Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Core Combination Method of Approximation (CCMA) for Neutron Fluence Calculation

Neutron fluence, or accumulative neutron fluence rate, is a key parameter of the neutron irradiation resistance of materials (Wagner, Bergner et al. 2016). So we must try to obtain it during irradiation experiments. Neutron fluence is defined as the time integral of neutron fluence rate. To get the quantity, or to do this integral, we need to know how neutron fluence rate varied with time. The integral might not be difficult when we conduct a material irradiation experiment, because we can put certain kind of neutron detectors in the location of species, to measure neutron fluence rate (Tanaka, Endo et al. 2011). At this circumstance, the reactor power is usually maintained to be constant (Ferroukhi, Hollard et al. 2009; Dupre, Vasiliev et al. 2015). So the neutron fluence is equal to the product of neutron fluence rate and irradiation time. However, it's not the same case when we want to get the neutron fluence of structure materials used in the SPRR- 300 (Swimming Pool Research Reactor -300). This reactor is a light-water-moderated, enriched-uranium-fueled research reactor developed by China. Structural materials, such as graphite, are of great value for research (Asamoah, Gyampo et al. 2012). Graphite was used as reflector in reactor. It is a waste of material and a waste of money to dismantle it simply. However, to reuse post-irradiation graphite assemblies faces some challenges, such as neutron fluence calculation, radiation protection, etc. The former will be discussed in this paper, whereas the latter will remain to be studied for the following time. The problem is how to acquire neutron fluence distribution in structure materials, since specific measurement of neutron fluence rate were not conducted intentionally during historical reactor operation. So we need to figure it out by a method of calculation. Considering a large number of reactor refueling, we propose an approximate method, Core Combination Method of Approximation (CCMA), to calculate accumulative neutron fluence rate of key structure materials during a long period of irradiation time.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Adjoint-based optimization of mechanical performance in polycrystalline materials and structures through texture control

The texture of a polycrystalline material refers to the preferred orientation of the grains within the material. In metallic materials, texture can significantly affect the mechanical properties such as elastic moduli, yield stress, strain hardening, and fracture toughness. Recent advances in additive manufacturing of metallic materials offer the possibility in the not too distant future of controlling the spatial variation of texture. In this work, we investigate the advantages, in terms of mechanical performance, of allowing the texture to vary spatially. We use an adjoint-based gradient optimization algorithm within a finite element solver (COMSOL) to optimize several engineering quantities of interest in a simple structure (hole in a plate) and loading (uniaxial tension) condition. As a first step to general texture optimization, we consider the idealized case of a pure fiber texture in which the homogenized properties are transversely isotropic. In this special case, the only spatially varying design variables are the three Euler angles that prescribe the orientation of the homogenized material at each point within the structure. This work paves a new way to design metallic materials for tunable mechanical properties at the microstructure level.

36 MATERIALS SCIENCE↗

Structures and mechanisms

Structures, materials, and mechanisms is one of the older technologies in the aerospace business. The Structures, Materials, and Mechanisms Panel was divided into the four basic categories that fit the overall responsibilities of the panel: materials, mechanisms, structural design, and analysis.

