Search NASA⌕ Search

SEARCH · Search NASA

Results for “CELL CONSTITUENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Preliminary feasibility analysis of a pressure modulator radiometer for remote sensing of tropospheric constituents

A pressure modulator radiometer operated in a nadir viewing mode from the top of a midlatitude summer model of the atmosphere was theoretically studied for monitoring the mean volumetric mixing ratio of carbon monoxide in the troposphere. The mechanical characteristics of the instrument on the Nimbus 7 stratospheric and mesospheric sounder experiment are assumed and CO is assumed to be the only infrared active constituent. A line by line radiative transfer computer program is used to simulate the upwelling radiation reaching the top of the atmosphere. The performance of the instrument is examined as a function of the mean pressure in and the length of the instrument gas correlation cell. Instrument sensitivity is described in terms of signal to noise ratio for a 10 percent change in CO mixing ratio. Sensitivity to mixing ratio changes is also studied. It is concluded that tropospheric monitoring requires a pressure modulator drive having a larger swept volume and producing higher compression ratios at higher mean cell pressures than the Nimbus 7 design.

Orr, H. D., III↗

Use of UV Sources for Detection and Identification of Explosives

Measurement of Raman and native fluorescence emission using ultraviolet (UV) sources (<400 nm) on targeted materials is suitable for both sensitive detection and accurate identification of explosive materials. When the UV emission data are analyzed using a combination of Principal Component Analysis (PCA) and cluster analysis, chemicals and biological samples can be differentiated based on the geometric arrangement of molecules, the number of repeating aromatic rings, associated functional groups (nitrogen, sulfur, hydroxyl, and methyl), microbial life cycles (spores vs. vegetative cells), and the number of conjugated bonds. Explosive materials can be separated from one another as well as from a range of possible background materials, which includes microbes, car doors, motor oil, and fingerprints on car doors, etc. Many explosives are comprised of similar atomic constituents found in potential background samples such as fingerprint oils/skin, motor oil, and soil. This technique is sensitive to chemical bonds between the elements that lead to the discriminating separability between backgrounds and explosive materials.

Hug, William↗

New RMnO{sub 3+δ} (R=Y, Ho; δ≈0.35) phases with modulated structure

A series of hexagonal RMnO{sub 3} (R=Y, Ho–Lu) compounds are first annealed in various highly oxidizing conditions to show that for the largest R constituents, Y and Ho, it is possible to load the phases with large amounts of excess oxygen. Within the oxygen-annealed samples we identify new heavily-oxygenated phases, that is, YMnO{sub 3.35} and HoMnO{sub 3.34}. The former is then thoroughly characterized by thermogravimetric analysis, X-ray diffraction and electron diffraction. These studies evidence a hexagonal sub-cell (a{sub S}≈3.578 Å (a{sub H}/√(3)), c{sub S}≈11.18 Å, space group P6{sub 3}mc) and satellites, associated with two modulation vectors q{sup →}{sub 1}{sup ⁎}≈0.41a{sup →}{sub S}{sup ⁎}+0.41b{sup →}{sub S}{sup ⁎}+1/3c{sup →}{sub S}{sup ⁎}andq{sup →}{sub 2}{sup ⁎}=(1/2). The results are interpreted by the formation of a modulated composite structure, resulting from the evolution of the hexagonal parent YMnO{sub 3+δ} structure toward a reduced pyrochlore-type structure Y{sub 2}Mn{sub 2}O{sub 7−x}, in long- and short-range ordering. - Graphical abstract: Hexagonal RMnO{sub 3+δ} phases are commonly taken as oxygen-stoichiometric. Here we show that the R=Y and Ho phases can be loaded with excess oxygen up to δ≈0.35 through high-pressure oxygenation annealing. Formation of a new composite structure composed of hexagonal-like RMnO{sub 3+δ} and pyrochlore-like RMnO{sub 3.5−δ} constituents is demonstrated in the case of R=Y. - Highlights: • Hexagonal RMnO{sub 3+δ} phases are commonly taken as oxygen-stoichiometric. • For R=Y and Ho phases excess-oxygen loading is possible. • Single-phase samples with a new composite structure are obtained at δ≈0.35. • The new structure is composed of hexagonal- and pyrochlore-like units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Agglomerates in Polymer Electrolyte Fuel Cell Electrodes: Part I. Structural Characterization

