Search NASA⌕ Search

SEARCH · Search NASA

Results for “sintering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Multicycle flash sintering of cubic Y 2 O 3 -stabilized ZrO 2 : An in situ energy dispersive synchrotron x-ray diffraction study with high temporal resolution

The current induced unit cell volume changes, (111) Bragg peak full width at half maximum (FWHM) and its integrated intensity in 8 % Y 2 O 3 stabilized ZrO 2 (8 %YSZ) solid state electrolyte was monitored during a triple-flash sintering experiment by in situ energy dispersive x-ray diffraction using a polychromatic synchrotron probe (max, photon energy 200 keV) with 2 second temporal resolution. The first spontaneous singularity in the unit cell volume (+0.54 %) was observed at 899 °C under 15 V/mm applied field intensity, which was associated with 13 mA/mm 2 current draw and an increase in density to 97 %. Following anelastic relaxation of the unit cell volume under open circuit conditions, the same applied field was applied twice in a row which resulted in additional induced singularities at 925 °C (+0.48 %) and 944 °C (+0.42 %). A floating baseline, which was above the thermal expansion baseline, was observed from 833 to 969 °C and was attributed to Joule heating. In conclusion, the singularity at 899 °C is associated with a sharp change in (111) FWHM and a 34 % decrease in integrated peak area that was attributed to changes in the distribution of oxygen vacancies and the changes in their concentration as induced by the applied field in the spontaneous transient stage of flash sintering.

36 MATERIALS SCIENCE↗

In situ X-ray characterization of uranium dioxide during flash sintering

The in situ response of stoichiometric and non-stoichiometric uranium dioxide during flash sintering is examined using high energy X-ray diffraction. Our results show that the onset of flash is driven by an increase in temperature and controlled by the applied field with no evidence of an accumulation of defects. The incubation time, that is the time after the application of the field before the flash occurs, is found to be material specific with hyper-stoichiometric samples requiring lower fields to flash. For low current/voltage fields we quantify very little change in the atomic and microstructure of the different uranium dioxide samples post-flash. Microstructural changes are identified for high fields and currents, where joule heating and sample temperatures are high, resulting in the complete transformation of the U 4 O 9 phase. Our results highlight the usefulness of high energy X-ray characterization in understanding the subtle structural changes that occur during the flash sintering process.

36 MATERIALS SCIENCE↗

Revealing the Structural Evolution and Phase Transformation of O3-Type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 Cathode Material on Sintering and Cycling Processes

O-type layered oxide cathode materials can be easily synthesized for a full sodium stoichiometry with high specific capacity, but they all suffer from a capacity fade on cycling. The sintering process control and optimization are critical to ensure a high quality and consistency of the prepared cathode materials with stable structure. Herein, in situ high-energy X-ray diffraction (HEXRD) was first employed to investigate the phase evolution of the oxides during the sintering process of O3-type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 . The in situ HEXRD and both operando Bragg coherent diffraction (BCXD) and coherent multicrystal diffraction (CMCD) were utilized to investigate the phase transformation of the cathode materials during the sodiation/desodiation process. A composite structure comprised of O-type and P-type oxides was formed after the initial electrochemical activation of the cathode material, resulting in good structural and electrochemical stability. This finding implies that strain engineering can be a new design philosophy for the development of next generation high-performance sodium ion cathodes.

25 ENERGY STORAGE↗

Sintering Mechanism of Pt/Al 2 O 3 in Complex Emission Gases Elucidated via In Situ Environmental STEM

Emission control catalysts are crucial for protecting human health by preventing the release of harmful gases and unburnt fuel into the atmosphere. These catalysts often face deactivation through sintering processes in high-temperature, chemically reactive environments containing multiple gas species. Here, we use in situ environmental scanning transmission electron microscopy to monitor the sintering behavior and transient morphologies of Pt/Al 2 O 3 in various relevant gas environments through controlled experiments. Our results reveal the particle migration and atomic ripening behavior of Pt/Al 2 O 3 at the atomic scale in the presence of water vapor and oxygen, which differs from behaviors observed in single gas environments. We identify an atomic ripening mechanism involving the dissociation and migration of Pt adatom chains from Pt nanoparticles, observed only in combinational gases. Finally, these findings provide valuable insights into catalyst degradation behavior in complex gas environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing Sintering Kinetics of MoS 2 -Supported Metal Nanocatalysts in Atmospheric Gas Environments via Operando Transmission Electron Microscopy

