Search NASA⌕ Search

SEARCH · Search NASA

Results for “Entry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Plasma entry into the earth's magnetosphere

Both high- and low-altitude measurements are used to establish the salient features of the three regions presently thought to be the best candidates for the entry of magnetosheath plasma into the magnetosphere, and hence the primal sources of charged particles for the plasma sheet and its earthward termination in the ring current. These three regions are (1) the polar cusps and their extensions into the nighttime magnetosphere, (2) the downstream flanks of the magnetosphere at geocentric radial distances approximately equal to 10 to 50 earth radii along the plasma sheet-magnetosheath interface, and (3) the distant magnetotail at radial distances greater than or approximately equal to 50 earth radii. Present observational knowledge of each of these regions is discussed critically as to evidences for charged particle entry into the magnetosphere from the magnetosheath. The possibility that all three of these magnetospheric domains share an intimate topological relationship is also examined.

Frank, L. A.↗
NASA NTRS1972

Analytical design of sensors for measuring during terminal phase of atmospheric temperature planetary entry

An analytical study was conducted to develop a sensor for measuring the temperature of a planetary atmosphere from an entry vehicle traveling at supersonic speeds and having a detached shock. Such a sensor has been used in the Planetary Atmosphere Experiments Test Probe (PAET) mission and is planned for the Viking-Mars mission. The study specifically considered butt-welded thermocouple sensors stretched between two support posts; however, the factors considered are sufficiently general to apply to other sensors as well. This study included: (1) an investigation of the relation between sensor-measured temperature and free-stream conditions; (2) an evaluation of the effects of extraneous sources of heat; (3) the development of a computer program for evaluating sensor response during entry; and (4) a parametric study of sensor design characteristics.

Millard, J. P.↗
NASA NTRS1972

PAET entry heating and heat protection experiment.

A description is given of the thermal characterization of two low-density (270 and 450 kg/cu cm) elastomeric silicone ablators determined during the entry of the NASA Ames Planetary Atmosphere Experiments Test (PAET) vehicle into the earth's atmosphere. The spacecraft configuration, entry parameters, and associated trajectory variables are presented. Measurements of both the surface convective heat transfer rate and pressure on the beryllium nose cap are shown to be within 5% of theory. The predicted and measured internal temperatures are compared at various depths in the forebody and afterbody heat shields. Significant differences observed between experiment and theory for the afterbody thermal response are examined in relation to existing laboratory data.

Vojvodich, N. S.↗
NASA NTRS1972

Roll-modulated lifting entry optimization.

Equations of lifting entry are considered for fixed-angle-of-attack vehicular motion with path control for roll modulation of lift. Attention is directed to relocation and its consequences for the fixed-angle-of-attack atmospheric entry problem. Two reduced-order methods for working with the resulting system of equations are briefly examined. The methods are deemed to warrant further study.

Kelley, H. J.↗
NASA NTRS1972

Summary analysis of the Gemini entry aerodynamics

The aerodynamic data that were derived in 1967 from the analysis of flight-generated data for the Gemini entry module are presented. These data represent the aerodynamic characteristics exhibited by the vehicle during the entry portion of Gemini 2, 3, 5, 8, 10, 11, and 12 missions. For the Gemini, 5, 8, 10, 11, and 12 missions, the flight-generated lift-to-drag ratios and corresponding angles of attack are compared with the wind tunnel data. These comparisons show that the flight generated lift-to-drag ratios are consistently lower than were anticipated from the tunnel data. Numerous data uncertainties are cited that provide an insight into the problems that are related to an analysis of flight data developed from instrumentation systems, the primary functions of which are other than the evaluation of flight aerodynamic performance.

Whitnah, A. M.↗
NASA NTRS1973

Spacecraft microbial burden reduction due to atmospheric entry heating: Jupiter

Planetary quarantine analyses performed for recent unmanned Mars and Venus missions assumed that the probability of contamination by a spacecraft given accidental impact was equivalent to one. However, in the case of the gaseous outer planets, the heat generated during the inadvertent entry of a spacecraft into the planetary atmosphere might be sufficient to cause significant microbial burden reduction. This could affect navigation strategy by reducing the necessity for biasing the aim point away from the planets. An effort has been underway to develop the tools necessary to predict temperature histories for a typical spacecraft during inadvertent entry. In order that the results have general applicability, parametric analyses were performed. The thermal response of the spacecraft components and debris resulting from disintegration was determined. The temperature histories of small particles and composite materials, such as thermal blankets and an antenna, were given special attention. Guidelines are given to indicate the types of components and debris most likely to contain viable organisms, which could contaminate the lower layers of the Jovian atmosphere (approximately one atmosphere of pressure).

