examined by carrying out contact and non-contact I V measurements on GaAs when the probe oxide has been controllably reduced, both experimentally and in simulation. In contact, the barrier height is pinned but the barrier shape changes with probe shank oxide dimensions. In non-contact measurements, the oxide modifies the electrostatic interaction inducing a quantum dot that alters the tunneling behavior. For both, the contact resistance change is dependent on polarity, which violates the assumption required for four point probe to remove probe contact resistance from the measured conductivity. This has implications for all nanoscale surface probe measurements and macroscopic four point probe, both in air and vacuum, where the role of probe oxide contamination is not well understood.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Facile fabrication of a ultraviolet tunable MoS{sub 2}/p-Si junction diode

Chemical vapor deposition grown MoS{sub 2} single crystals were transferred onto the edge of a p-Si/SiO{sub 2} wafer, forming an abrupt heterogeneous junction diode at the MoS{sub 2}/p-Si interface. When electrically characterized as a field effect transistor, MoS{sub 2} exhibits an n-type response and can be doped in the presence of ultraviolet (UV) light. As a diode, it operates satisfactorily in air, but has higher currents in vacuum with a turn on voltage of ∼1.3 V and an on/off ratio of 20 at ±2 V. UV irradiation increases the diode on state current, decreases the turn-on voltage, and reduces the ideality parameter below 2. These changes are reversible after annealing in air as desorption of electron trapping species like O{sub 2}{sup −} and H{sub 2}O{sup −} are believed responsible for this effect. A circuit integrating this diode was used to rectify a 1 kHz signal with an efficiency of 12%. Its simple design, coupled with the ability to clip AC signals, sense UV light, and reversibly tune these diodes, makes them inexpensive, multifunctional, and usable as active or passive circuit components in complex electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A linear radio frequency plasma reactor for potential and current mapping in a magnetized plasma

Langmuir probe measurements in front of high power ion cyclotron resonant frequency antennas are not possible or simply too noisy to be analyzed properly. A linear experiment is a radio frequency (RF) magnetized plasma discharge reactor designed to probe the rectified potential in front of such antennas but at low power level (1 kW) to next improve antenna design and mitigate sheath effects. The maximum magnetic field is 0.1 T, and the RF amplifier can work between 10 kHz and 250 MHz allowing ion cyclotron resonances for argon or helium. The first measurements with no magnetic field are presented here, especially 2D potential maps extracted from the RF compensated probe measurements yield ni ≈ 10{sup 15} m{sup −3} and Te ≈ 2 eV for RF power lower than 100 W. Series resonances in the chamber are highlighted and allow to deduce the plasma parameters from a simple equivalent impedance model of the plasma in helium gas. Next studies will be focused on magnetized plasmas and especially magnetized RF sheaths.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ultraviolet-enhanced light emitting diode employing individual ZnO microwire with SiO{sub 2} barrier layers

This paper details the fabrication of n-ZnO single microwire (SMW)-based high-purity ultraviolet light-emitting diodes (UV-LEDs) with an added SiO{sub 2} barrier layer on the p-Si substrate. However, the current-voltage (I-V) curve exhibited non-ideal rectifying characteristics. Under forward bias, both UV and visible emissions could be detected by electroluminescence (EL) measurement. When bias voltage reached 60 V at room temperature, a UV emission spike occurred at 390 nm originating from the n-ZnO SMW. Compared with the EL spectrum of the n-ZnO SMW/p-Si heterojunction device without the SiO{sub 2} barrier layer, we saw improved UV light extraction efficiency from the current-blocking effect of the SiO{sub 2} layer. The intense UV emission in the n-ZnO SMW/SiO{sub 2}/p-Si heterojunction indicated that the SiO{sub 2} barrier layer can restrict the movement of electrons as expected and result in effective electron-hole recombination in ZnO SMW.

