Search NASA⌕ Search

SEARCH · Search NASA

Results for “Bulk System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

X-ray Micro-Tomography of Ablative Heat Shield Materials

X-ray micro-tomography is a non-destructive characterization technique that allows imaging of materials structures with voxel sizes in the micrometer range. This level of resolution makes the technique very attractive for imaging porous ablators used in hypersonic entry systems. Besides providing a high fidelity description of the material architecture, micro-tomography enables computations of bulk material properties and simulations of micro-scale phenomena. This presentation provides an overview of a collaborative effort between NASA Ames Research Center and Lawrence Berkeley National Laboratory, aimed at developing micro-tomography experiments and simulations for porous ablative materials. Measurements are carried using x-rays from the Advanced Light Source at Berkeley Lab on different classes of ablative materials used in NASA entry systems. Challenges, strengths and limitations of the technique for imaging materials such as lightweight carbon-phenolic systems and woven textiles are discussed. Computational tools developed to perform numerical simulations based on micro-tomography are described. These enable computations of material properties such as permeability, thermal and radiative conductivity, tortuosity and other parameters that are used in ablator response models. Finally, we present the design of environmental cells that enable imaging materials under simulated operational conditions, such as high temperature, mechanical loads and oxidizing atmospheres.Keywords: Micro-tomography, Porous media, Ablation

tomography↗
NASA NTRSDate not supplied

Ryugu and the Quest for Unaltered CI-Like Materials From the Early Solar System

Samples of C-type asteroid (162173) Ryugu returned by the Hayabusa2 mission of JAXA [1-3] have been found to be mineralogically, chemically, and isotopically similar to CI carbonaceous chondrites [3-6]. The rare CI meteorites have bulk chemical compositions closely matching the solar photosphere in all but the most volatile elements, and so are considered to represent the starting composition of the solar system. Paradoxically, however, all known CI have been extensively altered by aqueous fluids (i.e., they are CI1), so that their primary mineralogy, textures, and oxygen isotope compositions have been obscured. Thus, one of the most exciting discoveries from Ryugu samples is that they contain “less-altered” (CI2) areas, which have substantial abundances of anhydrous silicates (olivine and pyroxene) and Ca-Al-rich phases that may be remnants of primordial CI3 materials [4-11]. This discovery has motivated new investigations of CIs that show higher abundances of anhydrous silicate grains than previously recognized [9,12,13]. Such studies are an important step in the search for unaltered CI-like material, a so-called “holy grail” of meteoriticists [14]. To further this goal, we are studying Ryugu samples in the context of a previously unrecognized, potentially Ryugu-like, population of C2 materials that occur as xenoliths in polymict ureilites.

C A Goodrich↗
NASA NTRS1998

Measurements of solar system dust at R < 1 AU and R > 3 AU

In Situ experiments on space craft yield information about dust parameters such as velocity, flux and size, and mass of particles. In Situ experiments as well as brightness measurements in the inner solar system have been made with Helios from .3 to 1 AU in the ecliptic plane which reveal two different dust populations with different bulk densities and relative velocities to the spacecraft. Zodiacal light measurements from Helios 1 and 2 reveal a radial brightness gradient proportional to R(exp -2.3). Measurements of dust particles in the outer solar system have been made onboard the Pioneer 10 and 11 spacecraft and for the high latitude region with Ulysses. Pioneer 10 and 11 also carried a spin-scan photopolarimeter that was used to map the zodiacal light and background starlight during the cruise to Jupiter in two broad bandpasses centered at .44 and .64 micron. Details of these measurements are briefly discussed.

Mann, Ingrid↗
NASA NTRS2020

Hardness-Strength Correlations in Zr(Cu)-Based BMG Alloys for QA Purposes

Quality assurance (QA) of bulk metallic glass (BMG) components would be expedited if hardness testing could provide a ready estimate of material strength. Consequently, a compilation of published data for Zr(Cu)-based alloys on the relationship between Vickers hardness (HV) and tensile/compressive strength (σ) is presented. An assessment reveals that the majority of data are confined within the hardness range of HV = 4.4−6.2 GPa and the strength range of σ = 1.4−2.3 GPa. Assuming a linear relationship, the statistical average of the hardness-strength correlation for BMGs (HV/σ = 2.87 ± 0.35) is very close to that established for non-austenitic steels (HV/σ = 2.86 ± 0.05). Unfortunately, the standard deviation of the BMG data is too broad for any type of correlation to be exploited for QA purposes. However, the narrow hardness range suggests that significant departures from the fully amorphous state resulting from processing variations may be detectable via indentation testing. Therefore, the relationship between hardness and volume/distribution of crystallinity for a specific alloy system warrants further investigation.

