Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

A Passive Earth-Entry Capsule for Mars Sample Return

A combination of aerodynamic analysis and testing, aerothermodynamic analysis, structural analysis and testing, impact analysis and testing, thermal analysis, ground characterization tests, configuration packaging, and trajectory simulation are employed to determine the feasibility of an entirely passive Earth entry capsule for the Mars Sample Return mission. The design circumvents the potential failure modes of a parachute terminal descent system by replacing that system with passive energy absorbing material to cushion the Mars samples during ground impact. The suggested design utilizes a spherically blunted 45-degree half-angle cone forebody with an ablative heat shield. The primary structure is a hemispherical, composite sandwich enclosing carbon foam energy absorbing material. Though no demonstration test of the entire system is included, results of the tests and analysis presented indicate that the design is a viable option for the Mars Sample Return Mission.

Mitcheltree, Robert A.↗
DOE OSTI2025

Using chiral-induced spin selectivity as a tool to improve materials and processes for energy science

Studies relating to electrical energy conversion, storage, and generation, date back to the 19th century, however only in recent years have scientists begun to investigate the impact of the electron spin on these processes. Control and manipulation of the electron spin, an intrinsically quantum property of matter, opens new approaches to addressing energy science challenges. Furthermore, the chiral-induced spin selectivity (CISS) effect is enabling for this effort, because of the control over the transport and generation of both pure spin currents and spin-polarized charge currents. In this review article, we begin with a brief introduction on design strategies for the implementation of CISS in materials and then describe recent studies that demonstrate how CISS can be used to improve electrocatalysis and spintronics. Lastly, we conclude with forward-looking thoughts on the next steps for leveraging CISS in energy science.

Batteries↗
DOE OSTI2024

A Multiscale Investigation of the Mechanisms Controlling Materials Degradation in the Fusion Energy Environment (DE-SC0006661: Final Report)

Realizing the promise of fusion as a commercially attractive energy source requires the development of advanced structural materials capable of sustained operation in an incredibly hostile environment. The fusion environment presents many challenges associated with high cyclic thermal-mechanical loadings, welding and joining disparate materials, and achieving chemical compatibility with coolants and tritium breeders. Yet, the overarching concern is the degradation of physical and mechanical properties, resulting from a neutron energy spectrum peaked at 14 MeV. The high-energy fusion neutron irradiation produces both displacement damage and high levels of hydrogen and helium through transmutation reactions. Advanced materials development for use in such a hostile environment is predicated on understanding the underlying mechanisms responsible for physical and material property degradation. This project has closely combined computational, theoretical and experimental techniques within a multiscale materials science paradigm to determine the mechanisms controlling material degradation in the fusion environment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Summary of Methodology for Mitigating Risks Associated with Licensing and Qualifying AM Nuclear Materials

The US Department of Energy’s Advanced Materials and Manufacturing Technologies (AMMT) program focuses on accelerating the development, qualification, demonstration, and deployment of advanced materials and manufacturing technologies to enable reliable and economical nuclear energy. Laser powder bed fusion (LPBF) is one of the most popular additive manufacturing (AM) processes for fabricating components with intrinsically complex geometries. LPBF was extensively explored for nuclear applications under the previous Transformational Challenge Reactor program. Additionally, Oak Ridge National Laboratory developed and licensed the Peregrine software and larger digital platform that couples machine learning and in situ data collection during AM to detect anomalies and any evolved defects. The digital platform will be critical to (1) the qualification of AM components for nuclear applications that link location-specific data to macroscopic properties and (2) predict final component performance. Current in situ process monitoring tools are valuable for observing the formation of stochastic flaws, but additional data are needed to predict the resulting microstructures and associated material performance. Rapid cooling rates and large thermal gradients have caused large heterogeneities in the microstructure, which cause anisotropy in mechanical performance. The AMMT program is evaluating the best approaches for addressing these heterogeneities and their effect on component performance using a combination of multiscale modeling, enhanced in situ process monitoring, and high throughput experimental testing. This report summarizes strategies for mitigating the risks associated with qualifying AM components, including developing new sensing capabilities for in situ process monitoring and characterizing melt pool solidification and residual stresses to inform multiscale modeling efforts.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Fractionation of Lignocellulosic Biomass into High-Value Products - CRADA Report

