Search NASA⌕ Search

SEARCH · Search NASA

Results for “sequential experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Exsolution Enhanced Oil Recovery with Concurrent CO2 Sequestration

A novel EOR method using carbonated water injection followed by depressurization is introduced. Results from micromodel experiments are presented to demonstrate the fundamental principles of this oil recovery method. A depressurization process (1 MPa/hr) was applied to a micromodel following carbonated water injection (Ca ≈ 10-5). The exsolved CO2 in water-filled pores blocked water flow in swiped portions and displaced water into oil-filled pores. Trapped oil after the carbonated water injection was mobilized by sequentially invading water. This method's self-distributed mobility control and local clogging was tested in a sandstone sample under reservoir conditions. A 10% incremental oil recovery was achieved by lowering the pressure 2 MPa below the CO2 liberation pressure. Additionally, exsolved CO2 resides in the pores of a reservoir as an immobile phase with a high residual saturation after oil production, exhibiting a potential synergy opportunity between CO2 EOR and CO2 sequestration

Environmental Molecular Sciences Laboratory↗

Coupling Surface Flow with High-performance Subsurface Reactive Flow and Transport Code PFLOTRAN

Water exchange between the surface and subsurface is important for both water resource management and environmental protection. In this paper, we develop coupled surface and subsurface flow simulation capability in a parallel subsurface flow and reactive transport code PFLOTRAN. We sequentially couple the diffusion wave-based surface flow with the subsurface flow governedby the Richards equation in PFLOTRAN. These two flow domains are linked with a boundary condition switching method that ensures continuity of pressure and flux at the surface-subsurface interface. We verify the coupled code against other existing hydrologic models and observation data using a number of numerical experiments. The coupled hydrological model exhibits good performance in strong parallel scaling tests. The new coupled surface and subsurface simulator significantly advance community simulation capability towards improving integrated hydrologic and biogeochemical understanding of complex systems such as watersheds and river corridors. Keywords: Surface flow, Integrated hydrological modeling, Boundary condition switching, Parallel computing

Wu, Runjian↗

Synchronization of clocks by very-long-baseline interferometry

Two hydrogen-maser clocks, one at Haystack Observatory and one at the National Radio Astronomy Observatory, were synchronized by means of observations of several extragalactic radio sources on March 28, and again on September 23, 1977. Observations were made sequentially in eight 360-kHz bands distributed between about 8.4 and 8.5 GHz with spacings designed to enable the group-delay difference between the signals received at the two observatories from a given source to be estimated unambiguously, within an uncertainty of less than 1 ns set by receiver noise. The epoch and the rate differences between the observatories' clocks for each experiment were estimated by analysis of observations that spanned several hours. The application of corrections for the contributions to the delays of the antennas, feeds, receiver systems, and recorders yielded absolute determinations of the clock epoch differences. During each experiment, portable cesium clocks were flown from the U.S. Naval Observatory to the observatories and back. The traveling-clock data, analyzed in each case after the VLBI synchronization had been completed, confirmed the VLBI results to within 18 and 14 ns for the first and second experiments, respectively.

Clark, T. A.↗

Conditions for Interference Versus Facilitation During Sequential Sensorimotor Adaptation

We investigated how sensorimotor adaptation acquired during one experimental session influenced the adaptation in a subsequent session. The subjects' task was to track a visual target using a joystick-controlled cursor, while the relationship between joystick and cursor position was manipulated to introduce a sensorimotor discordance. Each subject participated in two sessions, separated by a pause of 2 min to 1 month duration. We found that adaptation was achieved within minutes, and persisted in the memory for at least a month, with only a small decay (experiment A). When the discordances administered in the two sessions were in mutual conflict, we found evidence for task interference (experiment B). However, when the discordances were independent, we found facilitation rather than interference (experiment C); the latter finding could not be explained by the use of an "easier" discordance in the second session (experiment D). We conclude that interference is due to an incompatibility between task requirements, and not to a competition of tasks for short-term memory. We further conclude that the ability to adapt to a sensorimotor discordance.

