SEARCH · Search NASA

Results for “FLUID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

NASA NTRS2023

Assessment of the Fluid Dynamics Boundary Condition in Ablating or Blowing Flows

Improved models of ablative thermal protection systems have enabled the treatment of materials and fluid behavior in a coupled manner. This paper reports a new approach to modeling the interface between fluid and material, with attention to the conservation of species mass flux and energy on the fluid side of the interface. The general equation is presented and is shown to recover the traditional uncoupled fluid/materials response interface. Including the chemical reaction terms on the CFD side of the interface makes the heat flux exchange independent of the thermodynamic reference state and, therefore, a measurable quantity. Doing so allows the material response solver to take as input the surface heat flux rather than a film coefficient. Removing the film coefficient approximation enables more direct solution of vehicle thermal response but requires consistency in the wall state. The mixing of the shock layer and pyrolysis gas is then computed with finite rate chemistry within the fluid solver. The boundary conditions described have been implemented in the DPLR v4.05.1 code. Char removal is captured using finite rate chemistry in DPLR’s gas surface interaction module. Aspects of coupling these solutions to material response are discussed.

Ablation↗

NASA NTRS2023

Assessment of the Fluid Dynamics Boundary Condition in Ablating or Blowing Flows

Ablation↗

NASA NTRSDate not supplied

Numerical Analysis of Cavitation-Induced Two-Phase Fluid Transients in Cryogenic Feedlines Using Finite Volume Procedure

This article presents a numerical investigation of the cavitation induced fluid transient in cryogenic feedline due to sudden closure of the valve A one dimensional numerical model based on finite volume procedure consisting of nodes and branches using Generalized Fluid System Simulation Program ( has been employed for the prediction of pressure variations The unsteady friction formulation accurately determines wall shear stress, and a homogeneous mixture model is used for two phase flow modeling Numerical results obtained with the present formulation are compared with experimental results and Method of Characteristic ( based results It is observed that low residual in flow variable calculation improves the solution providing numerically stable results GFSSP is able to reproduce the fluid transient peak due to vapor collapse Subsequently, it can retain the shape of pressure wave for two phase fluid transients, but it is dampening faster compared to experiments Further investigation is required with set of experiments to validate the present numerical approach for different experimental data.

Fluid Transient↗

NASA NTRSDate not supplied

Passive Fluid Transport in Microgravity Environments for the Stabilization of Rotating Spacecrafts

Rotating spacecraft offers the potential to create artificial gravity for extended space missions. However, designing a guidance and control system for such vehicles involves complex considerations. This paper examines a vehicle segmented into three parts, with the propulsion unit positioned at the vehicle’s center of mass. The vehicle must maintain stability around this central point, even under atypical conditions. Consequently, a durable and passive spin stabilization system is essential, requiring the passive transport of fluids. A combined system consisting of microcapillary bundles and hydraulic ram pumps is explored to transport fluids without any external energy added to the system. The dynamics of such a system are investigated, establishing performance and control limitations, and developing a control strategy predicated on the fluid dynamics between the segments. A model of the system is developed to validate the approach, showing that passive stabilization is possible, however, not as effective as an active stabilization system. Additionally, the model can be expanded for broader applications, including mass redistribution, a theoretical fluid ring, and three axis rotating systems.

Dynamics↗

NASA NTRSDate not supplied

Plant Watering in Low Gravity: The Study of the Fluid Dynamic Characteristics of Lunar Regolith Simulant for the Application of Crop Production Systems Using Scaled Capillary Devices

Bioregenerative life support is key to sustaining human life on the surface of other celestial bodies for missions beyond Low Earth Orbit (LEO). One example of such life support includes crop production systems capable of producing both plants and fungi for astronaut consumption. There have been numerous efforts to design and deploy such systems; however, there have been persistent fundamental issues with the water delivery systems. This study aims to understand and model the fluid dynamics of crop production systems to inform engineers about the key parameters needed for the design of such systems. The primary objective is to validate and expand upon NASA’s previous study, the Plant Water Management (PWM) experiments, to understand the fluid phenomena present in substrate-based systems. The model will then be expanded to include parameters for changing the test material of potential growth media as well as the varying water demands of the crop throughout its different stages in its life cycle. Specifically, this study is focused on the viability of using lunar regolith for agricultural purposes. Terrestrial-based scaled capillary models will be utilized to mimic the fluid phenomena occurring due to the low gravity environment seen on the lunar surface. Ultimately, the study will model the fluid flow present in the lunar regolith simulant and inform researchers on how to incorporate the material into crop production systems on the lunar surface.

