Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

High Performance GaAs Solar Cells Grown at High Growth Rates by Atmospheric-Pressure Dynamic Hydride Vapor Phase Epitaxy

We report GaAs solar cells grown at rates exceeding 300 um/h by atmospheric-pressure dynamic hydride vapor phase epitaxy (D-HVPE). The surface morphology of the GaAs layers grown at those rates is smooth, with root mean square surface roughness of < 1.4 nm. We grew GaAs solar cells at rates from 35 - 309 um/h with negligible degradation in open circuit voltages (VOC), which ranged from 1.04 - 1.07 V. We showed the slight decrease in VOC is due to lack of doping optimization at higher growth rates. Deep level transient spectroscopy measurements showed low point defect densities that increases slightly with growth rate from 35 - 309 um/h. The low point defect concentrations and the high VOCs indicate that high material quality can be maintained at these extremely high growth rates, enabling the deposition of high efficiency cells in mere seconds instead of hours.

14 SOLAR ENERGY↗

Method for improving performance of high temperature superconductors within a magnetic field

The present invention provides articles including a base substrate including a layer of an oriented cubic oxide material having a rock-salt-like structure layer thereon; and, a buffer layer upon the oriented cubic oxide material having a rock-salt-like structure layer, the buffer layer having an outwardly facing surface with a surface morphology including particulate outgrowths of from 10 nm to 500 run in size at the surface, such particulate outgrowths serving as flux pinning centers whereby the article maintains higher performance within magnetic fields than similar articles without the necessary density of such outgrowths.

Wang, Haiyan↗

In Adsorption on Si(112) and its Impact on Ge Growth

The change of the Si(112) surface morphology and structure induced by In adsorption, as well as the impact of In preadsorption on the growth kinetics and island morphology in Ge/Si(112) epitaxy, has been investigated by means of low-energy electron microscopy and diffraction. The intrinsically faceted Si(112) surface is smoothed upon In saturation. In contrast to a previously reported (7 x 1) reconstruction (reported in a recent work of Gai et al.), we observe a [(3 + x) x 1] superstructure, with {approx} 1/2. This is attributed to the coexistence of (3 x 1) and (4 x 1) building blocks with In vacancies. The presence of such vacancy rows is confirmed by the saturation of the [(3 + x) x 1] structure at about 0.8 monolayers. Ge growth on In-saturated Si(112) leads to the formation of 3-D islands, the morphology of which depends on the growth temperature. At 450 C, isotropic and dashlike islands are observed, whereas at 500 C, larger islands with a triangular outline are found. The orientation of the side facets of these triangular islands have been identified to be (111), (013), and (103). The dependence of the island density on the growth temperature indicates an enhanced Ge surface diffusion, as compared with growth on bare Si(112).

36 MATERIALS SCIENCE↗

Rapid synthesis of spherical-shaped green-emitting MgGa{sub 2}O{sub 4}:Mn{sup 2+} phosphor via spray pyrolysis

Simple, one-step synthesis of spherical-shaped powder phosphors with aqueous precursors via a spray pyrolysis method is reported. Green-emitting MgGa{sub 2}O{sub 4}:Mn{sup 2+} phosphor with a controlled shape was successfully obtained by spraying under a reductive atmosphere (N{sub 2} + H{sub 2} carrier gas) without high-temperature post-heat treatment. In addition, the corresponding powder phosphors were well dispersed and showed a clean surface morphology compared to an existing cumbersome process using high-temperature post-annealing. The new method may help to prevent surface residual non-radiative defect sites. The result of highly luminescent and spherical morphology, non-aggregated powder phosphor by this procedure holds promise for a cost-effective and rapid synthesis process for conventional inorganic phosphors.

36 MATERIALS SCIENCE↗

Raman characterization of boron doped tetrahedral amorphous carbon films

Boron doped tetrahedral amorphous carbon films, having boron content from 0.59 to 6.04 at.%, have been prepared by a filtered cathodic vacuum arc system using boron mixed graphite targets. The influence of boron on the surface morphologies and microstructures of the films was studied by atomic force microscopy and Raman spectroscopy. The surface images showed that the irregular tops on the surface of the films tended to form larger clusters as boron content increased. The Raman spectra of the films were, respectively, deconvoluted using Gaussian and Breit-Wigner-Fano line shapes. The Raman parameters, including the intensity ratios, peak positions, peak widths and coupling coefficients, obtained from both line shapes were described and compared. It was found that both line shapes could produce consistent results except the peak widths of G bands. The major effect of boron introduction was to increase the clustering of the sp{sup 2} phase in the films.