This two-part study characterizes the structural and transport properties of polymer electrolyte fuel cell (PEFC) cathode catalyst electrode. The agglomerates comprising the electrode are characterized with nano scale resolution X-ray computed tomography (nano-CT). A hybrid reconstruction technique is used to further refine the 3-D agglomerate microstructure and obtain 1-nm voxel resolution of the constituent catalyst, ionomer, carbon support and primary and secondary pore phases. Our analysis of nano-CT data shows that the electrode composition is heterogeneous and the agglomerates have structural heterogeneities in terms of size and composition. There is a strong correlation between the ionomer to carbon weight ratio (I/C) and agglomerate microstructure, suggesting that ionomer plays role in formation of larger agglomerates. With the hybrid reconstructions, we show that ionomer film thickness is spatially non-uniform inside the agglomerate and is strongly dependent on the I/C. Smaller agglomerate size and high I/C are shown to favor the ionomer impregnation. We demonstrate that the majority of the primary pores are smaller than 15 nm for I/C = 0.8 and higher I/C reduces the primary pore size. We also characterize the uniformity of the catalyst distribution and show that the majority of the catalyst is located away from the agglomerate surface.

agglomerate↗

A re-examination of the mechanism of whiting events: A new role for diatoms in Fayetteville Green Lake (New York, USA)

Whiting events—the episodic precipitation of fine-grained suspended calcium carbonates in the water column—have been documented across a variety of marine and lacustrine environments. Whitings likely are a major source of carbonate muds, a constituent of limestones, and important archives for geochemical proxies of Earth history. While several biological and physical mechanisms have been proposed to explain the onset of these precipitation events, no consensus has been reached thus far. Fayetteville Green Lake (New York, USA) is a meromictic lake that experiences annual whitings. Materials suspended in the water column collected through the whiting season were characterized using scanning electron microscopy and scanning transmission X-ray microscopy. Whitings in Fayetteville Green Lake are initiated in the spring within the top few meters of the water column, by precipitation of fine amorphous calcium carbonate (ACC) phases nucleating on microbial cells, as well as on abundant extracellular polymeric substances (EPS) frequently associated with centric diatoms. Whiting particles found in the summer consist of 5–7 μm calcite grains forming aggregates with diatoms and EPS. Simple calculations demonstrate that calcite particles continuously grow over several days, then sink quickly through the water column. In the late summer, partial calcium carbonate dissolution is observed deeper in the water column. Settling whiting particles, however, reach the bottom of the lake, where they form a major constituent of the sediment, along with diatom frustules. The role of diatoms and associated EPS acting as nucleation surfaces for calcium carbonates is described for the first time here as a potential mechanism participating in whitings at Fayetteville Green Lake. This mechanism may have been largely overlooked in other whiting events in modern and ancient environments.

54 ENVIRONMENTAL SCIENCES↗

Molecular beam epitaxy of ZnSSe/CdSe short-period superlattices for III–V/II–VI multijunction solar cells

Results on the molecular-beam epitaxy growth of short-period alternately-strained ZnS{sub x}Se{sub 1−x}/CdSe superlattices which are pseudomorphic to GaAs (001) substrates and possess effective band-gap values within the range of E{sub g} ≈ 2.5–2.7 eV are presented. Oscillations of the specular-spot intensity in reflection high-energy electron diffraction are used for in situ control of the superlattice parameters. A method to determine the SL parameters (compositions and thicknesses of the constituent layers) based on combined analysis of the grown structures by low-temperature photoluminescence and X-ray diffractometry is developed. It is found that the parameters of the grown ZnS{sub x}Se{sub 1−x}/CdSe superlattices are close to their design values and the density of extended defects in the structures is low even though the structure thickness (∼300 nm) considerably exceeds the critical thickness for bulk II–VI layers with the same lattice-constant mismatch.

