Search NASA⌕ Search

SEARCH · Search NASA

Results for “Group Contribution Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

10 MeV electrons irradiation effects in variously doped n-GaN

We studied 10 MeV electron irradiation effects in a group of n-GaN films grown by standard metalorganic chemical vapor deposition (MOCVD) and by epitaxial lateral overgrowth (ELOG) techniques. The samples were either undoped or Si-doped, so that the shallow donor concentrations ranged from 10{sup 14} cm{sup -3} to 3 x 10{sup 18} cm{sup -3}. It was found that electron irradiation led to the compensation of n-type conductivity and that the carrier removal rate substantially increased with an increase in the starting donor concentration. For the MOCVD samples, it was observed that the main compensating defect introduced by electrons was a 0.15 eV electron trap detected by admittance spectroscopy. Once the Fermi level crossed the level of these traps two other centers with activation energies of 0.2 and 1 eV were found to contribute to the compensation, so that after high doses, the Fermi level in moderately doped samples was pinned near E{sub c}-1 eV. In ELOG samples the 0.15 eV electron traps were not detected. Instead only the 0.2 and 1 eV traps were introduced by irradiation. The carrier removal rate in the ELOG n-GaN was found to be measurably lower than for MOCVD samples with a similar doping level. The results are compared to previously published data and possible models of compensation are discussed.

36 MATERIALS SCIENCE↗

Correction of confidence intervals in excess relative risk models using Monte Carlo dosimetry systems with shared errors

Introduction: Measurement errors are ubiquitous in epidemiological studies, especially for doses arising from environmental and occupational exposures, which are difficult to assess. Correction methods for independent measurement errors, have been comprehensively described elsewhere, including regression calibration, simulation extrapolation (SIMEX), etc. However, when exposure estimates are constructed using complicated physical and biological models, uncertainties in the dosimetry system can become very complex. In such systems, uncertainties in some parameters may affect a large group of study participants simultaneously, and hence are “shared” as opposed to independent dosimetric uncertainties. Representing the structure of the uncertainty in the dosimetry by providing multiple realizations of possible dose has been described for several studies. The goal of this paper is to implement, and explore the properties of, a generalized estimating equation-based approach to shared uncertainties based on principles described in an earlier paper. Methods: The effects of shared and unshared dosimetry error on parameter estimates and confidence intervals in a generalized excess relative risk model are examined. A post-hoc correction method is implemented that constructs corrected confidence intervals based on an underlying variance structure described in an earlier paper. In this correction method it is assumed that the estimated slope parameter in a linear excess relative risk model is distributed as a mixture of normal and lognormal components. A simulation study of the behavior of this correction was developed based on multiple realizations provided by the Monte Carlo dosimetry system used for the plutonium exposures in the Mayak Worker Cohort and a risk model with close similarity to that used in analyses of lung cancer data in that cohort. Results: In the simulation study we found that shared dose errors severely degraded the coverage probabilities of confidence limits for the slope parameter in the linear excess relative risk model relating uncertain exposure to lung cancer risk. Using our correction method to adjust the confidence intervals provided much improved coverage probabilities for this parameter. A smaller amount of degradation in confidence interval coverage for other parameters (e.g. those in the baseline and dose modification terms) was noted, and the proposed correction method also improved coverage for these parameters as well. Discussion: Compared to other recently described methods our proposed correction method relies on relatively familiar software to fit dose response models. The basic modeling philosophy described here first uses existing Poisson regression methods to estimate parameters in the excess relative risk model; in this first stage mean dose (computed from the multiple realizations) is used as the independent variable in the regression. Once the model is fit we then correct (widen) the standard errors for all parameters using the proposed correction method. The simulation studies indicate that the methods described here are an important contribution to the available tools for dealing with shared measurement errors in complex risk analysis.

61 RADIATION PROTECTION AND DOSIMETRY↗

Kaon physics without new physics in $$ \varepsilon _K$$

Abstract Despite the observation of significant suppressions of $$b\rightarrow s\mu ^+\mu ^-$$ b → s μ + μ - branching ratios no clear sign of New Physics (NP) has been identified in $$\Delta F=2$$ Δ F = 2 observables $$\Delta M_{d,s}$$ Δ M d , s , $$\varepsilon _K$$ ε K and the mixing induced CP asymmetries $$S_{\psi K_S}$$ S ψ K S and $$S_{\psi \phi }$$ S ψ ϕ . Assuming negligible NP contributions to these observables allows to determine CKM parameters without being involved in the tensions between inclusive and exclusive determinations of $$|V_{cb}|$$ | V cb | and $$|V_{ub}|$$ | V ub | . Furthermore this method avoids the impact of NP on the determination of these parameters present likely in global fits. Simultaneously it provides SM predictions for numerous rare K and B branching ratios that are most accurate to date. Analyzing this scenario within $$Z^\prime $$ Z ′ models we point out, following the 2009 observations of Monika Blanke and ours of 2020, that despite the absence of NP contributions to $$\varepsilon _K$$ ε K , significant NP contributions to $$K^+\rightarrow \pi ^+\nu {\bar{\nu }}$$ K + → π + ν ν ¯ , $$K_{L}\rightarrow \pi ^0\nu {\bar{\nu }}$$ K L → π 0 ν ν ¯ , $$K_S\rightarrow \mu ^+\mu ^-$$ K S → μ + μ - , $$K_L\rightarrow \pi ^0\ell ^+\ell ^-$$ K L → π 0 ℓ + ℓ - , $$\varepsilon '/\varepsilon $$ ε ′ / ε and $$\Delta M_K$$ Δ M K can be present. In the simplest scenario, this is guaranteed, as far as flavour changes are concerned, by a single non-vanishing imaginary left-handed $$Z^\prime $$ Z ′ coupling $$g^L_{sd}$$ g sd L . This scenario implies very stringent correlations between the Kaon observables considered by us. In particular, the identification of NP in any of these observables implies automatically NP contributions to the remaining ones under the assumption of non-vanishing flavour conserving $$Z^\prime $$ Z ′ couplings to $$q{\bar{q}}$$ q q ¯ , $$\nu {\bar{\nu }}$$ ν ν ¯ , and $$\mu ^+\mu ^-$$ μ + μ - . A characteristic feature of this scenario is a strict correlation between $$K^+\rightarrow \pi ^+\nu {\bar{\nu }}$$ K + → π + ν ν ¯ and $$K_{L}\rightarrow \pi ^0\nu {\bar{\nu }}$$ K L → π 0 ν ν ¯ branching ratios on a branch parallel to the Grossman-Nir bound. Moreover, $$\Delta M_K$$ Δ M K is automatically suppressed as seems to be required by the results of the RBC-UKQCD lattice QCD collaboration. Furthermore, there is no NP contribution to $$K_L\rightarrow \mu ^+\mu ^-$$ K L → μ + μ - which otherwise would bound NP effects in $$K^+\rightarrow \pi ^+\nu {\bar{\nu }}$$ K + → π + ν ν ¯ . Of particular interest are the correlations of $$K^+\rightarrow \pi ^+\nu {\bar{\nu }}$$ K + → π + ν ν ¯ and $$K_{L}\rightarrow \pi ^0\nu {\bar{\nu }}$$ K L → π 0 ν ν ¯ branching ratios and of $$\Delta M_K$$ Δ M K with the ratio $$\varepsilon '/\varepsilon $$ ε ′ / ε . We investigate the impact of renormalization group effects in the context of the SMEFT on this simple scenario.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