36 MATERIALS SCIENCE↗

Impact of the non-planar morphology of pre-patterned substrates on the structural and electronic properties of embedded site-controlled InAs quantum dots

We present an experimental and theoretical analysis of the influence of a surface nanopattern on the properties of embedded InAs/GaAs quantum dots (QD). In particular, we analyze QDs grown on nanoimprint lithography (NIL) patterned grooves and investigate the influence of the non-planar surface morphology on the size, shape, strain distribution, and electronic structure of the embedded QDs. We show that the height reduction of InAs QDs during GaAs capping is significantly less pronounced for the QDs grown on the pattern than for the self-assembled QDs. Furthermore, the pattern has a strong impact on the strain and composition profile within the QD. The experimentally observed strain distribution was successfully reproduced with a three-dimensional model assuming an inverse-cone type composition gradient. Moreover, we show that the specific morphology of the QDs grown in the grooves gives rise to an increase of the vertically polarized photoluminescence emission which was explained by employing 8-band k.p calculations. Our findings emphasize that the surface curvature of the pattern not only determines the nucleation sites of the QDs but also has a strong impact on their morphological properties including shape, size, composition profile, and strain distribution. These properties are strongly cross-correlated and determine the electronic and optical characteristics of the QDs.

36 MATERIALS SCIENCE↗

Improvement of the wear resistance of electroplated Au-Ni coatings by Zr ion bombardment of Ni-B sublayer

The effect of bombardment of the Ni-B sublayer by Zr ion beams on the surface morphology and tribomechanical properties of Au-Ni coatings was investigated. It was found that the treatment has no significant effect on the surface roughness and grain size of the Au-Ni coatings, while it provides essential reducing of their friction coefficient and improvement of wear resistance. It is shown that increased wear resistance of these coatings was caused by their strain hardening resulted from localization of plastic strain. The optimal Zr fluence were determined that provide the maximum reduction of linear wear of the coatings.

36 MATERIALS SCIENCE↗

Development of Broadband Microwave Absorber and Measurement of Its Magnetic and Microwave Properties

Toroid shape Co-doped barium hexaferrites of composition (BaFe{sub 11}CoO{sub 19}) are prepared by standard sintering technology as a sample. In this work, XRD is used to identify the structure of synthesized sample. Vibrating sample magnetometer is used to obtain magnetic hysteresis loop of sample. Scanning electron microscope is used for surface morphology of sample. The complex permeability and permittivity are measured with commercial automation measurement set up in the 2–18 GHz frequency range. As a result of measurement, the calculation of reflection loss of the synthesized samples has been carried out. Investigation of microwave absorption properties revealed that the maximum reflection loss of Co-doped barium hexaferrite sample is around −20 dB and almost flat in the measurement frequency band. From these results, it was concluded that Co-doped barium hexaferrites of composition had a good potential as microwave absorber in the broadband frequency range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Composite plasma polymerized sulfonated polystyrene membrane for PEMFC

Highlights: • Methyl methane sulfonate (MMS) is used as the sulfonating agent. • The proton conductivity of the membrane is found to be 0.141 S cm{sup −1}. • Power density of fuel cell with styrene/MMS membrane is 0.5 W cm{sup −2}. • The membrane exhibits thermal stability up to 140 °C. - Abstract: This work presents the introduction of an organic compound methyl methane sulfonate (MMS) for the first time in fabrication of polystyrene based proton exchange membrane (PEM) by plasma polymerization process. The membrane is fabricated by co-polymerizing styrene and MMS in capacitively coupled continuous RF plasma. The chemical composition of the plasma polymerized polymer membrane is investigated using Fourier Transform Infrared Spectroscopy which reveals the formation of composite structure of styrene and MMS. The surface morphology studied using AFM and SEM depicts the effect of higher partial pressure of MMS on surface topography of the membrane. The proton transport property of the membrane studied using electrochemical impedance spectroscopy shows the achievement of maximum proton conductivity of 0.141 S cm{sup −1} which is comparable to Nafion 117 membrane. Fuel cell performance test of the synthesized membrane shows a maximum power density of 500 mW cm{sup −2} and current density of 0.62 A cm{sup −2} at 0.6 V.