36 MATERIALS SCIENCE↗

Xylan-cellulose core structure of oat water-extractable β-glucan macromolecule: Insight into interactions and organization of the cell wall complex

Water-extractable β-glucan with high molar mass (HM) determines health benefits of oat food. Oat β-glucan was extracted by a standardized in vitro digestion method and co-existing water-extractable polysaccharide (WEP) fraction and its HM-arabinoxylan (HM-AX) subfraction were isolated to identify their highly acid-resistant subunit and investigate molecular interactions between constituent polymers. The WEP and HM-AX samples consisted of arabinoxylans (AXs) (74 and 76 %, respectively), however, cellulose constituted the secondary component (6.6 and 12.8 %, respectively). Multi-detection HPSEC along with specific enzymatic hydrolysis of AXs revealed the presence of the HM-xylan domain (16 and 34 %, respectively) built of numerous single- and multi-component populations with random coil and rod-like conformations, which were embedded in a xylan matrix with spherical conformation and controlled the macromolecular shape. Unlike single-component populations, the multi-component ones were resistant to hydrolytic action of AX-hydrolyzing enzymes and represented the subunits that anchor matrix polysaccharides onto cellulose surface. These results indicate that water-extractable β-glucan macromolecule comprises as integral element a cellulose core with two linking populations, HM-xylan and low molar mass glucomannan, which are surrounded by a feruloylated AX-arabinan-arabinogalactan composite and next laminated by β-glucan matrix. Here, the stiff cellulose-xylan backbone is the basis of HM β-glucan organization, controlled by its cellulose-like segments.

59 BASIC BIOLOGICAL SCIENCES↗

Intrauterine exosomes are required for bovine conceptus implantation

Highlights: • Exosomes derived from the conceptuses acted on the endometrial epithelium. • Global protein analysis identified 596 exosomal proteins during peri-implantation. • Exosomes at pre-implantation up-regulated apoptosis-related genes in uterine cells. • Exosomes at post-implantation up-regulated adhesion molecule in uterine cells. Exosomes, extracellular vesicles, are present in uterine flushing fluids (UFs), which are involved in conceptus-endometrial interactions during peri-implantation periods. Despite several studies on intrauterine exosomes conducted, the roles conceptus and endometrial exosomes play during peri-implantation periods have not been well characterized. To investigate the effect of bovine intrauterine exosomes on conceptus implantation, exosomes isolated from bovine UFs during peri-implantation periods were subjected to global protein analysis. The analysis detected 596 exosomal proteins, including ruminants' pregnancy recognition factor IFNT, and 172 differentially expressed proteins with more than 1.5-fold changes in UFs on days 17, 20 and 22 pregnancy (day of conceptus implantation is initiated on days 19–19.5). Treatment of primary bovine endometrial epithelial cells with exosomes from day 17 UFs up-regulated the expression of apoptosis-related genes, and treatment with exosomes from day 20 and 22 UFs up-regulated the expression of adhesion molecule. Based on these findings, intrauterine exosomes should be considered as an essential constituent for successful implantation.

60 APPLIED LIFE SCIENCES↗

High-Pressure Raman and X-ray Diffraction Study of [beta]- and [gamma]-Polymorphs of Aluminum Hydride

Three polymorphs of alane, AlH{sub 3}, ({alpha}, {beta}, and {gamma}) were synthesized and studied at high-pressure in diamond anvil cell by Raman spectroscopy and synchrotron X-ray diffraction. According to synchrotron X-ray diffraction study, {beta}-AlH{sub 3} is stable up to 6 GPa, followed by transformation into {alpha} phase at higher pressures. X-ray-induced decomposition {gamma}-AlH{sub 3} into constituent elements was found at 15 GPa. Raman scattering study at high pressure for both {beta}- and {gamma}-AlH{sub 3} reveals transition into the {alpha} phase with high concentration of structural defects. DFT calculations (VASP code) show that instability of cubic {beta}-alane crystal structure at high pressure is caused by the strong deformation of the [AlH{sub 6}] polyhedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Balloon-borne pressure sensor performance evaluation utilizing tracking radars

The pressure sensors on balloon-borne sondes relate the sonde measurements to height above the Earth's surface through the hypsometric equation. It is crucial that sondes used to explore the vertical structure of the atmosphere do not contribute significant height errors to their measurements of atmospheric constituent concentrations and properties. A series of radiosonde flights was conducted. In most cases, each flight consisted of two sondes attached to a single balloon and each flight was tracked by a highly accurate C-band radar. For the first 19 radiosonde flights, the standard aneroid cell baroswitch assembly used was the pressure sensor. The last 26 radiosondes were equipped with a premium grade aneroid cell baroswitch assembly sensor and with a hypsometer. It is shown that both aneroid cell baroswitch sensors become increasingly inaccurate with altitude. The hypsometer radar differences are not strongly dependent upon altitude and it is found that the standard deviation of the differences at 35 km is 0.179 km.

