Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Acoustic and electrical properties of Fe-Ti oxides with application to the deep lunar mantle

The overturn of titanium-rich mantle cumulates has been invoked to explain the structure and dynamics of the Moon. These dense cumulates are stable at the core-mantle boundary (CMB) and could explain field observations inferred from geophysical studies. Here, we report acoustic and electrical experiments on natural ilmenite-rutile aggregates up to 4.5 GPa and 1920 K. Seismic velocities show a weak pressure and temperature dependence, with Vs ~ 4.2 (+/-0.2) km/s and Vp ~8.0 (+/-0.2) km/s at the CMB conditions. Conductivity increases by a factor of 10 4 from 373 to 1920 K and is >10(3) S/m above 1573 K. Seismic and electrical models for the lunar mantle based on our results, considering mixtures of Fe-Ti oxides and olivine, indicate that field velocity and conductivity estimates are reproduced satisfactorily with 3-16 vol.% Fe-Ti oxides and 20 vol.% melt. Interactions between a Ti-rich, melt-bearing layer and the adjacent core likely affect the cooling and magnetic history of the Moon.

58 GEOSCIENCES↗

Texture Manipulation and Its Impact on Electrical Properties of Zinc Phosphide Thin Films

Both randomly oriented and highly (220) textured thin films of zinc phosphide (Zn3P2) were grown by the close-space sublimation method. The effect of deposition parameters, such as pressure and substrate temperature, on the texture evolution has been established. It was found that the deposition temperature plays a dominant role in determining the preferred orientation whereas the ambient pressure (below 10 Torr) does not greatly affect the film texture. We further found that the microstrain changes from tensile at lower deposition temperatures to compressive at higher deposition temperatures. The preferred orientation also had a strong impact on the electrical resistivity of the films. The results provide guidance on the selection of substrate and deposition parameters to grow Zn3P2 thin films with desirable properties.

14 SOLAR ENERGY↗

Synthesis of CdS Nanoparticles by Hydrothermal Method and Their Effects on the Electrical Properties of Bi-based Superconductors

Cadmium sulfide (CdS) nanoparticles were synthesized by hydrothermal process and have been characterized by x-ray diffraction (XRD), transmission electron microscopy (TEM), and energy-dispersive x-ray spectroscopy (EDXS) system. The effect of added CdS nanoparticles on the superconducting properties and flux pinning capability in (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub y} system (denoted as (Bi,Pb)-2223) has been reported. Hydrothermal method is an effective route to synthesize CdS nanoparticles with good crystallinity and having average grain size of about 12 nm. Then, small amounts (0–0.4 wt%) of nanosized CdS particles were added to Bi-2233 samples using a solid-state reaction route. The transport critical current densities and the electrical resistivity ρ(T, H) were performed using the four-probe technique. The results show that samples sintered by small amount of CdS nanoparticles (≤ 0.3 wt%) exhibit the higher critical current densities and energy pinning in applied magnetic fields compared to free added sample. Consequently, the addition of CdS could introduce effective pinning centers which account for the improvement in superconducting properties in the Bi-2223 materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical properties of dry rocks

The mechanism by which atmospheric moisture affects the conductivity and dielectric constant of rock specimens was studied in time and frequency domains. It is suggested that adsorbed water molecules alter the surface conductivity in a manner similar to that observed in semiconductors and insulators. Powdered basalts show a low-frequency dispersion produced by the atmospheric moisture remaining in the pore system of the sample in a high vacuum; this effect is attributed to isolated adsorption centers. Simulated lunar permafrost at 100 K and a vacuum of 10 to the -8th power torr together with data on lunar samples contaminated with atmospheric moisture and the dielectric properties of ice at various temperatures indicate that, if permafrost exists in the moon it should present a relaxation peak at approximately 300 Hz; for temperatures up to 263 K it may go up to 20 KHz. It is concluded that in order to have electrical steady state conditions in rock samples it is necessary to have volume charge accumulations at interfaces within the sample and at the electrode sample interface. A method for measuring heterogeneous dielectrics with non-negligible ohmic and dielectric conductivities is proposed and experimentally verified.