Bock, Otmar↗

Complex and Unusual Excited-State Relaxation Dynamics of 9,9′-Bifluorenylidene Revealed by Comprehensive Time-Resolved Spectroscopy and MRSF-TDDFT Calculations

Design of novel photochemical molecular motors often requires molecular building blocks that exhibit rather unusual photoactivity, for which conventional analyses of spectroscopic data can lead to conflicting interpretations. We here systematically investigated the excited-state relaxation dynamics of one such molecule, 9,9′-bifluorenylidene (BF), through comprehensive and complementary integration of ultrafast transient absorption (TA) and femtosecond stimulated Raman (FSRS) spectroscopies and first-principles mixed-reference spin-flip time-dependent density functional theory (MRSF-TDDFT). TA and FSRS identified two sequentially formed transients following photoexcitation. The decay kinetics of the two intermediates differ in response to excitation wavelengths and the viscosity/polarity of solvents. MRSF-TDDFT calculations reveal a direct, barrierless internal-conversion pathway from the bright Franck−Condon state to a dark S1 minimum, where the excited-state population is transiently trapped, accounting for the first transient species observed in spectroscopic experiments. Further tracking down along the PES with MRSF-TDDFT mapped out two nonradiative relaxation pathways via conical intersections that connect the dark S 1 state to three configurations in the ground-state manifolds, within which a ring structure with a C8−C8′ bond and the vibrationally excited ground-state BF were identified from spectroscopic and kinetic data. The complexity of relaxation kinetics was attributed to the flexible torsional and twisting motions about the C9−C9′ bridge bond enabled by the diradical character of the S 1 state. These findings clarify unusual photoactive relaxation dynamics stemming from a novel correlation between structural flexibility and shifting electronic characteristics, and they demonstrate the importance of integrating spectroscopic and advanced electronic structure calculation studies for judicious clarification of complex, competing relaxation pathways of excited states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Removing Arsenic from Contaminated Drinking Water in Rural Bangladesh: Recent Fieldwork Results and Policy Implications

ARUBA (Arsenic Removal Using Bottom Ash) has proven effective at removing high concentrations of arsenic from drinking water in Bangladesh. During fieldwork in four sub-districts of the country, ARUBA reduced arsenic levels ranging from 200 to 900 ppb to below the Bangladesh standard of 50 ppb. The technology is cost-effective because the substrate--bottom ash from coal fired power plants--is a waste material readily available in South Asia. In comparison to similar technologies, ARUBA uses less media for arsenic removal due to its high surface area to volume ratio. Hence, less waste is produced. A number of experiments were conducted in Bangladesh to determine the effectiveness of various water treatment protocols. It was found that (1) ARUBA removes more than half of the arsenic from water within five minutes of treatment, (2) ARUBA, that has settled at the bottom of a treatment vessel, continues to remove arsenic for 2-3 days, (3) ARUBA's arsenic removal efficiency can be improved through sequential partial dosing (adding a given amount of ARUBA in fractions versus all at once), and (4) allowing water to first stand for two to three days followed by treatment with ARUBA produced final arsenic levels ten times lower than treating water directly out of the well. Our findings imply a number of tradeoffs between ARUBA's effective arsenic removal capacity, treatment system costs, and waste output. These tradeoffs, some a function of arsenic-related policies in Bangladesh (e.g., waste disposal regulations), must be considered when designing an arsenic removal system. We propose that the most attractive option is to use ARUBA in communityscale water treatment centers, installed as public-private partnerships, in Bangladeshi villages.

54 ENVIRONMENTAL SCIENCES↗

Surrogate Modeling and Optimization of a Combustor with an Interdigitated Flushwall Injector

Design and Analysis of Computer Experiments (DACE) methods are applied and used to perform surrogate modeling and optimization of a simplified combustor flowpath with an interdigitated flushwall injector. The objectives of the optimization are the thrust potential and combustion efficiency, which are evaluated across a range of flight Mach numbers, duct heights, spanwise spacings, and injection angles. The focus of this work is to highlight the application of a sequential learning approach, in order to learn about the responses of the objective functions over the design space and to identify local regions of interest for further analysis. This approach is contrasted to a previous effort where only a single sampling set was used to fit surrogate models and perform optimization. The optimal solutions resulting from the previous and present approaches are different, due to surrogate model-guided local refinement of the design space allowed by the sequential learning method. The values of the global error estimates between the previous and present approaches are comparable, but the sequential method proved more computationally cost-effective. Further refinement in the optimal regions might be needed to improve predictive capability of surrogate models and to obtain the optimal solutions sets.

Rajiv R Shenoy↗

Investigating two-photon double ionization of D2 by XUV-Pump -- XUV-Probe experiments at FLASH

Using a novel split-mirror set-up attached to a Reaction Microscope at the Free electron LASer in Hamburg (FLASH) we demonstrate an XUV-pump -- XUV-probe ((hbar omega = 38 eV) experiment by tracing the ultra-fast nuclear wave-packet motion in the D2+ (1s sigma g-state) with<10 fs time resolution. Comparison with time-dependent calculations yields excellent agreement with the measured vibrational period of 22+-4 fs in D2+, points to the importance of the inter-nuclear distance dependent ionization probability and paves the way to control sequential and non-sequential two-photon double ionization contributions.

