Search NASA⌕ Search

SEARCH · Search NASA

Results for “LINEAR PROGRAMMING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Beam Phase Space Tomography at Fast Electron Linac at Fermilab

FAST linear accelerator has been commissioned in 2017. Experimental program of the facility requires high quality beams with well-defined properties. Solenoidal fields at photoinjector, laser spot shape, space charge forces and other effects can distort beam distribution and introduce coupling. This work presents results of a beam phase space tomography for a coupled 4D case. Beam was rotated in two planes with seven quads by 180 degrees and images from YaG screen were used to perform SVD based reconstruction of the beam distribution.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Transient Efficiency Flexibility and Reliability Optimization of Coal-Fired Power Plants: Model-Predictive Control Library Development (Report)

This document pertains to the reporting requirements of DOE contract FE-0031767. The document covers the development of a model predictive control (MPC) library for implementing MPC for a general dynamic system. The library is implemented in a standardized manner in Matlab/Simulink, where core functions on model prediction, linearization and formulation and solution of a quadratic programming (QP) optimization problem is done in the core library - independent of the specific application. The user can provide the application-specific dynamic model in continuous and discrete time, to rapidly implement and test the MPC performance in a desktop simulation. The MPC optimization objective and constraints are also easily configured via an Excel file to allow iterative refinement as needed. Finally, the MPC library enables a rapid deployment to a target environment through auto C-code generation and containerization. The MPC library works seamlessly with the model based estimation (MBE) library to obtain the overall output feedback control solution. In this program, the reduced order model (ROM) of a coal-fired power plant (CFPP) is used to implement and test the MPC solution.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2019

Co-Optimized Analysis and Design of Electric and Natural Gas Infrastructures

This paper proposes and implements a long-term deterministic capacity expansion model for the co-optimization of electric and natural gas infrastructures. It determines the required investments in generation units, transmission lines and pipelines for meeting future demands, while representing electricity and natural gas flows using DC Power Flow and Weymouth equations, respectively. A Mixed Integer Nonlinear Programming (MINLP) problem is developed, from which a linearized version is derived. A 26 node integrated gas-electric system for the Eastern Region of the United States is used to demonstrate the model’s capabilities. Results show that the model provides an accurate operational representation of the integrated system, and, therefore, enhances the expansion planning process.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

VeloxChem: A Python-driven density-functional theory program for spectroscopy simulations in high-performance computing environments

An open-source program named VeloxChem has been developed for the calculation of electronic real and complex linear response functions at the levels of Hartree–Fock and Kohn–Sham density functional theories. With an object-oriented program structure written in a Python/C++ layered fashion, VeloxChem enables time-efficient prototyping of novel scientific approaches without sacrificing computational efficiency, so that molecular systems involving up to and beyond 500 second-row atoms (or some 10,000 contracted and in part diffuse Gaussian basis functions) can be routinely addressed. In addition, VeloxChem is equipped with a polarizable embedding scheme for the treatment of the classical electrostatic interactions with an environment that in turn is modeled by atomic site charges and polarizabilities. The underlying hybrid message passing interface (MPI)/open multiprocessing (OpenMP) parallelization scheme makes VeloxChem suitable for execution in high-performance computing cluster environments, showing even slightly beyond linear scaling for the Fock matrix construction with use of up to 16,384 central processing unit (CPU) cores. An efficient—with respect to convergence rate and overall computational cost—multifrequency/gradient complex linear response equation solver enables calculations not only of conventional spectra, such as visible/ultraviolet/X-ray electronic absorption and circular dichroism spectra, but also time-resolved linear response signals as due to ultra-short weak laser pulses.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Probing the Tri-Linear Higgs Self-Coupling

This poster explores my activities during the 2019 CCI program at Fermi National Accelerator Laboratory (Fermilab) and how they contribute to one of the ongoing projects being worked on by many employees and physicists at the LPC (LHC Physics Center). This project uses CMS (Compact Muon Solenoid) simulation samples to study the feasibility of probing tri-linear Higgs-self coupling in a process where a single Higgs is produced in vector boson scattering associated with two additional protons, i.e. , where the W bosons decay leptonically and the Higgs decays to bb. The leptons are required to have the same charge in order to suppress other standard model backgrounds. Any deviations of the Higgs-self coupling from the value predicted by the Standard Model (SM) could be indications of Beyond the Standard Model (BSM) physics. These indications would come from the observed value of an anomalous coupling, and its effects on SM values.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

