Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALKYLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Reactions of Propyl Radicals: A Shock Tube - VUV Photoionization Mass Spectrometry Study

The pyrolytic reactions of n-propyl and i-propyl radicals and their precursors have been investigated at elevated temperatures and pressures (600 – 900 K and 5 – 8 bar). The studies were performed in a miniature high repetition rate shock tube with synchrotron vacuum ultraviolet photoionization mass spectrometry yielding comprehensive datasets of temporal and photoionization energy dependencies of reagents and products. The propyl radicals were generated by pyrolysis of alkyl nitrites. In addition to the main decomposition path, NO elimination, the mass spectra allowed an alternative minor path via HNO elimination to be identified and quantified. For the n-propyl precursor the HNO elimination route accounted for 9% of the alkyl nitrite while for the i-propyl precursor it was 2.5%. These values are in good agreement with a recent study on i-butyl radicals in the same apparatus at similar conditions. The ratio of disproportionation/recombination was obtained for n- propyl from the relative concentrations of n-hexane and propene and for i-propyl from 2,3-dimethyl butane and propene. For n-propyl the ratio is 0.3 and 1.2 for i-propyl, both are independent of temperature and pressure over the experimental range. The disproportionation/recombination ratios are about a factor of 2 higher than prior evaluations that are based mainly on room temperature data. The experimental results are some of the first from the apparatus used and comments are made about the technique, challenges encountered, and suggestions for future developments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanisms of catalytic cleavage of benzyl phenyl ether in aqueous and apolar phases

Catalytic pathways for the cleavage of ether bonds in benzyl phenyl ether (BPE) in liquid phase using Ni- and zeolite-based catalysts are explored. In the absence of catalysts, the C-O bond is selectively cleaved in water by hydrolysis, forming phenol and benzyl alcohol as intermediates, followed by alkylation. The hydronium ions catalyzing the reactions are provided by the dissociation of water at 523 K. Upon addition of HZSM-5, rates of hydrolysis and alkylation are markedly increased in relation to proton concentrations. In the presence of Ni/SiO 2 , the selective hydrogenolysis dominates for cleaving the C aliphatic -O bond. Catalyzed by the dual-functional Ni/HZSM-5, hydrogenolysis occurs as the major route rather than hydrolysis (minor route). In apolar undecane, the non-catalytic thermal pyrolysis route dominates. Hydrogenolysis of BPE appears to be the major reaction pathway in undecane in the presence of Ni/SiO 2 or Ni/HZSM-5, almost completely suppressing radical reactions. Density functional theory (DFT) calculations strongly support the proposed C-O bond cleavage mechanisms on BPE in aqueous and apolar phases. These calculations show that BPE is initially protonated and subsequently hydrolyzed in the aqueous phase. Finally, DFT calculations suggest that the radical reactions in non-polar solvents lead to primary benzyl and phenoxy radicals in undecane, which leads to heavier condensation products as long as metals are absent for providing dissociated hydrogen.

Alkylation↗

Facile synthesis of hollow zeolite microspheres through dissolution–recrystallization procedure in the presence of organosilanes

Hollow zeolite microspheres have been hydrothermally synthesized in the presence of organosilanes via a dissolution–recrystallization procedure. In the presence of organosilanes, zeolite particles with a core/shell structure formed at the first stage of hydrothermal treatment, then the core was consumed and recrystallized into zeolite framework to form the hollow structure during the second hydrothermal process. The influence of organosilanes was discussed, and a related dissolution–recrystallization mechanism was proposed. In addition, the hollow zeolite microspheres exhibited an obvious advantage in catalytic reactions compared to conventional ZSM-5 catalysts, such as in the alkylation of toluene with benzyl chloride. - Graphical abstract: Hollow zeolite spheres with aggregated zeolite nanocrystals were synthesized via a dissolution–recrystallization procedure in the presence of organosiline. Highlights: ► Hollow zeolite spheres with aggregated zeolite nanocrystals were synthesized via a dissolution–recrystallization procedure. ► Organosilane influences both the morphology and hollow structure of zeolite spheres. ► Hollow zeolite spheres showed an excellent catalytic performance in alkylation of toluene with benzyl chloride.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, characterization and catalytic activity of a novel mesoporous ZSM-5 zeolite