43 PARTICLE ACCELERATORS↗

Tumor Engineering: The Other Face of Tissue Engineering

Advances in tissue engineering have been accomplished for years by employing biomimetic strategies to provide cells with aspects of their original microenvironment necessary to reconstitute a unit of both form and function for a given tissue.We believe that the most critical hallmark of cancer is loss of integration of architecture and function; thus, it stands to reason that similar strategies could be employed to understand tumor biology. In this commentary, we discuss work contributed by Fischbach-Teschl and colleagues to this special issue of Tissue Engineering in the context of 'tumor engineering', that is, the construction of complex cell culture models that recapitulate aspects of the in vivo tumor microenvironment to study the dynamics of tumor development, progression, and therapy on multiple scales. We provide examples of fundamental questions that could be answered by developing such models, and encourage the continued collaboration between physical scientists and life scientists not only for regenerative purposes, but also to unravel the complexity that is the tumor microenvironment. In 1993, Vacanti and Langer cast a spotlight on the growing gap between patients in need of organ transplants and the amount of available donor organs; they reaffirmed that tissue engineering could eventually address this problem by 'applying principles of engineering and the life sciences toward the development of biological substitutes. Mortality figures and direct health care costs for cancer patients rival those of patients who experience organ failure. Cancer is the second leading cause of death in the United States (Source: American Cancer Society) and it is estimated that direct medical costs for cancer patients approach $100B yearly in the United States alone (Source: National Cancer Institute). In addition, any promising therapy that emerges from the laboratory costs roughly $1.7B to take from bench to bedside. Whereas we have indeed waged war on cancer, the training grounds have largely consisted of small rodents, despite marked differences between human and mouse physiology, or plastic dishes, even though just like our tissues and organs most tumors exist within three-dimensional proteinacious milieus. One could argue that this is comparable to training for a desert war in the arctic. In this special issue of tissue engineering, Fischbach-Teschl and colleagues build a strong case for engineering complex cultures analogous to normal organs to tractably model aspects of the human tumor microenvironment that simply cannot be reproduced with traditional two-dimensional cell culture techniques and that cannot be studied in a controlled fashion in vivo. This idea has gained considerable traction of late as concepts presented and convincingly shown years ago have only now begun to be appreciated. Perhaps, then, it is time to organize those who wish to build complex tumor models to study cancer biology under a common umbrella. Accordingly, we propose that tumor engineering be defined as the construction of complex culture models that recapitulate aspects of the in vivo tumor microenvironment to study the dynamics of tumor development, progression, and therapy on multiple scales. Inherent in this definition is the collaboration that must occur between physical and life scientists to guide the design of patterning techniques, materials, and imaging modalities for the study of cancer from the subcellular to tissue level in physiologically relevant contexts. To date, the most successful tissue engineering approaches have employed methods that recapitulate the composition, architecture, and/or chemical presentation of native tissue. For instance, induction of blood vessel growth for therapeutic purposes has been achieved with sequential release of vascular endothelial growth factor (VEGF) and platelet derived growth factor to induce and stabilize blood vessels. This approach imitates that which occurs during physiological angiogenesis as a result of heterotypic interactions between endothelium and stroma. Employing such biomimetic strategies has already led to success in cancer research. Studying tumors in 3D has proven far more accurate in reproducing in vivo growth characteristics and chemotherapeutic resistance than 2D approaches. A number of animal studies and co-culture experiments have identified also the importance of interactions with other nonmalignant cell types - such as endothelial cells, fibroblasts, adipocytes, leukocytes, and circulating progenitors - to support and sustain tumor growth, invasion, and metastasis. Reproducing not only the 'dynamic reciprocity' but also the 'dynamic cooperativity' between these constituents in a spatially, temporally, and functionally accurate fashion presents quite a challenge for engineering tumors. So, why do it? The reason is to ask important fundamental questions that cannot easily be answered in vivo or on tissue culture plastic for the reasons mentioned.