gravity↗

DOE OSTI2022

Fluid Properties for MOOSE

The Multiphysics Object-Oriented Simulation Environment (MOOSE) enables a wide range of advanced nuclear reactor simulations. Under the guidance of MOOSE's Finite Volume Team, we worked on the fluid properties module. Significant contributions include enabling Tabulated Fluid Properties (TFP) for systems thermal hydraulics analysis, Temperature and Pressure functionalized Fluid Properties, and Lead & Lead-Bismuth properties. Along with improving the capabilities of the fluid properties module, we also improved the documentation to allow for future users and developers to understand how the module works.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

Phase-field modeling of rate-dependent fluid-driven fracture initiation and propagation

The rate-dependent behavior associated with deformation and fracturing of materials, such as natural rocks, poses significant challenges for modeling. In addition to the complications of the viscoelastic response, the speed of fracture propagation reflects micromechanical mechanisms in the fracture process zone(FPZ). In order to represent these complicated behaviors, a thermodynamically consistent, rate-dependent fracture model is required. Based on rigorous thermodynamic principles, we derive a rate-dependent phase-field mechanical model coupled with single-phase fluid flow in both the matrix and the fracture. The model is guaranteed to satisfy energy conservation during fracture propagation. Here, the system of equations is solved using the introduced solution procedure and a novel preconditioner that accounts for the complex fluid-structure interaction. The proposed phase-field model is tested against several benchmark problems on solid-fluid coupling, fluid-driven fracture propagation and rate-dependent viscoelastic deformation. The model serves as a strong basis for investigating rate-dependent fracturing experiments and for making predictions of material behaviors under new conditions.

42 ENGINEERING↗

DOE OSTI2022

A two-fluid single-column model of turbulent shallow convection, Part III: Results and parameter sensitivity

Two-fluid modelling has recently emerged as a promising approach to representing cumulus convection in weather and climate models. This study applies the two-fluid model described in Part II Thuburn et al., 2021b to a shallow cumulus convection case study over land (ARM). Large eddy simulation data is used to tune the majority of the closures that determine the properties of entrained and detrained air. The two-fluid model is generally able to reproduce the profiles of the mean and turbulent quantities over all stages of the diurnal cycle. As such, the initiation of shallow convection and the evolution of the cloud layer are well captured. The robustness of the two-fluid model is further verified using a steady-state test case (BOMEX), in which the cloud properties are also well modelled.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

A space-time parallel algorithm with adaptive mesh refinement for computational fluid dynamics

This work describes a space-time parallel algorithm with space-time adaptive mesh refinement (AMR). AMR with subcycling is added to multigrid reduction-in-time (MGRIT) in order to provide solution efficient adaptive grids with a reduction in work performed on coarser grids. This algorithm is achieved by integrating two software libraries: XBraid (Parallel time integration with multigrid. https://computation.llnl.gov/projects/parallel-timeintegration-multigrid) and Chombo (Chombo software package for AMR applications—design document, 2014). The former is a parallel time integration library using multigrid and the latter is a massively parallel structured AMR library. Employing this adaptive space-time parallel algorithm is Chord (Comput Fluids 123:202–217, 2015), a computational fluid dynamics (CFD) application code for solving compressible fluid dynamics problems. For the same solution accuracy, speedups are demonstrated from the use of space-time parallelization over the time-sequential integration on Couette flow and Stokes’ second problem. On a transient Couette flow case, at least a 1.5× speedup is achieved, and with a time periodic problem, a speedup of up to 13.7× over the time-sequential case is obtained. In both cases, the speedup is achieved by adding processors and exploring additional parallelization in time. The numerical experiments show the algorithm is promising for CFD applications that can take advantage of the time parallelism. Future work will focus on improving the parallel performance and providing more tests with complex fluid dynamics to demonstrate the full potential of the algorithm.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

The Impact of Wettability on the Co-moving Velocity of Two-Fluid Flow in Porous Media