36 MATERIALS SCIENCE↗

Analysis of current-voltage characteristics of Au/pentacene/fluorine polymer/indium zinc oxide diodes by electric-field-induced optical second-harmonic generation

By using electric-field-induced optical second-harmonic generation measurement coupled with the conventional current-voltage (I-V) measurement, we studied the carrier transport of organic double-layer diodes with a Au/pentacene/fluorine polymer (FP)/indium zinc oxide (IZO) structure. The rectifying I-V characteristics were converted into the I-E characteristics of the FP and pentacene layers. Results suggest a model in which Schottky-type electron injection from the IZO electrode to the FP layer governs the forward electrical conduction (V > 0), where the space charge electric field produced in the FP layer by accumulated holes at the pentacene/FP interface makes a significant contribution. On the other hand, Schottky-type injection by accumulated interface electrons from the pentacene layer to the FP layer governs the backward electrical conduction (V < 0). The electroluminescence generated from the pentacene layer in the region V > 0 verifies the electron transport across the FP layer, and supports the above suggested model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Trap modulated photoresponse of InGaN/Si isotype heterojunction at zero-bias

n-n isotype heterojunction of InGaN and bare Si (111) was formed by plasma assisted molecular beam epitaxy without nitridation steps or buffer layers. High resolution X-ray diffraction studies were carried out to confirm the formation of epilayers on Si (111). X-ray rocking curves revealed the presence of large number of edge threading dislocations at the interface. Room temperature photoluminescence studies were carried out to confirm the bandgap and the presence of defects. Temperature dependent I-V measurements of Al/InGaN/Si (111)/Al taken in dark confirm the rectifying nature of the device. I-V characteristics under UV illumination, showed modest rectification and was operated at zero bias making it a self-powered device. A band diagram of the heterojunction is proposed to understand the transport mechanism for self-powered functioning of the device.

36 MATERIALS SCIENCE↗

Near-infrared photodetectors utilizing MoS{sub 2}-based heterojunctions

Near-infrared photodetectors are developed using graphene/MoS{sub 2} and WSe{sub 2}/MoS{sub 2} vertical heterojunctions. These heterojunctions exhibit diode-rectifying behavior in the dark and enhanced photocurrent upon near-infrared irradiation. The photocurrent increases with increasing near-infrared power, leading to the photoresponsibility of 0.14 and 0.3 A W{sup −1} for the graphene/MoS{sub 2} and WSe{sub 2}/MoS{sub 2} heterojunctions, respectively, which are much higher than the photoresponsibility reported for a multilayer MoS{sub 2} phototransistor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of vacancies in tuning the electronic properties of Au-MoS{sub 2} contact

Understanding the electronic properties between molybdenum disulfide (MoS{sub 2}) and metal electrodes is vital for the designing and realization of nanoelectronic devices. In this work, influence of intrinsic vacancies in monolayer MoS{sub 2} on the electronic structure and electron properties of Au-MoS{sub 2} contacts is investigated using first-principles calculations. Upon formation of vacancies in monolayer MoS{sub 2}, both tunnel barriers and Schottky Barriers between metal Au and monolayer MoS{sub 2} are decreased. Perfect Au-MoS{sub 2} top contact exhibits physisorption interface with rectifying character, whereas Au-MoS{sub 2} contact with Mo-vacancy shows chemisorption interface with Ohmic character. Partial density of states and electron density of defective Au-MoS{sub 2} top contacts are much higher than those of perfect one, indicating the lower contact resistance and higher electron injection efficiency of defective Au-MoS{sub 2} top contacts. Notably, Mo-vacancy in monolayer MoS{sub 2} is beneficial to get high quality p-type Au-MoS{sub 2} top contact, whereas S-vacancy in monolayer MoS{sub 2} is favorable to achieve high quality n-type Au-MoS{sub 2} top contact. Our results provide guidelines for designing and fabrication of novel 2D nanoelectronic devices.

