Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dimensional analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Full Navier-Stokes analysis of a two-dimensional mixer/ejector nozzle for noise suppression

A three-dimensional full Navier-Stokes (FNS) analysis was performed on a mixer/ejector nozzle designed to reduce the jet noise created at takeoff by a future supersonic transport. The PARC3D computational fluid dynamics (CFD) code was used to study the flow field of the nozzle. The grid that was used in the analysis consisted of approximately 900,000 node points contained in eight grid blocks. Two nozzle configurations were studied: a constant area mixing section and a diverging mixing section. Data are presented for predictions of pressure, velocity, and total temperature distributions and for evaluations of internal performance and mixing effectiveness. The analysis provided good insight into the behavior of the flow.

Debonis, James R.↗
NASA NTRS1992

Full Navier-Stokes analysis of a two-dimensional mixer/ejector nozzle for noise suppression

A three-dimensional full Navier-Stokes (FNS) analysis was performed on a mixer/ejector nozzle designed to reduce the jet noise created at takeoff by a future supersonic transport. The PARC3D computational fluid dynamics (CFD) code was used to study the flow field of the nozzle. The grid that was used in the analysis consisted of approximately 900,000 node points contained in eight grid blocks. Two nozzle configurations were studied: a constant area mixing section and a diverging mixing section. Data are presented for predictions of pressure, velocity, and total temperature distributions and for evaluations of internal performance and mixing effectiveness. The analysis provided good insight into the behavior of the flow.

Debonis, James R.↗
NASA NTRS1998

Eigenmode Analysis of Boundary Conditions for One-Dimensional Preconditioned Euler Equations

An analysis of the effect of local preconditioning on boundary conditions for the subsonic, one-dimensional Euler equations is presented. Decay rates for the eigenmodes of the initial boundary value problem are determined for different boundary conditions. Riemann invariant boundary conditions based on the unpreconditioned Euler equations are shown to be reflective with preconditioning, and, at low Mach numbers, disturbances do not decay. Other boundary conditions are investigated which are non-reflective with preconditioning and numerical results are presented confirming the analysis.

Darmofal, David L.↗
NASA NTRS1973

Finite Element Method for Thermal Analysis

A two- and three-dimensional, finite-element thermal-analysis program which handles conduction with internal heat generation, convection, radiation, specified flux, and specified temperature boundary conditions is presented. Elements used in the program are the triangle and tetrahedron for two- and three-dimensional analysis, respectively. The theory used in the program is developed, and several sample problems demonstrating the capability and reliability of the program are presented. A guide to using the program, description of the input cards, and program listing are included.

Heuser, J.↗
NASA NTRS1989

A further study of cumulus interactions and mergers - Three-dimensional simulations with trajectory analysis

Cumulus processes involved in the interaction and merging of clouds under the influence of different imposed conditions (including large-scale lifting forcing, environmental wind shear, and cloud microphysical processes) were studied using simulations with a three-dimensional model. The design of the study was to generate several convective clouds randomly inside the model domain, and then to observe and analyze the interactions and merging between the simulated clouds. Ten merged clouds were identified. Seven of these, each involving two previously separated clouds, generally lie along a line parallel to the initial environmental wind shear vector, while one (also a two-cloud system) lies along a line perpendicular to the wind shear vector prior to merging. The remaining two merging systems involve three parent clouds each; they are a combination of parallel and perpendicular cells. The merging mechanisms associated with three-cloud merging cases are studied by examining the temperature, pressure, and wind fields prior to, during, and following the merging.

Tao, Wei-Kuo↗
NASA NTRS1977

A three-dimensional viscous/potential flow interaction analysis method for multi-element wings

An analysis method and computer program were developed for the calculation of the viscosity dependent aerodynamic characteristics of multi-element, finite wings in incompressible flow. A fully-three dimensional potential flow program is used to determine the inviscid pressure distribution about the configuration. The potential flow program uses surface source and vortex singularities to represent the inviscid flow. The method is capable of analysing configurations having at most one slat, a main element, and two slotted flaps. Configurations are limited to full span slats or flaps. The configuration wake is allowed to relax as a force free wake, although roll up is not allowed at this time. Once the inviscid pressure distribution is calculated, a series of boundary layer computations are made along streamwise strips.

