Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffractive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

HiSPoD : a program for high-speed polychromatic X-ray diffraction experiments and data analysis on polycrystalline samples

Here, a high-speed X-ray diffraction technique was recently developed at the 32-ID-B beamline of the Advanced Photon Source for studying highly dynamic, yet non-repeatable and irreversible, materials processes. In experiments, the microstructure evolution in a single material event is probed by recording a series of diffraction patterns with extremely short exposure time and high frame rate. Owing to the limited flux in a short pulse and the polychromatic nature of the incident X-rays, analysis of the diffraction data is challenging. Here, HiSPoD , a stand-alone Matlab-based software for analyzing the polychromatic X-ray diffraction data from polycrystalline samples, is described. With HiSPoD , researchers are able to perform diffraction peak indexing, extraction of one-dimensional intensity profiles by integrating a two-dimensional diffraction pattern, and, more importantly, quantitative numerical simulations to obtain precise sample structure information.

36 MATERIALS SCIENCE↗

A new theory for X-ray diffraction

By considering the scattering distributed throughout space, there is an intensity enhancement at the Bragg angle even when the Bragg condition is not satisfied. This leads to an alternative explanation for the diffraction from powders and small crystals. This article proposes a new theory of X-ray scattering that has particular relevance to powder diffraction. The underlying concept of this theory is that the scattering from a crystal or crystallite is distributed throughout space: this leads to the effect that enhanced scatter can be observed at the ‘Bragg position’ even if the ‘Bragg condition’ is not satisfied. The scatter from a single crystal or crystallite, in any fixed orientation, has the fascinating property of contributing simultaneously to many ‘Bragg positions’. It also explains why diffraction peaks are obtained from samples with very few crystallites, which cannot be explained with the conventional theory. The intensity ratios for an Si powder sample are predicted with greater accuracy and the temperature factors are more realistic. Another consequence is that this new theory predicts a reliability in the intensity measurements which agrees much more closely with experimental observations compared to conventional theory that is based on ‘Bragg-type’ scatter. The role of dynamical effects (extinction etc.) is discussed and how they are suppressed with diffuse scattering. An alternative explanation for the Lorentz factor is presented that is more general and based on the capture volume in diffraction space. This theory, when applied to the scattering from powders, will evaluate the full scattering profile, including peak widths and the ‘background’. The theory should provide an increased understanding of the reliability of powder diffraction measurements, and may also have wider implications for the analysis of powder diffraction data, by increasing the accuracy of intensities predicted from structural models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Detector Tilt Considerations in Bragg Coherent Diffraction Imaging: A Simulation Study

This paper addresses the three-dimensional signal distortion and image reconstruction issues in X-ray Bragg coherent diffraction imaging (BCDI) in the event of a general non-orthogonal orientation of the area detector with respect to the diffracted beam. Growing interest in novel BCDI adaptations at fourth-generation synchrotron light sources has necessitated improvisations in the experimental configuration and the subsequent data analysis. One such possibly unavoidable improvisation that is envisioned in this paper is a photon-counting area detector whose face is tilted away from the perpendicular to the Bragg-diffracted beam during the acquisition of the coherent diffraction signal. We describe a likely circumstance in which one would require such a detector configuration, along with the experimental precedent at third-generation synchrotrons. Using physically accurate diffraction simulations from synthetic scatterers in the presence of such tilted detectors, we analyze the general nature of the observed signal distortion qualitatively and quantitatively and provide a prescription to correct for it during image reconstruction. Our simulations and reconstructions are based on an adaptation of the known theory of BCDI sampling geometry, as well as the recently developed projection-based methods of wavefield propagation. Such configurational modifications and their numerical remedies are potentially valuable in realizing unconventional coherent diffraction measurement geometries, eventually paving the way for the integration of BCDI into new material characterization experiments at next-generation light sources.