Idaho National Laboratory (INL) has developed a process for adding value in the biomass feedstock supply chain. The key aspects of this process include: (1) anaerobic and chemical treatment of biomass during storage, (2) fractionation of biomass into conversion-ready feedstock and high-value coproducts, and (3) high-moisture pelleting to increase the bulk density and stabilize the feedstock. The purpose of the chemical treatment is to overcome the recalcitrant nature of the feedstock to improve the biochemical conversion process of breaking down the biomass into sugars. To maximize the utilization of the biomass, the feedstock can be fractionated into hemicellulose and lignin rich fractions. Finally, to increase the materials overall energy density, produce a shelf-stable material, and to facilitate transport, the feedstock is densified in a pelleting process. The first two steps of the processes have been verified at bench scale showing an improvement in theoretical glucose yield from 23.1% to 44.5% and an improvement in theoretical xylose yield from 8.9% to 23.1% from ground corn stover. It is hypothesized that densification will further increase the carbohydrate yield in the sample. The goal of this project was to evaluate the technical feasibility and process economics of the above process and to provide preliminary data to Golden Leaf Energy, Inc to access its potential commercialization for converting biomass to ethanol and renewable chemicals. Corn stover (CS), the largest available agricultural residue, and Chinese tallow (CT), an invasive wood species with no current commercial value, were chosen as feedstocks for this project.

09 BIOMASS FUELS↗
DOE OSTI2023

Electrolyzer and Fuel Cell Recycling for a Circular Hydrogen Economy

Abstract Electrolyzers and fuel cells will be crucial for achieving global clean hydrogen and industrial decarbonization goals. However, the nascent clean hydrogen sector faces uncertainties around material supply chains and technology end‐of‐life management. This work aims to guide the transition to a circular hydrogen economy by using process modeling, techno‐economic analysis, and life cycle assessment to evaluate the material cost, energy use, greenhouse gas (GHG) emissions, toxicity, and water use of five potential recycling strategies for proton exchange membrane electrolyzers (PEMWE) and fuel cells (PEMFC). Hydrometallurgy, acid dissolution, and electrochemical dissolution are shown to offer 2–7 times improvement across all assessed metrics relative to the manufacturing of PEMWE and PEMFC from raw materials. Recycling can also lower the raw material demand, material cost, energy use, and GHG emissions associated with PEMWE and PEMFC deployment in the United States in 2050 by 23%, 19%, 21%, and 16%, respectively. This study provides key insights into the costs, benefits, and complexities of recycling strategies for PEMWE and PEMFC, aiding the development of a circular economy that is synergistic with clean hydrogen deployment.

08 HYDROGEN↗
DOE OSTI2024

Lithicone‐Protected Lithium Metal Anodes for Lithium Metal Batteries with Nickel‐Rich Cathode Materials

The high energy density advantage of lithium (Li) metal batteries (LMBs) makes them increasingly desirable; however, problems such as strong reactivity and dendrite growth of Li metal anode limit their practical uses. In this work, a novel Li‐containing glycerol (LiGL) or lithicone protection layer on a 50 μm thick Li metal anode is employed for improving the performance of LMBs. This LiGL layer was accurately deposited via a molecular layer deposition (MLD) process at 150 °C, using lithium tert‐butoxide and glycerol as precursors. The as‐formed LiGL coating layer is highly tunable in its thickness by simply adjusting MLD cycles and shows a good stability and outstanding ionic transport properties. The LiGL layer is found to effectively mitigate side reactions and enhance cycling stability in both symmetric cells and full cells. Specifically, the LMBs with LiGL@Li anode of 400 MLD cycles and LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathode enable a capacity retention of ≈87%, much higher than ≈35% of the cells with bare Li after 200 cycles at a charge/discharge current density of 2.1 mA cm −2 . This work paves a feasible way for practical LMBs with improved capacity and stability through applying an innovative protection layer on Li metal anodes.

25 ENERGY STORAGE↗
DOE OSTI2022

An analytical method for identifying synergies between behind-the-meter battery and thermal energy storage

Electric utilities build generation capacity to meet the highest demand period, and they often pass on the costs associated with these peaking generators to building owners through demand charges. Building owners can minimize these demand charges by shifting energy use away from peak periods with behind-the-meter storage. This storage can include batteries, which can directly shift the metered load, or thermal energy storage, which can shift thermal-driven electric loads like air conditioning. However, there is a lack of research on how best to combine battery and thermal energy storage. In this study, we develop an analytical sizing method to calculate the potential demand reduction and annualized cost savings for different combinations of thermal and battery energy storage sizes. We show that adding batteries to a thermal energy storage system can increase the total system's load shaving potential. This is particularly true when the building has onsite photovoltaic generation or electric vehicle charging, which add significant variability to the load shape. We also show that for a given total storage size, selecting a higher fraction of thermal energy storage can significantly lower the cycling of the battery, and therefore extend the battery life. This, combined with the expected lower first cost of thermal energy storage materials compared to batteries, shows that hybrid energy storage systems can outperform a standalone battery or standalone thermal storage system. Assuming the thermal storage has a capital cost 6x lower than the battery, our analysis shows that the optimal system is 71% thermal energy storage and 29% battery energy storage for a scenario with electric vehicle charging. The annualized cost savings for this system are $48.6 k/yr, whereas an equivalently sized standalone thermal energy storage system would provide annualized cost savings of $28.5 k/yr and a standalone battery would lead to savings of $8.72 k/yr. The hybrid system also reduces battery cycling by 52% compared to a standalone battery, extending battery lifetime.