ORNL Neutron Cross-Section Measurements in the Resolved Resonance Range for the NCSP

Nuclear criticality simulations test the quality and the consistency of the existing nuclear evaluated data libraries such as ENDF/B, JEFF, or JENDL. In some cases, the cross-section evaluations of those libraries are found insufficient to describe accurately criticality benchmarks. The US Nuclear Criticality Safety Program (NCSP) collaborates with the Joint Research Center (JRC) in Geel, Belgium, to perform high-resolution neutron-induced cross section measurements at the Geel Linear Accelerator (GELINA) to resolve deficiencies in nuclear data that have been emerging in criticality calculations. Problems with nuclear data include insufficient neutron energy range, missing covariances, and problems with previous experiments. For example, the use of the ENDF/B-VII.1 neutron cross section data for vanadium, cerium and zirconium in nuclear criticality safety calculations shows discrepancies between benchmark calculations measurements and demonstrates the need for reliable covariance data. For new covariances of existing data, a reevaluation of the old cross section data is needed. However, these data are in many cases no longer available. This deficit can be overcome only by obtaining new experimental data to serve as the basis of a new evaluation. Recent measurements were made of the neutron total and capture cross sections of natural vanadium and natural zirconium in the neutron energy range from 100 eV to several hundred keV. These measured data will be used to improve representation of the cross sections since most of the available evaluated data rely on old measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

The new Batch Mode Ion Source for stand-alone operation at the Facility for Rare Isotope Beams (FRIB)

Gas stoppers have been used for a long-standing successful science program at Michigan State University with stopped and rare-isotope beams produced by projectile fragmentation. The National Superconducting Cyclotron Laboratory’s Coupled Cyclotron Facility has recently transitioned into the Facility for Rare Isotope Beams (FRIB) laboratory to provide rare isotopes using a high-power superconducting linear accelerator and new production facilities. To allow the science program with stopped and reaccelerated beams to continue during the transition period, a stand-alone capability was added. The Batch Mode Ion Source (BMIS) was built and has been providing beams of long-lived and stable isotopes of a variety of elements for successful user experiments. Finally, the BMIS system is described and results from the production of various beams are presented.

47 OTHER INSTRUMENTATION↗
DOE OSTI2016

Linear sine wave profiling to machine instability targets

Specialized machining processes and programming have been developed to deliver thin tin and copper Richtmyer-Meshkov instability targets that have different amplitude perturbations across the face of one 4-in.-diameter target. Typical targets have anywhere from two to five different regions of sine waves that have different amplitudes varying from 4 to 200 μm across the face of the target. The puck is composed of multiple rings that are zero press fit together and diamond turned to create a flat platform with a tolerance of 2 μm for the shock experiment. A custom software program was written in Labview to write the point-to-point program for the diamond-turning profiler through the X-Y-Z movements to cut the pure planar straight sine wave geometry. As a result, the software is optimized to push the profile of the whole part into the face while eliminating any unneeded passes that do not cut any material.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2015

SU-E-T-136: Assessment of Seasonal Linear Accelerator Output Variations and Associated Impacts

Purpose: Application of process control theory in quality assurance programs promises to allow earlier identification of problems and potentially better quality in delivery than traditional paradigms based primarily on tolerances and action levels. The purpose of this project was to characterize underlying seasonal variations in linear accelerator output that can be used to improve performance or trigger preemptive maintenance. Methods: Review of runtime plots of daily (6 MV) output data acquired using in house ion chamber based devices over three years and for fifteen linear accelerators of varying make and model were evaluated. Shifts in output due to known interventions with the machines were subtracted from the data to model an uncorrected scenario for each linear accelerator. Observable linear trends were also removed from the data prior to evaluation of periodic variations. Results: Runtime plots of output revealed sinusoidal, seasonal variations that were consistent across all units, irrespective of manufacturer, model or age of machine. The average amplitude of the variation was on the order of 1%. Peak and minimum variations were found to correspond to early April and September, respectively. Approximately 48% of output adjustments made over the period examined were potentially avoidable if baseline levels had corresponded to the mean output, rather than to points near a peak or valley. Linear trends were observed for three of the fifteen units, with annual increases in output ranging from 2–3%. Conclusion: Characterization of cyclical seasonal trends allows for better separation of potentially innate accelerator behaviour from other behaviours (e.g. linear trends) that may be better described as true out of control states (i.e. non-stochastic deviations from otherwise expected behavior) and could indicate service requirements. Results also pointed to an optimal setpoint for accelerators such that output of machines is maintained within set tolerances and interventions are required less frequently.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2015