Purdy, D.↗

Z4B, AREVA NP's most recent material for structural fuel assembly components

Z4B is AREVA NP's advanced material for fuel channels and BWR fuel assembly structural components such as water channels, which are made of zirconium base material. As such, Z4B is envisaged to replace Zircaloy-2 and Zircaloy-4 as a fuel channel and water channel material. The chemical composition of Z4B is similar to that of Zircaloy-4 with the exception of an increased iron and chromium content slightly above the ASTM specification. The manufacturing processes applied to produce Z4B components are the same as those that have been applied for Zircaloy-2 and Zircaloy-4 materials. AREVA NP has irradiated a total of 74 lead fuel channels made of Z4B either in beta-quenched condition or in fully recrystallized condition in eight BWRs worldwide. Sixty-six of these are still in service with 26 of these lead fuel channels on fuel assemblies of various ATRIUM 10 designs and 40 on ATRIUM 11 lead fuel assemblies. In addition to Z4B fuel channels, the ATRIUM 11 design also features fully recrystallized water channels. The first ATRIUM 11 lead fuel assemblies were inserted in-core in 2012. The first Z4B beta-quenched lead fuel channels were inserted in 2009 and will reach an estimated burnup of 60 MWd/kgHM in 2016 after seven annual cycles of irradiation. The first Z4B fully recrystallized lead fuel channels were also inserted in 2009 and have been discharged with EOL burnups of about 47 MWd/kgHM after three biennial cycles of irradiation. Pool-side inspections of these leads have confirmed the superior uniform and shadow corrosion behavior of Z4B fuel channels relative to Zircaloy-4 fuel channels. This increased corrosion resistance combined with a similar hydrogen pickup fraction to Zircaloy-4 will lead to an overall decrease in total hydrogen content and minimize the potential of hydrogen assisted irradiation growth and abnormal bow of fuel channels in the recrystallized condition. The use of Z4B fuel channels in the beta-quenched condition decreases bow even further due to the resulting quasi-isotropic microstructure. Additionally, fuel channels made of Z4B tend to exhibit reduced bulge, which is valid in both conditions, beta-quenched and recrystallized.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Status Report on Improved Understanding of Creep‐fatigue Damage in Advanced Materials

This report provides an update on the materials performance criteria and methodology relevant to liquid metal reactors (LMRs), in particular, sodium cooled fast reactors. The report is the first deliverable (Level 3) in FY11 (M3A11AN04030303) under the work package A-11AN040303 “Materials Performance Criteria and Methodology” as part of Advanced Structural Materials Program for the Advanced Reactor Concepts. The overall objective of the Advanced Materials Performance Criteria and Methodology project is to evaluate the key requirements for the ASME Code qualification and the Nuclear Regulatory Commission (NRC) approval of advanced structural materials in support of the design and licensing of the liquid metal fast reactors. Advanced materials are a critical element in the development of fast reactor technologies. Enhanced materials performance not only improves safety margins and provides design flexibility but also is essential for the economics of future advanced fast reactors. Qualification and licensing of advanced materials are prominent needs for the development and implementation of advanced fast reactor technologies. Nuclear structural component designs in the U.S. comply with the ASME Boiler and Pressure Vessel (B&PV) Code Section III (Rules for Construction of Nuclear Facility Components) and the NRC grants licensing. As the LMR will operate at higher temperatures than the current light water reactors (LWRs), the design of elevated-temperature components must comply with ASME Section III Subsection NH (Class 1 Components in Elevated Temperature Service). A number of technical issues relevant to materials performance criteria and high temperature design methodology in the LMR were identified and presented in earlier reports [Natesan et al. 2008, 2009]. A viable approach to resolve these issues and the R&D priority were also recommended. The development of mechanistically based creep-fatigue interaction models for life prediction and reliable data extrapolation was chosen to be the central focus in near-term efforts. Our current efforts focus on the creep-fatigue damage issue in high-strength ferritic-martensitic steels for two primary reasons. First, the current ASME design rule of bilinear damage summation puts severe limits of fatigue and creep loads for mod.9Cr-1Mo (G91) ferritic-martensitic steel, the lead structural material for fast reactors; secondly, the ferritic-martensitic steels behave fundamentally differently from austenitic stainless steels, for which the current ASME creep-fatigue design rules were developed. The unique deformation and damage characteristics in G91 steel, e.g. cyclic softening, degradation of creep and rupture strength during cyclic service, demands a new creep-fatigue design procedure that explicitly accounts for the material’s unique creep-fatigue behavior. To support the development of predictive models and to resolve the over-conservative issue with the ASME design rule for G91 steel, we recovered stress relaxation data from thirteen creep-fatigue tests conducted at Oak Ridge National Laboratory in late 1980s and early 1990s, and conducted extensive data analysis. Based on this limited database and available literature data, we have developed a Cyclic Softening Model and a Stress Relaxation Model specifically applied to G91 steel. The Cyclic Softening Model incorporates strain hardening and creep deformation, and predicts the cyclic stress variation as a function of cycle number during creep-fatigue loading. The Stress Relaxation Model predicts the stress relaxation curve during the hold time of cyclic loading, based on the creep properties of the material. By incorporating the newly developed Cyclic Softening Model and Stress Relaxation Model with the Bilinear Damage Model, we have evaluated the creep-fatigue damage in G91 steel using experimental data without any safety margins. The analysis provided a more realistic assessment of creep-fatigue damage and identified critical factors that need to be considered in future advanced models. We have found that due to the significant cyclic softening in G91 steel, the unit creep damage in each cycle decreased continuously with increasing number of cycles. This continuous change in creep damage with cycling has significant implication in the evaluation of the total creep-fatigue damage. The total creep damage can be one order of magnitude lower when the unit creep damage at half-life was used in the evaluation in comparison with the calculations using the unit creep damage at cycle 10. An important conclusion is the accurate assessment of the creep-fatigue damage in G91 steel must consider the cycling history. Future work will refine the Cyclic Softening Model and Stress Relaxation Model and integrate these two models with the Damage Rate Model for life prediction under creep-fatigue loading. An accelerated creep-fatigue testing methodology is proposed for the design of model-oriented experiments to guide and validate model development. Key material parameters in the model will be determined by creep and fatigue data, obtained under symmetric continuous cycling (fast-fast and slow-slow) and asymmetric cycling (slow-fast and fast-slow) which often lead to accelerated creep-fatigue damage. The established model, based on creep and fatigue properties, will then be used to predict the life under creep-fatigue loading with hold-time in either tension or compression or combined tension and compression. With the success of this mechanistically based life prediction model for G91 steel, the model will be extended to advanced ferritic-martensitic steels, such as NF616.

