Search NASA⌕ Search

SEARCH · Search NASA

Results for “Amorphous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Probing the Atomic-Scale Structure of Amorphous Aluminum Oxide Grown by Atomic Layer Deposition

Atomic layer deposition (ALD) is a well-established technique for depositing nanoscale coatings with pristine control of film thickness and composition. The trimethylaluminum (TMA) and water (H 2 O) ALD chemistry is inarguably the most widely used and yet to date, we have little information about the atomic-scale structure of the amorphous aluminum oxide (AlO x ) formed by this chemistry. This lack of understanding hinders our ability to establish process-structure-property relationships and ultimately limits technological advancements employing AlOx made via ALD. In this work, we employ synchrotron high-energy X-ray diffraction (HE-XRD) coupled with pair distribution function (PDF) analysis to characterize the atomic structure of amorphous AlO x ALD coatings. We combine ex situ and in operando HE-XRD measurements on ALD AlO x and fit these experimental data using stochastic structural modeling to reveal variations in the Al-O bond length, Al and O coordination environment, and extent of Al vacancies as a function of growth conditions. In particular, the local atomic structure of ALD AlO x is found to change with the substrate and number of ALD cycles. The observed trends are consistent with the formation of bulk Al 2 O 3 surrounded by an O-rich surface layer. We deconvolute these data to reveal atomic-scale structural information for both the bulk and surface phases. Overall, this work demonstrates the usefulness of HE-XRD and PDF analysis in improving our understanding of the structure of amorphous ALD thin films and provides a pathway to evaluate how process changes impact the structure and properties of ALD films.

36 MATERIALS SCIENCE↗

In Situ TEM Study of the Amorphous-to-Crystalline Transition during Dielectric Breakdown in TiO 2 Film

Dielectric breakdown of oxides is a main limiting factor for improvement of the performance of electronic devices. Present understanding suggests that defects produced by intense voltage accumulate in the oxide to form a percolation path connecting the two electrodes and trigger the dielectric breakdown. However, reports on directly visualizing the process at nanoscale are very limited. Here, we apply in situ transmission electron microscopy to characterize the structural and compositional changes of amorphous TiO 2 under extreme electric field (~100 kV/mm) in a Si/TiO 2 /W system. Upon applying voltage pulses, the amorphous TiO 2 gradually transformed to crystalline sub-stoichiometric rutile TiO 2-x and the Magnéli phase Ti 3 O 5 . The transitions started fromat the anode/oxide interface under both field polarities. Preferred growth orientation Epitaxial growth of rutile TiO 2-x with respect toon the Si substrate was observed when Si was the anode, while oxidation and melting of the W probe occurred when W was the anode. We associate the TiO 2 crystallization process with the electrochemical reduction of TiO 2 , polarity-dependent oxygen migration, and Joule heating. The experimental results are supported by our phase-field modeling. These findings provide direct details of the defect formation process during dielectric breakdown in amorphous oxides and will help the design of electronic devices with higher efficiency and reliability.

36 MATERIALS SCIENCE↗

Role of Amorphous Chains in Nanoplastic Formation from Semicrystalline Polymers

Semicrystalline polymers, e.g., polyethylene terephthalate (PET), release micro- (100 nm to 1 mm) and nanoplastics (up to 100 nm) [MNPL] when they are degraded under quiescent conditions. However, the exact molecular mechanisms leading to material fragmentation into MNPL are unknown. Here, we monitor the evolution of chain molecular weight and the MNPL production kinetics during hydrolysis of PET pellets. We find that only ~0.6% of the amorphous phase ester bonds are hydrolyzed at the onset of MNPL release. Then, by combining a random scission model with measured amorphous spacings, we estimate that only ~15% of the stress transmitters in the amorphous phase, namely, bridges and entangled loops, have failed by this point. Thus, spontaneous fragmentation of the semicrystalline nanostructure occurs despite significant intercrystalline connectivity. We resolve this apparent contradiction by proposing that fragmentation can only occur when progressive tie-chain scission causes the material to undergo the ductile/brittle transition. Mechanistically, we speculate that the internal stresses responsible for material fragmentation are caused by processing (i.e., residual stresses) and/or sample densification induced by chemi-crystallization. We discuss additional factors that may affect our analysis and thus require further investigation, such as skin-core effects, preferential degradation of stress transmitters and/or recrystallization processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymer-Derived Amorphous Aluminosilicate Nanomembranes for H 2 Purification