36 MATERIALS SCIENCE↗

Nanoimprinted Diffraction Gratings for Light Trapping in Crystal-Silicon Film Photovoltaics

Crystal-silicon (c-Si) film photovoltaics hold the promise of combining the advantages of state-of-the-art wafer-silicon technology with the scalability and the inherently much lower cost of thin-film solar technologies. In the thickness range of 2-20 μm very effective light trapping is essential to absorb sufficient red and near-infrared (NIR) light and reach targeted efficiencies of 16% 18%, as defined by the U.S. National Solar Technology Roadmap. One proposed method is diffractive light trapping, which, at least in certain wavelength ranges, can theoretically outperform light trapping through random scattering at a rough surface or interface. The goals of this project were (1) to develop a nanoimprinting process for a high-refractive-index dielectric material, (2) to fabricate diffraction gratings as back-reflectors using this material, and (3) to demonstrate for a 2c-Si film an improvement in AM1.5 photon absorption of at least 80% relative to single-pass absorption. We achieved goals (1) and (2). We developed a soft-imprint method for sol-based titanium dioxide precursor films (index range 2.3-2.4) and integrated imprinted films in thin-film silicon devices. We did not fully reach goal (3): depending on the model used for interpretation of the optical experimental data, AM1.5 photon absorption was improved by only 53% (coherent electromagnetic model) to 66% (non-coherent ray-tracing model). When compared to a metallized flat reference film (double-pass absorption), the improvement due to the grating is only 6%, if the (more conservative) electromagnetic model is used. Other important achievements from this project were: • We perfected an imprinting method for another ceramic material, aluminum oxide phosphate, which is index-matched with glass. • We tested diffractive light trapping at different incidence angles and found positive evidence for light trapping for angles up to 50°, although the light-trapping efficiency decreased with increasing incidence angle. • The extent of the trapped wavelength range scales with the refractive index of the dielectric material. The full benefit of a high refractive index, however, is only achieved if the dielectric layer underneath the grating layer (the residual layer) is sufficiently thick (several 100 nm). For a very thin residual layer, the light wave is predominantly localized in the underlying material during diffraction, and this material's refractive index then determines the trapping range. The (welcomed) consequence is that if this material is the silicon absorber layer, e.g. in a thin-film superstrate configuration, a very large trapping range can be achieved even if a low-index dielectric is used. We tested this directly through light-trapping experiments in glass plates using two different imprinted dielectric materials, titanium dioxide (index range 2.3-2.4) and aluminum oxide phosphate (index 1.5), with thick and thin residual layers. • We tested both copper and aluminum as low-cost reflector alternatives to silver on the grating back sides. In the relevant wavelength range above 650 nm, copper not only has the same high reflectance as silver, but the diffraction efficiency is also on par with silver. • A total of five scientific publications resulting from this work have either been published or are in preparation for submission (see Detailed Technical Report, below). Two conference presentations were given. In conclusion, we successfully developed nanoimprinting techniques for two ceramic precursor materials and tested diffractive light trapping in c-Si and nc-Si:H thin-film devices. The measured amount of light trapping did not fully reach our target value. The lessons learned from this project, however, both concerning experimental techniques and theoretical/modeling methods, have been extensive. Light trapping remains a central issue in thin c-Si technology, and we recommend to the US Department of Energy to increase research in this important area.

14 SOLAR ENERGY↗

Microarcsecond relative astrometry from the ground with a diffractive pupil

The practical use of astrometry to detect exoplanets via the reflex motion of the parent star depends critically on the elimination of systematic floors in imaging systems. In the diffractive pupil technique proposed for space-based detection of exo-earths, extended diffraction spikes generated by a dotted primary mirror are referenced against a wide-field grid of background stars to calibrate changing optical distortion and achieve microarcsecond astrometric precision on bright targets (Guyon et al. 2010). We describe applications of this concept to ground-based uncrowded astrometry using a diffractive, monopupil telescope and a wide-field camera to image as many as {approx}4000 background reference stars. Final relative astrometric precision is limited by differential tip/tilt jitter caused by high altitude layers of turbulence. A diffractive 3-meter telescope is capable of reaching {approx}35 {micro}as relative astrometric error per coordinate perpendicular to the zenith vector in three hours on a bright target star (I < 10) in fields of moderate stellar density ({approx}40 stars arcmin{sup -2} with I < 23). Smaller diffractive apertures (D < 1 m) can achieve 100-200 {micro}as performance with the same stellar density and exposure time and a large telescope (6.5-10 m) could achieve as low as 10 {micro}as, nearly an order of magnitude better than current space-based facilities. The diffractive pupil enables the use of larger fields of view through calibration of changing optical distortion as well as brighter target stars (V < 6) by preventing star saturation. Permitting the sky to naturally roll to average signals over many thousands of pixels can mitigate the effects of detector imperfections.