Bulk metallic glass↗
DOE OSTI2025

Design, Fabrication and Concept for the Surface Treatment of the SRF Cavity Prototype for the CLIC Damping Rings

The Compact Linear Collider (CLIC) Damping Rings (DRs) need to generate ultra-low emittance bunches to achieve high luminosity in CLIC. This requires many wiggler magnets with big energy loss which is compensated by the Radio Frequency (RF) system. The resulting strong beam loading transients lead to a challenging design for the RF system. A novel SRF cavity at 2 GHz with an ultra-low R/Q parameter of below 1 Ω is proposed to minimize the transient beam loading effects below acceptable level. The design and fabrication of the bulk Nb prototype based on turning from a single piece of Nb and EB welding is presented. Moreover, conceptual study of the system for cavity surface treatment to achieve the highest surface magnetic field which is the main goal of the prototype cold test is described as well. To enable excellent performance in this cavity, we plan to apply the 75/120C modified low temperature bake in combination with the cold electropolishing process. This surface treatment approach has been shown to consistently deliver high accelerating gradients and improved quality factors in TESLA-shaped 1.3 GHz SRF cavities. By adapting and implementing this process for the 2 GHz ultra-low R/Q design, we aim to maximize the achievable surface magnetic field while minimizing residual resistance and field emission. This treatment strategy will be critical for demonstrating that the cavity can meet the demanding performance requirements of the CLIC damping ring RF system under high beam loading conditions.

Bafia, Daniel P. [Fermilab]↗
NASA NTRS2015

Experiments on Lunar Core Composition: Phase Equilibrium Analysis of A Multi-Element (Fe-Ni-S-C) System

Previous geochemical and geophysical experiments have proposed the presence of a small, metallic lunar core, but its composition is still being investigated. Knowledge of core composition can have a significant effect on understanding the thermal history of the Moon, the conditions surrounding the liquid-solid or liquid-liquid field, and siderophile element partitioning between mantle and core. However, experiments on complex bulk core compositions are very limited. One limitation comes from numerous studies that have only considered two or three element systems such as Fe-S or Fe-C, which do not supply a comprehensive understanding for complex systems such as Fe-Ni-S-Si-C. Recent geophysical data suggests the presence of up to 6% lighter elements. Reassessments of Apollo seismological analyses and samples have also shown the need to acquire more data for a broader range of pressures, temperatures, and compositions. This study considers a complex multi-element system (Fe-Ni-S-C) for a relevant pressure and temperature range to the Moon's core conditions.

Go, B. M.↗
DOE OSTI2025

Microwave dielectric properties of LiNbO$_{\mathbf{3}}$ and AlN at millikelvin temperatures and single-photon power

Electro-optic materials are paramount to achieving efficient and reliable microwave-optical signal transduction in the quantum regime. It is of great interest to investigate the performance of these materials at the quantum level and at cryogenic temperatures to assess their compatibility with superconducting circuit-based quantum systems. In this work, we present a detailed study of the microwave electric properties of single-crystal bulk LiNbO$_{3}$ and AlN at millikelvin temperatures and at the single-photon level. We characterize the materials' dielectric loss tangent throughout a wide range of electromagnetic power levels in a temperature range from a few tens of millikelvin to above 1~K. Our findings indicate that both materials' loss tangent behavior is consistent with the two-level system model up to a certain power threshold, beyond which it increases logarithmically with power. This suggests that two-level system loss mechanisms dominate at the single-photon level, while additional loss channels become relevant at higher powers and temperatures.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Competing magnetic phases in Cr 3+𝛿 ⁢Te 4 are spatially segregated