Highlights: ► Mesoporous ZSM-5 zeolites. ► The strong acidic intensity. ► High activity for the alkylation of phenol and tert-butyl alcohol. ► Remarkable hydrothermal stability. - Abstract: A novel mesoporous ZSM-5 zeolite was hydrothermally synthesized using glucose as a template. Characterizations by XRD, TEM and nitrogen isotherms indicated that ZSM-5 possessed worm-like mesoporous. {sup 27}Al-MAS-NMR and NH{sub 3}-TPD showed that the mesoporous ZSM-5 preserved tetrahedral coordination aluminum and stronger acidity than conventional mesoporous material. As-prepared mesoporous ZSM-5 was successfully used in alkylation reaction of phenol with tert-butanol and exhibited significantly high phenol conversion and 2,4-DTBP selectivity. In addition, the hydrothermal stability was also studied by boiling in water for 7 days and displayed good results.

36 MATERIALS SCIENCE↗

Inhibition of autophagy enhances DNA damage-induced apoptosis by disrupting CHK1-dependent S phase arrest

DNA damage has been shown to induce autophagy, but the role of autophagy in the DNA damage response and cell fate is not fully understood. BO-1012, a bifunctional alkylating derivative of 3a-aza-cyclopenta[a]indene, is a potent DNA interstrand cross-linking agent with anticancer activity. In this study, BO-1012 was found to reduce DNA synthesis, inhibit S phase progression, and induce phosphorylation of histone H2AX on serine 139 (γH2AX) exclusively in S phase cells. Both CHK1 and CHK2 were phosphorylated in response to BO-1012 treatment, but only depletion of CHK1, but not CHK2, impaired BO-1012-induced S phase arrest and facilitated the entry of γH2AX-positive cells into G2 phase. CHK1 depletion also significantly enhanced BO-1012-induced cell death and apoptosis. These results indicate that BO-1012-induced S phase arrest is a CHK1-dependent pro-survival response. BO-1012 also resulted in marked induction of acidic vesicular organelle (AVO) formation and microtubule-associated protein 1 light chain 3 (LC3) processing and redistribution, features characteristic of autophagy. Depletion of ATG7 or co-treatment of cells with BO-1012 and either 3-methyladenine or bafilomycin A1, two inhibitors of autophagy, not only reduced CHK1 phosphorylation and disrupted S phase arrest, but also increased cleavage of caspase-9 and PARP, and cell death. These results suggest that cells initiate S phase arrest and autophagy as pro-survival responses to BO-1012-induced DNA damage, and that suppression of autophagy enhances BO-1012-induced apoptosis via disruption of CHK1-dependent S phase arrest. - Highlights: • Autophagy inhibitors enhanced the cytotoxicity of a DNA alkylating agent, BO-1012. • BO-1012-induced S phase arrest was a CHK1-dependent pro-survival response. • Autophagy inhibition enhanced BO-1012 cytotoxicity via disrupting the S phase arrest.

60 APPLIED LIFE SCIENCES↗

Chemical, Molecular, and Microstructural Evolution of Kerogen during Thermal Maturation: Case Study from the Woodford Shale of Oklahoma