79 ASTRONOMY AND ASTROPHYSICS↗

Order-disorder phase transformations in quaternary pyrochlore oxide system: Investigated by X-ray diffraction, transmission electron microscopy and Raman spectroscopic techniques

Order-disorder transformations in a quaternary pyrochlore oxide system, Ca-Y-Zr-Ta-O, were studied by powder X-ray diffraction (XRD) method, transmission electron microscope (TEM) and FT-NIR Raman spectroscopic techniques. The solid solutions in different ratios, 4:1, 2:1, 1:1, 1:2, 1:4, 1:6, of CaTaO{sub 3.5} and YZrO{sub 3.5} were prepared by the conventional high temperature ceramic route. The XRD results and Rietveld analysis revealed that the crystal structure changed from an ordered pyrochlore structure to a disordered defect fluorite structure as the ratios of the solid solutions of CaTaO{sub 3.5} and YZrO{sub 3.5} were changed from 4:1 to 1:4. This structural transformation in the present system is attributed to the lowering of the average cation radius ratio, r{sub A}/r{sub B} as a result of progressive and simultaneous substitution of larger cation Ca{sup 2+} for Y{sup 3+} at A sites and smaller cation Ta{sup 5+} for Zr{sup 4+} at B sites. Raman spectroscopy and TEM analysis corroborated the XRD results. - Graphical abstract: Selected area electron diffraction (SAED) patterns showed highly ordered diffraction maxima with characteristic superlattice weak diffraction spots of the pyrochlore structure for (a) Ca{sub 0.6}7Y{sub 1.33}Zr{sub 1.33}Ta{sub 0.33}O{sub 7} (C2YZT2) and bright diffraction maxima arranged in a ring pattern of the fluorite structure for (b) Ca{sub 0.29}7Y{sub 1.71}Zr{sub 1.71}Ta{sub 0.29}O{sub 7} (CY6Z6T).

36 MATERIALS SCIENCE↗

Neutron diffraction study of La[subscript 4]LiAuO[subscript 8]: Understanding Au[superscript 3+] in an oxide environment

Owing to gold's oxophobicity, its oxide chemistry is rather limited, and elevated oxygen pressures are usually required to prepare ternary and quaternary oxide compounds with gold ions. The Au{sup 3+} oxide, La{sub 4}LiAuO{sub 8}, is remarkable both because it can be prepared at ambient pressure in air, and because of its unusual stability toward thermal decomposition and reduction. The structure of La{sub 4}LiAuO{sub 8} was established by Pietzuch et al. using single crystal X-ray diffraction [1]. The compound adopts an ordered modification of the Nd{sub 2}CuO{sub 4} structure, containing two-dimensional sheets in which AuO{sub 4} square planes are separated from one another by LiO{sub 4} square planes. In light of the meager X-ray scattering factors of Li and O, relative to La and Au, we report here a neutron powder diffraction study of La{sub 4}LiAuO{sub 8}, definitively confirming the structure. To our knowledge, this is the first reported neutron diffraction study of any stoichiometric oxide compound of gold. X-N maps, which make use of nuclear positions obtained from Rietveld refinement of time-of-flight neutron diffraction data and electron densities obtained from synchrotron X-ray powder diffraction data, point to the highly covalent nature of the Au-O bonding in La{sub 4}LiAuO{sub 8}. This is in good agreement with charge densities and Bader charges obtained from full density functional relaxation of the structure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Modeling and experimental validation of dynamical effects in Bragg coherent x-ray diffractive imaging of finite crystals