Automating linear accelerator quality assurance

Purpose: The purpose of this study was 2-fold. One purpose was to develop an automated, streamlined quality assurance (QA) program for use by multiple centers. The second purpose was to evaluate machine performance over time for multiple centers using linear accelerator (Linac) log files and electronic portal images. The authors sought to evaluate variations in Linac performance to establish as a reference for other centers. Methods: The authors developed analytical software tools for a QA program using both log files and electronic portal imaging device (EPID) measurements. The first tool is a general analysis tool which can read and visually represent data in the log file. This tool, which can be used to automatically analyze patient treatment or QA log files, examines the files for Linac deviations which exceed thresholds. The second set of tools consists of a test suite of QA fields, a standard phantom, and software to collect information from the log files on deviations from the expected values. The test suite was designed to focus on the mechanical tests of the Linac to include jaw, MLC, and collimator positions during static, IMRT, and volumetric modulated arc therapy delivery. A consortium of eight institutions delivered the test suite at monthly or weekly intervals on each Linac using a standard phantom. The behavior of various components was analyzed for eight TrueBeam Linacs. Results: For the EPID and trajectory log file analysis, all observed deviations which exceeded established thresholds for Linac behavior resulted in a beam hold off. In the absence of an interlock-triggering event, the maximum observed log file deviations between the expected and actual component positions (such as MLC leaves) varied from less than 1% to 26% of published tolerance thresholds. The maximum and standard deviations of the variations due to gantry sag, collimator angle, jaw position, and MLC positions are presented. Gantry sag among Linacs was 0.336 ± 0.072 mm. The standard deviation in MLC position, as determined by EPID measurements, across the consortium was 0.33 mm for IMRT fields. With respect to the log files, the deviations between expected and actual positions for parameters were small (<0.12 mm) for all Linacs. Considering both log files and EPID measurements, all parameters were well within published tolerance values. Variations in collimator angle, MLC position, and gantry sag were also evaluated for all Linacs. Conclusions: The performance of the TrueBeam Linac model was shown to be consistent based on automated analysis of trajectory log files and EPID images acquired during delivery of a standardized test suite. The results can be compared directly to tolerance thresholds. In addition, sharing of results from standard tests across institutions can facilitate the identification of QA process and Linac changes. These reference values are presented along with the standard deviation for common tests so that the test suite can be used by other centers to evaluate their Linac performance against those in this consortium.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Multilayer Divide-Expand-Consolidate Coupled-Cluster Method: Demonstrative Calculations of the Adsorption Energy of Carbon Dioxide in the Mg-MOF-74 Metal–Organic Framework