Aluminosilicate zeolite membranes with robust microporous crystalline structures are attractive for the molecular separation of H 2 from light gases, but their large-scale fabrication is complicated and costly, hindering their practical applications. Herein, we present polymer-derived amorphous aluminosilicate nanomembranes that combine the exceptional processability of polymers with the superior gas separation properties of aluminosilicates. Specifically, thin-film composite membranes comprising 150 nm polydimethylsiloxane were first treated with oxygen plasma to generate 10 nm polyorganosilica (POSi) on the surface, which were then subjected to few-cycle atomic layer deposition (ALD) using trimethylaluminum as a metal precursor and water vapor as a coreactant. This scalable two-step process yields few-nanometer amorphous aluminosilicates with strong size-sieving ability. For example, three-cycle ALD treatment of POSi increases H 2 /CO 2 selectivity from 39 to 200 and H 2 /CH 4 selectivity from 190 to 500, while decreasing H 2 permeance from 990 to 210 GPU at 150 °C, superior to the state-of-the-art membranes. In conclusion, rapid and scalable manufacturing of amorphous aluminosilicate nanolayers can also be of interest for catalysis and adsorption applications.

36 MATERIALS SCIENCE↗

Localized Order–Disorder Transitions Induced by Li Segregation in Amorphous TiO 2 Nanoparticles

Li segregation and transport characteristics in amorphous TiO2 nanopartides (NPs) are studied using molecular dynamics (MD) simulations. A strong intrapartide segregation of Li is observed, and the degree of segregation is found to correlate with Li concentration. With increasing Li concentration, Li diffusivity and segregation are enhanced, and this behavior is tied to the structural response of the NPs with increasing lithiation. The atoms in the amorphous NPs undergo rearrangement in the regions of high Li concentration, introducing new pathways for Li transport and segregation. These localized atomic rearrangements, in turn, induce preferential crystallization near the surfaces of the NPs. Such rich, dynamical responses are not expected for crystalline NPs, where the presence of well-defined lattice sites leads to limited segregation and transport at high Li concentrations. The preferential crystallization in the near-surface region in amorphous NPs may offer enhanced stability and fast Li transport for Li-ion battery applications, in addition to having potentially useful properties for other materials science applications.

amorphous titania↗

Nanoscale Amorphization of Poly(Triarylamine) for Efficient and Stable Inverted Perovskite Photovoltaics

Perovskite solar modules require hole-selective layers that combine efficient charge extraction, interfacial uniformity and scalable processing. Poly(triarylamine) (PTAA) is widely used in high-performance inverted perovskite photovoltaics, but its nanoscale crystallization and aggregation on indium tin oxide can disrupt film continuity, increase interfacial recombination and limit module stability. Here we show that 4-fluorobenzylphosphonic acid (4FBPA) modifies the surface of indium tin oxide to induce nanoscale amorphization of PTAA, forming a uniform sub-10-nm hole-selective layer. The molecule binds to indium tin oxide through a dehydration reaction, tunes the work function and surface free energy of the photoanode, and improves energy-level alignment with PTAA. The resulting amorphous PTAA film shows enhanced conductivity and hole extraction, suppresses non-radiative recombination at the buried interface and promotes more uniform perovskite growth. Inverted perovskite solar cells reach a power conversion efficiency of 26.63%, while blade-coated modules achieve a certified quasi-steady-state efficiency of 23.01%. The modules retain 95.9% of their initial efficiency after 2,600 hours of maximum-power-point operation under 1-sun illumination at 65 +- 5 degrees C in nitrogen. These results identify nanoscale amorphization of polymeric hole-selective layers as a route to efficient and stable inverted perovskite photovoltaics.