36 MATERIALS SCIENCE↗

Dual roles of stepped surfaces: Catalytic initiators and stabilizers of oxygen-induced reconstructions

Understanding surface restructuring under reactive conditions is crucial for designing next-generation catalysts with enhanced activity and selectivity. Here, we employ in situ transmission electron microscopy to directly observe the dynamic behavior of Cu(100) and Cu(410) surfaces under both oxidizing and vacuum annealing conditions, revealing a complex interplay among surface crystallography, local oxygen coverage, Cu atom mobility, and step-edge reactivity. The stepped Cu(410) surface acts as an active site for O 2 dissociation, triggering the oscillatory transformation of the c(2 × 2)–O phase into the more stable (2$\sqrt2$ ×$\sqrt2$)R45°–O missing-row (MR) structure on the adjacent flat Cu(100) terrace. Under subsequent vacuum annealing, this same Cu(410) facet exhibits remarkable structural resilience, preserving the MR reconstruction and chemisorbed oxygen. In contrast, the Cu(100) surface undergoes reversible transitions from the MR structure back to the c(2 × 2)–O phase. These results highlight the critical role of surface morphology in directing both the formation and stability of oxygen-induced reconstructions, demonstrating that stepped surfaces serve dual roles as both catalytic initiators and structural stabilizers. Furthermore, this work offers atomic-level insights into the environment-responsive behavior of copper surfaces, establishing a mechanistic basis for designing Cu-based catalysts through facet-specific control of surface reactivity.

36 MATERIALS SCIENCE↗

Saturation effects in femtosecond laser ablation of silicon-on-insulator

We report a surface morphology study on single-shot submicron features fabricated on silicon on insulator by tightly focused femtosecond laser pulses. In the regime just below single-shot ablation threshold nano-tips are formed, whereas in the regime just above single-shot ablation threshold, a saturation in the ablation depth is found. We attribute this saturation by secondary laser absorption in the laser-induced plasma. In this regime, we find excellent agreement between the measured depths and a simple numerical model. When the laser fluence is further increased, a sharp increase in ablation depth is observed accompanied by a roughening of the ablated hole.

36 MATERIALS SCIENCE↗

Synergistic etch rates during low-energetic plasma etching of hydrogenated amorphous carbon

The etch mechanisms of hydrogenated amorphous carbon thin films in low-energetic (<2 eV) high flux plasmas are investigated with spectroscopic ellipsometry. The results indicate a synergistic effect for the etch rate between argon ions and atomic hydrogen, even at these extremely low kinetic energies. Ion-assisted chemical sputtering is the primary etch mechanism in both Ar/H{sub 2} and pure H{sub 2} plasmas, although a contribution of swift chemical sputtering to the total etch rate is not excluded. Furthermore, ions determine to a large extent the surface morphology during plasma etching. A high influx of ions enhances the etch rate and limits the surface roughness, whereas a low ion flux promotes graphitization and leads to a large surface roughness (up to 60 nm).

36 MATERIALS SCIENCE↗

Study of polyvinyl alcohol nanofibrous membrane by electrospinning as a magnetic nanoparticle delivery approach

Electrospinning technique was used to fabricate polyvinyl alcohol (PVA)-based magnetic biodegradable nanofibers. PVA solution was mixed with ferrofluid or magnetic nanoparticles (MNPs) powder and formed two individual nanofibrous membranes (PVA/ferrofluid and PVA/MNPs powder) by electrospinning. The surface morphology of the nanofibrous membrane was characterized by scanning electron microscopy and the magnetic properties were measured by vibrating sample magnetometer. Macrophages (RAW 264.7) were co-cultured with the nanofibrous membranes for 12, 24, and 48 h and exhibited good cell viability (>95%). Results showed that the PVA fibers would be degraded and the embedded Fe{sub 3}O{sub 4} nanoparticles would be released and delivered to cells.