The decoration of two-dimensional (2D) substrates with nanoparticles (NPs) serve as heterostructures for various catalysis applications. Deep understanding of catalyst degradation mechanisms during service conditions is crucial to improve the catalyst durability. In this work, we studied the sintering behavior of Pt and bimetallic Au-core Pt-shell (Au@Pt core–shell) NPs on MoS 2 supports at high temperatures under vacuum, nitrogen (N 2 ), hydrogen (H 2 ), and air environments by in situ gas-cell transmission electron microscopy (TEM). The key observations are summarized as effect of environment: while particle migration and coalescence (PMC) was the main mechanism that led to Pt and Au@Pt NPs degradation under vacuum, N 2 , and H 2 environments, the degradation of MoS 2 substrate was prominent under exposure to air at high temperatures. Pt NPs were less stable in H 2 environment when compared with the Pt NPs under vacuum or N 2 , due to Pt–H interactions that weakened the adhesion of Pt on MoS 2 . Effect of NP composition: under H 2 , the stability of Au@Pt NPs was higher in comparison to Pt NPs. This is because H 2 promotes the alloying of Pt–Au, thus reducing the number of Pt at the surface (reducing H 2 interactions) and increasing Pt atoms in contact with MoS 2 . Effect of NP size: The alloying effect promoted by H 2 was more pronounced in small size Au@Pt NPs resulting in their higher sintering resistance in comparison to large size Au@Pt NPs and similar size Pt NPs. The present work provides key insights into the parameters affecting the catalyst degradation mechanisms on 2D supports.

2D materials↗

Sintering and reactivity of CaCO{sub 3}-based sorbents for in situ CO{sub 2} capture in fluidized beds under realistic calcination conditions

Sintering during calcination/carbonation may introduce substantial economic penalties for a CO{sub 2} looping cycle using limestone/dolomite-derived sorbents. Cyclic carbonation and calcination reactions were investigated for CO{sub 2} capture under fluidized bed combustion (FBC) conditions. The cyclic carbonation characteristics of CaCO{sub 3}-derived sorbents were compared at various calcination temperatures (700-925{sup o} C) and different gas stream compositions: pure -2 and a realistic calciner environment where high concentrations of CO{sub 2}>80-90% are expected. The conditions during carbonation were 700 {sup o}C and 15% CO{sub 2} in N{sub 2} and 0.18% or 0.50% SO{sub 2} in selected tests. Up to 20 calcination/carbonation cycles were conducted using a thermogravimetric analyzer (TGA) apparatus. Three Canadian limestones were tested: Kelly Rock, Havelock, and Cadomin, using a prescreened particle size range of 400-650 {mu} m. Calcined Kelly Rock and Cadomin samples were hydrated by steam and examined. Sorbent reactivity was reduced whenever SO{sub 2} was introduced to either the calcining or carbonation streams. The multicyclic capture capacity of CaO for CO{sub 2} was substantially reduced at high concentrations of CO{sub 2} during the sorbent regeneration process and carbonation conversion of the Kelly Rock sample obtained after 20 cycles was only 10.5%. Hydrated sorbents performed better for CO{sub 2} capture but showed deterioration following calcination in high CO{sub 2} gas streams indicating that high CO{sub 2} and SO{sub 2} levels in the gas stream lead to lower CaO conversion because of enhanced sintering and irreversible formation of CaSO{sub 4}.