I Asked 30,000 People in the Nuclear Industry About Safety Culture; This is What I Learned - 19204

Organizations in the nuclear industry place a high value on maintaining the safety of the workforce and community. Some of these organizations do a better job than others when it comes to developing and sustaining a healthy safety culture. We spent six years studying nuclear organizations to better understand the factors that influence safety culture. We used mixed methods to evaluate perceptions of safety culture in these organizations including administering a valid and reliable safety culture survey, conducting one-on-one interviews with managers, and facilitating focus groups with members of the workforce. We analyzed the quantitative and qualitative data collected from more than 30,000 workers in U.S. based organizations. All of the organizations had a nuclear component to their operations. They operated nuclear reactors, processed nuclear materials, decontaminated and decommissioned buildings with radiological contamination, cleaned-up hazardous/mixed waste, and conducted basic science research and development. We talked to craft workers, technicians, engineers, scientific professionals, support personnel, production workers, supervisors and managers. We conducted extensive statistical analysis and learned that, with rare exception, there is a gap between the perceptions of managers and the workforce that they manage. Managers almost always have a more positive perception of safety culture than the people that are actually performing the work. It is not a question of whether there will be a gap; it is simply a matter of the magnitude of the gap. We also learned through exploratory factor analysis that there is one dominant factor that accounted for almost all (75%) of the variance in the perceptions of safety culture. It was the behavior of the leaders, the decisions they made, and the systems they implemented that most influenced the workforce's perception of safety culture. Personal accountability for safety accounted for 14% of the variance, communication and reporting accounted for another 6%. Everything else accounted for the remaining 5%. Management systems, decision making and behavior is the dominant factor and managers almost always have a more positive perception than the people that work for them. People that work in organizations where management exhibits positive decision-making and safety-related behaviors tend to have more positive perceptions of safety culture. Based upon these results, we developed a theory that there were a few important factors on which management could focus on if they sought to influence the safety culture in their organization. Our experience and research suggests that management often fails to recognize five root causes of employee discontent. Employees seek: - To be recognized as an individual; - To be respected; - A sense of stability; - Fairness; - To make a difference. Understanding the perceptions of the workforce is critical because perceptions influence attitudes, which contribute to behaviors that determine individual performance. An organisation's performance is simply the sum of the performance of all of the members of that organization. To change an organisation's safety culture, interventions should target management behavior and decision making for the greatest return on investment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Regeneration of ammonia borane spent fuel

A necessary target in realizing a hydrogen (H{sub 2}) economy, especially for the transportation sector, is its storage for controlled delivery, presumably to an energy producing fuel cell. In this vein, the U.S. Department of Energy's Centers of Excellence (CoE) in Hydrogen Storage have pursued different methodologies, including metal hydrides, chemical hydrides, and sorbents, for the expressed purpose of supplanting gasoline's current > 300 mile driving range. Chemical H{sub 2} storage has been dominated by one appealing material, ammonia borane (H{sub 3}N-BH{sub 3}, AB), due to its high gravimetric capacity of H{sub 2} (19.6 wt %) and low molecular weight (30.7 g mol{sup -1}). In addition, AB has both hydridic and protic moieties, yielding a material from which H{sub 2} can be readily released in contrast to the loss of H{sub 2} from C{sub 2}H{sub 6} which is substantially endothermic. As such, a number of publications have described H{sub 2} release from amine boranes, yielding various rates depending on the method applied. The viability of any chemical H{sub 2} storage system is critically dependent on efficient recyclability, but reports on the latter subject are sparse, invoke the use of high energy reducing agents, and suffer from low yields. Our group is currently engaged in trying to find and fully demonstrate an energy efficient regeneration process for the spent fuel from H{sub 2} depleted AB with a minimum number of steps. Although spent fuel composition depends on the dehydrogenation method, we have focused our efforts on the spent fuel resulting from metal-based catalysis, which has thus far shown the most promise. Metal-based catalysts have produced the fastest rates for a single equivalent of H{sub 2} released from AB and up to 2.5 equiv. of H{sub 2} can be produced within 2 hours. While ongoing work is being carried out to tailor the composition of spent AB fuel, a method has been developed for regenerating the predominant product, polyborazylene (PB) which can be obtained readily from the decomposition of borazine or from nickel carbene catalyst dehydrogenation. In this cycle, the PB is digested with benzenedithiol to yield two products which can both be converted to AB using Bu{sub 3}SnH and BU{sub 2}SnH{sub 2} as reductants. However, in a real world situation the process becomes more complicated for several reasons. Bu{sub 2}SnH{sub 2} is thermally unstable and therefore not viable in a process scale operation. This has led to the development of Bu{sub 3}SnH as the sole reductant although this requires an additional amine exchange step in order to facilitate the reduction to an amine-borane which can then be converted to AB. The tin by-products also need to be recycled in order to maximize the overall energy efficiency and therefore minimize the overall cost of the process. In addition, on an industrial scale, the mass of the tin reductant generates significant cost due to the manipulation of the relatively large quantities involved so reducing the mass at this stage would be of vast significance. We will discuss further developments made to the tin recycle component of the cycle (including methods to minimize tin usage) and investigate new methods of reduction of the digested products, primarily focusing on lighter reductants, including lighter analogs of Bu{sub 2}SnH{sub 2} and Bu{sub 3}SnH. These advances will have a significant impact on the cost of production and therefore the viability of AB as a fuel. Minimization of tin reagents and their recycle will contribute to reduction of the overall cost of AB regeneration and all stages of AB regeneration have been demonstrated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mild Catalytic methods for Alkyl-Alkyl Bond Formation