Li, Meimei↗

Progressive failure analysis of fibrous composite materials and structures

A brief description is given of the modifications implemented in the PAFAC finite element program for the simulation of progressive failure in fibrous composite materials and structures. Details of the memory allocation, input data, and the new subroutines are given. Also, built-in failure criteria for homogeneous and fibrous composite materials are described.

Bahei-El-din, Yehia A.↗

Experimental measurement of passive material and structural damping for flexible space structures

Among the design objectives for large space structures are the maintenance of tight dimensional tolerance and the reduction of settling time after disturbance input. Two options are under consideration for the design of flexible structures to meet these objectives, including an active control option and a passive control option. In connection with both options, it is necessary to include material and structural damping in the design. A description is presented of the results of an experimental investigation of the damping of metallic and fibrous composite materials, taking into account also the analytical modeling and experimental verification of frictional damping schemes. To demonstrate how material and frictional damping can be combined, a simple structural optimization is performed, indicating the potential for significant savings in mass by the addition of frictional dampers.

Crawley, E. F.↗

The Li{sub y}Ni{sub 0.2}Mn{sub 0.2}Co{sub 0.6}O{sub 2} electrode materials: A structural and magnetic study

Graphical abstract: EPR signal of the Li{sub 0.6}Co{sub 0.6}Ni{sub 0.2}Mn{sub 0.2}O{sub 2} composition showing that Mn{sup 4+} ions are the solely paramagnetic ions in the structure. Highlights: Black-Right-Pointing-Pointer LiCo{sub 0.6}Ni{sub 0.2}Mn{sub 0.2}O{sub 2} was prepared by the combustion method with sucrose as a fuel. Black-Right-Pointing-Pointer Chemical delithiaition was performed by using NO{sub 2}BF{sub 4} oxidizing agent. Black-Right-Pointing-Pointer The rhombohedral symmetry was preserved upon lithium removal. Black-Right-Pointing-Pointer Lithium extraction leads to Ni{sup 2+} oxidation to Ni{sup 4+} followed by Co{sup 3+} oxidation. Black-Right-Pointing-Pointer The EPR narrow signal of Li{sub 0.6}Co{sub 0.6}Ni{sub 0.2}Mn{sub 0.2}O{sub 2} is due to the only active Mn{sup 4+} ions. -- Abstract: Layered LiNi{sub 0.2}Mn{sub 0.2}Co{sub 0.6}O{sub 2} phase, belonging to a solid solution between LiNi{sub 1/2}Mn{sub 1/2}O{sub 2} and LiCoO{sub 2} most commercialized cathodes, was prepared via the combustion method at 900 Degree-Sign C for a short time (1 h). Structural and magnetic properties of this material during chemical extraction were investigated. The powders adopted the {alpha}-NaFeO{sub 2} structure with almost none of the well-known Li/Ni cation disorder. The analysis of the magnetic properties in the paramagnetic domain agrees with the combination of Ni{sup 2+} (S = 1), Co{sup 3+} (S = 0) and Mn{sup 4+} (S = 3/2) spin-only values. X-ray analysis of the chemically delithiated Li{sub y}Ni{sub 0.2}Mn{sub 0.2}Co{sub 0.6}O{sub 2} reveals no structural transition. The process of lithium extraction from and insertion into LiNi{sub 0.2}Mn{sub 0.2}Co{sub 0.6}O{sub 2} was discussed on the basis of ex situ EPR experiments and magnetic susceptibility. Oxidation of Ni{sup 2+} (S = 1) to Ni{sup 3+} (S = 1/2) and to Ni{sup 4+} (S = 0) was observed upon lithium removal.