Bragg coherent diffractive imaging (BCDI) is a noninvasive microscopy technique that can visualize the shape and internal lattice deviations of crystals with nanoscale spatial resolution and picometer deformation sensitivity. Its strain imaging capability relies on Fourier transform–based iterative phase retrieval algorithms, which are mostly developed under the kinematical approximation. Such approximation prohibits the application of BCDI on larger crystals, which are commonly seen in most emerging functional materials. Understanding the dynamical effect in BCDI, as well as developing a validated method for modeling BCDI at the dynamical diffraction limit, is crucial for applying BCDI to hierarchical systems that contain micron-sized crystals and grains. Thus we report a comparative study on the impact of dynamical diffraction effects by comparing the reconstruction results from two measurements of the same crystal. Forward simulation is implemented to show subtle changes of interference fringes in the diffraction pattern due to the dynamical diffraction, and is compared directly with the experimental data.

36 MATERIALS SCIENCE↗

TMD factorisation for diffractive jets in photon-nucleus interactions

Abstract Using the colour dipole picture and the colour glass condensate effective theory, we study the diffractive production of two or three jets via coherent photon-nucleus interactions at high energy. We consider the hard regime where the photon virtuality and/or the transverse momenta of the produced jets are much larger than the saturation momentumQ s of the nuclear target. We show that, despite this hardness, the leading-twist contributions are controlled by relatively large parton configurations, with transverse sizesR~ 1/Q s , which undergo strong scattering and probe gluon saturation. We demonstrate that these leading-twist contributions admit transverse-momentum dependent (TMD) factorisation, in terms of quark and gluon diffractive TMD distribution functions, for which we obtain explicit expressions from first principles. We go beyond our previous work by evaluating the contributions involving the quark diffractive distributions and by establishing that their DGLAP evolution emerges via controlled calculations within the colour dipole picture. We find the same expression for the quark diffractive TMD in two different processes (semi-inclusive diffraction and the diffractive production of quark-gluon dijets), thus demonstrating its universality.

Physics↗

Phase Identification in Synchrotron X-ray Diffraction Patterns of Ti–6Al–4V Using Computer Vision and Deep Learning

X-ray diffraction patterns contain information about the atomistic structure and microstructure (defect population) of materials, extracting detailed information from diffraction patterns is complex, demanding and relies on prior knowledge. Here, we hypothesize that deep-learning techniques can help to perform an effective and accurate analysis with high throughput rates. To demonstrate this concept, we applied a novel deep learning framework to determine the evolution of the β-phase volume fraction in a Ti–6Al–4V alloy during heat-treatment from video sequences of 2D diffraction patterns recorded in transmission and with highly monochromatic radiation in a synchrotron beamline. In particular, we studied the impact of network design on prediction reliability and computational performance. Networks of different architectures were trained using 3008 experimental 2D patterns. A well-tuned model was found to reproduce the phase fractions of another experimental data set, consisting of 1100 diffraction patterns, with a mean-square error as small as 2.6 x 10 -4 . The average prediction error of β-phase volume fraction was within 1.6 x 10 -2 (in each diffraction pattern) of the values obtained by conventional methods. Our work demonstrates that convolutional neural networks can evaluate high energy X-ray diffraction patterns with a remarkable level of reliability. Furthermore, it demonstrates the significance of network design on the reliability of predictions and computational performance. The most complex models do not necessarily result in highest accuracy and may even fail to learn from the data.