01 COAL, LIGNITE, AND PEAT↗

Effect of Sintering Temperature on the Synthesis of High Purity Cordierite

Cordierite is silicate material widely used in ceramic industry. The effect of sintering temperature to the properties of cordierite by sol gel method was studied with utilizing magnesium nitrate, aluminum nitrate, ethanol, and tetraethyl orthosilicate (TEOS) as starting materials. Gels are dried and sintered at different temperature (1000 deg. C, 1200 deg. C, 1300 deg. C and 1350 deg. C) then characterized by varies analysis techniques. XRD analysis shows that spinel, {mu}-cordierite and cristobalite are formed at 1000 deg. C which spinel as predominant phase. At 1200 deg. C, {mu}-cordierite occured as predominant phase, spinel, sapphirine and cristobalite are formed as minor phases. It also confirmed that high purity {alpha}-cordierite formed at 1300 deg. C and clearly observed at 1350 deg. C. Result of EDX analysis proved that magnesium, aluminum, silicon and oxygen was existed in the cordierite.

36 MATERIALS SCIENCE↗

End Uses Mechanical Properties Settled By The Modified Sintering Conditions Of The Metal Injection Molding Process

Most common mechanical applications require parts with specific properties as hard faced features. It is well known that treating parts under suitable atmospheres may improve hardness and strength yield of steels. Heat treatment process and more particularly thermo-chemical diffusion processes (such as carburizing or its variation: carbonitriding) can be performed to reach the industrial hardness profile requirements. In this work, a low-alloyed steel feedstock based on water soluble binder system is submitted to the MIM process steps (including injection molding, debinding and sintering). As-sintered parts are then treated under a low pressure carbonitriding treatment. This contribution focuses on preliminary results such as microstructural analyses and mechanical properties which are established at each stage of the process to determine and monitor changes.

36 MATERIALS SCIENCE↗

Electric Discharge Sintering and Joining of Tungsten Carbide--Cobalt Composite with High-Speed Steel Substrate

Simultaneous electro discharge sintering of high strength structure of tungsten carbide-cobalt composite and connection it with high-speed steel substrate is investigated and suitable operating parameters are defined. Tungsten carbide-cobalt and high-speed steel joining was produced by the method of high voltage electrical discharge together with application of mechanical pressure to powder compact. It was found that the density and hardness of composite material reach its maximum values at certain magnitudes of applied pressure and high voltage electrical discharge parameters. We show that there is an upper level for the discharge voltage beyond which the powder of composite material disintegrates like an exploding wire. Due to our results it is possible to determine optimal parameters for simultaneous electro discharge sintering of WC-Co and bonding it with high-speed steel substrate.

36 MATERIALS SCIENCE↗

Microstructure and magnetic properties of sintered Nd-Fe-B magnets with high hydrogen content

The effects of hydrogen contents after the process of hydrogen decrepitation on the magnetic properties and corrosion resistance of sintered Nd-Fe-B permanent magnets have been studied. The intrinsic coercivity of the magnets increases and the remanence decreases with increasing hydrogen content. High residue hydrogen content in the starting ingot leads to the reaction of hydrogenation, disproportionation, desorption and recombination in the sinter process resulting in magnets with low remanence. The results of highly accelerated temperature/humidity stress test indicate that excessive hydrogen contents are harmful to the corrosion resistance of the magnets. The influences of residue hydrogen contents on the corrosion resistance of magnets dominate only when the residue hydrogen content exceeds 1300 parts per million.

36 MATERIALS SCIENCE↗

Phase, Dielectric and Ferroelectric Properties of Microwave Sintered La and Ca Modified BaTiO{sub 3} Ceramics

Lanthanum and calcium modified barium titanate, Ba{sub (1-x)}La{sub x}Ti{sub (1-x/4)}O{sub 3}/BLT and Ba({sub 1-x})Ca{sub x}TiO{sub 3}/BCT, where x = 0.02, ferroelectric ceramic samples were synthesized in single perovskite phase by microwave processing technique. Sintering temperature was optimized at 1100 deg. C for 1h. Presence of pore free micron size uniform grains suggested the advantage of using microwave sintering process. Transition temperature (T{sub c}) decreases with the substitution of La content in BT system. Temperature coefficient of capacitance is negligible from RT temperature to 75 deg. C for BLT ceramic samples. Polarization vs. electric field (P-E) hysteresis loop study confirms the ferroelectric nature of the modified BT ceramic samples.