Integrated elemental, spectroscopic (infrared spectroscopy and X-ray absorption near-edge structure), and gas intrusion (helium pycnometry and nitrogen adsorption) analyses are used to characterize the bulk chemical, molecular, and physical microstructures of kerogen spanning a thermal maturity transect (vitrinite reflectance, Ro, from 0.5% to 2.6%) across the Woodford Shale of the Anadarko Basin, Oklahoma. The integration takes advantage of novel procedures to prepare kerogen isolates that preserve both the chemical and physical properties of the organic matter in the bulk shale. The Woodford kerogens follow the expected trends in H/C and O/C coordinates during thermal maturation for type II kerogen. Infrared spectra show that loss of hydrogen from kerogen is related to cracking of hydrogen-rich aliphatic (alkyl) carbon structures from aromatic carbons. Within the range of Ro values < 1.5%, peripheral aromatic carbons remain highly substituted with alkyl (methyl and methylene) and probably heteroatom functional groups. At Ro values > 1.5%, these substitutions are substantially removed and replaced by hydrogen. The evolution of carbon structures inferred from the IR spectra is supported by known carbon bond dissociation energies for carbonaceous materials. Total organic sulfur and sulfur-XANES data show that sulfur in Woodford kerogens is dominated by aromatic sulfur (thiophene) and that reactive, aliphatic sulfur (sulfide) is eliminated at low degrees of thermal stress (Ro ≤ 0.9%). At higher thermal stress, sulfur speciation is stable and dominated by thermally stable thiophene. The physical properties of Woodford kerogens evolve during thermal maturation in a manner consistent with their molecular characteristics. Skeletal density of kerogen increases during maturation in a manner that is linearly correlated to its atomic H/C ratio and inferred aromatic carbon content. The specific surface area of kerogen also increases during maturation, reflecting the development of internal pores within the kerogen skeletal framework as aliphatic carbon structures are preferentially cracked and expelled from solid kerogen. The quantitative chemical and structural changes expressed by the Woodford kerogens during thermal maturation, including their hydrogen and carbon content, carbon speciation, and skeletal density, are shown by comparison to not be measurably different for other type II kerogens from numerous oil- and gas-producing shale plays, indicating that thermal stress acts to drive maturation of type II kerogen in a similar way globally.

58 GEOSCIENCES↗

Directed Gas-Phase Formation of The Propargyl Family of Resonance-Stabilized Radicals in The Reactions of Ground-State Carbon Atoms (C; 3 P j ) with Butene Isomers (C 4 H 8 ): Dimethylpropargyl and Ethylpropargyl

The propargyl radical (C 3 H 3 ) is the simplest resonance-stabilized free radical (RSFR), but how does stepwise methyl substitution in the alkene reactant affect its dynamics of their formation? We report a crossed molecular beam study of the reactions of atomic carbon (C, 3 P j ) with four butene isomers (C 4 H 8 ) under single collision conditions at a collision energy of 28 ± 2 kJ mol −1 . Barrierless addition of atomic carbon to the alkene C=C bond triggers ring opening to triplet substituted allenes—a de facto insertion mechanism—followed by unimolecular decomposition via atomic hydrogen (H), methyl (CH 3 ) or ethyl (C 2 H 5 ) loss, yielding a family of propargyl‑type RSFRs. RRKM calculations reveal that the branching ratios are highly sensitive to the alkene structure. While the methyl loss channel, affording 1‑methylpropargyl, dominates for 2 butenes (80–90%), the predicted hydrogen atom loss channel (≈10%) leading to 1,3 dimethylpropargyl is identified in the experiment by comparison with theoretical energetics. For isobutene, a near‑equal competition is seen, with the reaction producing 3‑methylpropargyl (≈50%) and 1,1‑dimethylpropargyl (≈40%), along with 2‑vinylallyl (≈5%), whose formation is supported by the experimental data. Most notably, the reaction with 1 butene uniquely favors an enthalpically driven hydrogen shift, eventually producing 1 vinylallyl (≈38%), which is assigned based on the excellent agreement between the measured and calculated reaction exothermicity. Rapid entropically favored fragmentation channels yield ≈40% of propargyl type species (propargyl, 1- and 3-ethylpropargyls), slightly outcompeting the allyl type product. Furthermore, these results establish a systematic progression from C 2 H 4 to C 4 H 8 , where the increasing alkyl substitution unlocks new fragmentation channels, providing a versatile gas phase route to alkylated RSFRs—key intermediates in the growth of methylated and ethylated PAHs and aliphatic chains in combustion and cold interstellar environments (molecular clouds).