The implementation and evaluation of a multilayer extension of the divide-expand-consolidate (DEC) scheme within the LSDalton program is presented. The DEC scheme is a linear-scaling, fragmentation-based local coupled-cluster (CC) method that provides a means of overcoming the scaling wall associated with canonical CC electronic structure calculations on large molecular systems. Taking advantage of the local nature of correlation effects, the correlation energy for the full molecule is calculated from a set of independent fragments using localized molecular orbitals. However, when only a small subsystem of a larger system is of interest, for example, adsorption sites or catalytically active sites, the majority of the computational time may be spent evaluating the correlation energy of fragments which have little effect on the properties in the area of interest (AOI). The multilayer DEC (ML-DEC) scheme addresses this by taking advantage of the independent nature of the fragments in order to evaluate the correlation energy of various regions of the system at different levels of theory. Regions far from the AOI are evaluated at lower (cheaper) levels of theory such as Hartree–Fock (HF) or Møller–Plesset second-order perturbation theory (MP2), while the area immediately surrounding the AOI is treated with a higher level CC model. Through the ML-DEC scheme, the computational cost of CC calculations on these types of systems can be significantly reduced while maintaining the accuracy of higher-level calculations. Results from HF/RI-MP2 and RI-MP2/CCSD ML-DEC calculations of the binding energy of a fatty acid dimer are presented. We find that the ML-DEC scheme is capable of reproducing DEC energy differences at a target level of theory, provided that the region treated at the target level of theory is chosen to be sufficiently large. Time-to-solution is found to be significantly reduced, particularly in the RI-MP2/CCSD calculations. Finally, the ML-DEC scheme is applied to the calculation of CO 2 adsorption in a Mg-MOF-74 channel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Measurement of spin density matrix elements in Λ ( 1520 ) photoproduction at 8.2–8.8 GeV

We report on the measurement of spin density matrix elements of the $\Lambda(1520)$ in the photoproduction reaction $\gamma p\rightarrow \Lambda(1520)K^+$, via its subsequent decay to $K^{-}p$. The measurement was performed as part of the GlueX experimental program in Hall D at Jefferson Lab using a linearly polarized photon beam with $E_\gamma =$ 8.2-8.8 GeV. These are the first such measurements in this photon energy range. Results are presented in bins of momentum transfer squared, $-(t-t_\text{0})$. We compare the results with a Reggeon exchange model and determine that natural exchange amplitudes are dominant in $\Lambda(1520)$ photoproduction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Test Results of a High-Gradient 2.856-GHz Negative Harmonic Accelerating Waveguide

We report the high-gradient tests results of a novel traveling wave accelerating structure for β=0.3 based on a novel approach of operating at the first negative spatial harmonic. Accelerating gradients of 50 MV/m and peak electric fields of 160 MV/m were achieved in a single structure consisting of 15 coupled cells during tests at the advanced photon source. This work was performed by RadiaBeam, in collaboration with the Argonne National Laboratory, as a part of a Research and Development Program for the development of an ultrahigh-gradient linear accelerator, the Advanced Compact Carbon Ion Linac, for hadron therapy.

42 ENGINEERING↗
DOE OSTI2020

Investigating the Impact of Power-Take-Off System Parameters and Control Law on a Rotational Wave Energy Converter’s Peak-to-Average Power Ratio Reduction

Due to the irregular nature of real waves, the power captured in a wave energy converter (WEC) system is highly variable. This is an important barrier to the effective use of WECs. To address this challenge, this study focuses on a rotational WEC power-take-off system in which high-speed and high-efficiency generators along with a torque/power smoothing inertia element can be effectively utilized. In the first phase of this study, the U.S. Department of Energy’s reference model 3 (WEC-Sim RM3; two-body point absorber), along with a slider-crank WEC, were integrated for linear to rotational conversion. Relative motion between the float and spar in RM3 was the driving force for this slider-crank WEC, which is connected to a motor/generator set through a gearbox. RM3 geometry was scaled down by 25 times to work within the limits of the physical motor/generator set used in the experimentation. Once the integration in a hardware-in-the-loop simulation environment was successfully completed, data on the peak-to-average power ratio was collected for various wave conditions including regular and irregular waves. The control algorithm designed to keep the system in resonance with waves was able to maintain relatively high speed depending on the specific gear ratio and wave period. Initial results with hardware-in-the-loop simulations reveal that gear ratio and crank radius have a strong impact on the peak-to-average power ratio. In addition, it was found that output power from the generator was maximized at a larger gear ratio, as the crank radius was increased.