Overview of Research Goals and Accomplishments for the Period 07/01/06 – 06/30/07: Our overall research goal is to transform the rapidly emerging synthetic chemistry involving alkyl-alkyl cross-couplings into more of a mechanism-based field so that that new, rationally-designed catalysts can be performed under energy efficient conditions. Our specific objectives for the previous year were 1) to obtain a proper electronic description of an active catalyst for alkyl-alkyl cross-coupling reactions and 2) to determine the effect of ligand structure on the rate, scope, selectivity, and functional group compatibility of C(sp3)-C(sp3) cross-coupling catalysis. We have completed both of these initial objectives and established a firm base for further studies. The specific significant achievements of the current grant period include: 1) we have performed magnetic and computational studies on (terpyridine)NiMe, an active catalyst for alkyl-alkyl cross couplings, and have discovered that the unpaired electron resides heavily on the terpyridine ligand and that the proper electronic description of this nickel complex is a Ni(II)-methyl cation bound to a reduced terpyridine ligand; 2) we have for the first time shown that alkyl halide reduction by terpyridyl nickel catalysts is substantially ligand based; 3) we have shown by isotopic labeling studies that the active catalyst (terpyridine)NiMe is not produced via a mechanism that involves the formation of methyl radicals when (TMEDA)NiMe2 is used as the catalyst precursor; 4) we have performed an extensive ligand survey for the alkyl-alkyl cross-coupling reactions and have found that electronic factors only moderately influence reactivity in the terpyridine-based catalysis and that the most dramatic effects arise from steric and solubility factors; 5) we have found that the use of bis(dialkylphosphino)methanes as ligands for nickel does not produce active catalysts for cross-coupling but rather leads to bridging hydride complexes of varying geometries; 6) we have determined that the geometry of aforementioned bridging hydride complexes is largely determined by external forces such as hydrogen bonding interactions and crystal packing forces; 7) we have found that the rate of reductive elimination of alkane from a (pyridyl-2-pyrrolide)AuMe2 complex is severely inhibited due to the rigid geometry of the pyridyl-2-pyrrolide ligand; 8) we have prepared, structurally characterized, and explored the reactivity of 1-adamantylzinc reagents as model nucleophiles for sterically challenging alkyl-alkyl cross-coupling reactions. The continued success of this work will lead to alkyl-alkyl cross-coupling catalysts with broad scope and selectivities. The work has potential to significantly impact science and technologies of interest to the DOE as the chemistry is focused on developing useful reactions using reagents that can be directly prepared from petroleum and natural gas feedstocks. Moreover, the developing synthetic chemistry can profoundly affect the way materials, fine chemicals, and drugs are made. Since the methodology we are developing can shorten existing synthetic protocols, proceed at room temperature, and operate under environmentally benign conditions, it can greatly reduce energy expenditures, especially considering the contribution of the chemical manufacturing field to the gross domestic product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electromagnetic mass splittings of the low lying hadrons and quark masses from 2+1 flavor lattice QCD+QED

Results computed in lattice QCD+QED are presented for the electromagnetic mass splittings of the low-lying hadrons. These are used to determine the renormalized, nondegenerate, light quark masses. It is found that m{sub u}{sup MS}=2.24(10)(34), m{sub d}{sup MS}=4.65(15)(32), and m{sub s}{sup MS}=97.6(2.9)(5.5) MeV at the renormalization scale 2 GeV, where the first error is statistical and the second systematic. We find the lowest-order electromagnetic splitting (m{sub {pi}{sup +}}-m{sub {pi}{sup 0}}){sub QED}=3.38(23) MeV, the splittings including next-to-leading order, (m{sub {pi}{sup +}}-m{sub {pi}{sup 0}}){sub QED}=4.50(23) MeV, (m{sub K{sup +}}-m{sub K{sup 0}}){sub QED}=1.87(10) MeV, and the m{sub u}{ne}m{sub d} contribution to the kaon mass difference, (m{sub K{sup +}}-m{sub K{sup 0}}){sub (m{sub u}-m{sub d})}=-5.840(96) MeV. All errors are statistical only, and the next-to-leading-order pion splitting is only approximate in that it does not contain all next-to-leading-order contributions. We also computed the proton-neutron mass difference, including for the first time, QED interactions in a realistic 2+1 flavor calculation. We find (m{sub p}-m{sub n}){sub QED}=0.383(68) MeV, (m{sub p}-m{sub n}){sub (m{sub u}-m{sub d})}=-2.51(14) MeV (statistical errors only), and the total m{sub p}-m{sub n}=-2.13(16)(70) MeV, where the first error is statistical, and the second, part of the systematic error. The calculations are carried out on QCD ensembles generated by the RBC and UKQCD collaborations, using domain wall fermions and the Iwasaki gauge action (gauge coupling {beta}=2.13 and lattice cutoff a{sup -1}{approx_equal}1.78 GeV). We use two lattice sizes, 16{sup 3} and 24{sup 3} ((1.8 fm){sup 3} and (2.7 fm){sup 3}), to address finite-volume effects. Noncompact QED is treated in the quenched approximation. The valence pseudoscalar meson masses in our study cover a range of about 250 to 700 MeV, though we use only those up to about 400 MeV to quote final results. We present new results for the electromagnetic low-energy constants in SU(3) and SU(2) partially quenched chiral perturbation theory to the next-to-leading order, obtained from fits to our data. Detailed analysis of systematic errors in our results and methods for improving them are discussed. Finally, new analytic results for SU(2){sub L}xSU(2){sub R}-plus-kaon chiral perturbation theory, including the one-loop logs proportional to {alpha}{sub em}m, are given.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High manganese redox variability and manganate predominance in temperate soil profiles as determined by X-ray absorption spectroscopy