36 MATERIALS SCIENCE↗

Zn migration during spark plasma sintering of thermoelectric Zn{sub 4}Sb{sub 3}

The phase homogeneity of spark plasma sintered thermoelectric Zn{sub 4}Sb{sub 3} pellets along the pressing direction has been studied by potential Seebeck microprobe scanning and spatially resolved x-ray diffraction. Significant variations in the Seebeck coefficient reflect presence of different crystalline phases. The emergence of the ZnSb phase at the bottom of the pellet and metallic Zn impurity at the top explains the variation in the Seebeck coefficients. Quantitative phase distributions along the pressing axis were determined from the Rietveld refinements of spatially resolved x-ray diffraction patterns. These reveal a migration of highly mobilized Zn atoms under the direct current applied during spark plasma sintering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spark-plasma-sintering magnetic field assisted compaction of Co{sub 80}Ni{sub 20} nanowires for anisotropic ferromagnetic bulk materials

We developed a two-step process showing the way for sintering anisotropic nanostructured bulk ferromagnetic materials. A new reactor has been optimized allowing the synthesis of several grams per batch of nanopowders via a polyol soft chemistry route. The feasibility of the scale-up has been successfully demonstrated for Co{sub 80}Ni{sub 20} nanowires and a massic yield of ∼97% was obtained. The thus obtained nanowires show an average diameter of ∼6 nm and a length of ∼270 nm. A new bottom-up strategy allowed us to compact the powder into a bulk nanostructured system. We used a spark-plasma-sintering technique under uniaxial compression and low temperature assisted by a permanent magnetic field of 1 T. A macroscopic pellet of partially aligned nanowire arrays has been easily obtained. This showed optimized coercive properties along the direction of the magnetic field applied during compaction (i.e., the nanowires' direction)

36 MATERIALS SCIENCE↗

Grain size effect on the giant dielectric constant of CaCu{sub 3}Ti{sub 4}O{sub 12} nanoceramics prepared by mechanosynthesis and spark plasma sintering

In the present work, CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) nanoceramics with different grain sizes were prepared by spark plasma sintering (SPS) at different temperatures (SPS-800, SPS-900, SPS-975, and SPS-1050) of the mechanosynthesized nano-powder. Structural and microstructural properties were studied by XRD and field-emission scanning electron microscope measurements. The grain size of CCTO nanoceramics increases from 80 nm to ∼200 nm for the ceramics sintered at 800 °C and 975 °C, respectively. Further increase of SPS temperature to 1050 °C leads to micro-sized ceramics of 2–3 μm. The electrical and dielectric properties of the investigated ceramics were studied by impedance spectroscopy. Giant dielectric constant was observed in CCTO nanoceramics. The dielectric constant increases with increasing the grain size of the nanoceramics with values of 8.3 × 10{sup 3}, 2.4 × 10{sup 4}, and 3.2 × 10{sup 4} for SPS-800, SPS-900, and SPS-975, respectively. For the micro-sized SPS-1050 ceramics, the dielectric constant dropped to 2.14 × 10{sup 4}. The dielectric behavior is interpreted within the internal barrier layer capacitance picture due to the electrical inhomogeneity of the ceramics. Besides the resistive grain boundaries that are usually observed in CCTO ceramics, domain boundaries appear as a second source of internal layers in the current nanoceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of sintering on structural and dielectric properties of PLZT ferroelectrics

Here we report synthesis of (Pb{sub 0.93}La{sub 0.07}Zr{sub 0.6}Ti{sub 0.4}O{sub 3}) PLZT by chemical co-precipitation route. The precipitate obtained was subjected to different processing methods namely furnace sintering and hot press sintering. The product obtained was characterized using X-ray diffraction and dielectric measurements techniques. The dielectric properties obtained are correlated with the structural properties of PLZT.