Alkyls↗

Effect of Hydrogen-Induced Metallization on Chemisorption

Hydrogen adsorption on transition-metal oxides can lead to surface metallization, but it is unclear how this change of surface property impacts the subsequent surface chemistry and catalysis. Herein, we investigate from the first-principles density functional theory how hydrogen-induced metallization affects the adsorption of common intermediates during the conversion of oxygenates and alkanes (such as alkoxy and alkyl groups) on the SrTiO 3 (001) surface. We find that alkoxy adsorption is greatly enhanced by hydrogen-induced metallization and the strength increases with the hydrogen coverage. This is because hydrogen adsorption leads to electron donation to the Ti site, which then forms a bond with the alkoxy group. The enhancement is found to be nonlocal. The same chemistry is also responsible for the enhanced adsorption of alkyl groups on the Ti site, which renders a switch in the site preference from the O site on pristine SrTiO 3 (001) to the Ti site on hydrogen-functionalized SrTiO 3 (001). Furthermore, these insights shed light on the impact of hydrogen-induced metallization on the chemisorption on a perovskite surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Competitive Adsorption of Lubricant Base Oil and Ionic Liquid Additives at Air/Liquid and Solid/Liquid Interfaces

Oil-soluble ionic liquids (ILs) have been proved as effective additives in lubricant oils through tribological experiments and post-test analytical analyses. Here, surface structures of lubricant base oil, oil-soluble ILs, and their mixtures at the air/liquid and solid/liquid interfaces have been studied using sum frequency generation (SFG) vibrational spectroscopy. At the air/base oil and air/IL interfaces, the alkyl chains of the studied compounds were shown to be conformationally disordered and their terminal methyl groups point outward at the liquid surface. The base oil dominates the air/(base oil + IL) interface due to its higher surface excess propensity and larger bulk concentration. At the solid (silica) surface, ILs adopt a structure with their charged headgroups in contact with the silica surface, while their alkyl chains are more conformationally ordered or packed compared to the air/IL interface. At the interface between silica and (base oil + IL) mixtures, ILs also preferentially adsorb to the silica surface with their layer structures somewhat different from those of ILs alone. These results showed that ILs can adsorb onto the solid surface even before tribological contacts are made. The insights obtained from this SFG study provide a better understanding of the role of ionic liquids in lubrication.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Noncovalent Surface Modification of Metal–Organic Frameworks: Unscrambling Adsorption Properties via Isothermal Titration Calorimetry

Despite the importance of noncovalent interactions in the utilization of metal–organic frameworks (MOFs), using these interactions to functionalize MOFs has rarely been explored. The ease of functionalization and potential for surface-selective functionalization makes modification via noncovalent interactions promising for the creation of porous photocatalytic assemblies. Here, using isothermal titration calorimetry, photoluminescence measurements, and desorption experiments, we have explored the nature and magnitude of the interactions of [Ru(bpy) 2 (bpy-R)] 2+ -functionalized dyes with the surface of MIL-96, where R = C 3 , C 8 , C 12 , and C 18 alkyl chains of either straight-chain or cyclic conformations. The orientation of the dyes appears to be flat against the surface with respect to the long alkyl chains, and the surface concentration approaches a monolayer at high initial concentrations of dye. Strangely, the dodecyl-functionalized dye, despite having a smaller interaction energy and larger footprint than either octyl-functionalized dye, achieves the highest maximum surface concentration. Based on photoluminescence spectra, desorption experiments, and ITC data, we believe this is due to the core of the dye being lifted from the surface as the chain length increases. Our understanding of these interactions is important for further utilization of this method for the functionalization of the internal and external surface areas of MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exponential Water Uptake in Ionomer Membranes Results from Polymer Plasticization

Water content is the most influential factor in the performance of ion-exchange membranes (IEMs), controlling their mechanical rigidity, ionic conductivity, and degradation rates. Membranes absorb water exponentially at high water activity (a w ), making that region of the sorption isotherm the most influential on membrane properties. Plasticization of the polymer by water has been proposed to cause this exponential uptake at high a w . However, an integrated microscopic picture of the structure, thermodynamic, and mechanical properties of IEMs as a function of a w has remained elusive. In this work, we use large-scale molecular simulations validated with experimental measurements to compute the sorption isotherms, Young’s modulus, polymer dynamics, and structure of IEMs. The simulations unveil that the exponential increase in water uptake (WU) coincides in all cases with the glass to rubber transition of the membrane, as measured through its Young’s modulus and segmental polymer dynamics. Functionalization of the polymer with alkyl groups further contributes to its plasticization, increasing the WU at a given a w and ion-exchange capacity (IEC). The alkyl chains act synergistically with water to plasticize the polymer matrix and allow water penetration in the membrane. The simulations reveal that the width of the water channels depends on the ratio λ of water to ions in the polymer but is independent of its IEC. We conclude that differences in the polymer matrix–not the water channels–are responsible for the distinct uptake response of IEMs to the thermodynamic driving force of water activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of Heterogeneous Hydroformylation of Ethylene and Propylene over RhCo 3 /MCM-41 Catalysts