59 BASIC BIOLOGICAL SCIENCES↗

Search for physics beyond the standard model in dilepton mass spectra in proton-proton collisions at √s = 8 TeV

Dimuon and dielectron mass spectra, obtained from data resulting from proton-proton collisions at 8 TeV and recorded by the CMS experiment, are used to search for both narrow resonances and broad deviations from standard model predictions. The data correspond to an integrated luminosity of 20.6 (19.7) fb –1 for the dimuon (dielectron) channel. No evidence for non-standard-model physics is observed and 95% confidence level limits are set on parameters from a number of new physics models. The narrow resonance analyses exclude a Sequential Standard Model Z SSM ' resonance lighter than 2.90 TeV, a superstring-inspired Z ψ ' lighter than 2.57 TeV, and Randall-Sundrum Kaluza-Klein gravitons with masses below 2.73, 2.35, and 1.27 TeV for couplings of 0.10, 0.05, and 0.01, respectively. A notable feature is that the limits have been calculated in a model-independent way to enable straightforward reinterpretation in any model predicting a resonance structure. The observed events are also interpreted within the framework of two non-resonant analyses: one based on a large extra dimensions model and one based on a quark and lepton compositeness model with a left-left isoscalar contact interaction. Lower limits are established on MS, the scale characterizing the onset of quantum gravity, which range from 4.9 to 3.3 TeV, where the number of additional spatial dimensions varies from 3 to 7. Thus lower limits on Λ, the energy scale parameter for the contact interaction, are found to be 12.0 (15.2) TeV for destructive (constructive) interference in the dimuon channel and 13.5 (18.3) TeV in the dielectron channel.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

ICON-A, the Atmosphere Component of the ICON Earth System Model: I. Model Description

ICON–A is the new icosahedral nonhydrostatic (ICON) atmospheric general circulation model in a configuration using the Max Planck Institute physics package, which originates from the ECHAM6 general circulation model, and has been adapted to account for the changed dynamical core framework. The coupling scheme between dynamics and physics employs a sequential updating by dynamics and physics, and a fixed sequence of the physical processes similar to ECHAM6. To allow a meaningful initial comparison between ICON–A and the established ECHAM6–LR model, a setup with similar, low resolution in terms of number of grid points and levels is chosen. The ICON–A model is tuned on the base of the Atmospheric Model Intercomparison Project (AMIP) experiment aiming primarily at a well balanced top–of atmosphere energy budget to make the model suitable for coupled climate and Earth system modeling. The tuning addresses first the moisture and cloud distribution to achieve the top–of–atmosphere energy balance, followed by the tuning of the parameterized dynamic drag aiming at reduced wind errors in the troposphere. The resulting version of ICON–A has overall biases, which are comparable to those of ECHAM6. Problematic specific biases remain in the vertical distribution of clouds and in the stratospheric circulation, where the winter vortices are too weak. Biases in precipitable water and tropospheric temperature are, however, reduced compared to the ECHAM6. As a result, ICON–A will serve as the basis of further development and as the atmosphere component to the coupled model, ICON–Earth system model (ESM).

54 ENVIRONMENTAL SCIENCES↗

CRN Modeling of Ammonia RQL Combustion using a Partially-Stirred Reactor Approach

Ammonia is a promising alternative to hydrogen with high energy density and favorable storage and transport characteristics. However low flammability and a propensity for high nitrogen oxide (NOx) emissions make direct utilization challenging. Recently, two-stage rich-quench-lean (RQL) combustion strategies have shown promise in achieving low NOx emissions with ammonia. In this approach, the rich stage serves to oxidize a portion of the fuel, while thermally decomposing as much of the remaining ammonia as possible, generating hydrogen. In the second (lean) stage, air is rapidly introduced, burning out the hydrogen and residual ammonia. Two-stage RQL combustion of ammonia has been investigated in the open literature both experimentally and numerically. In general, idealized chemical reactor network (CRN) models predict NOx concentrations below that of 2D/3D computational fluid dynamics models and experiments. The primary drivers of these discrepancies may be largely attributed to finite rate mixing non-adiabatic operation. The typical CRN model is comprised of a perfectly-stirred-reactor (PSR), followed by a plug-flow-reactor (PFR), meant to represent the flame, and post-flame zones, respectively. In the two-stage RQL approach two PSR-PFR networks are arranged sequentially, corresponding to the rich and lean stages, with secondary air injection in between. In the authors’ past work, this arrangement has demonstrated the significant sensitivity of exit NOx to the rich stage equivalence ratio, while the amount of secondary air injection was shown to be less critical. In this paper, the CRN model is extended to (1) include the impacts of heat loss and (2) utilize a partially-stirred-reactor (PaSR) approach to study the impacts of mixing on emissions performance. Varying amounts of heat loss are applied to the rich relaxation zone to understand emissions performance and changes to optimization of equivalence ratio and residence time. Premixed and non-premixed configurations are considered in the rich stage PaSR, with varying degrees of mixing intensity to study the interaction between mixing, transport, and kinetic timescales. Critically, the impact of mixing between hot products and secondary air injection is studied to understand practical injector needs. Results show unburnt ammonia leaving the rich stage as a primary contributor to NOx emissions – driven both by increased heat loss and reduced mixing rates. Furthermore, heat losses have shown to create conditions which are conducive to increased N2O formation in the lean stage. The results of this study will be considered in the context of developing optimized two-stage RQL combustors for ammonia..