14 SOLAR ENERGY↗

Atomic structure of amorphous and crystallized Ge{sub 15}Sb{sub 85}

Ge{sub 15}Sb{sub 85} is a promising material for phase-change memory applications owing to its very short crystallization times. As deposited amorphous samples of sputter deposited Ge{sub 15}Sb{sub 85} have been investigated by extended x-ray absorption fine structure (EXAFS) measurements on both, Sb and Ge K absorption edges. After crystallizing the specimen, x-ray diffraction (XRD) and EXAFS measurements have been performed to analyze the atomic structure at different annealing conditions. Thus, experimental techniques focusing on the long range order as well as on the local order have been combined. Sb atoms have on average 3.2(2) nearest neighbors, while Ge atoms have 4.0(3). The Ge-Ge and Ge-Sb bond lengths are determined to 2.46(2) and 2.66(1) A, respectively and agree well with those observed in the amorphous phase of the common phase-change material Ge{sub 2}Sb{sub 2}Te{sub 5}. After crystallizing the sample at 250 deg. C, very different EXAFS spectra with modified Ge-Sb bond lengths are observed. The higher concentration of Ge neighbors at the Ge edge as compared to the as-deposited sample is indicative for phase separation. For the corresponding sample, XRD does not show reflections of Ge, which indicates that the agglomeration of Ge is amorphous or below the coherence length of the x-radiation. The EXAFS spectrum shows a superposition of two phases: one with bond lengths which agree with sp{sup 3}-hybridized Ge [2.43(1) A] and another one with longer Ge-Ge bond lengths [2.79(8) A]. This result can be explained by phase separation in the material.

36 MATERIALS SCIENCE↗

Preferential refilling and planarization of grooves with amorphous carbon by using gas cluster ion beam irradiations

Surface planarization is important for fabrication of patterned media. One of the methods is smoothing of the patterned surface after deposition of refilling materials. However it requires two process steps. In this study, we studied planarization of patterned media by formation of refilling films with gas cluster ion beam (GCIB) assisted deposition to reduce the process step. Hard amorphous carbon films were deposited on line-and-space pattern (100 nm pitch, 20 nm in depth) by using Ar-GCIB assisted deposition. From the atomic force microscope and the cross-sectional transmission electron microscope observations, the line-and-space patterns were refilled with amorphous carbon films with Ar-GCIB assisted deposition and smooth surface was obtained. The thickness of the amorphous carbon film required for surface planarization was 32 nm, which was very small compared to the initial peak to valley (20 nm). By using this method, sputtering process for planarization can be omitted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-k (k=30) amorphous hafnium oxide films from high rate room temperature deposition

Amorphous hafnium oxide (HfO{sub x}) is deposited by sputtering while achieving a very high k{approx}30. Structural characterization suggests that the high k is a consequence of a previously unreported cubiclike short range order in the amorphous HfO{sub x} (cubic k{approx}30). The films also possess a high electrical resistivity of 10{sup 14} {Omega} cm, a breakdown strength of 3 MV cm{sup -1}, and an optical gap of 6.0 eV. Deposition at room temperature and a high deposition rate ({approx}25 nm min{sup -1}) makes these high-k amorphous HfO{sub x} films highly advantageous for plastic electronics and high throughput manufacturing.

36 MATERIALS SCIENCE↗

Characterization and control of crystal nucleation in amorphous electron beam evaporated silicon for thin film solar cells

The kinetics of crystal nucleation in high-rate electron beam evaporated amorphous Si for polycrystalline thin film solar cells was systematically studied on SiN and selected ZnO:Al-coated glass substrates with dissimilar surface topographies by employing Raman spectroscopy, transmission electron microscopy, and optical microscopy. The influence of the surface topography of the substrate and the disorder of the deposited amorphous Si could be correlated to the respective characteristics of the transient and steady state regime of the nucleation rate. The steady state nucleation rate I{sub ss}, its corresponding activation energy E{sub Iss}, and consequently the size of the grains in the crystallized Si were found to be governed by the interplay between the surface roughness and the deposition temperature. The steady state nucleation rate I{sub ss} increased gradually upon increasing the substrate roughness, while lowering the deposition temperature of the amorphous Si on rough textures resulted in a decline of I{sub ss}. The time-lag {tau}, which represents a distinctive parameter for the transient regime, was only slightly affected by the substrate topography. The deposition temperature, however, had a significant influence on {tau}, with {tau} increasing by a factor of 8 upon lowering the deposition temperature from 300 to 200 deg. C for all substrate topographies. These characteristics could be correlated with the increasing structural disorder of the deposited a-Si upon decreasing the deposition temperature. Based on this analysis, we could determine design rules for the controlled preparation of large-grained poly-Si in minimized processing time on any of the used substrate types by individually adjusting the deposition temperature and implementing nucleation layers.