The reaction mechanisms of heterogenous hydroformylation of ethylene and propylene were compared at 413-453 K using RhCo 3 /MCM-41 as catalysts. The reaction rates of propylene for both hydroformylation and the undesired side reaction of hydrogenation were found to be about one order of magnitude lower than those for ethylene in flow reactor studies. The difference in the kinetic behavior between ethylene and propylene was investigated by measuring the reaction orders and apparent activation energies, and these macro-kinetic observables were analyzed using the degree of rate control (DRC) method. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments were performed to characterize the surface intermediates formed during the reactions. When the reactant was changed from ethylene to propylene, the IR peak corresponding to adsorbed CO exhibited a significant increase, while the IR peaks of alkyl group decreased in magnitude. Combined with the DRIFTS results, DRC analysis indicates that the first step of olefin hydroformylation, the formation of an alkyl group on the catalyst surface, plays a key role in the difference between ethylene and propylene. This step is kinetically non-relevant when ethylene is the reactant, but it is one of the rate-controlling steps for propylene. Furthermore, the low concentration of the adsorbed propyl group, which is a common intermediate shared by both hydroformylation and hydrogenation of propylene, decreases the rates of both reaction pathways as compared to ethylene.

10 SYNTHETIC FUELS↗

Molecular-scale Insights into Cooperativity Switching of x TAB Adsorption on Gold Nanoparticles

Quantifying adsorption behaviors is crucial for various applications such as catalysis, separation, and sensing, yet it is generally challenging to access in solution. Here, we report a combined experimental and computational study of the adsorption behaviors of alkyl-trimethylammonium bromides (xTAB), a class of ligands important for colloidal nanoparticle stabilization and shape control, with various alkyl chain lengths x on Au nanoparticles. We use density functional theory (DFT) to calculate xTAB binding energies on Au{111} and Au{110} surfaces with standing-up and lying-down configurations, which provides insights into the adsorption affinity and cooperativity differences of xTAB on these two facets. We demonstrate the key role of van der Waals interactions in determining the xTAB adsorption behavior. These computational results predict and explain the experimental discovery of xTAB’s adsorption behavior switch from stronger affinity, negative cooperativity to weaker affinity, positive cooperativity when the concentration of xTAB increases in solution. We also show that in the standing-up configuration, bilayer adsorption may occur on both facets, which can lead to different differential binding energies and consequently adsorption crossover between the two facets when the ligand concentration increases. Our combined experimental and computational approaches demonstrate a paradigm for gaining molecular-scale insights into adsorbate–surface interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stereospecific Enzymatic Conversion of Boronic Acids to Amines

Boronic acids and esters are highly regarded for their safety, unique reactivity, and versatility in synthesizing a wide range of small molecules, bioconjugates, and materials. They are not exploited in biocatalytic synthesis, however, because enzymes that can make, break, or modify carbon–boron bonds are rare. We wish to combine the advantages of boronic acids and esters for molecular assembly with biocatalysis, which offers the potential for unsurpassed selectivity and efficiency. Here, we introduce an engineered protoglobin nitrene transferase that catalyzes the new-to-nature amination of boronic acids using hydroxylamine. Initially targeting aryl boronic acids, we show that the engineered enzyme can produce a wide array of anilines with high yields and total turnover numbers (up to 99% yield and >4000 TTN), with water and boric acid as the only byproducts. We also demonstrate that the enzyme is effective with bench-stable boronic esters, which hydrolyze in situ to their corresponding boronic acids. Exploring the enzyme’s capacity for enantioselective catalysis, we found that a racemic alkyl boronic ester affords an enantioenriched alkyl amine, a transformation not achieved with chemocatalysts. The formation of an exclusively unrearranged product during the amination of a boronic ester radical clock and the reaction’s stereospecificity support a two-electron process akin to a 1,2-metallate shift mechanism. Here, the developed transformation enables new biocatalytic routes for synthesizing chiral amines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photochemical Tungsten–Carbon Bond Cleavage in Bicyclic Tungstacyclopentanes