50 EE - Wind and Water Power Program - Water (EE-4↗
DOE OSTI2021

EKAT v.1.0

E3SM Kokkos Application Toolkit (EKAT) is a collection of C++, Fortran, and CMake utilities for providing a single implementation of common kernels based on the Kokkos programming model. The library contains utilities for vectorization, tridiagonal linear system solvers, and linear interpolation as well as some general-purpose utilities such as testing utilities, parameter lists, representation of physical units, and additional interfaces. The goal is to provide a centralized implementation for high-performance computing structures and common utilities that reduce code duplication and streamline maintenance efforts. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525. SAND2022-1327 O

Bertagna, Luca↗
DOE OSTI2017

ECP Milestone Report: Identify initial kernels, bake-off problems (benchmarks) and miniapps (CEED-MS6)

The CEED co-design center is developing a number of kernels, bake-off / benchmark problems (BPs) and mini-applications (miniapps) that capture the unique requirements of high-order finite element algorithms and use them to influence standards, best practices and vendors to generate more portable, better performing code across diverse hardware designs. This is a main activity in CEED’s Hardware, Applications and Finite Element thrusts. CEED’s miniapps, a.k.a. CEEDlings, are small, standalone applications - surrogates for sub-components of interest from the selected first wave of applications (the MARBL/LLNLApp and ExaSMR projects). The BPs are even smaller standalone programs that solve a simple physical problem, including discretization, linear and/or nonlinear solve, and potentially a relatively small number of time steps. A BP may be a proxy/surrogate for part of a miniapp or another problem of general interest. In CEED, both miniapps and BPs will be used extensively in the project to evaluate and compare the performance of algorithms in specific contexts. The parts of the miniapps and BPs that play an important role in their overall performance will be identified and separated as standalone kernels. These kernels and their interaction inside BPs, miniapps and the actual applications, will be the main focus of our optimization efforts. All three standalone pieces of software (miniapps, BPs, and kernels) will serve as a basis for engaging and collaborating with hardware vendors and software technologies (ST) projects. These partners can start at the bottom of the hierarchy, e.g. with the kernels, and easily transition to BPs and miniapps as all three families will be produced in the same CEED environment. In this milestone we identified the initial kernels, bake-off problems and miniapps and delivered software and documentation for them through the new CEED website, http://ceed.exascaleproject.org. We specifically identified the Nekbone miniapp for the ExaSMR application and developed a new miniapp, Laghos, for the MARBL/LLNLApp application. We also formulated four initial benchmark problems (BP1- BP4) with clearly defined performance metrics and performed an initial bake-off comparison between the Nek5000 (spectral element) and MFEM (high-order finite element) technologies. As part of the milestone, we also engaged vendors (AMD) and ST projects (MPICH, STRUMPACK). In this document we are reporting some details and results from these R&D activities, as well as additional project-wide activities performed in Q3 of FY17, including: making CEED software available on GitHub, developing the project website, and the preparation of CEED’s first annual meeting.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Managing time-substitutable electricity usage using dynamic controls

A predictive-control approach allows an electricity provider to monitor and proactively manage peak and off-peak residential intra-day electricity usage in an emerging smart energy grid using time-dependent dynamic pricing incentives. The daily load is modeled as time-shifted, but cost-differentiated and substitutable, copies of the continuously-consumed electricity resource, and a consumer-choice prediction model is constructed to forecast the corresponding intra-day shares of total daily load according to this model. This is embedded within an optimization framework for managing the daily electricity usage. A series of transformations are employed, including the reformulation-linearization technique (RLT) to obtain a Mixed-Integer Programming (MIP) model representation of the resulting nonlinear optimization problem. In addition, various regulatory and pricing constraints are incorporated in conjunction with the specified profit and capacity utilization objectives.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2017

Managing time-substitutable electricity usage using dynamic controls

A predictive-control approach allows an electricity provider to monitor and proactively manage peak and off-peak residential intra-day electricity usage in an emerging smart energy grid using time-dependent dynamic pricing incentives. The daily load is modeled as time-shifted, but cost-differentiated and substitutable, copies of the continuously-consumed electricity resource, and a consumer-choice prediction model is constructed to forecast the corresponding intra-day shares of total daily load according to this model. This is embedded within an optimization framework for managing the daily electricity usage. A series of transformations are employed, including the reformulation-linearization technique (RLT) to obtain a Mixed-Integer Programming (MIP) model representation of the resulting nonlinear optimization problem. In addition, various regulatory and pricing constraints are incorporated in conjunction with the specified profit and capacity utilization objectives.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