36 MATERIALS SCIENCE↗

Deep traps and photo-electric properties of p-Si/MgO/n-Zn{sub 1−x}Mg{sub x}O heterojunction

In the paper, the photoluminescence (PL) measurements, current–voltage–temperature (I-V-T) measurements, space charge techniques (C-V and deep level transient spectroscopy (DLTS)), and photocurrent spectral characteristics have been applied to investigate defects in p-Si/MgO/ n-Zn{sub 1−x}Mg{sub x}O heterojunction (HJ). The HJ structure was grown on p-type Si (111) substrate with resistivity equal to 0.1 Ω cm by the plasma-assisted molecular beam epitaxy technique. A radio-frequency cell was used for the generation of oxygen plasma. PL spectrum let us determine the Mg content ∼10%. Besides the excitonic Zn{sub 0.9}Mg{sub 0.1}O line, the PL spectrum also contains green and yellow emission bands indicating the presence of defect states in the investigated structures. I-V measurements reveal the rectifying properties of the HJ and the current thermally activated with a trap with the activation energy equal to 0.42 eV. DLTS studies yield the majority trap of the activation energy 0.42 eV, confirming the result obtained from the I-V measurements. It was found that the defects related to this trap have a point like behaviour. A spectral characteristic of the photocurrent shows that the p-Si/MgO/n-Zn{sub 1−x}Mg{sub x}O HJ may be applied as a photodiode operating within the wavelength range of 300 nm-1100 nm. The dark current transport and photocurrent spectrum were explained using the Anderson model of a HJ.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

n-ZnO/p-4H-SiC diode: Structural, electrical, and photoresponse characteristics

Epitaxial n-type ZnO film has been grown, on a commercial 5 μm thick p-type 4H-SiC(00.1) Al doped epilayer, by atomic layer deposition. A full width at half maximum of the ZnO 00.2 diffraction peak rocking curve of 0.34°{sup }± 0.02° has been measured. Diodes formed on the n-ZnO/p-4H-SiC heterostructure show rectifying behavior with a forward to reverse current ratio at the level of 10{sup 9} at ±4 V, a leakage current density of ∼6 × 10{sup −8} A/cm{sup 2}, and a low ideality factor equal to 1.17 ± 0.04. In addition, the diodes exhibit selective photoresponse with a maximum at 367 nm, and with a current increase of ∼10{sup 3} under illuminations with respect to the dark value, which makes such devices prospective candidates for ultraviolet light sensors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Detection of alpha particles using DNA/Al Schottky junctions

Deoxyribonucleic acid or DNA can be utilized in an organic-metallic rectifying structure to detect radiation, especially alpha particles. This has become much more important in recent years due to crucial environmental detection needs in both peace and war. In this work, we fabricated an aluminum (Al)/DNA/Al structure and generated current–voltage characteristics upon exposure to alpha radiation. Two models were utilized to investigate these current profiles; the standard conventional thermionic emission model and Cheung and Cheung's method. Using these models, the barrier height, Richardson constant, ideality factor and series resistance of the metal-DNA-metal structure were analyzed in real time. The barrier height, Φ value calculated using the conventional method for non-radiated structure was 0.7149 eV, increasing to 0.7367 eV after 4 min of radiation. Barrier height values were observed to increase after 20, 30 and 40 min of radiation, except for 6, 8, and 10 min, which registered a decrease of about 0.67 eV. This was in comparison using Cheung and Cheung's method, which registered 0.6983 eV and 0.7528 eV for the non-radiated and 2 min of radiation, respectively. The barrier height values, meanwhile, were observed to decrease after 4 (0.61 eV) to 40 min (0.6945 eV). The study shows that conventional thermionic emission model could be practically utilized for estimating the diode parameters including the effect of series resistance. These changes in the electronic properties of the Al/DNA/Al junctions could therefore be utilized in the manufacture of sensitive alpha particle sensors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thermal stability of boron nitride/silicon p-n heterojunction diodes