25 ENERGY STORAGE↗
DOE OSTI2025

Transmission electron microscopy with in-situ ion irradiation: Facilities and community

Whilst there is a clear scientific and technological need for the technical capabilities of transmission electron microscopes with in-situ ion irradiation, it also requires a collaborative community of international researchers to support such facilities in successfully meeting this demand. Instruments of this type serve to provide fundamental understanding of the mechanisms which drive changes in materials important to nuclear fission and fusion energy, the semiconductor industry, quantum information systems, space travel, astronomy, geology and many more applications. As these areas continue to evolve and the instrumentation possibilities expand, the capacity of in-situ ion irradiation facilities must also develop hand-in-hand with the user community to deliver an ever-greater diversity of high-fidelity extreme-environment experimentation. Future directions for the field, such as miniaturization from MEMS/microfluidic devices and advanced controls with ML-based analysis, continuously emerge to advance both the hardware and software which support the coupling of TEMs with ion beams. This review sets out to provide up-to-date insights into the community and advancement of current, and development of future, facilities which have the potential to further unlock access to the nanoscale exploration of coupled extreme environments crucial to many of the important science and engineering challenges we face today.

In-situ irradiation↗
DOE OSTI2021

Electron and photon reconstruction and identification with the CMS experiment at the CERN LHC

The performance is presented of the reconstruction and identification algorithms for electrons and photons with the CMS experiment at the LHC. The reported results are based on proton-proton collision data collected at a center-of-mass energy of 13 TeV and recorded in 2016–2018, corresponding to an integrated luminosity of 136 fb^-1. Results obtained from lead-lead collision data collected at √(sNN)=5.02 TeV are also presented. Innovative techniques are used to reconstruct the electron and photon signals in the detector and to optimize the energy resolution. Events with electrons and photons in the final state are used to measure the energy resolution and energy scale uncertainty in the recorded events. The measured energy resolution for electrons produced in Z boson decays in proton-proton collision data ranges from 2 to 5%, depending on electron pseudorapidity and energy loss through bremsstrahlung in the detector material. The energy scale in the same range of energies is measured with an uncertainty smaller than 0.1 (0.3)% in the barrel (endcap) region in proton-proton collisions and better than 1 (3)% in the barrel (endcap) region in heavy ion collisions. The timing resolution for electrons from Z boson decays with the full 2016–2018 proton-proton collision data set is measured to be 200 ps.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Estimating List-Mode Data Sensitivities to Nuclear Data with MCNP6

Nuclear data are a vital component of predictive simulations used in applications like experiment design, stockpile stewardship, nuclear nonproliferation/safeguards, health physics, and criticality safety. A singular simulation requires the coalescence of different areas of nuclear data such as cross sections, angular distributions, and energy distributions of emitted neutrons for different materials and energy ranges. Improving nuclear data and thus reducing the uncertainty in simulated parameters could enable smaller, better-informed safety factors and ultimately reduce operational and procedural costs. There is a constant effort to garner a better understanding of the physical quantities represented by nuclear data through experiments. Integral experiment benchmarks use simulated and measured results to validate current nuclear data values. In the past, benchmarks primarily focused on the effective multiplication factor (k eff ); however, this limited scope has caused compensating errors and areas of nuclear data that lack validation. Compensating errors are inaccuracies in nuclear data that are obfuscated by cancellation when observing integrated values such as k eff . Diverse integral benchmark experiments that look for quantities of interest other than k eff and include multiple responses minimize the possibility of compensating errors and provides validation to areas of nuclear data previously lacking experimental validation. Benchmark experiments can be optimized during the design process to be highly dependent on specific areas of nuclear data. The dependence of a response in an experiment to a specific area/type of nuclear data is defined as sensitivity. A larger sensitivity means that nuclear data uncertainties will play a larger role in the response(s) resulting in larger bias. Currently, the sensitivity capabilities of the Monte Carlo N-Particle (MCNP ®1 ) transport code are limited to responses of k eff and tallied values (e.g., flux, surface current). As a part of the EUCLID project, this work explores estimating list-mode nuclear data sensitivities that can be used to design experiments aimed to constrain and reduce compensating errors in nuclear data by focusing on responses other than k eff . Tallied values are ideal quantities that are estimated with detectors during experiments. List-mode data (a list of neutron collection times) are the direct output of detector systems in subcritical neutron noise experiments. Expanding MCNP sensitivity capabilities to include the sensitivity of responses estimated from list-mode data, such as the prompt neutron decay constant (α) and multiplicity estimates (S and D), enables more direct comparison of simulated and measured experimental quantities. Additionally, deterministic tools such as SENSMG are capable of obtaining sensitivities to a wide variety of responses; however, these tools cannot handle complex geometries due to the assumptions made in discretizing the phase-space variables of the Boltzman transport equation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Single-Crystalline Ni-Rich LiNi x Mn y Co 1– x – y O 2 Cathode Materials: A Perspective