Gonzalez, C. C.↗
NASA NTRS1972

Molecular beam simulation of planetary atmospheric entry - Some recent results.

Progress is reported in the development of molecular beam techniques to simulate entry into planetary atmospheres. Molecular beam sources for producing fast beams containing CO2 and atomic oxygen are discussed. Results pertinent to the design and calibration of a mass spectrometer ion source for measurement of the Martian atmosphere during the free molecule portion of the entry trajectory are also presented. The shortcomings and advantages of this simulation technique are discussed, and it is demonstrated that even with certain inadequacies much information useful to the ion source design was obtained. Particularly, it is shown that an open-cavity configuration retains sensitivity to atomic oxygen, provides reasonable signal enhancement from the stagnation effect, is not highly sensitive to pitch and yaw effects, and presents no unforeseen problems in measuring CO2 or atomic oxygen.

French, J. B.↗
NASA NTRS1972

Transmission strategies for atmospheric entry probes.

In this article we shall be concerned with the question of how to maximize the expected data return when the channel capacity cannot be predicted in advance. An example of this type is a planetary entry probe to Venus or Jupiter, whose atmospheric transmission characteristics are not yet fully known. And even if they were known, these transmission characteristics would be subject to unpredictable changes due to planet weather and/or entry trajectory.

Butman, S.↗
NASA NTRS1973

Heat shielding for Venus entry probes.

Two contrasted approaches to ablative thermal protection of Venus entry probes are presented - a typical carbonaceous charring ablator and a dielectric reflective ablator. The interesting observation in this study is that mass loss is not the controlling variable in heat-shield sizing. A heat-soak problem determines the carbon phenolic sizing. For Teflon, the material thickness required to accomplish reflection is the sizing factor. The total heat-shield weight required to handle either steep or shallow entry is computed to be 13% less for a Teflon shield (if at least 3.2 mm are required for reflection) than for a charring ablator shield. If an efficient reflective backing is used with Teflon, the thickness can be reduced 1.0 mm and the computed weight is 31% less for Teflon than for the charring ablator. Such weight reductions may significantly increase the science payload weight of the miniprobes.

Peterson, D. L.↗
NASA NTRS1973

Pioneer spacecraft for atmospheric entry missions to the outer planets.

The composition of the atmospheres of the Jovian planets is probably representative of the composition of the original matter from which the solar system was formed. An entry probe would be required for obtaining quantitative data about the atmosphere as a function of altitude. A mission involving the detachment of an atmospheric entry probe from a Pioneer spacecraft is being considered. Instruments in the probe are to measure pressure, temperature, and composition of the atmosphere during descent. The Pioneer spacecraft is to serve as a communications relay for the data transmitted from the probe.

Dixon, W. J.↗
NASA NTRS1973

Investigation of configuration effects on entry heating distributions at Mach no. equal 8.0 (OH41)

Aerodynamic heating data were obtained on 0.006 scale models of four Rockwell International SSV double delta wing Orbiters in the Mach 8 variable density tunnel. A model of two previously tested Rockwell International Orbiters which are identified in the Configuration Description of this report were also tested. Orbiter surfaces were thermally mapped from the laminar through turbulent flight regimes during re-entry. Various modifications were made to model lower surfaces to determine the cause of transition in the vicinity of 3.0 million Reynolds number per foot. Re-entry data were acquired for angles of attack from 25 through 35 degrees at nominal Reynolds numbers per foot of 1.0, 2.0, 2.3, 2.5, 3.0, 3.5, 4.5 and 6.0 million utilizing the phase change paint technique. Launch data were acquired on the model upper surfaces for angles of attack of 0 and -5 degrees at nominal Reynolds numbers per foot of 3.0 and 6.0 million. A total of 70 orbiter heating runs and 6 material sample sphere runs were completed.

Gorowitz, H.↗
NASA NTRS1973

A roll-pitch interaction simulator and a control position command encoder for remote piloting of spin-entry research models

The Langley Research Center uses radio-controlled, scaled aircraft models to study the spin-entry characteristics of aircraft. Recent spin-entry studies required the use of an electronic proportional-control system for manipulating model control surfaces. In order to meet control system requirements, a special-purpose analog computer was designed to simulate the coupling between roll and pitch controls. A digital encoder was designed to encode the voltage analogs of control-surface position into a special pulse format for transmission to the model. This paper describes the two special developments and their relationship to the functions of the overall control system.