Abstract The impact of wettability on the co-moving velocity of two-fluid flow in porous media is analyzed herein. The co-moving velocity, developed by Roy et al. (Front Phys 8:4, 2022), is a novel representation of the flow behavior of two fluids through porous media. Our study aims to better understand the behavior of the co-moving velocity by analyzing simulation data under various wetting conditions. We analyzed 46 relative permeability curves based on the Lattice–Boltzmann color fluid model and two experimentally determined relative permeability curves. The analysis of the relative permeability data followed the methodology proposed by Roy et al. (Front Phys 8:4, 2022) to reconstruct a constitutive equation for the co-moving velocity. Surprisingly, the coefficients of the constitutive equation were found to be nearly the same for all wetting conditions. On the basis of these results, a simple approach was proposed to reconstruct the relative permeability of the oil phase using only the co-moving velocity relationship and the relative permeability of the water phase. This proposed method provides new information on the interdependence of the relative permeability curves, which has implications for the history matching of production data and the solution of the associated inverse problem. The research findings contribute to a better understanding of the impact of wettability on fluid flow in porous media and provide a practical approach for estimating relative permeability based on the co-moving velocity relationship, which has never been shown before.

Engineering↗

DOE OSTI2026

Selective transport of light vs. heavy rare earth elements by sulfate/bisulfate complexes in hydrothermal fluids

Here, this study explores the transport of rare earth elements (REE) in acidic sulfate-bearing hydrothermal fluids and the implications for the fractionation of light/heavy REE in critical mineral deposits. The speciation of Nd (light REE) and Yb (heavy REE) sulfate complexes were determined via in situ Raman spectroscopy using fused SiO 2 capillary cells up to 300 ºC at saturated water vapor pressure and in a hydrothermal diamond anvil cell up to 500 ºC and 540 MPa. The REE monosulfate (REESO 4 + ) and REE disulfate (REE(SO 4 ) 2 - ) species are stable below 150 to 250 ºC but become less stable at higher temperatures, particularly the light REE, due to the decreased solubility of REE sulfate solids. At higher pressure, these REE sulfate complexes display an increased stability field up to 400 ℃. The REE bisulfate complex (REEHSO 4 2+ ) was identified with a wide stability field below 400 ºC for the HREE in acidic Yb 2 (SO 4 ) 3 -bearing solutions, whereas in Nd 2 (SO 4 ) 3 -bearing solutions, the LREE bisulfate complex is restricted to below 100 ℃. These results suggest that bisulfate is a previously unrecognized selective ligand for heavy REE transport at low temperature in acidic oxidized hydrothermal fluids. Such fluids are responsible for hydrothermal alteration in many REE deposits. Prediction of phase stabilities across pressure, temperature, and composition space (P-T- x ) is crucial for predicting the role of aqueous REE sulfate complexes in the mobilization of REE in crustal fluids.

58 GEOSCIENCES↗

DOE OSTI2023

Uncertain characterization of reservoir fluids due to brittleness of equation of state regression

Equations of state (EoS) play a central role in modeling the phase equilibrium of fluid mixtures. Their parameterization involves fitting a model to experimental data, i.e., solving a nonlinear, non-convex, multivariate optimization problem. The latter requires one to select design variables, domains of definition for each variable, and weights assigned to individual measurements. We demonstrate that subjective choices of an optimization algorithm and an initial guess also impact the regression process. Consequently, EoS predictions are fundamentally uncertain even after the EoS tuning to a limited set of experimental data points. We demonstrate this observation for two hydrocarbon reservoir fluids, in which five properties of the heaviest carbon fraction are treated as design variables. While all the optimization algorithms and initial guesses match experimental data for the gas and liquid properties, the resulting EoS parameterizations lead to dramatically different predictions of the fluid’s thermophysical behavior in the unsampled pressure and temperature regions. In conclusion, we propose the probabilistic treatment of design variables to quantify the predictive uncertainty of the resulting fluid models.