Cr 1+𝑥⁢ Te 2 is a self-intercalated van der Waals system that is of current interest for its room-temperature room-temperature ferromagnetic (FM) phases and tunable topological properties. In bulk samples, the strain from the interstitial Cr ions leads to distinct structural phases for different ranges of 𝑥. Early neutron powder diffraction (NPD) measurements on the monoclinic phase Cr 3 ⁢Te 4 (𝑥=0.5) presented evidence for competing FM and antiferromagnetic (AFM) phases. Here we apply neutron diffraction to a single crystal of Cr 3+𝛿 ⁢Te 4 with 𝛿=−0.10 and discover that it consists of two distinct monoclinic phases, one with FM order below 𝑇 C ≈321 K and another that develops AFM order below 𝑇 N ≈86 K. In contrast, we find that a crystal with 𝛿=−0.26 exhibits only FM order below 𝑇 C ≈285 K. The single-crystal analysis is complemented by results obtained with NPD, x-ray powder diffraction, and transmission electron microscopy (TEM) measurements on the 𝛿=−0.10 composition. From observations of spontaneous magnetostriction of opposite sign at 𝑇 C and 𝑇 N , along with the TEM evidence for both monoclinic phases in a single thin ( ≈100 nm) grain, we conclude that the two phases must have a fine-grained ( ≲100 nm) intergrowth character, as might occur from high-temperature spinodal decomposition during the growth process. Calculations of the relaxed lattice structures for the FM and AFM phases with density functional theory provide a rationalization of the observed spontaneous magnetostrictions. Correlations between the magnitude and orientation of the magnetic moments with lattice parameter variation demonstrate that the magnetic orders are sensitive to strain, thus explaining why magnetic ordering temperatures and anisotropies can be different between bulk and thin-film samples, when the latter are subject to epitaxial strain. Our results point to the need to investigate the supposed coexistence FM and AFM phases reported elsewhere in the Cr 1+𝑥 ⁢Te 2 system, such as in the Cr 5 ⁢Te 8 phase (𝑥=0.25).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1971

Electrochemical studies in aluminum chloride melts

A melt purification system was developed which produces a final melt far superior electrochemically than those previously reported. A residual current of less than 2 microamps/sq mn at a sweep rate of 0.5 V/sec was used as the criteria for a pure melt. The use of a second purified bulk melt and a heated pipette permitted the rapid exchange of working electrode compartments while retaining the same reference electrode system. The major portion of the work was carried out in the 1:1 AlCl3:NaCl melt at 175 and 200 C. Several measurements were made in the 2:1 melt and a few on the silver systems in intermediate compositions. Programs for PDP-8I and PDP-12 digital computers and the required electronic circuitry systems were developed to carry out various electrochemical measurements in the melt. A pair of 50 yard transmission lines were used to connect the computer to the experiment. Ensemble averaging and digital, least squares smoothing are used within the programs to improve the signal-to-noise ratio by at least an order of magnitude. Some of the computerized electrochemcial techniques used to examine the different systems were pulse polarography, double pulse polarography, staircase voltammetry, kinetic double potential step chronoamperometry and double potential step chronocoulometry.

Osteryoung, R. A.↗
DOE OSTI2025

One Step Block-like Copolymers from an Upcycled Monomer Using Ring-Opening Metathesis Polymerization

Block-like copolymers can be readily synthesized in one step using monomers with widely separated reactivity ratios. Here, we show that trans,trans,trans-1,5,9-cyclododecatriene (CDT), produced from polybutadiene via cyclodepolymerization (CDP), undergoes gradient copolymerization via ring-opening metathesis polymerization (ROMP) with a selected norbornene monomer to produce a block-like copolymer that exhibits bulk nanophase separation and excellent thermomechanical performance. These data highlight a new ROMP copolymerization system with a sharp compositional drift and introduce a simple pathway to convert waste plastic into a valuable building block for high-value thermoplastic materials.

block copolymer↗
DOE OSTI2026

Single-particle detection of enhanced polarizability in Au-decorated semiconducting nanorods via scanning dielectric microscopy

Hybrid nanostructures that combine semiconducting and metallic components offer great potential for photothermal therapy, optoelectronics, and sensing, by integrating tunable optical properties with enhanced light absorption and charge transport. Boosting the integrated performance of these hybrid systems demands techniques capable of probing local variations of the physical properties inaccessible to bulk analysis. Here, we report the single-particle dielectric characterization of hybrid, semiconducting bismuth sulfide (Bi 2 S 3 ) nanorods (NR) decorated with metallic Au nanoparticles (NP), employing scanning dielectric microscopy, which uses electrostatic force microscopy in combination with finite-element numerical simulations. We reveal a pronounced enhancement in the local dielectric response of Bi2S3 upon Au decoration, attributed to interfacial polarization and electron transfer from Au to the Bi 2 S 3 matrix, thus suggesting a enhanced metallic-like polarizability at the single-particle level. Numerical simulations show that the response is dominated by the vertical component of the permittivity and that the decorating metallic Au NP produce only moderate shielding of the semiconductor Bi 2 S 3 NR core, indicating that the large increase in the dielectric response originates primarily from intrinsic modifications within the NR. Overall, these findings provide direct insight into structure–property relationships at the single-particle level, supporting the rational design of advanced hybrid nanostructures with tailored electronic functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Lattice holography on a quantum computer

We explore the potential application of quantum computers to the examination of lattice holography, which extends to the strongly coupled bulk theory regime. With adiabatic evolution, we compute the ground state of a spin system on a ( 2 + 1 )-dimensional hyperbolic lattice, and measure the spin-spin correlation function on the boundary. Notably, we observe that with achievable resources for coming quantum devices, the correlation function demonstrates an approximate scale-invariant behavior, aligning with the pivotal theoretical predictions of the anti–de Sitter/conformal field theory correspondence. Published by the American Physical Society 2024