advanced gas turbines↗

Time- and isomer-resolved measurements of sequential addition of acetylene to the propargyl radical

Soot formation in combustion is a complex process in which polycyclic aromatic hydrocarbons (PAHs) are believed to play a critical role. Recent works concluded that three consecutive additions of acetylene (C 2 H 2 ) to propargyl (C 3 H 3 ) create a facile route to the PAH indene (C 9 H 8 ). However, the isomeric forms of C 5 H 5 and C 7 H 7 intermediates in this reaction sequence are not known. We directly investigate these intermediates using time- and isomer-resolved experiments. Both the resonance stabilized vinylpropargyl ( vp -C 5 H 5 ) and 2,4-cyclopentadienyl ( c -C 5 H 5 ) radical isomers of C 5 H 5 are produced, with substantially different intensities at 800 K vs 1000 K. In agreement with literature master equation calculations, we find that c -C 5 H 5 + C 2 H 2 produces only the tropyl isomer of C 7 H 7 ( tp -C 7 H 7 ) below 1000 K, and that tp -C 7 H 7 + C 2 H 2 terminates the reaction sequence yielding C 9 H 8 (indene) + H. Lastly, this work demonstrates a pathway for PAH formation that does not proceed through benzene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amino-Acid-Modified-Cashew Gum Flocculant: Synthesis, Characterization, and Application

Amphoteric poly(O-methacryloyl-L-serine)-grafted cashew gum (CG-g-P(SerMA)) flocculant was obtained with highly efficient in separation and sequential recovery of kaolin particles from aqueous suspension. The highest flocculation efficiency was achieved with a flocculant synthesized using an O-methacryloyl-L-serine:cashew gum molar ratio of 3:1. The CG-g-P(SerMA) at a dosage of 3.0 mg L{sup −1} resulted in a flocculation efficiency of more than 90% within 20 min for kaolin suspension. The efficiency, in standard experiments, the flocculant CG-g-P(SerMA) was superior to cashew gum and polyacrylamide-based commercial flocculants. The flocculation mechanism involves electrostatic interactions between the negatively charged surface of the kaolin and the protonated amino groups of the flocculant under acidic conditions. These results provide new opportunities and challenges for understanding and improving the removal of impurities present in water and wastewater.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phosphorylation prevents C/EBP{beta} from the calpain-dependent degradation

Highlights: Black-Right-Pointing-Pointer Phosphorylation protected C/EBP{beta} from {mu}-calpain-mediated proteolysis in vitro. Black-Right-Pointing-Pointer Phosphorylation mimic C/EBP{beta} was insensitive to calpain accelerator and inhibitor. Black-Right-Pointing-Pointer Phosphorylation on Thr{sub 188} contributed more to the stabilization of C/EBP{beta}. -- Abstract: CCAAT/enhancer-binding protein (C/EBP) {beta} plays an important role in proliferation and differentiation of 3T3-L1 preadipocytes. C/EBP{beta} is sequentially phosphorylated during the 3T3-L1 adipocyte differentiation program, first by MAPK/Cyclin A/cdk2 on Thr{sub 188} and subsequently by GSK3{beta} on Ser{sub 184} or Thr{sub 179}. Dual phosphorylation is critical for the gain of DNA binding activity of C/EBP{beta}. In this manuscript, we found that phosphorylation also contributed to the stability of C/EBP{beta}. Both ex vivo and in vitro experiments showed that phosphorylation by MAPK/Cyclin A/cdk2 and GSK3{beta} protected C/EBP{beta} from {mu}-calpain-mediated proteolysis, while phosphorylation on Thr{sub 188} by MAPK/Cyclin A/cdk2 contributed more to the stabilization of C/EBP{beta}, Further studies indicated that phosphorylation mimic C/EBP{beta} was insensitive to both calpain accelerator and calpain inhibitor. Thus, phosphorylation might contribute to the stability as well as the gain of DNA binding activity of C/EBP{beta}.