15 GEOTHERMAL ENERGY↗

DOE OSTI2025

"Hidden" hydrothermal technical potential & technoeconomics: Revealing permeability & fluids with more data

Historical hydrothermal estimates have largely relied on temperature or heat flow estimates ignoring the need for natural flowing fluids. More accurate hydrothermal estimates require some indication of permeability and fluids that naturally exist in the subsurface. This paper describes a novel approach that includes proxies of permeability and fluids in hydrothermal estimates by leveraging the relatively data-rich Great Basin. Specifically, nameplate capacities (megawatts) of operating geothermal plants, negative (0 megawatt) locations and 48 geophysical and geologic features are used to used in eXtreme Gradient Boosting (XGBoost) regression to make hydrothermal capacity predictions. Additionally, this work inputs the XGBoost-based hydrothermal predictions into the Renewable Energy Potential (reV) model to quantify technical capacity, its uncertainty and techno-economics. Compared to historical hydrothermal estimates, these predictions adhere to the 37 operating geothermal plants and negative locations. We present a method for subsampling the negative sites to bring the labels into balance that uses the geologic domain knowledge to proportionally represent negatives. Overall, the distributions of the hydrothermal technical capacity and the site levelized cost of energy are respectively much tighter, lower and more accurate than the previous estimates for the Great Basin, as they include geological and geophysical surrogates for permeability and fluids. Percentile (50th and 90th, median and high estimate, respectively) models provide bookends for these metrics.

13 HYDRO ENERGY↗

DOE OSTI2020

Benchmark of interfacial area concentration approaches for the two-fluid model in gas-dispersed condensing flow

Accurate predictions of interfacial area concentration (IAC) are required for closure of the condensation phase change term. The interfacial area transport equation (IATE) can dynamically predict interfacial area concentration and is increasingly being used in the benchmarking of phase change flows over static based correlations which require a flow regime map. For higher flow regimes, the two-group two-fluid IATE model can separately model the transport of spherical bubbles and cap/slug bubbles. Recently, a modified formulation of the one-group and two-group two-fluid model with interfacial area transport equation was proposed for gas-dispersed condensing flows. Three datasets have been used for validation consisting of condensing two-phase flow data in the unheated section of a vertical annulus with conditions spanning a range of pressures, inlet subcoolings and mass fluxes for benchmarking the various IAC approaches. For bubbly flows, the coupled void transport - IATE simulation results in good agreement in the predictions of the void fraction and the interfacial area concentration under nearly all sixty conditions. Considering the proposed two-group two-fluid IATE model formulation, the group-2 Nusselt number correlation is investigated to account for the appropriate heat transfer length scale for group-2 bubbles. Validation of the proposed two-group two-fluid model against the new dataset shows good agreement with experimental data with significant improvement over the one-group IATE model for conditions with substantial group-2 void fraction throughout the simulation domain.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2025

Probing Carbon Mineralization Mechanisms in Pore and Bulk Fluids by Harnessing Architected Calcium Silicates

The ability to synthesize materials with well-controlled pore structures gives us unprecedented control over probing fluid interactions with reactive interfaces and advancing calibrated insights into coupled chemo-morphological interactions. One of the primary challenges in developing crystalline silicate materials lies in achieving ordered pore structures. Existing approaches of producing amorphous mesoporous metal silicates via sol–gel methods and heat-treatment of these materials to produce crystalline phases cause the pore structures in the amorphous phases to collapse. To overcome this challenge, carbon coating of amorphous mesoporous calcium silicate particles is carried out to retain the pore structure, while the material is heated to produce crystalline calcium silicate with calcium sulfate inclusions. The pore diameter in these materials is about 3.9 nm, with a surface area and a pore volume of 28.75 m 2 /g and 0.092 cm 2 /g, respectively. The mechanisms of carbon mineralization are investigated by reacting architected calcium silicate with 1 M Na 2 CO 3 and monitoring the evolution in the structural phases using operando wide-angle X-ray scattering (WAXS) measurements. Formation of stable calcium carbonate polymorph or calcite and metastable calcium carbonate polymorph or vaterite in pore and bulk fluids, respectively, resulting from the reaction between Na 2 CO 3 and CaSiO 3 , are noted. The mechanisms associated with carbon mineralization are delineated using ReaxFF molecular dynamics (MD) simulations. The surface dissolution reaction is initiated by 2H + ions that replace a Ca 2+ ion in the Ca–silicate matrix. Ca 2+ ions in the solution initially react with water to form calcium hydroxide and eventually form calcium (bi)carbonate. A slow and gradual increase in the formation of sodium silicate in the solution resulting from the reactions of silicic acid or the silicon dioxide reaction with sodium hydroxide is noted. When carbon mineralization occurs in environments bearing interfacial fluids, calcite is the dominant calcium carbonate polymorph, as determined using experiments with pore fluids and molecular-scale simulations. In conclusion, these studies provide fundamental insights into the mechanisms underlying the carbon mineralization of calcium silicate informed by experiments and molecular-scale simulations.