Meissner, C. W., Jr.↗
NASA NTRS1974

Orbital and entry tracking accessory for globes

An orbital and entry tracking accessory or attachment is described which can be mounted on a globe to provide a rapid means of determining range requirements for entry vehicles returning from any orbit to any desired landing site with reasonable accuracy. The device is constructed of clear plastic strip material, and comprises a support ring, a calibrated orbital track member rigidly carried by the support ring, and a calibrated lateral range member pivotally coupled to the support ring at points such that the lateral range member is always oriented normally to the orbital track member. The assembly is mountable on the globe relatively snugly, but freely movable. At least one of the members has a detachable coupling which permits placement of the device on the globe.

Pritchard, E. B.↗
NASA NTRS1974

Curve fits of predicted inviscid stagnation-point radiative heating rates, cooling factors, and shock standoff distances for hyperbolic earth entry

Curve-fit formulas are presented for the stagnation-point radiative heating rate, cooling factor, and shock standoff distance for inviscid flow over blunt bodies at conditions corresponding to high-speed earth entry. The data which were curve fitted were calculated by using a technique which utilizes a one-strip integral method and a detailed nongray radiation model to generate a radiatively coupled flow-field solution for air in chemical and local thermodynamic equilibrium. The range of free-stream parameters considered were altitudes from about 55 to 70 km and velocities from about 11 to 16 km.sec. Spherical bodies with nose radii from 30 to 450 cm and elliptical bodies with major-to-minor axis ratios of 2, 4, and 6 were treated. Powerlaw formulas are proposed and a least-squares logarithmic fit is used to evaluate the constants. It is shown that the data can be described in this manner with an average deviation of about 3 percent (or less) and a maximum deviation of about 10 percent (or less). The curve-fit formulas provide an effective and economic means for making preliminary design studies for situations involving high-speed earth entry.

Suttles, J. T.↗
NASA NTRS1974

Microstrip antenna study for Pioneer Saturn/Uranus atmosphere entry probe

The design parameters of a microstrip antenna were studied to determine its performance characteristics as affected by an atmospheric entry probe environment. The technical literature was reviewed to identify the known design and performance characteristics. These data were used to evaluate the expected effects of mission environments on the microstrip antenna design proposed for the Saturn/Uranus Atmospheric Entry Probe (SAEP). Radiation patterns and VSWR measurements were made to evaluate the performance in the SAEP thermal environment. Results of the literature search and pattern tests confirm that the microstrip antenna is a good choice as a transmitting antenna on the SAEP. The microstrip antenna is efficient, compact, and well suited to a space environment. The pattern can be controlled with a minimum beamwidth of 60 degrees (air substrate; e.g., honeycomb structure) and a maximum on the order of 100 degrees with higher dielectric constant substrates. The power handling capacity is good and can be improved by covering the antenna with a dielectric cover.

Kuhlman, E. A.↗
NASA NTRS1974

Determination of aerodynamic stability and drag of the Titan 3 C SRM during entry

An experimental aerodynamic investigation was conducted in the NASA/MSFC 14-inch Trisonic Wind Tunnel on a 0.00736 scale model of Titan 3 C Solid Rocket Motor (SRM). Static stability and drag data were obtained for Mach numbers of 0.6 to 4.96, angles of attack of minus 10 deg to 190 deg, and roll angles of 0 to 360 deg. The resulting data will be used to predict the dynamic motions of the SRM during entry which will then be compared to flight data. This comparison will improve and lend credibility to methods for predicting the entry dynamics of the space shuttle Solid Rocket Booster (SRB), which is needed for recovery studies and design of the parachute recovery system.

Ramsey, P. E.↗
NASA NTRS1974

Volume reflecting heat shields for entry into the giant planet atmospheres

The performance of a volume reflecting or backscattering silica heat shield is examined for an entry probe into the severe radiative environments of Saturn, Uranus, and Jupiter. The governing equations for the material response are solved numerically and include the effects of temperature-dependent thermal properties, temperature- and wavelength-dependent radiative properties, and surface recession caused by thermochemical ablation. The influence of the scattering properties on backface temperature is examined, and results are presented which show the required heat-shield thickness for the entry trajectories selected.

Howe, J. T.↗