60 APPLIED LIFE SCIENCES↗

Polarization controlled deep sub-wavelength periodic features written by femtosecond laser on nanodiamond thin film surface

Deep sub-wavelength (Λ/λ = ∼0.22) periodic features are induced uniformly on a nanodiamond (ND) thin film surface using femtosecond (fs) laser irradiation (pulse duration = ∼110 fs and central wavelength of ∼800 nm). The topography of the surface features is controlled by the laser polarization. Orientation of features is perpendicular to laser polarization. Periodicity (spatial periodicity of < λ/4) of the surface features is less than the laser wavelength. This work gives an experimental proof of polarization controlled surface plasmon-fs laser coupling mechanism prompting the interaction between fs laser and solid matter (here ND thin film) which in turn is resulting in the periodic surface features. Scanning electron microscopy in conjunction with micro Raman scattering, X-ray diffraction, and atomic force microscopy are carried out to extract surface morphology and phase information of the laser irradiated regions. This work demonstrates an easy and efficient surface fabrication technique.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and optical properties of DC reactive magnetron sputtered zinc aluminum oxide thin films

Highly transparent conductive Zinc Aluminum Oxide (ZAO) thin films have been deposited on glass substrates using DC reactive magnetron sputtering method. The thin films were deposited at 200 °C and post-deposition annealing from 15 to 90 min. XRD patterns of ZAO films exhibit only (0 0 2) diffraction peak, indicating that they have c-axis preferred orientation perpendicular to the substrate. Scanning electron microscopy (SEM) is used to study the surface morphology of the films. The grain size obtained from SEM images of ZAO thin films are found to be in the range of 20 - 26 nm. The minimum resistivity of 1.74 × 10{sup −4} Ω cm and an average transmittance of 92% are obtained for the thin film post annealed for 30 min. The optical band gap of ZAO thin films increased from 3.49 to 3.60 eV with the increase of annealing time due to Burstein-Moss effect. The optical constants refractive index (n) and extinction coefficient (k) were also determined from the optical transmission spectra.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and characterisation of nanoscale α-Al{sub 2}O{sub 3} by precipitation method

Nanometer-scale α-Al{sub 2}O{sub 3} particles have been synthesized by a simple precipitation method from an aqueous solution in the presence of AlCl{sub 3} and NH{sub 3}. The surface morphology and composition of the as-synthesized Al{sub 2}O{sub 3} nanoparticle were characterized by means of scanning electron microscopy (SEM) and X-ray diffraction (XRD). The powder was nanocrystalline in nature having hexagonal structure with unit cell parameters: a=4.76A°, c=12.99A°. The Al{sub 2}O{sub 3} nanocrystallites with an average crystal size of about 86 nm. The powder has been characterized by means of FT-IR, and UV-Vis Study. From these results it is possible to conclude that the precipitation method is a very suitable technique to prepare α-Al{sub 2}O{sub 3} materials. The technique is fast, low cost and produces well defined materials that can be used for dosimetric applications.

36 MATERIALS SCIENCE↗

Synthesis and Raman analysis of SnS nanoparticles synthesized by PVP assisted polyol method

SnS film was prepared by a simple drop casting method after synthesizing SnS nanoparticles by using PVP assisted polyol method. Confocal Raman study was carried out for the as deposited and annealed (150, 300 and 400 °C) films at two different excitation wavelengths 514 and 785 nm. At the excitation wavelength of 514 nm, the Raman modes showed for a mixed phase of SnS and SnS{sub 2} up to 150 °C and then only a pure SnS phase was observed up to 400 °C due to the dissociation of SnS{sub 2} in to SnS by releasing S. The increase in intensity of Raman (A{sub g} and B{sub 3g}) as well as IR (B{sub 3u}) active modes of SnS are observed with increasing annealing temperature at excitation wavelength 785 nm due to the increased crystallinity and inactiveness of SnS{sub 2} modes. X-ray diffraction confirming the formation of a single phase of SnS while the greater homogeneity in both size and shape of SnS nanoparticles were confirmed through surface morphology from SEM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graphite edge controlled registration of monolayer MoS{sub 2} crystal orientation

Transition metal dichalcogenides such as the semiconductor MoS{sub 2} are a class of two-dimensional crystals. The surface morphology and quality of MoS{sub 2} grown by chemical vapor deposition are examined using atomic force and scanning tunneling microscopy techniques. By analyzing the moiré patterns from several triangular MoS{sub 2} islands, we find that there exist at least five different superstructures and that the relative rotational angles between the MoS{sub 2} adlayer and graphite substrate lattices are typically less than 3°. We conclude that since MoS{sub 2} grows at graphite step-edges, it is the edge structure which controls the orientation of the islands, with those growing from zig-zag (or armchair) edges tending to orient with one lattice vector parallel (perpendicular) to the step-edge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