Calcium↗

DOE OSTI2024

Molecular Modes Elucidate the Nuclear Magnetic Resonance Relaxation of Viscous Fluids

The Bloembergen, Purcell, and Pound (BPP) theory of nuclear magnetic resonance (NMR) relaxation in fluids dating back to 1948 continues to be the linchpin in interpreting NMR relaxation data in applications ranging from characterizing fluids in porous media to medical imaging (MRI). The BPP theory is founded on assuming molecules are hard spheres with 1 H– 1 H dipole pairs reorienting randomly; assumptions that are severe in light of modern understanding of liquids. Nevertheless, it is intriguing to this day that the BPP theory was consistent with the original experimental data for glycerol, a hydrogen-bonding molecular fluid for which the hard-sphere-rigid-dipole assumption is inapplicable. To better understand this incongruity, atomistic molecular simulations are used to compute 1 H NMR T 1 relaxation dispersion (i.e., frequency dependence) in two contrasting cases: glycerol, and a (non hydrogen-bonding) viscosity standard. At high viscosities, simulations predict distinct functional forms of T 1 for glycerol compared to the viscosity standard, in agreement with modern measurements, yet both in contrast to BPP theory. The cause of these departures from BPP theory is elucidated, without assuming any relaxation models and without any free parameters, by decomposing the simulated T 1 response into dynamic molecular modes for both intramolecular and intermolecular interactions. The decomposition into dynamic molecular modes provides an alternative framework to understand the physics of NMR relaxation for viscous fluids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Complexity of Fault Rupture and Fluid Leakage in Shale: Insights From a Controlled Fault Activation Experiment

Abstract We observed rupture growth caused by controlled fluid injections at 340‐m depth within a fault zone in the low‐permeability Opalinus Clay in the Mont Terri Underground Research Laboratory (Switzerland). The rupture mechanisms were evaluated using measurements of the three‐component borehole wall displacements and fluid pressure in two sections of the fault zone and located horizontally 3 m apart from each other. One section was set across a secondary segment of the fault and used for stepwise fluid injection intended to trigger rupture growth. The other section was set across the principal shear zone of the fault for monitoring. After stepwise pressure increase up to 5.95 MPa at injection, rupture initiated as slip activation, followed by an overall opening of the fault planes connected to the injection. After 19 s of continued injection, displacements arrived at the monitoring point on the principal shear zone. These displacements are about 2.4 times larger than in the secondary fault segment. Overall, the displacements corresponded to a normal fault activation. About 9 s after the displacement front arrived, a strong pressure increase of 4.17 MPa was measured at the monitoring point, indicating a hydraulic connection had formed along the initially very low permeability fault planes between the injection and the monitoring points. Our analyses highlight that the fault activation is consistent with the state of stress but that injection pressure must be close to the normal stress acting on the fault for permeability to be generated and for fluid leakage to occur.

Guglielmi, Yves↗

DOE OSTI2020

Seismicity and Stress Associated With a Fluid-Driven Fracture: Estimating the Evolving Geometry

A coupled approach, combining the theory of rate- and state-dependent friction and methods from poroelasticity, forms the basis for a quantitative relationship between displacements and fluid leak-off from a growing fracture and changes in the rate of seismic events in the region surrounding the fracture. Poroelastic Green's functions link fracture aperture changes and fluid flow from the fracture to changes in the stress field and pore pressure in the adjacent formation. The theory of rate- and state-dependent friction provides a connection between Coulomb stress changes and variations in the rate of seismic events. Numerical modeling indicates that the Coulomb stress changes can vary significantly between formations with differing properties. The relationship between the seismicity rate changes and the changes in the formation stresses and fluid pressure is nonlinear, but a transformation produces a quantity that is linearly related to the aperture changes and fluid leak-off from the fracture. The methodology provides a means for mapping changes in seismicity into fracture aperture changes and to image an evolving fracture. An application to observed microseismicity associated with a hydrofracture reveals asymmetric fracture propagation within two main zones, with extended propagation in the upper zone. Furthermore, the time-varying volume of the fracture agrees with the injected volume, given by the integration of rate changes at the injection well, providing validation of the estimated aperture changes.

58 GEOSCIENCES↗