Norcross, G. A.↗

Understanding Subsidies to Achieve Diesel Powertrain Financial Parity for Heavy-Duty Fuel Cell Electric Vehicles

The development of a long-term sustainable hydrogen energy economy for commercial vehicle transportation will need to overcome key critical technical and logistics considerations in the near term. As compared to zero-emission powertrains, fossil-fuel-based powertrains provide mission flexibility and high uptime at a comparatively low total cost of ownership (TCO). While the incumbent carbon-intensive powertrains suffer from poor efficiency and are not sustainable to support global climate change initiatives in transportation decarbonization, techno-economic challenges continue to create complex barriers to the large-scale displacement of these with highly electrified powertrains architectures. Here, this article specifically addresses opportunities that well-targeted subsidies would afford in achieving fuel cell electric powertrain financial parity with diesel powertrains in heavy-duty trucks (HDTs). It shows that a rigorous assessment of system TCO factors will be critical in designing a viable subsidy strategy. Based on powertrain component and fuel price points, subsidy variations (for both capital expenses and operating fuel expenses) are assessed and quantified to determine where and how much subsidies should be leveraged to accelerate achieving diesel system financial parity. It shows that subsidies on hydrogen fuel expenses (and associated constituents) will play an important role in achieving this goal while subsidies on capital expenses (the more typical subsidy formulation) may not always be the preferred subsidy strategy. The results provide subsidy agencies with clear guidance and a database approach to characterize and implement viable HDT hydrogen powertrain system subsidy strategies. The approach may be readily tailored for other applications and system architectures.

33 ADVANCED PROPULSION SYSTEMS↗

Investigation of Micro-Scale Architectural Effects on Damage of Composites

This paper presents a three-dimensional, energy based, anisotropic, stiffness reduction, progressive damage model for composite materials and composite material constituents. The model has been implemented as a user-defined constitutive model within the Abaqus finite element software package and applied to simulate the nonlinear behavior of a damaging epoxy matrix within a unidirectional composite material. Three different composite microstructures were considered as finite element repeating unit cells, with appropriate periodicity conditions applied at the boundaries. Results representing predicted transverse tensile, longitudinal shear, and transverse shear stress-strain curves are presented, along with plots of the local fields indicating the damage progression within the microstructure. It is demonstrated that the damage model functions appropriately at the matrix scale, enabling localization of the damage to simulate failure of the composite material. The influence of the repeating unit cell geometry and the effect of the directionality of the applied loading are investigated and discussed.

damage↗

Analysis of Factors Affecting the Performance of RLV Thrust Cell Liners

The reusable launch vehicle (RLV) thrust cell liner, or thrust chamber, is a critical component of the Space Shuttle Main Engine (SSME). It is designed to operate in some of the most severe conditions seen in engineering practice. This requirement, in conjunction with experimentally observed 'dog-house' failure modes characterized by bulging and thinning of the cooling channel wall, provides the motivation to study the factors that influence RLV thrust cell liner performance. Factors or parameters believed to be directly related to the observed characteristic deformation modes leading to failure under in-service loading conditions are identified, and subsequently investigated using the cylindrical version of the higher-order theory for functionally graded materials in conjunction with the Robinson's unified viscoplasticity theory and the power-law creep model for modeling the response of the liner s constituents. Configurations are analyzed in which specific modifications in cooling channel wall thickness or constituent materials are made to determine the influence of these parameters on the deformations resulting in the observed failure modes in the outer walls of the cooling channel. The application of thermal barrier coatings and functional grading are also investigated within this context. Comparison of the higher-order theory results based on the Robinson and power-law creep model predictions has demonstrated that, using the available material parameters, the power-law creep model predicts more precisely the experimentally observed deformation leading to the 'dog-house' failure mode for multiple short cycles, while also providing much improved computational efficiency. However, for a single long cycle, both models predict virtually identical deformations. Increasing the power-law creep model coefficients produces appreciable deformations after just one long cycle that would normally be obtained after multiple cycles, thereby enhancing the efficiency of the analysis. This provides a basis for the development of an accelerated modeling procedure to further characterize dog-house deformation modes in RLV thrust cell liners. Additionally, the results presented herein have demonstrated that the mechanism responsible for deformation leading to 'dog-house' failure modes is driven by pressure, creep/relaxation and geometric effects.