Manganese speciation is a key to understanding the fate of contaminants, nutrients, and organic matter in soils. To date, quantification of Mn species in bulk soils has been performed mainly by sequential extraction methods and rarely supported by spectroscopic analysis. In order to obtain quantitative information on the Mn species inventory of soils, we investigated 46 soil horizons (<2-mm fraction, 45.1–2,280 mg/kg Mn) of nine typical Central European soils (Cambisols, Chernozems, Luvisols, Podzol, Stagnosol) by chemical Mn analyses and Mn K-edge X-ray absorption spectroscopy, and related speciation results to major soil properties. Amounts of Mn 2+ , Mn 3+ , and Mn 4+ and the average oxidation state of Mn were evaluated by linear combination fitting (LCF) of X-ray absorption near edge structure (XANES) spectra. Additionally, we used extended X-ray absorption fine structure (EXAFS) spectroscopy to identify and quantify major Mn species. For this, EXAFS spectra of 20 organic and mineral soil samples from five soils (Cambisols, Chernozem, Luvisol) were analyzed by LCF and shell fitting. XANES analyses revealed a high Mn redox variability in organic surface layers, with Mn 2+ being most abundant (≤100%, $\overline{x}$ = 54%), followed by Mn 3+ (≤80%, $\overline{x}$ = 32%) and Mn 4+ (≤55%, $\overline{x}$ = 14%). Mineral soil horizons contained significantly less Mn 2+ (≤56%, $\overline{x}$ = 23%), about equal quantities of Mn 3+ (≤68%, $\overline{x}$ = 31%), and were enriched in Mn 4+ (≤89%, $\overline{x}$ = 46%). EXAFS analyses implied the presence of six major Mn species groups: manganates, organically complexed Mn, Mn(III) oxyhydroxides, silicate-bound Mn, Mn oxides without tunnel- or layer structure, and physisorbed Mn. In litter horizons, Mn was mainly present in organic complexes (58–91%, $\overline{x}$ = 78%) and as physisorbed Mn (≤15%), but individual horizons also comprised manganates, Mn(III) oxyhydroxides, and silicate-bound Mn. Manganates, likely mixtures of phyllomanganates with hexagonal layer symmetry and tectomanganates, dominated in all mineral soil horizons (37–94%, $\overline{x}$ = 67%). Correlation analysis showed that manganates dissolve completely during dithionite-citrate and acid ammonium oxalate extractions, and suggested that Mn 4+ -rich manganates preferentially form under less acidic soil conditions, partly by oxidation of organically complexed Mn(II), and that they are enriched in the soil clay fraction. Mineral soil horizons also contained minor quantities of organically complexed Mn (≤39%, $\overline{x}$ = 11%), silicate-bound Mn (≤30%, $\overline{x}$ = 8%), Mn(III) oxyhydroxides (≤37%, $\overline{x}$ = 7%), Mn oxides without tunnel- or layer structure (≤18%, $\overline{x}$ = 5%), and physisorbed Mn (≤14%, $\overline{x}$ <1%). The detection of Mn(III) oxyhydroxides such as feitknechtite (β-MnOOH) or groutite (α-MnOOH) as well as the spinel hausmannite (Mn 3 O 4 ) in acidic soils is remarkable, since their formation is normally linked to neutral or alkaline pH conditions. Minor contributions of silicate-bound Mn indicate the release of Mn from primary minerals already at early stages of soil formation, and low concentrations of physisorbed Mn suggest that exchangeable Mn is rapidly converted into manganates in oxic soils. In conclusion, the predominance of manganates in mineral soils has far-reaching implications for the functioning of soils and biogeochemical element cycles, as these minerals play an important role in metal binding, plant nutrition, and redox-related processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid State Quantum Refrigeration Superconducting, Absorption and Measurement Based (Final Technical Report)

During this DOE grant, DE-SC0017890, in place for the past six years, all proposed research was carried out and published in peer-reviewed papers, as well as other projects that emerged during the research. In that effort the research team accomplished all proposed research, as well as many closely related research projects discovered and conceived of during the grant. These works included “Efficient Quantum Measurement Engines”, a work published in Physical Review Letters, giving a theory of quantum measurement-based engines, which uses quantum measurement as a resource. These engines are designed to efficiently convert energy from the stochastic quantum measurement process into useful work. Further publications include “Experimental Realization of a Quantum Dot Energy Harvester”, a joint theory and experimental work in collaboration with the group of Charles Smith in Cambridge, UK, as well as long time theoretical collaborators, Rafael Sánchez and Björn Sothmann. This work, featured as an Editor’s Suggestion in Physical Review Letters, realized an earlier theoretical proposal of ours, whereby two resonant tunneling quantum dots are connected to a central electronic cavity that is heated by a hot energy source. We also published “Superconducting Quantum Refrigerator: Breaking and Rejoining Cooper Pairs with Magnetic Field Cycles” a work done in collaboration with experimentalist Francesco Giazotto from ENS Pisa, Italy, which also resulted in a patent. This paper, published in Phys. Rev. Applied, advanced the concept of a cyclic fridge based on the normal/superconducting phase transition together with layered materials separated by tunnel junctions. We also completed the proposed research on a heat transistor, publishing “Thermal transistor and thermometer based on Coulomb-coupled conductors”, carried out as a collaboration between my group and theorists Splettstoesser (Lund U., Sweden), Sothmann (U. Duisburg-Essen, Germany), and Sánchez (U. Autónoma de Madrid, Spain). We carried out an analysis of a quantum coupled to a quantum point contact as a sensitive thermometer and heat transistor. We found the optimal statistical estimator for the temperature and compared it with experiments on the same type of devices. We also investigated autonomous quantum absorption refrigerators using quantum dots to cool by using a very hot thermal reservoir to drive heat between two other reservoirs. In the article “Quantifying the quantum heat contribution from a driven superconducting circuit”, we demonstrated that for a driven superconducting circuit, we showed heat flow provided by a hot source to the qubit can be switched on and off by varying external parameters, the frequency and the intensity of the driving. In the work “Stochastic thermodynamic cycles of a mesoscopic thermoelectric engine”, we reconsidered the autonomous thermoelectric heat engine in terms of underlying cycles. Rather than periodic behavior, the cycles were stochastic in nature. Nevertheless, by undertaking a graph theoretical analysis of the elementary transport processed, great quantitative and qualitative insight could be found. We also considered the quantum measurement process and showed that a quantum version of Maxwell’s demon could be related to the work extraction of a quantum system, closely related to arrow-of-time measures for quantum measurement, as described in our article “Thermodynamics of quantum measurement and Maxwell's demon's arrow of time”. This work was selected in Phys. Rev. A as an Editor’s Suggestion. A recent preprint titled “Cyclic Superconducting Quantum Refrigerators Using Guided Fluxon Propagation” accomplished an important piece of this grant: to propose a new kind of quantum refrigerator using the dynamics of fluxons in a type II superconductor. This invention envisioned a race-track type geometry where fluxons are confined. By applying a gradient of magnetic field together with electric current in a Corbino geometry, the circulating fluxons can actively cool a cold reservoir, realizing a new type of cyclic superconducting refrigerator. We also investigated the possibility of thermal control from different points of view. The application of quantum measurement to the system gives a new kind of control on the system of interest – we have pioneered this approach and shown that measurement can boost the thermal power of quantum engines as described in “Continuous measurement boosted adiabatic quantum thermal machines”. The ability to have heat flows on demand is an outstanding challenge, and we have provided new solutions to this problem in Thermal control across a chain of electronic nanocavities” for a chain of electron cavities using gating voltage control. The control methods using qubit/qubit coupling to create absorption fridges at their most fundamental level have also been developed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A stochastic reorganizational bath model for electronic energy transfer