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Emission in closely packed Eu (TTA) 3 (DPT) and opportunities for magnetic dipole enhancement

Ultra-thin Langmuir-Blodgett films of amphiphilic complex EuTTA (DPT) with tri-valent Eu ions are highly luminescent even when deposited directly on metal. Emission kinetics obtained in bulk samples and Langmuir-Blodgett films are very different for dense and diluted systems. Here, the experiments indicate a collective emitter behavior in dense systems, which is also sensitive to metal or dielectric environments. In another experiment, using metal-emitter layer-metal structures with EuTTA(DPT) we observe significant modifications of the emission line shapes and a dramatic change in magnetic-to-electric dipole branching ratio with 10-fold relative enhancement of magnetic dipole emission.

Luminescence↗
NASA NTRS1972

Experimental Hingeless Rotor Characteristics at Full Scale First Flap Mode Frequencies (including Rotor Frequency Response to Shaft Oscillations), Phase 3

The completion of the High Advance Ratio Research Program is reported. The primary objectives of the program were to experimentally determine the rotor frequency response to shaft pitching and rolling oscillations and to acquire steady response and frequency response data at high advance ratios for hingeless rotors with typical, full-scale, first flap mode natural frequencies. Secondary objectives of the program included the further evaluation of both the hub moment feedback control system and the simplified rigid blade flapping theory with respect to shaft oscillations. The bulk of the text is devoted to the presentation and examination of representative experimental results. All the analyzed test data are documented in tabular and/or graphical formats.

Kuczynski, W. A.↗
NASA NTRS1975

Satellite system considerations for computer data transfer

Communications satellites will play a key role in the transmission of computer generated data through nationwide networks. This paper examines critical aspects of satellite system design as they relate to the computer data transfer task. In addition, it discusses the factors influencing the choice of error control technique, modulation scheme, multiple-access mode, and satellite beam configuration based on an evaluation of system requirements for a broad range of application areas including telemetry, terminal dialog, and bulk data transmission.

Cook, W. L.↗
NASA NTRS1981

Effects of particle drift on the transport of cosmic rays. IV - More realistic diffusion coefficients

Results from numerical simulations of cosmic-ray modulations by the solar wind are presented which show that the scattering mean free path should be larger than the particle gyroradius in the average magnetic field. It is found that the difference between drift and no-drift solutions is not as great as in previous simulations, which violated the mean free path constraint stated. Profound effects are still noted for the drifts, which determine the origin of the bulk of the cosmic rays seen at any given time in the inner solar system. Accordingly, during the 1975 solar minimum, the positively charged cosmic rays seen in the inner solar system came primarily from the outer boundary near the heliospheric poles while negative particles came from the equatorial regions of the boundary.

Jokipii, J. R.↗
NASA NTRS1982

Containerless processing of Nb-Ge alloys in a long drop tube

The thirty-two meter drop tube at the Marshall Space Flight Center was used to study the effect of zero gravity containerless processing on the structure and properties of materials. The concept involves the suppression of heterogeneous nucleation of solid in liquid and, therefore, solidification accompanied by large degrees of undercooling. Under these conditions metastable phases can be formed or, at the very least, unique nonequilibrium microstructures (containing equilibrium phases) with unique properties can be produced. The drop tube solidification was applied to niobium base alloys with emphasis on the Nb-Ge binary system in an effort to produce metastable phases with high superconducting transition temperatures in bulk specimens. In the past, only lower Ge alloys (Nb-13 a/o, Nb-18 a/o, and Nb-22 a/o) could be undercooled. Higher Ge alloys (e.g., Nb-25 a/o Ge and Nb-27 a/o Ge) can now be undercooled on a routine basis.

Bayuzick, R. J.↗
NASA NTRS1989

Telemycology - A novel approach to monitoring environmental microbial load in Space Station Freedom

The currently available methods for monitoring environmental microbial load call for the cultivation of microbes on laboratory media, a time- and material-consuming task that is potentially hazardous. Telemycology proposed in this communication is designed to eliminate the need for growing microbes, especially fungi, on board the spacecraft and to shift the bulk of the work-load to the ground-based Microbiology Laboratory. The system is based on the principle of trapping microbial propagules on a membrane filter, treating it with a microbe-enhancing reagent, and examining under a microscope down-linked to the central laboratory equipped with a synchronized televideo, telerobotics, and image banking system.

Mishra, S. K.↗