Arnold, Steven M.↗

Thermospheric wind effects on the global distribution of helium in the earth's upper atmosphere

The momentum and continuity equations for a minor gas are combined with the momentum equation for the major constituents to obtain the time dependent continuity equation for the minor species reflecting a wind field in the background gas. This equation is used to study the distributions of helium and argon at times of low, medium, and high solar activity for a variety of latitudinal-seasonal wind cells. For helium, the exospheric return flow at the higher thermospheric temperatures dominates the distribution to the extent that much larger latitudinal gradients can be maintained during periods of low solar activity than during periods of high activity. By comparison to the exospheric flow, the smoothing effect of horizontal diffusion is almost negligible. The latitudinal variation of helium observed by satellite mass spectrometers can be reproduced by the effect of a wind system of air rising in the summer hemisphere, flowing across the equator with speeds on the order of 100 to 200 m/sec, and descending in the winter hemisphere. Argon, being heavier than the mean mass in the lower thermosphere, reacts oppositely to helium in that it is enhanced in the summer hemisphere and depleted in the winter.

Reber, C. A.↗

Inhibition of IRAK-4 activity for rescuing endotoxin LPS-induced septic mortality in mice by lonicerae flos extract

Highlights: •Lonicerae flos extract (HS-23) is a clinical candidate, Phase I for sepsis treatment. •Here, HS-23 or its major constituents rescued LPS-induced septic mortality in mice. •As a mechanism, they directly inhibited IRAK-4-catalyzed kinase activity. •Thus, they suppressed LPS-induced expression of NF-κB/AP-1-target inflammatory genes. -- Abstract: Lonicerae flos extract (HS-23) is a clinical candidate currently undergoing Phase I trial in lipopolysaccharide (LPS)-injected healthy human volunteers, but its molecular basis remains to be defined. Here, we investigated protective effects of HS-23 or its major constituents on Escherichia coli LPS-induced septic mortality in mice. Intravenous treatment with HS-23 rescued LPS-intoxicated C57BL/6J mice under septic conditions, and decreased the levels of cytokines such as tumor necrosis factor α (TNF-α), interleukin (IL)-1β and high-mobility group box-1 (HMGB-1) in the blood. Chlorogenic acid (CGA) and its isomers were assigned as major constituents of HS-23 in the protection against endotoxemia. As a molecular mechanism, HS-23 or CGA isomers inhibited endotoxin LPS-induced autophosphorylation of the IL-1 receptor-associated kinase 4 (IRAK-4) in mouse peritoneal macrophages as well as the kinase activity of IRAK-4 in cell-free reactions. HS-23 consequently suppressed downstream pathways critical for LPS-induced activation of nuclear factor (NF)-κB or activating protein 1 (AP-1) in the peritoneal macrophages. HS-23 also inhibited various toll-like receptor agonists-induced nitric oxide (NO) production, and down-regulated LPS-induced expression of NF-κB/AP-1-target inflammatory genes in the cells. Taken together, HS-23 or CGA isomers exhibited anti-inflammatory therapy against LPS-induced septic mortality in mice, at least in part, mediated through the inhibition of IRAK-4.

60 APPLIED LIFE SCIENCES↗

Emergent electric field control of phase transformation in oxide superlattices

Electric fields can transform materials with respect to their structure and properties, enabling various applications ranging from batteries to spintronics. Recently electrolytic gating, which can generate large electric fields and voltage-driven ion transfer, has been identified as a powerful means to achieve electric-field-controlled phase transformations. The class of transition metal oxides provide many potential candidates that present a strong response under electrolytic gating. However, very few show a reversible structural transformation at room-temperature. Here, we report the realization of a digitally synthesized transition metal oxide that shows a reversible, electric-field-controlled transformation between distinct crystalline phases at room-temperature. In superlattices comprised of alternating one-unit-cell of SrIrO 3 and La 0.2 Sr 0.8 MnO 3 , we find a reversible phase transformation with a 7% lattice change and dramatic modulation in chemical, electronic, magnetic and optical properties, mediated by the reversible transfer of oxygen and hydrogen ions. Strikingly, this phase transformation is absent in the constituent oxides, solid solutions and larger period superlattices. Our findings open up this class of materials for voltage-controlled functionality.