36 MATERIALS SCIENCE↗

Materials and structural aspects of advanced gas-turbine helicopter engines

Advances in materials, coatings, turbine cooling technology, structural and design concepts, and component-life prediction of helicopter gas-turbine-engine components are presented. Stationary parts including the inlet particle separator, the front frame, rotor tip seals, vanes and combustors and rotating components - compressor blades, disks, and turbine blades - are discussed. Advanced composite materials are considered for the front frame and compressor blades, prealloyed powder superalloys will increase strength and reduce costs of disks, the oxide dispersion strengthened alloys will have 100C higher use temperature in combustors and vanes than conventional superalloys, ceramics will provide the highest use temperature of 1400C for stator vanes and 1370C for turbine blades, and directionally solidified eutectics will afford up to 50C temperature advantage at turbine blade operating conditions. Coatings for surface protection at higher surface temperatures and design trends in turbine cooling technology are discussed. New analytical methods of life prediction such as strain gage partitioning for high temperature prediction, fatigue life, computerized prediction of oxidation resistance, and advanced techniques for estimating coating life are described.

Freche, J. C.↗

Effect of transition metal composition on electrochemical performance of nickel-manganese-based lithium-rich layer-structured cathode materials in lithium-ion batteries

To evaluate the effect of transition metal composition on the electrochemical properties of Li-rich layer-structured cathode materials, Li{sub 1.2}Ni{sub x}Mn{sub 0.8−x}O{sub 2} (x=0.2, 0.25, 0.3, and 0.4) were synthesized, and their electrochemical properties were investigated. As nickel content x increased in Li{sub 1.2}Ni{sub x}Mn{sub 0.8−x}O{sub 2} (x=0.2, 0.25, 0.3, and 0.4), charge-discharge capacities at a low C-rate (0.05 C) decreased. The results obtained by dQ/dV curves indicate that, as the nickel content increased, the discharge capacity below 3.6 V greatly decreased, but that above 3.6 V increased. As the C-rate of the discharge process increased, the discharge reaction of Li{sub 1.2}Ni{sub x}Mn{sub 0.8−x}O{sub 2} (x=0.2) below 3.6 V greatly decreased. In contrast, that above 3.6 V slightly decreased. This indicates that the discharge reaction above 3.6 V exhibits higher rate performance than that below 3.6 V. For the high-nickel-content cathodes, the ratio of the discharge capacity above 3.6 V to the total discharge capacity was high. Therefore, they exhibited high rate performance. - Graphical abstract: Figure shows the discharge curves of Li{sub 1.2}Ni{sub x}Mn{sub 0.8−x}O{sub 2} (x=0.2 and 0.3) within potential range of 2.5−4.6 V (vs. Li/Li{sup +}) at 0.05 and 3 C. At low C-rate (0.05 C), the discharge capacity of high-nickel-content cathode (Li{sub 1.2}Ni{sub 0.3}Mn{sub 0.5}O{sub 2}) was less than that of low-nickel-content cathode (Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2}); however, the discharge potential and capacity of Li{sub 1.2}Ni{sub 0.3}Mn{sub 0.5}O{sub 2} was higher than those of Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} at high C-rate (3 C). This means that the increase in Ni/Mn ratio was effective in improving rate-performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The equilibrium and preequilibrium neutron-emission spectra of some structural fusion materials for (n, xn) reactions up to 16 MeV energy