Dvorak, F. A.↗
NASA NTRS1990

Three-dimensional stress intensity factor analysis of a surface crack in a high-speed bearing

The boundary element method is applied to calculate the stress intensity factors of a surface crack in the rotating inner raceway of a high-speed roller bearing. The three-dimensional model consists of an axially stressed surface cracked plate subjected to a moving Hertzian contact loading. A multidomain formulation and singular crack-tip elements were employed to calculate the stress intensity factors accurately and efficiently for a wide range of configuration parameters. The results can provide the basis for crack growth calculations and fatigue life predictions of high-performance rolling element bearings that are used in aircraft engines.

Ballarini, Roberto↗
NASA NTRS1979

Analysis of cracked orthotropic sheets

Computer program performs two dimensional elastostatic analysis of plane anisotropic homogeneous sheets with through-the-thickness cracks and temperature gradients.

Aberson, J. A.↗
NASA NTRS1993

Contact stress analysis of spiral bevel gears using nonlinear finite element static analysis

A procedure is presented for performing three-dimensional stress analysis of spiral bevel gears in mesh using the finite element method. The procedure involves generating a finite element model by solving equations that identify tooth surface coordinates. Coordinate transformations are used to orientate the gear and pinion for gear meshing. Contact boundary conditions are simulated with gap elements. A solution technique for correct orientation of the gap elements is given. Example models and results are presented.

Bibel, G. D.↗
NASA NTRS1993

Contact stress analysis of spiral bevel gears using nonlinear finite element static analysis

A procedure is presented for performing three-dimensional stress analysis of spiral bevel gears in mesh using the finite element method. The procedure involves generating a finite element model by solving equations that identify tooth surface coordinates. Coordinate transformations are used to orientate the gear and pinion for gear meshing. Contact boundary conditions are simulated with gap elements. A solution technique for correct orientation of the gap elements is given. Example models and results are presented.

Bibel, G. D.↗
NASA NTRS1995

Contact Stress Analysis of Spiral Bevel Gears Using Finite Element Analysis

A procedure is presented for performing three-dimensional stress analysis of spiral bevel gears in mesh using the finite element method. The procedure involves generating a finite element model by solving equations that identify tooth surface coordinates. Coordinate transformations are used to orientate the gear and pinion for gear meshing. Contact boundary conditions are simulated with gap elements. A solution technique for correct orientation of the gap elements is given. Example models and results are presented.

Bibel, G. D.↗
NASA NTRS1993

Three-dimensional Navier-Stokes analysis and redesign of an imbedded bellmouth nozzle in a turbine cascade inlet section

Verification of proposed turbopump blading performance will involve evaluation of candidate blades in cascade test facilities. It is necessary to be able to predict the flow fields within these cascades for the results to be applicable to actual engine environments. This work presents the results of a study to predict the flow field for the NASA Lewis Transonic Turbine Blade Cascade Facility, which is similar to those used to evaluate rocket propulsion turbines. A pitchwise nonuniform total pressure distribution was observed at the blade row leading edge plane. A CFD analysis was used to show that the cause of the flow nonuniformity was a pair of vortices that originated in an embedded bellmouth inlet. Further CFD analysis was used to verify that a redesigned inlet section resulted in a flow with acceptable uniformity. A computational analysis was chosen because physical accessibility to the inlet section was limited, and because a computational approach also allows one to examine design changes cheaper and more quickly than an experimental approach would. The PARC code, a general purpose, three-dimensional, Navier-Stokes code with multiblock solution capability, was chosen for the present study. Results are presented detailing the computational requirements needed to accurately predict flows of this nature. Calculations of the original geometry showed total pressure loss regions consistent in strength and in location to experimental measurements. An examination of the results shows that the distortions are caused by a pair of vortices that originate as a result of the interaction of the flow with the imbedded bellmouth. Computations were performed for an inlet geometry which eliminated the imbedded bellmouth by bridging the region between it and the upstream wall. This analysis indicated that eliminating the imbedded bellmouth eliminates the troublesome pair of vortices, resulting in a flow with much greater pitchwise uniformity.