Morrison, H.↗

Characterization of electrical properties in axial Si-Ge nanowire heterojunctions using off-axis electron holography and atom-probe tomography

Doped Si-Ge nanowire (NW) heterojunctions were grown using the vapor-liquid-solid method with AuGa and Au catalyst particles. Transmission electron microscopy and off-axis electron holography (EH) were used to characterize the nanostructure and to measure the electrostatic potential profile across the junction resulting from electrically active dopants, while atom-probe tomography (APT) was used to determine the Si, Ge and total (active and inactive) dopant concentration profiles. A comparison of the measured potential profile with simulations indicated that Ga dopants unintentionally introduced during AuGa catalyst growth were electronically inactive despite APT results that showed considerable amounts of Ga in the Si region. 10% P in Ge and 100% B in Si were estimated to be activated, which was corroborated by in situ electron-holography biasing experiments. This combination of EH, APT, in situ biasing and simulations allows a better knowledge and understanding of the electrically active dopant distributions in NWs.

36 MATERIALS SCIENCE↗

Electrical properties of epitaxial SrTiO{sub 3} tunnel barriers on (001) Pt/SrTiO{sub 3} substrates

Coherent, epitaxial Pt films with root-mean-square surface roughness values of less than one unit cell were grown on (001) SrTiO{sub 3} substrates by dc sputtering. These Pt films served as bottom electrodes for epitaxial SrTiO{sub 3} tunnel barriers grown by rf magnetron sputtering. The SrTiO{sub 3} barriers were free of pinholes and showed mean surface roughness values of less than one unit cell. Barriers with a thickness of 4.5 nm showed excellent insulating properties and nonlinear current-voltage characteristics. At high bias fields, a reproducible hysteresis and deviation from the ideal tunneling behavior were observed.

36 MATERIALS SCIENCE↗

Effect of LiAlO{sub 2} nanoparticle filler concentration on the electrical properties of PEO–LiClO{sub 4} composite

Highlights: ► Structural modification of nano LiAlO{sub 2} filler increased conductivity. ► Good ionic conductivity for (LiAlO{sub 2}){sub 1.5}(PEO){sub 11}(LiClO{sub 4}) at room temperature. ► Nano LiAlO{sub 2} filler enhanced both ion migration and orientation. ► High dielectric properties for (LiAlO{sub 2}){sub 1.5}(PEO){sub 11}(LiClO{sub 4}) at room temperature. - Abstract: Nano-composite polymer electrolytes are receiving attention as potential candidates to be used as electrolyte membranes in lithium polymer batteries and other devices. In this work, polyethylene oxide–LiClO{sub 4} based composite polymer electrolyte was prepared by solution casting method. The effect of LiAlO{sub 2} nanoparticle ceramic filler concentration on the structure and electrical conduction of the composite was studied. Nano-LiAlO{sub 2} was synthesized by sol–gel method. The samples were characterized using X-ray diffraction, Fourier Transmission-Infra Red, Differential Scanning Calorimetry, and tested by dielectric properties, Direct and Alternating current measurements as well as by impedance spectroscopy. All samples showed a behavior referring to an ionic conduction. Generally, the melting temperature of the polymer electrolyte decreased with filler concentration. Both thermal property and filler concentration influenced conductivity value. At room temperature, the highest ionic conductivity was 9.76 × 10{sup −5} ohm{sup −1} cm{sup −1} for sample with a composition of (LiAlO{sub 2}){sub 1.5}(polyethylene oxide){sub 11}(LiClO{sub 4}). All results were correlated and discussed.

36 MATERIALS SCIENCE↗

Surface Morphology and Electrical Properties of Cu 3 BTC 2 Thin Films Before and After Reaction with TCNQ

HKUST-1 or Cu 3 BTC 2 (BTC = 1,3,5-benzenetricarboxylate) is a prototypical metal–organic framework (MOF) that holds a privileged position among MOFs for device applications, as it can be deposited as thin films on various substrates and surfaces. Recently, new potential applications in electronics have emerged for this material when HKUST-1 was demonstrated to become electrically conductive upon infiltration with 7,7,8,8-tetracyanoquinodimethane (TCNQ). However, the factors that control the morphology and reactivity of the thin films are unknown. Here, we present a study of the thin-film growth process on indium tin oxide and amorphous Si prior to infiltration. From the unusual bimodal, non-log-normal distribution of crystal domain sizes, we conclude that the nucleation of new layers of Cu 3 BTC 2 is greatly enhanced by surface defects and thus difficult to control. We then show that these films can react with methanolic TCNQ solutions to form dense films of the coordination polymer Cu(TCNQ). This chemical conversion is accompanied by dramatic changes in surface morphology, from a surface dominated by truncated octahedra to randomly oriented thin platelets. The change in morphology suggests that the chemical reaction occurs in the liquid phase and is independent of the starting surface morphology. The chemical transformation is accompanied by 10 orders of magnitude change in electrical conductivity, from <10 –11 S/cm for the parent Cu 3 BTC 2 material to 10 –1 S/cm for the resulting Cu(TCNQ) film. In conclusion, the conversion of Cu 3 BTC 2 films, which can be grown and patterned on a variety of (nonplanar) substrates, to Cu(TCNQ) opens the door for the facile fabrication of more complex electronic devices.