36 MATERIALS SCIENCE↗

Dynamic compressive and tensile strengths of spark plasma sintered alumina

Fully dense submicron grain size alumina samples were manufactured from alumina nano-powder using Spark Plasma Sintering and tested in two kinds of VISAR-instrumented planar impact tests. In the first kind, samples were loaded by 1-mm tungsten impactors, accelerated to a velocity of about 1 km/s. These tests were aimed at studying the Hugoniot elastic limit (HEL) of Spark Plasma Sintering (SPS)-processed alumina and the decay, with propagation distance, of the elastic precursor wave. In the tests of the second kind, alumina samples of 3-mm thickness were loaded by 1-mm copper impactors accelerated to 100–1000 m/s. These tests were aimed at studying the dynamic tensile (spall) strength of the alumina specimens. The tensile fracture of the un-alloyed alumina shows a monotonic decline of the spall strength with the amplitude of the loading stress pulse. Analysis of the decay of the elastic precursor wave allowed determining the rate of the irreversible (inelastic) strains in the SPS-processed alumina at the initial stages of the shock-induced inelastic deformation and to clarify the mechanisms responsible for the deformation. The 1-% addition of Cr{sub 2}O{sub 3} decreases the HEL of the SPS-processed alumina by 5-% and its spall strength by 50% but barely affects its static properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-biased large magnetoelectric coupling in co-sintered Bi{sub 0.5}Na{sub 0.5}TiO{sub 3} based piezoelectric and CoFe{sub 2}O{sub 4} based magnetostrictive bilayered composite

In this work, magnetoelectric properties of a co-sintered bilayered composite of non-lead based piezoelectric 0.97(Bi{sub 0.5}Na{sub 0.5}TiO{sub 3})–0.03(K{sub 0.47}Na{sub 0.47}Li{sub 0.06}Nb{sub 0.74}Sb{sub 0.06}Ta{sub 0.2}O{sub 3}) and magnetostrictive Co{sub 0.6}Zn{sub 0.4}Fe{sub 1.7}Mn{sub 0.3}O{sub 4} are presented. Similar optimal sintering conditions of the individual components lead to a very clean interface as evidenced in the scanning electron microscopy, angle dispersive X-ray diffraction, and energy-dispersive X-ray (EDX) results. Clean interface results in strong intimate mechanical coupling between both components and causes a maximum transfer of induced strain, leading to a large magnetoelectric coupling ∼142 mV/cm·Oe measured in longitudinally magnetized-transversely polarized configuration (L-T mode). Remnant polarization ∼32 μC/cm{sup 2}, remnant magnetization ∼0.50 emu/g, and sufficiently high self biased magnetoelectricity ∼135 mV/cm Oe (L-T mode) were observed for this composite.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sintered tantalum carbide coatings on graphite substrates: Highly reliable protective coatings for bulk and epitaxial growth

Highly reliable low-cost protective coatings have been sought after for use in crucibles and susceptors for bulk and epitaxial film growth processes involving wide bandgap materials. Here, we propose a production technique for ultra-thick (50–200 μmt) tantalum carbide (TaC) protective coatings on graphite substrates, which consists of TaC slurry application and subsequent sintering processes, i.e., a wet ceramic process. Structural analysis of the sintered TaC layers indicated that they have a dense granular structure containing coarse grain with sizes of 10–50 μm. Furthermore, no cracks or pinholes penetrated through the layers, i.e., the TaC layers are highly reliable protective coatings. The analysis also indicated that no plastic deformation occurred during the production process, and the non-textured crystalline orientation of the TaC layers is the origin of their high reliability and durability. The TaC-coated graphite crucibles were tested in an aluminum nitride (AlN) sublimation growth process, which involves extremely corrosive conditions, and demonstrated their practical reliability and durability in the AlN growth process as a TaC-coated graphite. The application of the TaC-coated graphite materials to crucibles and susceptors for use in bulk AlN single crystal growth, bulk silicon carbide (SiC) single crystal growth, chemical vapor deposition of epitaxial SiC films, and metal-organic vapor phase epitaxy of group-III nitrides will lead to further improvements in crystal quality and reduced processing costs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