Environmentally induced fluctuations of the optical gap play a crucial role in electronic energy transfer dynamics. One of the simplest approaches to incorporate such fluctuations in energy transfer dynamics is the well known Haken-Strobl-Reineker (HSR) model, in which the energy-gap fluctuation is approximated as white noise. Recently, several groups have employed molecular dynamics simulations and excited-state calculations in conjunction to account for excitation energies’ thermal fluctuations. On the other hand, since the original work of HSR, many groups have employed stochastic models to simulate the same transfer dynamics. Here, we discuss a rigorous connection between the stochastic and the atomistic bath models. If the phonon bath is treated classically, time evolution of the exciton-phonon system can be described by Ehrenfest dynamics. To establish the relationship between the stochastic and atomistic bath models, we employ a projection operator technique to derive the generalized Langevin equations for the energy-gap fluctuations. The stochastic bath model can be obtained as an approximation of the atomistic Ehrenfest equations via the generalized Langevin approach. Based on this connection, we propose a novel scheme to take account of reorganization effects within the framework of stochastic models. The proposed scheme provides a better description of the population dynamics especially in the regime of strong exciton-phonon coupling. Finally, we discuss the effect of the bath reorganization in the absorption and fluorescence spectra of ideal J-aggregates in terms of the Stokes shifts. We find a simple expression that relates the reorganization contribution to the Stokes shifts – the reorganization shift – to the ideal or non-ideal exciton delocalization in a J-aggregate. The reorganization shift can be described by three parameters: the monomer reorganization energy, the relaxation time of the optical gap, and the exciton delocalization length. This simple relationship allows one to understand the physical origin of the Stokes shifts in molecular aggregates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TH-D-16A-01: Medical Physics Workshop: Editorial Vision and Guidance On Writing and Reviewing Papers

On January 1, 2014, editorial leadership of Medical Physics passed from esteemed long-time Editor Bill Hendee to a collective editorial group composed of the three presenters listed above. In this presentation, we would like to outline our vision for the future of Medical Physics and review recent work-in-progress initiatives to implement this vision. Finally, we will close with guidance to authors on how to write a good Medical Physics paper. Vision for Medical Physics and current initiatives: Jeff Williamson, Editor-in-Chief We cannot improve on Dr. Hendee's succinct vision statement “to continue the Journal's tradition of publishing the very best science that propels our discipline forward and improves our contribution to patient care.” More concretely, the Journal should be s the preeminent forum for electronic exchange of cutting edge medical physics science. We seek to identify the best contributions in (a) high impact clinical physics innovations; (b) clinical translation and validation of basic science innovations; or (c) cutting edge basic science developments with potential for patient care improvements. Among the challenges and opportunities we face are: are electronic-only and open access publishing; trends towards more interactive, social-media based scientific communities; and diversification of the medical physics research, authorship, and readership domains, including clinical applications quite foreign to core ABR clinical competencies. To address these issues over the next 3 years, we have reduced the size of our Editorial Board and focused its efforts on improving the Journal's impact through 4 working groups (WGs): WG-1: Review process quality and selectivity Creation of 120 member Board of Associate Editors to improve review uniformity by placing Ms. management in fewer hands New reviewer guidelines and templates Answer: “what is the scope of medical physics research?” Recursive taxonomy for tagging review expertise and article contents WG-2 Improving reader experience Redesigning http://MedPhys.org to host interactive features and gateway to electronic issue archive Experimentation with interactive features beginning with “Point/Counterpoint” Data mining and Journal quality evaluation Find out who are audiences are Identify characteristics of high impact articles Measure effectiveness of innovations Outreach to related communities Special issues presenting high-impact work in designated subcommunities Addressing the needs of new research constituencies: engineers, biophysicists, clinicians Guidelines and templates for reviewers and associate editors: Shiva Das, Therapy Physics Editor We will discuss the Med. Phys. review process and a new initiative to create review templates that attempts to address current shortcomings. Template design is informed by the literature on of the review process effectiveness and practices of other journals. Its goals are to provide authors more constructive criticism to improve the manuscript; quantifying perceived importance and potential impact; and providing structured sections that prompt the reviewer to addresses important technical and editorial elements. While the template is recommended to be used, reviewers could alternatively enter their comments in the older free-form style. The expectations of the template are that it will enable consistently thorough, high quality reviews that accurately separate acceptable vs. substandard submissions but continue our tradition of helping authors to enhance papers with high potential. Ultimately, the goal is to reduce variability and subjectivity in the peer-review process, in turn leading to articles with higher research and clinical impact. We will also discuss interesting perspectives from several journals on aspects of the peer-review process such as public input via comments, influence of author-suggested reviewers, and bias in reviewer selection. Writing good scientific papers and responding to critiques: Mitch Goodsitt, Imaging Physics Editor The essential components of the abstract, introduction, methods, discussion and conclusion sections, as well as the desired writing style and style of the figures and tables will be reviewed. Publishable Medical Physics Ms. must include a clear and concise statement of the novelty and clinical and/or scientific importance of their work. Examples of novelty include: new technical solution to an important clinical problem; new generalizable knowledge; or first demonstration that an existing engineering solution solves a clinical problem. Authors must also include: sufficient background information and rationale; enough detail that the work can be reproduced by others; sufficient statistical analysis to refute or validate their hypothesis, how it compares to; is distinct from, and improves upon others' work; and the limitations of their study. When the authors receive critiques from the referees and associate editor, the authors should provide a detailed point-bypoint response to each comment. We now ask that the authors' rebuttal include the text of the original criticism, the authors' response, and the modified text along with the line numbers in the revised article. We also ask that the new text be highlighted in a different font color in the revised submission. These changes and others will be discussed. Their purpose is to facilitate the review process.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Origin of a sensitive dependence of calculated {beta}{beta}-decay amplitudes on the particle-particle residual interaction