In this study, neutron-emission spectra produced by (n, xn) reactions for some structural fusion materials as {sup 27}Al, {sup 51}V, {sup 52}Cr, {sup 55}Mn, and {sup 56}Fe have been investigated by a neutron beam up to 16 MeV. Multiple preequilibrium mean-free-path constant from internal transition and the preequilibrium and equilibrium level-density parameters have been investigated for some (n, xn) neutron-emission spectra calculated in this study. Preequilibrium neutron-emission spectra were calculated by using new-evaluated hybrid model and geometry-dependent hybrid model, full-exciton model, and cascade-exciton model. The reaction equilibrium component was calculated by Weisskopf-Ewing model. The obtained results have been discussed and compared with the available experimental data and found agreement with each other.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A review: applications of the phase field method in predicting microstructure and property evolution of irradiated nuclear materials

Here, complex microstructure changes occur in nuclear fuel and structural materials due to the extreme environments of intense irradiation and high temperature. This paper evaluates the role of the phase field method in predicting the microstructure evolution of irradiated nuclear materials and the impact on their mechanical, thermal, and magnetic properties. The paper starts with an overview of the important physical mechanisms of defect evolution and the significant gaps in simulating microstructure evolution in irradiated nuclear materials. Then, the phase field method is introduced as a powerful and predictive tool and its applications to microstructure and property evolution in irradiated nuclear materials are reviewed. The review shows that (1) Phase field models can correctly describe important phenomena such as spatial-dependent generation, migration, and recombination of defects, radiation-induced dissolution, the Soret effect, strong interfacial energy anisotropy, and elastic interaction; (2) The phase field method can qualitatively and quantitatively simulate two-dimensional and three-dimensional microstructure evolution, including radiation-induced segregation, second phase nucleation, void migration, void and gas bubble superlattice formation, interstitial loop evolution, hydrate formation, and grain growth, and (3) The Phase field method correctly predicts the relationships between microstructures and properties. The final section is dedicated to a discussion of the strengths and limitations of the phase field method, as applied to irradiation effects in nuclear materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Education for sustainable use of cement based materials

Structural design and application have always been linked to the compressive strength of concrete as the main relevant criterion. This was justifiable in the past, where concrete consisted of water, ordinary Portland cement and aggregates, but this concept is no longer relevant for modern and more sustainable cement and concrete. Despite these new developments, existing standards, guidelines and academic curricula have not been much updated and are still used worldwide. There is a need to change this situation by proper education of the users. }This overview describes the challenges that arise at a user level from the higher complexity of modern concrete, and defines needs and requirements for enhanced applicability of sustainable concrete concepts. Furthermore, recommendations are given on how better concrete practice can be communicated to all the involved parties, from civil and design engineers to constructors and site-appliers on the construction site.

36 MATERIALS SCIENCE↗

Improved Creep-­Fatigue Models on Advanced Materials for SFR Applications (Final Report)