2D nucleation↗

Growth and electrical properties on NLO crystal: 4-N,N-dimethylamino 4′-N′-methylstilbazolium iodide

4-N,N-Dimethylamino-4′-N′-methylstilbazolium tosylate single crystals were grown by solution crystal growth method. The cell parameters of grown crystal have been estimated using single crystal-X-ray diffraction analysis. The variation of real (´ε) and imaginary (´ε) part of dielectric constants and dielectric loss were observed for different frequencies and temperatures. The ac and dc electrical conductivities and activation energy were determined for DMSI crystal using dielectric studies.

36 MATERIALS SCIENCE↗

Preparation and electrical properties of xCaRuO{sub 3}/(1 - x)CaTiO{sub 3} perovskite composites

CaRuO{sub 3}-CaTiO{sub 3} ceramic composites were prepared by sintering for short times for potential applications in the areas of electronic ceramics. Scanning electron microscopy and energy dispersive X-ray analysis showed two separate phases, CaRuO{sub 3} and CaTiO{sub 3} in the composite. Conductivity data, measured by the four-probe method, showed that the composites have high electrical conductivity when x {>=} 0.19 in xCaRuO{sub 3}-(1 - x)CaTiO{sub 3} composites. Furthermore, the nanoparticle of calcium ruthenate prepared by reverse micelle synthesis was used to be conductive agent for the composite. The result shows that the use of nano-sized calcium ruthenate enabled higher electrical conductivity to be maintained down to x = 0.09.

36 MATERIALS SCIENCE↗

Electrical properties of polyimides containing a near-surface deposit of silver

Films containing a surface or near-surface deposit of palladium, gold or copper metal as well as tin, cobalt, copper, or lithium oxides have been prepared by dissolving appropriate metal salts into poly(amide-acid)/N,N-dimethylacetamide solutions and curing the solvent cast films to temperatures up to 300 C. This preparation technique has been extended to evaluate the thermal, spectroscopic, and electrical characteristics of condensation polyimide films modified with silver nitrate. A near-surface deposit of metallic silver results but the reflective surface has high electrical resistivity (sheet resistivity) due to a polymer coating or overlayer above the metal. Details pertaining to the silver nitrate modified condensation polyimides are presented. Also, the applicability of the structural model and electrical model previously proposed for the cobalt oxide system are assessed.

Rancourt, J. D.↗

Electrical properties and thermal stability of Pd-doped copper nitride films

Pd-doped copper nitride films with Pd concentrations up to 5.6 at. % were successfully synthesized by reactive magnetron sputtering of metal targets. Higher concentration of Pd (>5.6 at. %) would deteriorate the quality of the deposits. XPS and XRD data strongly suggest that Pd atoms occupy the centers of the Cu{sub 3}N unit cells rather than simply substituting for the Cu atoms. A reduction in the electrical resistivity by three orders of magnitude was observed when the Pd concentration increases from zero to 5.6 at. %. All the deposits with the Pd concentration up to 5.6 at. % exhibit n-typed conductivity behavior. The corresponding carrier concentrations increase by four orders of magnitude from 10{sup 17} to 10{sup 21} cm{sup -3}. Compared with the undoped copper nitride films, a weakly Pd-doped Cu{sub 3}N films possess fine thermal stability in vacuum. And the decomposition product after annealing at 450 Degree-Sign C exhibits a good metallic behavior, indicating that it qualifies the fabrication of conduct wires or metallic structures for the promising applications.

36 MATERIALS SCIENCE↗

Investigation on structural and electrical properties of Fe doped ZnO nanoparticles synthesized by solution combustion method

In the present study, nanoparticles of Fe doped zinc oxide (ZnO) [Zn{sub 1-x}Fe{sub x}O where x=0.0, 0.01, 0.02, 0.03 and 0.05] were prepared by cost effective solution combustion method. The powder X-ray diffractometry confirms the formation of single phase wurtzite structure. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to investigate the micrsostructure of Fe-doped ZnO nanoparticles. The DC electrical conductivity was found to increase with temperature and measurement was carried out in the temperature range of 300-473K. DC electrical conductivity increases with temperature and decreases with Fe doping concentration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiation response and electrical properties of polymer energy storage capacitors: PVF2, Polysulfone, and Mylar

Efforts were made to develop a polymer film capacitor that is tolerant to radiation. The capacitors are to be utilized in a high voltage pulse discharge application. Radiation response data at high dose/dose rate levels are presented for polyvinylidene fluoride (PVF2), polysulfone, and Mylar. The results show that PVF2 is the most radiation tolerant while Mylar is the least tolerant. The data also show that the radiation response is quite dependent on operating electric stress.