In the present work the sensitivity of calculated {beta}{beta}-decay amplitudes to a realistic residual interaction is analyzed in the framework of the approach of O. A. Rumyantsev and M. H. Urin, Phys. Lett. B 443, 51 (1998). and V. A. Rodin, M. H. Urin, and A. Faessler, Nucl. Phys. A 747, 297 (2005). Both the Gamow-Teller (GT) and Fermi (F) matrix elements M{sup 2}{nu} for two-neutrino {beta}{beta} decay (2{nu}{beta}{beta} decay), along with the monopole transition contributions to the total matrix elements M{sup 0{nu}} of neutrinoless {beta}{beta} decay (0{nu}{beta}{beta} decay), are calculated within the quasiparticle random-phase approximation (QRPA). In the aforementioned approach decompositions of M{sup 2{nu}} and M{sup 0{nu}} can be obtained in terms of the corresponding energy-weighted sum rules S. It is shown that in most of the cases almost the whole dependence of M{sup 2{nu}} and M{sup 0{nu}} on the particle-particle (p-p) renormalization parameter g{sub pp} is accounted for by the g{sub pp} dependence of the corresponding sum rules S. General expressions relating S to a realistic residual particle-particle interaction are derived, which show a pronounced sensitivity of S to the singlet-channel interaction in the case of F transitions and to the triplet-channel interaction in the case of GT transitions. Thus, the sensitivity of M{sup 2{nu}} and M{sup 0{nu}} to the SU(4)-symmetry-breaking part of the p-p residual interaction is dictated by the generic structure of the {beta}{beta}-decay amplitudes. Therefore, a choice of this part in a particular calculation needs a special caution. Finally, a better isospin-consistent way of renormalization of a realistic residual p-p interaction to use in QRPA calculations is suggested.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Discovering the desirable alleles contributing to the lignocellulosic biomass traits in saccharum germplasm collections for energy cane improvement

Phenotyping Methods: The accessions (which includes 21 taxa and 1,177 accessions) in the World Collection of Sugarcane and Related Grasses (WCSRG) was evaluated for the following traits: arenchyma, internode length and diameter, pubescence, pith, Brix, stalk number and fiber. A core of 300 accessions that included each species in the World Collection was selected by using the Maximization Strategy in MStrat software. Results: The core had a higher diversity rating than random selections of 300 accessions. The Shannon–Weaver Diversity Index scores of the core and whole collection were similar indicating that the majority of the diversity was captured by the core collection. The ranges and medians between the core and WCSRG were similar; only two of the trait medians were not significant at P = 0.05 using the non-parametric Wilcoxon method and the coincidence rate (CR % = 96.2) was high (>80) indicating that extreme values were retained. Thus, the phenotypic diversity of these traits in the WCSRG was well represented by the core collection. Associations Methods: Genotypic and phenotypic data were collected for 1002 accessions of the WCSRG including 209 SSR markers. Association analysis was performed using both General Linear (GLM) and Maximum Likelihood (MLM) models. Different core collections with 300 accessions each were selected based on genotypic, phenotypic and combined data based on the Maximization Strategy in MStrat software. Results: A major portion of the genotyping involving SNPs is being conducted by Dr. Jianping Wang of the University of Florida under the DOE award DE-FG 02-11ER 65214 and the genotypic and phenotypic associations will be reported separately next year. In the current, study forty one and seventeen markers were found to be associated with traits using the GLM and MLM methods respectively including associations with arenchyma, internode length and diameter, pubescence, pith, and Sugar Cane Yellow Leaf Virus. The data indicates that each of the cores and the World Collection are similar to each other genotypically and phenotypically, but the core that was selected using only genotypic data was significantly different phenotypically. This indicates that there is not enough association between the genotypic and phenotypic diversity as to select using only genotypic diversity and get the full phenotypic diversity. Core Collection: Creation and Phenotyping Methods: To evaluate this germplasm for breeding purposes, a representative diversity panel selected from the WCSRG of approximately 300 accessions was planted at Canal Point, FL in three replications. These accessions were measured for stalk height and stalk number multiple times throughout the growing season and Brix and fresh biomass during harvest in 2013 and, stalk height, stalk number, stalk diameter, internode length, Brix and fresh and dry biomass was determined in the ratoon crop harvest in 2014. Results: In correlations of multiple measurements, there were higher correlations for early measurements of stalk number and stalk height with harvest traits like Brix and fresh weight. Hybrids had higher fresh mass and Brix while Saccharum spontaneum had higher stalk number and dry mass. The heritability of hybrid mass traits was lower in the ratoon crop. According to the principal component analysis, the diversity panel was divided into two groups. One group had accessions with high stalk number and high dry biomass like S. spontaneum and the other groups contained accessions with higher Brix and fresh biomass like S. officinarum. Mass traits correlated with each other as expected but hybrids had lower correlations between fresh and dry mass. Stalk number and the mass traits correlated with each other except in S. spontaneum and hybrids in the first ratoon. There were 110 accessions not significantly different in Brix from the commercial sugarcane checks including 10 S. spontaneum accessions. There were 27 dry and 6 fresh mass accessions significantly higher than the commercial sugarcane checks. Core Collection: Fiber analysis Methods: A biomass sample was taken from each accession then shredded and dried. Fiber analysis was then performed on each sample. The acetyl groups, acid insoluble lignin, acid soluble lignin, arabinan, glucan, holocellulose, total lignin, structural ash, and xylan were quantified on a % fiber basis and nonstructural ash on a % total basis. Results: There were significant, but not large differences between species for holocellulose, lignin, acetyl, acid soluble lignin, nonstructural ash, and glucan. For each trait, S. spontaneum had significantly more holocellulose, glucan, lignin, and nonstructural ash and less acetyl and acid soluble lignin than the other species. In all populations, glucan and was positively correlated with holocellulose were positively correlated and glucan and and holocellulose were negatively correlated with lignin. In hybrids, internode length correlated positively with holocellulose and nonstructural ash and negatively with lignin. The heritability estimates for each of the fiber component traits is low indicating that environment is an important factor in fiber composition. Principal component analysis indicated that a large amount of diversity exists within each of the species.