60 APPLIED LIFE SCIENCES↗

Ab Initio Direct Dynamics

The reactivity and dynamics of molecular systems can be explored computationally by classical trajectory calculations. The traditional approach involves fitting a functional form of a potential energy surface (PES) to the energies from a large number of electronic structure calculations and then integrating numerous trajectories on this fitted PES to model the molecular dynamics. The ever-decreasing cost of computing and continuing advances in computational chemistry software have made it possible to use electronic structure calculations directly in molecular dynamics simulations without first having to construct a fitted PES. In this “on-the-fly” approach, every time the energy and its derivatives are needed for the integration of the equations of motion, they are obtained directly from quantum chemical calculations. This approach started to become practical in the mid-1990s as a result of increased availability of inexpensive computer resources and improved computational chemistry software. The application of direct dynamics calculations has grown rapidly over the last 25 years and would require a lengthy review article. The present Account is limited to some of our contributions to methods development and various applications. To improve the efficiency of direct dynamics calculations, we developed a Hessian-based predictor-corrector algorithm for integrating classical trajectories. Hessian updating made this even more efficient. Furthermore, this approach was also used to improve algorithms for following the steepest descent reaction paths. For larger molecular systems, we developed an extended Lagrangian approach in which the electronic structure is propagated along with the molecular structure. Strong field chemistry is a rapidly growing area, and to improve the accuracy of molecular dynamics in intense laser fields, we included the time-varying electric field in a novel predictor-corrector trajectory integration algorithm. Since intense laser fields can excite and ionize molecules, we extended our studies to include electron dynamics. Specifically, we developed code for time-dependent configuration interaction electron dynamics to simulate strong field ionization by intense laser pulses. Our initial application of ab initio direct dynamics in 1994 was to CH 2 O → H 2 + CO; the calculated vibrational distributions in the products were in very good agreement with experiment. In the intervening years, we have used direct dynamics to explore energy partitioning in various dissociation reactions, unimolecular dissociations yielding three fragments, reactions with branching after the transition state, nonstatistical dynamics of chemically activated molecules, dynamics of molecular fragmentation by intense infrared laser pulses, selective activation of specific dissociation channels by aligned intense infrared laser fields, angular dependence of strong field ionization, and simulation of sequential double ionization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fracture Characterization Via AI‐Assisted Analysis of Temperature Logs

Abstract Fractures control fluid flow, mass transport, and heat transfer in a geothermal reservoir. This makes accurate characterization of fracture networks a prerequisite for optimal design and control of a reservoir's exploitation. We develop a deep‐learning procedure to identify fracture locations via interpretation of temporally and spatially continuous downhole temperature measurements. A long short‐term memory fully convolutional network (LSTM‐FCN) is used both to capture long‐term dependencies in sequential temperature data and to distill local features around fractures. A wellbore and fractured‐reservoir thermal model is established to generate temperature data for network training. The trained LSTM‐FCN exhibits a unique ability to detect multiple fractures intersecting a borehole. We use the LSTM‐FCN algorithm to evaluate the effectiveness of different‐stage wellbore temperature measurements on fracture detection in a complex fractured system. Our experiments reveal that the use of various‐stage temperature information as an input feature set improves the robustness of fracture detection to noise interference. This study indicates the practical feasibility of obtaining accurate fracture‐network reconstructions from temperature signals, at reasonable computational cost.

Yang, Xiaoyu↗

Correction of Spherical Aberration in Grazing-Incidence X-ray Optics by Combination of Spherical-Concave Mirrors

In grazing-incidence total-reflection mirror optics for x-rays, spherical aberrations and coma are the most serious aberrations for microfocusing and microimaging. High-resolution imaging is believed to be possible only when an aspherical mirror system is used. However, the spherical aberrations of a spherical-concave mirror in a grazing-incidence condition can be eliminated by sequential reflection of spherical mirrors of similar shapes. A sub-micrometer one-dimensional focusing is easily achieved by the spherical-aberration-corrected tandem-spherical mirror optics. By configuring four spherical mirrors in an analogy of the crossed mirror optics (Kirkpatrick-Baez optics), it is possible to achieve sub-micrometer focused beam size in the hard x-ray region. Preliminary experiments on x-ray microfocusing have been carried out at beamline 20XU of SPring-8, and a 0.5 {mu}mx0.4 {mu}m beam size was achieved at 8 keV.

07 ISOTOPE AND RADIATION SOURCES↗