Heterojunctions of p-type cubic boron nitride (cBN) and n-type silicon with sp{sup 2}-bonded BN (sp{sup 2}BN) interlayers are fabricated under low-energy ion impact by plasma-enhanced chemical vapor deposition, and their rectification properties are studied at temperatures up to 573 K. The rectification ratio is increased up to the order of 10{sup 5} at room temperature by optimizing the thickness of the sp{sup 2}BN interlayer and the cBN fraction for suppressing the reverse leakage current. A highly rectifying p-type cBN/thick sp{sup 2}BN/n-type silicon junction diode shows irreversible rectification properties mainly characterized by a marked decrease in reverse current by an order of magnitude in an initial temperature ramp/down cycle. This irreversible behavior is much more reduced by conducting the cycle twice or more. The temperature-dependent properties confirm an overall increase in effective barrier heights for carrier injection and conduction by biasing at high temperatures, which consequently increases the thermal stability of the diode performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Switchable photovoltaic and polarization modulated rectification in Si-integrated Pt/(Bi 0.9 Sm 0.1 )(Fe 0.97 Hf 0.03 )O 3 /LaNiO 3 heterostructures

In this paper, we studied switchable photovoltaic and photo-diode characteristics of Pt/(Bi 0.9 Sm 0.1 )(Fe 0.97 Hf 0.03 )O 3 / LaNiO 3 (Pt/BSFHO/LNO) heterostructures integrated on Si (100). The directions of photocurrent (J SC ) and rectification are found to be reversibly switchable after applying external poling voltages. In pristine state, metal-ferroelectric-metal capacitor Pt/BSFHO/LNO shows J SC ~ 32 μA/cm 2 and V OC ~ 0.04 V, which increase to maximum value of J SC ~ 303 (-206) μA/cm 2 and V OC ~ -0.32 (0.26) V after upward (downward) poling at ±8 V. Finally, we believe that Schottky barrier modulation by polarization flipping at Pt/BSFHO interface could be a main driving force behind switchable photovoltaic and rectifying diode characteristics of Pt/BSFHO/LNO heterostructures.

36 MATERIALS SCIENCE↗

A van der Waals pn heterojunction with organic/inorganic semiconductors

van der Waals (vdW) heterojunctions formed by two-dimensional (2D) materials have attracted tremendous attention due to their excellent electrical/optical properties and device applications. However, current 2D heterojunctions are largely limited to atomic crystals, and hybrid organic/inorganic structures are rarely explored. Here, we fabricate the hybrid 2D heterostructures with p-type dioctylbenzothienobenzothiophene (C{sub 8}-BTBT) and n-type MoS{sub 2}. We find that few-layer C{sub 8}-BTBT molecular crystals can be grown on monolayer MoS{sub 2} by vdW epitaxy, with pristine interface and controllable thickness down to monolayer. The operation of the C{sub 8}-BTBT/MoS{sub 2} vertical heterojunction devices is highly tunable by bias and gate voltages between three different regimes: interfacial recombination, tunneling, and blocking. The pn junction shows diode-like behavior with rectifying ratio up to 10{sup 5} at the room temperature. Our devices also exhibit photovoltaic responses with a power conversion efficiency of 0.31% and a photoresponsivity of 22 mA/W. With wide material combinations, such hybrid 2D structures will offer possibilities for opto-electronic devices that are not possible from individual constituents.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Estimation of sheath potentials in front of ASDEX upgrade ICRF antenna with SSWICH asymptotic code