09 BIOMASS FUELS↗

Application of the Principle of Maximum Conformality to Top-Pair Production

A major contribution to the uncertainty of finite-order perturbative QCD predictions is the perceived ambiguity in setting the renormalization scale {mu}{sub r}. For example, by using the conventional way of setting {mu}{sub r} {element_of} [m{sub t}/2, 2m{sub t}], one obtains the total t{bar t} production cross-section {sigma}{sub t{bar t}} with the uncertainty {Delta}{sigma}{sub t{bar t}}/{sigma}{sub t{bar t}} {approx} (+3%/-4%) at the Tevatron and LHC even for the present NNLO level. The Principle of Maximum Conformality (PMC) eliminates the renormalization scale ambiguity in precision tests of Abelian QED and non-Abelian QCD theories. By using the PMC, all nonconformal {l_brace}{beta}{sub i}{r_brace}-terms in the perturbative expansion series are summed into the running coupling constant, and the resulting scale-fixed predictions are independent of the renormalization scheme. The correct scale-displacement between the arguments of different renormalization schemes is automatically set, and the number of active flavors n{sub f} in the {l_brace}{beta}{sub i}{r_brace}-function is correctly determined. The PMC is consistent with the renormalization group property that a physical result is independent of the renormalization scheme and the choice of the initial renormalization scale {mu}{sub r}{sup init}. The PMC scale {mu}{sub r}{sup PMC} is unambiguous at finite order. Any residual dependence on {mu}{sub r}{sup init} for a finite-order calculation will be highly suppressed since the unknown higher-order {l_brace}{beta}{sub i}{r_brace}-terms will be absorbed into the PMC scales higher-order perturbative terms. We find that such renormalization group invariance can be satisfied to high accuracy for {sigma}{sub t{bar t}} at the NNLO level. In this paper we apply PMC scale-setting to predict the t{bar t} cross-section {sigma}{sub t{bar t}} at the Tevatron and LHC colliders. It is found that {sigma}{sub t{bar t}} remains almost unchanged by varying {mu}{sub r}{sup init} within the region of [m{sub t}/4, 4m{sub t}]. The convergence of the expansion series is greatly improved. For the (q{bar q})-channel, which is dominant at the Tevatron, its NLO PMC scale is much smaller than the top-quark mass in the small x-region, and thus its NLO cross-section is increased by about a factor of two. In the case of the (gg)-channel, which is dominant at the LHC, its NLO PMC scale slightly increases with the subprocess collision energy {radical}s, but it is still smaller than m{sub t} for {radical} {approx}< 1 TeV, and the resulting NLO cross-section is increased by {approx}20%. As a result, a larger {sigma}{sub t{bar t}} is obtained in comparison to the conventional scale-setting method, which agrees well with the present Tevatron and LHC data. More explicitly, by setting m{sub t} = 172.9 {+-} 1.1 GeV, we predict {sigma}{sub Tevatron, 1.96 TeV} = 7.626{sub -0.257}{sup +0.265} pb, {sigma}{sub LHC, 7 TeV} = 171.8{sub -5.6}{sup +5.8} pb and {sigma}{sub LHC, 14 TeV} = 941.3{sub -26.5}{sup +28.4} pb.

43 PARTICLE ACCELERATORS↗

The Elusive “Life” of LEDs: How TM-21 Contributes to the Solution

This magazine article discusses the issue of LED 'lifetime' and explains where TM-21 plays as part of the solution to this issue. In August 2011, the Illuminating Engineering Society (IES) published the TM-21 document entitled 'Lumen degradation lifetime estimation method for LED light sources.' TM-21 is the IES-recommended method for projecting lumen degradation of an LED package, array or module based on data collected according to LM-80. The lighting community expects TM-21 to become the standard method for projecting useful LED lighting product life at realistic operating temperature. This article presents the development process behind TM-21, and clarifies how and when to apply the lifetime extrapolation method to arrive at reasonable and useful estimations. Why TM-21 and why now? We are all familiar with the very real but sometimes exaggerated long-life attributes of LED technology. Not the least of these is the potential for very long life that helps make it an attractive design choice. The trick has been and continues to be how to measure or estimate this longevity to provide assurance to users of this technology's reliability (life) compared to other options. We also understand that the overall reliability of a complete LED lighting fixture can be affected by the reliability of individual product components (driver, lens, etc.) and should be accounted for in lifetime estimations. The useful life of standard lighting technologies is defined as the time to filament or cathode failure. For most of these lamps, the time period prior to failure exhibits acceptable levels of light output, as shown with the solid lines in Fig. 1. This makes it easy to determine when to replace the lamp. However, LEDs do not have filament burn-out that conveniently announces the end of life (dashed line in Fig. 1). Further, the rapid development of the technology and the desire to bring products to market in a timely manner does not allow for actual testing verification of the long lives claimed (100,000 or even 35,000 hours). As a result, the industry has come to accept a definition of the end of the useful life of an LED as the point when it no longer provides a specified level of light output. And finally, the life and performance of LED lighting products depends greatly on excess heat retained at the diode. This is why LEDs require testing at multiple temperatures such that when a source is installed in a luminaire, its actual operating temperature can be measured and lumen depreciation of the product can be derived. Therefore, to serve the solid-state lighting industry, the Technical Procedures Committee (TPC) of the IES proceeded to develop appropriate tests for use in rating LED product longevity. The initial need was a measure of the basic lumen degradation of LED source components identified by a module, package, or array of diodes and this came in the form of LM-80. Importantly, LM-80 only specifies how to measure lumen depreciation to a minimum of 6000 hours (but recommends testing to 10,000 hours or longer). LM-80 stops short of using that data to estimate any depreciation after that, which is where TM-21 comes in. The TM-21 working group (WG) as part of the IES TPC was formed to develop the lumen depreciation projection method and spent over three years exploring many options. The WG evaluated various projection options starting with an analysis of various mathematical, engineering-based models to provide effective depreciation fit and a useful projection method. Next, the WG analyzed LED lumen maintenance behavior using over 40 sets of LM-80-08 test data (20 sets with 10,000 hours or more) collected from four major LED manufacturers. The working group also examined the accuracy of proposed projections using various proposed models and LM-80 data that extended up to 15,000 hours.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Organic phosphorus in the terrestrial environment: a perspective on the state of the art and future priorities

Here, the dynamics of phosphorus (P) in the environment is important for regulating nutrient cycles in natural and managed ecosystems and an integral part in assessing biological resilience against environmental change. Organic P (P o ) compounds play key roles in biological and ecosystems function in the terrestrial environment being critical to cell function, growth and reproduction. We asked a group of experts to consider the global issues associated with P o in the terrestrial environment, methodological strengths and weaknesses, benefits to be gained from understanding the P o cycle, and to set priorities for P o research. In conclusion, we identified seven key opportunities for P o research including: the need for integrated, quality controlled and functionally based methodologies; assessment of stoichiometry with other elements in organic matter; understanding the dynamics of P o in natural and managed systems; the role of microorganisms in controlling P o cycles; the implications of nanoparticles in the environment and the need for better modelling and communication of the research. Each priority is discussed and a statement of intent for the P o research community is made that highlights there are key contributions to be made toward understanding biogeochemical cycles, dynamics and function of natural ecosystems and the management of agricultural systems.