Edwards, L. R.↗

Annealing effect on structural and electrical properties of thermally evaporated Cd{sub 1-x}Mn{sub x}S nanocrystalline films

Thin films of Cd{sub 1-x}Mn{sub x}S (0 {<=} x {<=} 0.5) were deposited on glass substrates by thermal evaporation. All the films were deposited at 300 K and annealed at 573 K. The as-deposited and the annealed films were characterized for composition, structure and microstructure by using energy-dispersive analysis for X-rays, X-ray diffraction, scanning electron microscopy and atomic force microscopy. Electrical conductivity was studied in the temperature range 190-450 K. All the films exhibited wurtzite structure of the host material with the grain size varying in the range between 36 and 82 nm. Resistivity of all the films is strongly dependent on Mn content and annealing temperature and lies in the range 13-160 {omega} cm.

36 MATERIALS SCIENCE↗

Electrical properties of epitaxial 3C- and 6H-SiC p-n junction diodes produced side-by-side on 6H-SiC substrates

3C-SiC (beta-SiC) and 6H-SiC p-n junction diodes have been fabricated in regions of both 3C-SiC and 6H-SiC epitaxial layers which were grown side-by-side on low-tilt-angle 6H-SiC substrates via a chemical vapor deposition (CVD) process. Several runs of diodes exhibiting state-of-the-art electrical characteristics were produced, and performance characteristics were measured and compared as a function of doping, temperature, and polytype. The first 3C-SiC diodes which rectify to reverse voltages in excess of 300 V were characterized, representing a six-fold blocking voltage improvement over experimental 3C-SiC diodes produced by previous techniques. When placed under sufficient forward bias, the 3C-SiC diodes emit significantly bright green-yellow light while the 6H-SiC diodes emit in the blue-violet. The 6H-SiC p-n junction diodes represent the first reported high-quality 6H-SiC devices to be grown by CVD on very low-tilt-angle (less than 0.5 deg off the (0001) silicon face) 6H substrates. The reverse leakage current of a 200 micron diameter circular device at 1100 V reverse bias was less than 20 nA at room temperature, and excellent rectification characteristics were demonstrated at the peak characterization temperature of 400 C.

EPITAXIAL LAYER↗

Characterization of Soil Thermal and Electrical Properties along Multiple Hillslope Transects at Teller Road Site, Seward Peninsula, Alaska, 2017

This dataset has been acquired along five-119 m long transects located on the bottom part of the watershed hillslope at the NGEE Arctic Teller Road site at mile marker 27 (TL_MM27) on the Seward Peninsula, Alaska in July and September 2017. The Distributed Temperature Profiling (DTP) system dataset consist in vertically-resolved profile of soil temperature covering the top 0.8 m of soil with 8 cm interval. In addition to DPT data, electrical resistivity tomography (ERT) data, soil moisture, depth to rock or thaw layer thickness (no differentiation) and ground elevations data have been acquired along each of the transects. A UAV-based geotiff mosaic of the investigated site is also provided. The four data types provided with this dataset of 37 files (*.csv, *.tif, *.DATA): (1) soil temperature profiles, (2) ERT data, (3) the physical measurements of the thaw layer, and (4) an orthomosaic GeoTIFF of the transect study area.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Gold Nanoparticle Monolayers with Tunable Optical and Electrical Properties

In this work, centimeter-scale gold nanoparticle (Au NP) monolayer films have been fabricated using a water/organic solvent self-assembly strategy. A recently developed approach, drain to deposit, is demonstrated to be most effective in transferring the Au NP films from the water/organic solvent interface to various solid substrates while maintaining their integrity. The interparticle spacing was tuned from 1.4 to 3.1 nm using alkylamine ligands of different lengths. The ordering of the films increased with increasing ligand length. The surface plasmon resonance and the in-plane electrical conductivity of the Au NP films both exhibit an exponential dependence on the interparticle spacing. These findings show great potential in scaling up the manufacturing of high-performance optical and electronic devices based on two-dimensional metallic nanoparticle superlattices.

36 MATERIALS SCIENCE↗