36 MATERIALS SCIENCE↗

Halloysite Clay Nanotubes as Carriers for Curcumin: Characterization and Application

Halloysite is a nanostructured clay mineral with hollow tubular structure, which has recently found an important role as delivery system for drugs or other active molecules. One of these is curcumin, main constituent in the rhizome of the plant Curcuma Longa, with a series of useful pharmacological activities, hindered by its poor bioavalaibility and solubility in water. In this study, Halloysite clay nanotubes (HNTs) were characterized in terms of both structure and biocompatibility and they were used for curcumin delivery to cancer cells. The performed 3-(4, 5-dimethythiazol-2-yl)-2, 5-diphenyl-tetrazolium bromide (MTT) assay showed that HNTs have a high biocompatibility, also when coated with polymers, while curcumin is highly toxic for cancer cells. The release kinetics of curcumin from HNTs was investigated by the dialysis bag method, showing a slow and constant release of the drug, which can be further controlled by adding layers of polyelectrolytes to the external surface of the tubes. Successful polymer coating was followed by Zeta potential. The Trypan Blue assay showed a cytotoxic effect of loaded HNTs, proportional to the concentration of tubes and the incubation time. Successful HNTs uptake by breast cancer cells was demonstrated by Confocal Laser Scanning Microscopy images. All results indicate that HNTs are a promising carriers for polyphenol delivery and release.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Relativistic particle acceleration in plerions

We discuss recent research on the structure and particle acceleration properties of relativistic shock waves in which the magnetic field is transverse to the flow direction in the upstream medium, and whose composition is either pure electrons and positrons or primarily electrons and positrons with an admixture of heavy ions. Particle-in-cell simulation techniques as well as analytic theory have been used to show that such shocks in pure pair plasmas are fully thermalized -- the downstream particle spectra are relativistic Maxwellians at the temperature expected from the jump conditions. On the other hand, shocks containing heavy ions which are a minority constituent by number but which carry most of the energy density in the upstream medium do put approximately 20% of the flow energy into a nonthermal population of pairs downstream, whose distribution in energy space is N(E) varies as E(exp -2), where N(E)dE is the number of particles with energy between E and E+dE. The mechanism of thermalization and particle acceleration is found to be synchrotron maser activity in the shock front, stimulated by the quasi-coherent gyration of the whole particle population as the plasma flowing into the shock reflects from the magnetic field in the shock front. The synchrotron maser modes radiated by the heavy ions are absorbed by the pairs at their (relativistic) cyclotron frequencies, allowing the maximum energy achievable by the pairs to be gamma(sub +/-)m(sub +/-)c squared = m(sub i)c squared gamma(sub 1)/Z(sub i), where gamma(sub 1) is the Lorentz factor of the upstream flow and Z(sub i) is the atomic number of the ions. The shock's spatial structure is shown to contain a series of 'overshoots' in the magnetic field, regions where the gyrating heavy ions compress the magnetic field to levels in excess of the eventual downstream value. This shock model is applied to an interpretation of the structure of the inner regions of the Crab Nebula, in particular to the 'wisps,' surface brightness enhancements near the pulsar. We argue that these surface brightness enhancements are the regions of magnetic overshoot, which appear brighter because the small Larmor radius pairs are compressed and radiate more efficiently in the regions of more intense magnetic field. This interpretation suggests that the structure of the shock terminating the pulsar's wind in the Crab Nebula is spatially resolved, and allows one to measure gamma(sub 1) and a number of other properties of the pulsar's wind. We also discuss applications of the shock theory to the termination shocks of the winds from rotation-powered pulsars embedded in compact binaries. We show that this model adequately accounts for (and indeed predicted) the recently discovered X-ray flux from PSR 1957+20, and we discuss several other applications to other examples of these systems.

Arons, Jonathan↗