54 ENVIRONMENTAL SCIENCES↗

The Uranium-Containing and Thorium-Containing Anions Studied by Photoelectron Spectroscopy

An in-depth knowledge of actinide chemistry is fundamental to many aspects of nuclear science and technology, including the synthesis and processing of materials and the remediation of waste disposal sites. Among the actinides, the chemical bonding behaviors of actinium and thorium resemble those of the transition metals; the 5f-electrons of protactinium, uranium, neptunium, and plutonium often play important roles in their bonding; and among the still heavier elements, their bonding tends to mimic the lanthanide elements in terms of electron shielding and their f-electron contributions. Bonding that involves 5f-electrons, however, is especially important, in part because of the significance of uranium and plutonium, but also because these elements are among the few where f-electron participation in bonding is relatively common. This work focused on studying uranium-containing and thorium-containing anions in the gas phase using negative ion photoelectron spectroscopy. Since this technique directly probed valence electrons, it was uniquely positioned to address open questions regarding molecular bonding and electron configurations. A particularly important issue concerned how bonding in actinide-containing molecules was affected by modifications to their actinide atoms’ environment, i.e., due to their interaction with ligands. A closely related question was how actinide atoms’ suborbitals were qualitatively reordered and their energies quantitatively shifted as a result of their ligated environments. These were especially relevant issues in regard to uranium due to it having multiple possible oxidation states (OS) and the potential for 5f electron participation in bonding. The effects of ligands on oxidation states and 5f-orbital energies in uranium bonding was expected to be pronounced. Both ligands and excess electrons were seen as probes of actinide atoms within actinide-containing molecules. Our strategy for advancing knowledge of chemical bonding in the actinide-containing species utilized the synergy between experiments and theory, where in some cases experimental results validated theory and where in others computational results assisted in interpreting experiments. Calculations on actinide systems are terrifically challenging due to large spin-orbit interactions, relativistic effects, and just the sheer number of electrons involved. Even in the simplest species, e.g., U and U2, the most sophisticated, modern calculations carried out by the most experienced theorists often only approximate experimentally-measured values, such as electron affinities. For theory to provide confident predictions that can be used to solve real problems it needed an iterative and ultimately corrective mechanism by which its methods can develop further. Experiments can be used to identify when theory has failed; whereupon the subsequent process of using the experiment-theory interplay can be used to find the cause of the failure. Upon fixing it in one case, different test species can be proposed and studied by the experiment-theory combination to determine whether the problem has been corrected. Thus, experiments not only measure the values of molecular properties, they also provide navigational 3 beacons that keep computations off the reefs in an otherwise dark sea with few reference points. Experimental measurements in the actinide field are not only important, they are in actuality essential to computational progress. While it was not always possible to compare the theoreticallydetermined quantity of interest directly with the same experimentally-measured observable, it was usually possible to compare consequential properties that are both calculable and measurable. In the work completed here electron affinities and electronic state spacings were often sensitive consequential parameters. Reasonable agreement between measured and computational values signaled that a calculation that was very likely to be on-track. We had established collaborative relationships with five computational groups, all of which have expertise in computational actinide chemistry. Their PI’s are L. Cheng, D. Dixon, L. Gagliardi, K. Peterson, and B. Vlaisavljevich. Our close interaction with our theory partners led to us suggesting systems to them and them to us. This reciprocal interaction between our experimental and their computational results was among the most important strengths of this work and was a thread woven throughout. Even though anion photoelectron spectroscopic studies are conducted on anions, much of the information that they provide, pertains to the electronic structure of the neutral counterparts of those anions; among these are electron affinities and electronically excited state spacings. Our experimental tools included several specialized ion sources for forming the anionic species of interest, a mass spectrometer for identifying and mass-selecting them, and an anion photoelectron spectrometer for determining their electron affinities (EA) and characterizing the electronic states of the selected anions’ neutral counterparts. Anion photoelectron spectroscopy is conducted by crossing a mass-selected beam of anions with a fixed-frequency laser beam and energy-analyzing the resultant photodetached electrons. The photodetachment process is governed by the energyconserving relationship: hν = EBE + EKE, where hν is the photon’s energy, EBE is the electron binding (photodetachment transition) energy, and EKE is the electron’s kinetic energy. In our apparatus mass-selection is accomplished via time-of-flight mass spectrometry (TOF-MS), electron energy analysis is achieved with either a magnetic bottle or by velocity mapped imaging. Photodetachment of electrons from anions is implemented via either Nd:YAG or excimer lasers. The photodetachment transition energy, i.e., the EBE, between the ground vibrational and electronic state of an anion and the ground vibrational and electronic state of that anion’s neutral counterpart is the adiabatic electron affinity (EA) of that neutral molecule. Likewise, photodetachment transitions between the ground vibrational and electronic state of an anion and the various electronically-excited states of that anion’s corresponding neutral map the electronic spectrum of that neutral species, i.e., the spectral spacings in the photoelectron spectrum are a mirror image of the neutral’s electronic spectrum. It was, of course, crucial to be able to form the anionic species of interest. There, we had a particularly broad field of anion sources from which to choose. These included several variants of pulsed laser vaporization (LV), laser photoemission, infrared desorption plus photoemission, pulsed arc discharge (PACIS), electrospray ionization (ESI), and Rydberg electron transfer (RET). Each of these anion sources were readily combined with, i.e., connected to, the anion photoelectron spectroscopic portion of our apparatus as described above. Among the sources that utilize lasers, visible light for LV sources as well as IR for desorption sources are provided by Nd:YAG lasers. Ultraviolet photons are provided by both Nd:YAG and excimer lasers, whereas the excitation wavelengths for RET experiments come from two Nd:YAG-pumped dye lasers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