Giel, P. W.↗
NASA NTRS1986

Three-dimensional inviscid flow in mixers. II - Analysis of turbofan forced mixers

A small disturbance formulation for the three-dimensional potential analysis of the inviscid flow over a turbofan forced mixer configuration in which the governing equations are reduced by means of a flux volume formulation along a Cartesian grid is presently extended to include the effects of power addition within the potential formulation. Calculations are presented for practical turbofan mixer designs, and comparison calculations are also given with measured surface pressure distributions and measured axial velocity profiles.

Barber, T. J.↗
NASA NTRS1974

Gate-controlled-diodes in silicon-on-sapphire: A computer simulation

The computer simulation of the electrical behavior of a Gate-Controlled Diode (GCD) fabricated in Silicon-On-Sapphire (SOS) was described. A procedure for determining lifetime profiles from capacitance and reverse current measurements on the GCD was established. Chapter 1 discusses the SOS structure and points out the need of lifetime profiles to assist in device design for GCD's and bipolar transistors. Chapter 2 presents the one-dimensional analytical formula for electrostatic analysis of the SOS-GCD which are useful for data interpretation and setting boundary conditions on a simplified two-dimensional analysis. Chapter 3 gives the results of a two-dimensional analysis which treats the field as one-dimensional until the silicon film is depleted and the field penetrates the sapphire substrate. Chapter 4 describes a more complete two-dimensional model and gives results of programs implementing the model.

Gassaway, J. D.↗
NASA NTRS1990

Inelastic transient dynamic analysis of three-dimensional problems by BEM

A general direct boundary element formulation and its numerical implementation for solving transient dynamic problems of three-dimensional isotropic homogeneous or piecewise homogeneous solids involving material nonlinearities are presented. The algorithm produces accurate results for static nonlinear problems by using large time steps. When a large value of yield stress is selected, the incremental inelastic transient algorithm produces results identical to those obtained by elastodynamic analysis.

Ahmad, S.↗
NASA NTRS1993

Three-dimensional finite element progressive failure analysis of composite laminates under axial extension

A three-dimensional (3D) progressive failure algorithm is developed, where the layerwise laminate theory (LWLT) of Reddy is used for kinematic description. The finite element model based on the layerwise theory predicts both inplane and interlaminar stresses with the same accuracy as that of a conventional 3D finite element model and provides a convenient format for modeling the 3D stress fields in composite laminates. A parametric study is conducted to investigate the effect of out-of-plane material properties, 3D stiffness reduction methods, and boundary conditions on the failure loads and strains of a composite laminate under axial extension. The results indicate that different parameters have a different degree of influence on the failure loads and strains. The predictive ability of various phenomenological failure criteria is evaluated in the light of experimental results available in the literature, and the predictions of the LWLT are compared with those of the first-order shear deformation theory. It is concluded that a 3D stress analysis is necessary to predict accurately the failure behavior of composite laminates.

Reddy, Yeruva S.↗
NASA NTRS1973

A provisional analysis of two-dimensional turbulent mixing with variable density

A predictive method for the titled flows based on the Prandtl energy method was developed and assessed by comparing predicted results with experimental results. For constant-density flows, both gross properties such as spreading rate and maximum turbulent kinetic energy and detailed properties such as mean shear stress distributions are shown to be well predicted. For variable-density flows, considerable attention is devoted to the inclusion in the analysis of the added effect of pressure fluctuations and of the variation in the several extant empirical parameters on the turbulent kinetic energy. It is found that a variation with Mach number of the characteristic Reynolds number for turbulent transport is needed to account for the observed decrease in spreading rate. The predictions which result from these considerations are compared with the limited experimental data presently available for the two crucial cases: compressible adiabatic mixing and low-speed isothermal mixing of two dissimilar gases.

Libby, P. A.↗