W(NCPh 3 )(OSiPh 3 ) 2 (C7H 12 ) (1) and W(NAd)(OSiPh 3 ) 2 (C 7 H 12 ) (2) undergo photochemical α-hydrogen abstraction to form alkylidenes. Transient absorption studies suggest that fast W–C homolysis precedes thermal α-hydrogen abstraction. Radical trapping experiments in the presence of 5,5-dimethyl-1-pyrroline-N-oxide (DMPO) support formation of an alkyl radical in these reactions. DFT calculations of models of 1 and 2 are also consistent with formation of W(V)-alkyl-radical intermediates that ultimately abstract an α-hydrogen to form the alkylidene. This article provides evidence for W–C bond cleavage in reac-tions that convert catalytically inactive d 0 tungstacyclopentanes into metathesis-active alkylidenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of substrate specificity of Schizosaccharomyces pombe Mag1 alkylpurine DNA glycosylase

DNA glycosylases specialized for the repair of alkylation damage must identify, with fine specificity, a diverse array of subtle modifications within DNA. The current mechanism involves damage sensing through interrogation of the DNA duplex, followed by more specific recognition of the target base inside the active site pocket. To better understand the physical basis for alkylpurine detection, we determined the crystal structure of Schizosaccharomyces pombe Mag1 (spMag1) in complex with DNA and performed a mutational analysis of spMag1 and the close homologue from Saccharomyces cerevisiae (scMag). Despite strong homology, spMag1 and scMag differ in substrate specificity and cellular alkylation sensitivity, although the enzymological basis for their functional differences is unknown. We show that Mag preference for 1,N{sup 6}-ethenoadenine ({var_epsilon}A) is influenced by a minor groove-interrogating residue more than the composition of the nucleobase-binding pocket. Exchanging this residue between Mag proteins swapped their {var_epsilon}A activities, providing evidence that residues outside the extrahelical base-binding pocket have a role in identification of a particular modification in addition to sensing damage.

59 BASIC BIOLOGICAL SCIENCES↗

Ab initio O(N) elongation-counterpoise method for BSSE-corrected interaction energy analyses in biosystems

An Elongation-counterpoise (ELG-CP) method was developed for performing accurate and efficient interaction energy analysis and correcting the basis set superposition error (BSSE) in biosystems. The method was achieved by combining our developed ab initio O(N) elongation method with the conventional counterpoise method proposed for solving the BSSE problem. As a test, the ELG-CP method was applied to the analysis of the DNAs’ inter-strands interaction energies with respect to the alkylation-induced base pair mismatch phenomenon that causes a transition from G⋯C to A⋯T. It was found that the ELG-CP method showed high efficiency (nearly linear-scaling) and high accuracy with a negligibly small energy error in the total energy calculations (in the order of 10{sup −7}–10{sup −8} hartree/atom) as compared with the conventional method during the counterpoise treatment. Furthermore, the magnitude of the BSSE was found to be ca. −290 kcal/mol for the calculation of a DNA model with 21 base pairs. This emphasizes the importance of BSSE correction when a limited size basis set is used to study the DNA models and compare small energy differences between them. In this work, we quantitatively estimated the inter-strands interaction energy for each possible step in the transition process from G⋯C to A⋯T by the ELG-CP method. It was found that the base pair replacement in the process only affects the interaction energy for a limited area around the mismatch position with a few adjacent base pairs. From the interaction energy point of view, our results showed that a base pair sliding mechanism possibly occurs after the alkylation of guanine to gain the maximum possible number of hydrogen bonds between the bases. In addition, the steps leading to the A⋯T replacement accompanied with replications were found to be unfavorable processes corresponding to ca. 10 kcal/mol loss in stabilization energy. The present study indicated that the ELG-CP method is promising for performing effective interaction energy analyses in biosystems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