To drive electrical vehicles for long-range, the energy density of Li-ion batteries must be further enhanced, which requires high-energy cathode materials. Among them, Ni-rich LiNi x Mn y Co 1–x–y O 2 (x > 0.5, NMC) is one of the most promising candidates. However, traditional poly-crystal (PC) NMC materials, whose particles are secondary clusters consisting of many primary crystalline particles, are susceptible to pulverization along the inter grain/particle boundaries, resulting in poor cycle stability. Recently, single crystal (SC)-NMC cathodes are proposed as they are believed to have several merits such as high structural integrity, lower interface with electrolyte, and potentially better energy storage performance. Nevertheless, several queries, such as the merits of SC structure and the mechanism for their structure degradation, are still controversial and required to be addressed. Here, in this study, the synthesis parameters, properties, energy storage as well as safety of SC- and PC-NMC cathodes with various Ni contents are critically reviewed, for clarifying the merits and drawbacks of SC. Furthermore, the study focuses on the recent advances of insight mechanisms and strategies for stabilizing the structure/interface by doping, morphology engineering, surface coating, and composition tailoring. The remaining challenges, safety concerns, and perspectives to enhance the electrochemical performance of SC-NMC cathodes for electric vehicle application are followed.

25 ENERGY STORAGE↗
DOE OSTI2023

High-Nickel Cathode Materials for High-Energy, Long-Life, Low-Cost Lithium-Ion Batteries (Final Report)

The overall goal of this project is to produce Li-ion cells, which deliver at least 600 Wh kg -1 at the cathode level with usable lifetimes of at least 1,000 cycles or 15 years of storage (calendar life). A secondary goal of this project is to minimize the use of cobalt in the cathode, with the ultimate goal of eliminating cobalt entirely. To develop such a cathode, the University of Texas at Austin (UT Austin) team extensively investigated the structural, physical, and chemical properties of layered oxide materials. A panel of dopant elements were surveyed with an emphasis on identifying those, which impart electrochemical and thermal stability. Of those tested, Al and Mg showed the greatest performance improvements while still being easily incorporated into the cathode through simple alterations of the precursor coprecipitation method. Other dopants, such as Ta, Nb, B, and F significantly improved cathode performance, yet their mode of incorporation required additional processing which negated their use under scaled-up conditions. From this work, a first-generation cathode LiNi 0.85 Mn 0.075 Co 0.05 Al 0.02 Mg 0.005 O 2 (NMCAM-85) was produced and an initial set of 2 Ah cells was fabricated by Tesla Inc. These cells delivered 650 Wh kg -1 and a cycle life of just over 700 cycles. Further improvements were garnered through careful study of electrolyte additives. A tailored, ethylene carbonate (EC)-free electrolyte was developed, which improved capacity retention from 60% to 82% after 500 cycles in model LiNi 0.9 Mn 0.05 Al 0.05 O 2 (NMA-90) full cells. This study identified the additives fluoroethylene carbonate (FEC) and lithium difluorophosphate (LiPO 2 F 2 ) as beneficial additives, which were included in the electrolyte for the end-of-project cells. The UT Austin team developed a high-Ni layered oxide cathode LiNi 0.85 Mn 0.1 Al 0.05 Mg 0.005 O 2 (NMAM-85) capable of meeting the project goals. This cathode was synthesized in kilogram quantities and delivered to Tesla for fabrication into 2 Ah pouch cells for DOE testing. These large-format cells achieved 630 Wh kg -1 at the cathode level under the designated testing parameters, meeting the project goal with a completely cobalt-free cathode. The large-format cells are currently undergoing cycle life and calendar life evaluation at Idaho National Lab.