36 MATERIALS SCIENCE↗

Unsupervised anomaly detection in MeV ultrafast electron diffraction

MeV ultrafast electron diffraction (MUED) is a pump-probe technique used to study the dynamic structural evolution of materials. An ultrashort laser pulse triggers structural changes, which are then probed by an ultrashort relativistic electron beam. To overcome low signal-to-noise ratios, diffraction patterns are averaged over thousands of shots. However, shot-to-shot instabilities in the electron beam can distort individual patterns, introducing uncertainty. Improving MUED accuracy requires detecting and removing these anomalous patterns from large datasets. In this work, we developed a fully unsupervised methodology for the detection of anomalous diffraction patterns. Using a convolutional autoencoder, we calculate the reconstruction mean squared error of the diffraction patterns. Based on the statistical analysis of this error, we provide the user an estimation of the probability that the pattern is normal, which also allows a posterior visual inspection of the images that are difficult to classify. This method has been trained with only 100 diffraction patterns and tested on 1521 patterns, resulting in a false positive rate between 0.2% and 0.4%, with a training time of 10 s per image and a test time of about 1 s per image. Here, the proposed methodology can also be applied to other diffraction techniques in which large datasets are collected that include faulty images due to instrumental instabilities.

43 PARTICLE ACCELERATORS↗

Nonlinear encoding in diffractive information processing using linear optical materials

Nonlinear encoding of optical information can be achieved using various forms of data representation. Here, we analyze the performances of different nonlinear information encoding strategies that can be employed in diffractive optical processors based on linear materials and shed light on their utility and performance gaps compared to the state-of-the-art digital deep neural networks. For a comprehensive evaluation, we used different datasets to compare the statistical inference performance of simpler-to-implement nonlinear encoding strategies that involve, e.g., phase encoding, against data repetition-based nonlinear encoding strategies. We show that data repetition within a diffractive volume (e.g., through an optical cavity or cascaded introduction of the input data) causes the loss of the universal linear transformation capability of a diffractive optical processor. Therefore, data repetition-based diffractive blocks cannot provide optical analogs to fully connected or convolutional layers commonly employed in digital neural networks. However, they can still be effectively trained for specific inference tasks and achieve enhanced accuracy, benefiting from the nonlinear encoding of the input information. Our results also reveal that phase encoding of input information without data repetition provides a simpler nonlinear encoding strategy with comparable statistical inference accuracy to data repetition-based diffractive processors. Our analyses and conclusions would be of broad interest to explore the push-pull relationship between linear material-based diffractive optical systems and nonlinear encoding strategies in visual information processors.

42 ENGINEERING↗

X-ray diffraction under grazing incidence conditions

Material properties frequently relate to structures at or near surfaces, particularly in thin films. As a result, it is essential to understand these structures at the molecular and atomistic levels. The most accurate and widely used techniques for characterizing crystallographic order are based on X-ray diffraction. When dealing with thin films or interfaces, standard approaches, such as single crystal or powder diffraction, are not suitable. However, X-ray diffraction under grazing incidence conditions can provide the required information. Here, in this Primer, grazing incidence X-ray diffraction (GIXD) is comprehensively introduced, starting from basic considerations on X-ray diffraction at crystals with reduced dimensionality and the optical properties of X-rays, followed by a more in-depth description of an experimental performance, including X-ray sources, goniometers and detectors. Experimental errors, limitations and reproducibility are discussed. Various applications, from highly ordered inorganic single crystal surfaces to weakly ordered polymer thin films, are presented to illustrate the potential of GIXD. Data visualizations, representations and evaluation strategies are summarized, based on the example of anthracene thin films. The Primer compiles information relevant to perform high-quality GIXD experiments, evaluate data and interpret results, to extend knowledge about X-ray diffraction from surfaces, interfaces and thin films.

36 MATERIALS SCIENCE↗

Strong-field induced fragmentation and isomerization of toluene probed by ultrafast femtosecond electron diffraction and mass spectrometry

We investigate the fragmentation and isomerization of toluene molecules induced by strong-field ionization with a femtosecond near-infrared laser pulse. Momentum-resolved coincidence time-of-flight ion mass spectrometry is used to determine the relative yield of different ionic products and fragmentation channels as a function of laser intensity. Ultrafast electron diffraction is used to capture the structure of the ions formed on a picosecond time scale by comparing the diffraction signal with theoretical predictions. Through the combination of the two measurements and theory, we are able to determine the main fragmentation channels and to distinguish between ions with identical mass but different structures. In addition, our diffraction measurements show that the independent atom model, which is widely used to analyze electron diffraction patterns, is not a good approximation for diffraction from ions. Here, we show that the diffraction data is in very good agreement with ab initio scattering calculations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Study of self-diffraction from laser generated plasma gratings in the nanosecond regime