Multi-megawatt Ion Cyclotron Range of Frequencies (ICRF) heating became problematic in ASDEX Upgrade (AUG) tokamak after coating of ICRF antenna limiters and other plasma facing components by tungsten. Strong impurity influx was indeed produced at levels of injected power markedly lower than in the previous experiments. It is assumed that the impurity production is mainly driven by parallel component of Radio-Frequency (RF) antenna electric near-field E// that is rectified in sheaths. In this contribution we estimate poloidal distribution of sheath Direct Current (DC) potential in front of the ICRF antenna and simulate its relative variations over the parametric scans performed during experiments, trying to reproduce some of the experimental observations. In addition, relative comparison between two types of AUG ICRF antenna configurations, used for experiments in 2014, has been performed. For this purpose we use the Torino Polytechnic Ion Cyclotron Antenna (TOPICA) code and asymptotic version of the Self-consistent Sheaths and Waves for Ion Cyclotron Heating (SSWICH) code. Further, we investigate correlation between amplitudes of the calculated oscillating sheath voltages and the E// fields computed at the lateral side of the antenna box, in relation with a heuristic antenna design strategy at IPP Garching to mitigate RF sheaths.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Heating performances of a IC in-blanket ring array

An important limiting factor to the use of ICRF as candidate heating method in a commercial reactor is due to the evanescence of the fast wave in vacuum and in most of the SOL layer, imposing proximity of the launching structure to the plasma boundary and causing, at the highest power level, high RF standing and DC rectified voltages at the plasma periphery, with frequent voltage breakdowns and enhanced local wall loading. In a previous work [1] the concept for an Ion Cyclotron Heating & Current Drive array (and using a different wave guide technology, a Lower Hybrid array) based on the use of periodic ring structure, integrated in the reactor blanket first wall and operating at high input power and low power density, was introduced. Based on the above concept, the heating performance of such array operating on a commercial fusion reactor is estimated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simultaneous high crystallinity and sub-bandgap optical absorptance in hyperdoped black silicon using nanosecond laser annealing

Hyperdoped black silicon fabricated with femtosecond laser irradiation has attracted interest for applications in infrared photodetectors and intermediate band photovoltaics due to its sub-bandgap optical absorptance and light-trapping surface. However, hyperdoped black silicon typically has an amorphous and polyphasic polycrystalline surface that can interfere with carrier transport, electrical rectification, and intermediate band formation. Past studies have used thermal annealing to obtain high crystallinity in hyperdoped black silicon, but thermal annealing causes a deactivation of the sub-bandgap optical absorptance. In this study, nanosecond laser annealing is used to obtain high crystallinity and remove pressure-induced phases in hyperdoped black silicon while maintaining high sub-bandgap optical absorptance and a light-trapping surface morphology. Furthermore, it is shown that nanosecond laser annealing reactivates the sub-bandgap optical absorptance of hyperdoped black silicon after deactivation by thermal annealing. Thermal annealing and nanosecond laser annealing can be combined in sequence to fabricate hyperdoped black silicon that simultaneously shows high crystallinity, high above-bandgap and sub-bandgap absorptance, and a rectifying electrical homojunction. Such nanosecond laser annealing could potentially be applied to non-equilibrium material systems beyond hyperdoped black silicon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generating single photons at gigahertz modulation-speed using electrically controlled quantum dot microlenses

We report on the generation of single-photon pulse trains at a repetition rate of up to 1 GHz. We achieve this speed by modulating the external voltage applied on an electrically contacted quantum dot microlens, which is optically excited by a continuous-wave laser. By modulating the photoluminescence of the quantum dot microlens using a square-wave voltage, single-photon emission is triggered with a response time as short as (281 ± 19) ps, being 6 times faster than the radiative lifetime of (1.75 ± 0.02) ns. This large reduction in the characteristic emission time is enabled by a rapid capacitive gating of emission from the quantum dot, which is placed in the intrinsic region of a p-i-n-junction biased below the onset of electroluminescence. Here, since our circuit acts as a rectifying differentiator, the rising edge of the applied voltage pulses triggers the emission of single photons from the optically excited quantum dot. The non-classical nature of the photon pulse train generated at GHz-speed is proven by intensity autocorrelation measurements with g{sup (2)}(0) = 0.3 ± 0.1. Our results combine optical excitation with fast electrical gating and thus show promise for the generation of indistinguishable single photons at rates exceeding the limitations set by the intrinsic radiative lifetime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