36 MATERIALS SCIENCE↗

Pressure-induced Amorphization in Mayenite (12CaO · 7Al2O3)

We report a joint experimental and theoretical study on high pressure structures of nanoporous mayenite (12CaO {center_dot} 7Al{sub 2}O{sub 3}). A pressure-induced amorphization was identified at -13 GPa by in situ high pressure x-ray experiments. The amorphous product can be decompressed to ambient conditions. Ab initio calculations reveal that the anisotropic deformations of empty cages break the crystallographic long-range orders, leading to the formation of high-pressure amorphous state. Furthermore, the deformation routes of empty cages are found fully dependent on their individual locally structural geometry relevant to the distribution of extra-framework oxygen ions.

74 ATOMIC AND MOLECULAR PHYSICS↗

XPS Study of Thermally Evaporated Ge-Sb-Te Amorphous Thin Films

Amorphous thin films were prepared from the bulk composition of Ge{sub 22}Sb{sub 22}Te{sub 56}(GST) alloy by thermal evaporation in good vacuum condition. The amorphous nature of as-deposited films was checked with x-ray diffraction (XRD) studies. X-ray photoelectron spectroscopy (XPS) has been used to determine the binding energies of the core electrons in amorphous thin GST films. In XPS, we performed the survey scan from the binding energy (BE) range from 0-1100 eV and core level spectra of Ge 3d, Sb 3d and Te 3d.

36 MATERIALS SCIENCE↗

Characterization of amorphous In{sub 2}O{sub 3}: An ab initio molecular dynamics study

In this work, we report on the structural and electronic properties of amorphous In{sub 2}O{sub 3} obtained with ab initio molecular dynamics. Our results show crystal-like short range InO{sub 6} polyhedra having average In-O distance consistent with x-ray spectroscopy data. Structural disorder yields band tailing and localized states, which are responsible of a strong reduction of the electronic gap. Most importantly, the appearance of a peculiar O-O bond imparts n-type character to the amorphous compound and provides contribution for interpreting spectroscopic measurements on indium based oxidized systems. Our findings portray characteristic features to attribute transparent semiconductive properties to amorphous In{sub 2}O{sub 3}.

36 MATERIALS SCIENCE↗

Nanosecond in situ transmission electron microscope studies of the reversible Ge{sub 2}Sb{sub 2}Te{sub 5} crystalline <==> amorphous phase transformation

Chalcogenide-based phase-change materials have wide use in optical recording media and are growing in importance for use in non-volatile electronic memory. For both applications, rapid switching between the amorphous and crystalline phases is necessary, and understanding the changes during rapidly driven phase transitions is of scientific and technological significance. Laser-induced crystallization and amorphization occur rapidly and changes in atomic structure, microstructure, and temperature are difficult to observe experimentally and determine computationally. We have used nanosecond-scale time-resolved diffraction with intense electron pulses to study Ge{sub 2}Sb{sub 2}Te{sub 5} during laser crystallization. Using a unique and unconventional specimen geometry, cycling between the amorphous and crystalline phases was achieved, enabling in situ transmission electron microscope (TEM) study of both microstructural and crystallographic changes caused by repeated switching. Finite element analysis was used to simulate interactions of the laser with the nano-structured specimens and to model the rapidly changing specimen temperature. Such time-resolved experimental methods combined with simulation of experimentally inaccessible physical characteristics will be fundamental to advancing the understanding of rapidly driven phase transformations.