We investigate the formation and diffraction efficiency of plasma gratings generated by the interference of two laser beams crossing at a small angle on the surface of a planar aluminum target. Such gratings were observed during National Ignition Facility experiments with the ratio of energy in the first-order to zeroth order of ≈60%. Recently, additional experiments were performed on the Optical Sciences Laser. These experiments with only two interfering beams showed high normalized energy (ratio of energy in diffracted order to zeroth order) of approximately 10% and 3% at the first and second diffracted order locations, respectively, for intensities less than 1012 W/cm2. The existence of the higher-orders is the characteristic of diffraction from gratings in the Raman-Nath as opposed to the Bragg regime. In addition, we show conical diffraction from the generated plasma grating. Using numerical simulations, we explore the large difference in diffraction efficiency observed in these two experiments and highlight the role of plasma temperature and density scale length. The simulations suggest a modulation depth of the plasma grating refractive index ranging from 1.77×10-4 to 3.5×10-2. These results are relevant to Inertial Confinement Fusion experiments or plasma photonics applications of gratings in high-field laser-physics and high-energy density science, specifically in the nanosecond regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Selected topics in diffraction with protons and nuclei: past, present, and future

Here, we review a broad range of phenomena in diffraction in the context of hadron–hadron, hadron–nucleus collisions and deep inelastic lepton–proton/nucleus scattering focusing on the interplay between the perturbative QCD and non-perturbative models. We discuss inclusive diffraction in DIS, phenomenology of dipole models, resummation and parton saturation at low x , hard diffractive production of vector mesons, inelastic diffraction in hadron–hadron scattering, formalism of color fluctuations, inclusive coherent and incoherent diffraction as well as soft and hard diffraction phenomena in hadron–hadron/nucleus and photon–nucleus collisions. For each topic we review key results from the past and present experiments including HERA and the LHC. Finally, we identify the remaining open questions, which could be addressed in the continuing experiments, in particular in photon-induced reactions at the LHC and the future electron–ion collider in the US, large hadron electron collider and future circular collider at CERN.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Coherent and incoherent diffractive hadron production in pA collisions and gluon saturation

We study coherent and incoherent diffractive hadron production in high-energy quarkonium-heavy nucleus collisions as a probe of the gluon saturation regime of quantum chromodynamics. Taking this process as a model for pA collisions, we argue that the coherent diffractive gluon production, in which the target nucleus stays intact, exhibits a remarkable sensitivity to the energy, rapidity, and atomic number dependence. The incoherent diffractive gluon production is less sensitive to the details of the low-x dynamics but can serve as a probe of fluctuations in the color glass condensate. As a quantitative measure of the nuclear effects on diffractive hadron production we introduce a new observable--the diffractive nuclear modification factor. We discuss possible signatures of gluon saturation in diffractive gluon production at the Relativistic Heavy Ion Collider, the Large Hadron Collider, and Electron Ion Collider.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Reconstruction from a single diffraction pattern of azimuthally projected electron density of molecules aligned parallel to a single axis.

Diffraction from the individual molecules of a molecular beam, aligned parallel to a single axis by a strong electric field or other means, has been proposed as a means of structure determination of individual molecules. As in fiber diffraction, all the information extractable is contained in a diffraction pattern from incidence of the diffracting beam normal to the molecular alignment axis. The limited size of the object results in continuous diffraction patterns characterized by neither Bragg spots nor layer lines. Equations relating the scattered amplitudes to the molecular electron density may be conveniently formulated in terms of cylindrical harmonics. For simulated diffraction patterns from short C nanotubes aligned along their axes, iterative solution of the equation for the zeroth-order cylindrical harmonic and its inverse with appropriate constraints in real and reciprocal space enables the phasing of the measured amplitudes, and hence a reconstruction of the azimuthal projection of the molecule.

36 MATERIALS SCIENCE↗