25 ENERGY STORAGE↗
DOE OSTI2021

Towards Efficient Uncertainty estimation in deep learning for robust energy prediction in crystal materials

In material science, recent studies have started to explore the potential of using deep learning to improve property prediction from high-fidelity simulations, e.g, density functional theory (DFT). However, the design spaces are sometimes too large and intractable to sample completely. This results in a critical question that is how to evaluate the confidence and robustness of the prediction. In this paper, we propose an efficient approach to estimate uncertainty in deep learning using a single forward pass and then apply it for robust prediction of the total energy in crystal lattice structures. Our approach is built upon the deep kernel learning (DKL) that originally introduces to leverage the expressiveness of deep neural networks as input with a probabilistic prediction of Gaussian processes (GPs) as output. Existing DKL methods have difficulties in the accuracy of predictive uncertainty, training stability, and scaling to large datasets, which lead to significant barriers in real-world applications. We propose to address these challenges by using an inducing point approximate GP in feature space combined with spectral normalization as a regularization. We finally demonstrate our robust performance on an artificial example and a real-world application from materials chemistry.

Bi, Sirui↗
DOE OSTI2022

Releasing chemical energy in spatiallyprogrammed ferroelectrics

Chemical energy ferroelectrics are generally solid macromolecules showing spontaneous polarization and chemical bonding energy. These materials still suffer drawbacks, including the limited control of energy release rate, and thermal decomposition energy well below total chemical energy. To overcome these drawbacks, we report the integrated molecular ferroelectric and energetic material from machine learning-directed additive manufacturing coupled with the ice-templating assembly. The resultant aligned porous architecture shows a low density of 0.35 g cm -3 , polarization-controlled energy release, and an anisotropic thermal conductivity ratio of 15. Thermal analysis suggests that the chlorine radicals react with macromolecules enabling a large exothermic enthalpy of reaction (6180 kJ kg -1 ). In addition, the estimated detonation velocity of molecular ferroelectrics can be tuned from 6.69 ± 0.21 to 7.79 ± 0.25 km s -1 by switching the polarization state. These results provide a pathway toward spatially programmed energetic ferroelectrics for controlled energy release rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Moving closer to experimental level materials property prediction using AI

Abstract While experiments and DFT-computations have been the primary means for understanding the chemical and physical properties of crystalline materials, experiments are expensive and DFT-computations are time-consuming and have significant discrepancies against experiments. Currently, predictive modeling based on DFT-computations have provided a rapid screening method for materials candidates for further DFT-computations and experiments; however, such models inherit the large discrepancies from the DFT-based training data. Here, we demonstrate how AI can be leveraged together with DFT to compute materials properties more accurately than DFT itself by focusing on the critical materials science task of predicting “formation energy of a material given its structure and composition”. On an experimental hold-out test set containing 137 entries, AI can predict formation energy from materials structure and composition with a mean absolute error (MAE) of 0.064 eV/atom; comparing this against DFT-computations, we find that AI can significantly outperform DFT computations for the same task (discrepancies of $$>0.076$$ > 0.076 eV/atom) for the first time.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Techno-Economic Assessment of Residential Heat Pump Integrated with Thermal Energy Storage

Phase change material (PCM)-based thermal energy storage (TES) can provide energy and cost savings and peak demand reduction benefits for grid-interactive residential buildings. Researchers established that these benefits vary greatly depending on the PCM phase change temperature (PCT), total TES storage capacity, system configuration and location and climate of the building. In this study, preliminary techno-economic performance is reported for a novel heat pump (HP)-integrated TES system using an idealized approach. A simplified HP-TES was modeled for 1 year of space heating and cooling loads for a residential building in three different climates in the United States. The vapor compression system of the HP was modified to integrate with TES, and all heat transfer to and from the TES was mediated by the HP. A single PCM was used for heating and cooling, and the PCT and TES capacity were varied to observe their effects on the building’s energy consumption, peak load shifting and cost savings. The maximum reduction in electric consumption, utility cost and peak electric demand were achieved at a PCT of 30 °C for New York City and 20 °C for Houston and Birmingham. Peak energy consumption in Houston, New York City, and Birmingham was reduced by 47%, 53%, and 70%, respectively, by shifting peak load using a time-of-use utility schedule. TES with 170 MJ storage capacity allowed for maximum demand shift from on-peak to off-peak hours, with diminishing returns once the TES capacity equaled the daily building thermal loads experienced during the most extreme ambient conditions.

25 ENERGY STORAGE↗