36 MATERIALS SCIENCE↗

Transmission electron microscopy of the amorphization of copper indium diselenide by in situ ion irradiation

Copper indium diselenide (CIS), along with its derivatives Cu(In,Ga)(Se,S){sub 2}, is a prime candidate for use in the absorber layers of photovoltaic devices. Due to its ability to resist radiation damage, it is particularly well suited for use in extraterrestrial and other irradiating environments. However, the nature of its radiation hardness is not well understood. In this study, transmission electron microscopy (TEM) with in situ ion irradiation was used to monitor the dynamic microstructural effects of radiation damage on CIS. Samples were bombarded with 400 keV xenon ions to create large numbers of atomic displacements within the thickness of the TEM samples and thus explore the conditions under which, if any, CIS could be amorphized. By observing the impact of heavily damaging radiation in situ--rather than merely the end-state possible in ex situ experiments--at the magnifications allowed by TEM, it was possible to gain an understanding of the atomistic processes at work and the underlying mechanism that give rise to the radiation hardness of CIS. At 200 K and below, it was found that copper-poor samples could be amorphized and copper-rich samples could not. This difference in behavior is linked to the crystallographic phases that are present at different compositions. Amorphization was found to progress via a combination of one- and two-hit processes. The radiation hardness of CIS is discussed in terms of crystallographic structures/defects and the consequences these have for the ability of the material to recover from the effects of displacing radiation.

36 MATERIALS SCIENCE↗

Electrical properties of the amorphous interfacial layer between Al electrodes and epitaxial NiO films

The amorphous interfacial layer (a-IL) between Al electrode and epitaxial NiO films were studied using electron energy-loss spectroscopy (EELS) and energy-dispersive x-ray spectroscopy. Two distinct properties were found in the a-IL, i.e., a lower metallic and an upper insulating layer. EELS results revealed that the metallic Ni atoms were responsible for the conducting nature of the lower oxide amorphous layer. The resistance behavior of Al/a-IL/epi-NiO was changed from a high to a low resistance state after forming process. The resistance change could be explained by the formation of a nanocrystalline metal alloy in the insulating amorphous layer.

36 MATERIALS SCIENCE↗

Plasma plume effects on the conductivity of amorphous-LaAlO{sub 3}/SrTiO{sub 3} interfaces grown by pulsed laser deposition in O{sub 2} and Ar

Amorphous-LaAlO{sub 3}/SrTiO{sub 3} interfaces exhibit metallic conductivity similar to those found for the extensively studied crystalline-LaAlO{sub 3}/SrTiO{sub 3} interfaces. Here, we investigate the conductivity of the amorphous-LaAlO{sub 3}/SrTiO{sub 3} interfaces grown in different pressures of O{sub 2} and Ar background gases. During the deposition, the LaAlO{sub 3} ablation plume is also studied, in situ, by fast photography and space-resolved optical emission spectroscopy. An interesting correlation between interfacial conductivity and kinetic energy of the Al atoms in the plume is observed: to assure conducting interfaces of amorphous-LaAlO{sub 3}/SrTiO{sub 3}, the kinetic energy of Al should be higher than 1 eV. Our findings add further insights on mechanisms leading to interfacial conductivity in SrTiO{sub 3}-based oxide heterostructures.

36 MATERIALS SCIENCE↗

Nanocrystallization of amorphous M-Si thin film composites (M=Cr, Mn) and their thermoelectric properties

We report on electrical resistivity and thermoelectric power of Cr-Si and Mn-Si composite films at temperatures from 300 K to 1000 K. The films were deposited on unheated Si/SiO{sub 2} substrates by magnetron sputtering from composite targets. The as-deposited films have amorphous structure. We use annealing with in-situ transport properties measurements to transform the films into nanocrystalline state with continuous monitoring their state. Nanocrystallization is considered as a promising way to improve thermoelectric efficiency, primarily due to reduction of lattice thermal conductivity {kappa}. Among variety of methods for fabrication of NC materials, crystallization from amorphous state has features which are crucially important with respect to their electronic transport properties: since the crystallites and their interfaces are formed in this method via solid state reaction, the NC samples are dense and the interfaces are clean. This removes additional factors affecting properties of a nanocrystalline composite, such as contamination of nanocrystal interfaces by elements from environment or nanocrystal lattice distortion during nanocrystallization. Depending on the initial film composition, the films are transformed during annealing into single phase or multi-phase nanocrystalline composites with average grain size of 10 nm to 20 nm. We study the crystallization kinetics, stability of amorphous and nanocrystalline state and relation between electronic transport properties and structural state of the composites.

36 MATERIALS SCIENCE↗