This report provides an update on the materials performance criteria and methodology relevant to sodium-cooled fast reactors (SFRs). The report is the second deliverable (Level 2) in FY11 (M2A11AN040303) under the work package A-11AN040303 “Materials Performance Criteria and Methodology” as part of the Advanced Structural Materials Program for the Advanced Reactor Concepts. The overall objective of the Materials Performance Criteria and Methodology work project is to evaluate the key requirements for the ASME Code qualification and the Nuclear Regulatory Commission (NRC) approval of advanced structural materials in support of the design and performance of sodium-cooled fast reactors. Advanced materials are a critical element in the development of fast reactor technologies. Enhanced materials performance not only improves safety margins and provides design flexibility, but also is essential for the economics of future advanced fast reactors. Qualification and licensing of advanced materials are prominent needs for the development and implementation of advanced fast reactor technologies. Nuclear structural component designs in the U.S. comply with the ASME Boiler and Pressure Vessel (B&PV) Code Section III (Rules for Construction of Nuclear Facility Components), and the NRC grants licensing. As the SFRs will operate at higher temperatures than the current light water reactors (LWRs), the design of elevated-temperature components must comply with ASME Section III Subsection NH (Class 1 Components in Elevated Temperature Service). A number of technical issues relevant to materials performance criteria and high temperature design methodology in the SFR were identified and presented in earlier reports. A viable approach to resolve these issues and the R&D priority were also recommended. The development of mechanistically based creep-fatigue interaction models for life prediction and reliable data extrapolation was chosen to be the central focus in near-term efforts. Our current focus is on the creep-fatigue damage issue in high-strength ferritic/martensitic steels such as mod.9Cr-1Mo (G91) and NF616 (G92) steels. The current ASME creep-fatigue design rule puts severe limits of fatigue and creep loads for G91 steel, the lead structural material for fast reactors. High-strength ferritic/martensitic steels behave fundamentally differently from austenitic stainless steels, for which the current ASME creep-fatigue design rules were developed. The unique deformation and damage characteristics in G91 steel, e.g. cyclic softening, degradation of creep and rupture strength during cyclic service, demands a new creep-fatigue design procedure that explicitly accounts for the material’s unique creep-fatigue behavior. G92 steel, a variant of G91 steel, is the lead candidate in the Advanced Alloy Development program. There is currently no creep-fatigue design rule available for this advanced alloy. To support the predictive model development and resolve the over-conservative issue with the ASME design rule for G91 steel, we recovered stress relaxation data from thirteen creep-fatigue tests conducted in the late 1980s and early 1990s at Oak Ridge National Laboratory, and conducted extensive data analysis in FY10. Based on this database and available literature data, we have developed a Cyclic Softening Model and a Stress Relaxation Model specifically applied to G91 steel. The Cyclic Softening Model describes the cyclic stress variation as a function of cycle number during creep-fatigue loading, and well captures the cyclic softening effect in G91 steel. The Stress Relaxation Model predicts the stress relaxation curve during the hold time of cyclic loading, and its dependence on the cyclic softening effect of G91 steel. Two creep-fatigue test systems have been set up to conduct model-oriented creep-fatigue experiments. Results from three creep-fatigue experiments on Heat 30176 of G91 steel are presented in the report: (1) a test performed at 550°C with total strain amplitude of 0.25% and a hold time of 60 s applied at peak strains in both tension and compression, (2) a test performed at 400°C with total strain amplitude of 0.5% and a tension and compression hold time of 60 s, and (3) a test performed at 20°C with total strain amplitude of 0.5% and a tension and compression hold time of 60 s. Three different test temperatures were chosen for two primary reasons: to determine the transition temperature of creep-fatigue interaction from a plasticity-dominated process to a creep-dominated process; to develop unified creep-fatigue models applicable for a wide range of temperatures. With the detailed information obtained in the creep-fatigue experiments, we have further refined the Cyclic Softening Model and Stress Relaxation Model. The Cyclic Softening Model and Stress Relaxation Model were incorporated into the Bilinear Creep-Fatigue Damage Model, forming a powerful framework for the life prediction by an improved creep-fatigue evaluation methodology. The cyclic softening and consecutive stress relaxation responses in G91 steel can be considered for each cycle of the entire cyclic process in the model calculation. The creep-fatigue damage in G91 steel was evaluated using the improved Bilinear Creep-Fatigue Damage Model without any safety margins. It was found that due to the significant cyclic softening in G91 steel, the unit creep damage in each cycle decreased continuously with increasing number of cycles. This continuous change in creep damage with cycling has significant implication in the evaluation of the total creep-fatigue damage. The total creep damage can be one order of magnitude lower when the unit creep damage at half-life was used in the evaluation in comparison with the calculations using the unit creep damage at cycle 10. An important conclusion was that the accurate assessment of the creep-fatigue damage in G91 steel must consider the history of cycling. This analysis provides a more realistic assessment of creep-fatigue damage and identifies critical factors that must be considered in the development of future advanced models for high-strength ferritic/martensitic alloys. An accelerated creep-fatigue testing methodology is proposed for the design of model-oriented experiments to guide and validate model developments. Future work will focus on creep-fatigue experiments of both G91 and G92 steels, and development of creep-fatigue models applicable to advanced ferritic/martensitic alloys. The Cyclic Softening Model and Stress Relaxation Model will be improved by incorporating microstructural parameters of dislocation density, subgrain structure, and second-phase particles. Collaborative modeling of combined Cyclic Softening Model, Stress Relaxation Model, and Interactive Damage Rate Model will be pursued for life prediction under creep-fatigue loading with extended hold time. Accelerated, well-controlled creep-fatigue tests will be conducted to provide high-quality experimental data to refine key material parameters and validate models.

Li, Meimei↗