Search NASA⌕ Search

SEARCH · Search NASA

Results for “LOADS - PLATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Silver-Loaded Xerogel Nanostructures for Iodine Capture: A Comparison of Thiolated versus Unthiolated Sorbents

Here this paper describes the development and provides comparisons of thiolated (-SH) and unthiolated Ag-Al-Si-O xerogels for iodine gas capture. These xerogels were produced from alkoxides and then heat-treated at 350 °C to provide mechanical strength for subsequent processing steps. Then, a portion of the xerogels was thiolated using (3-mercaptopropyl)trimethoxysilane. Next, thiolated and unthiolated batches were ion-exchanged in AgNO 3 solutions where Ag + replaced Na + in the gel network on a near 1:1 molar basis. Subsamples of the Ag-exchanged xerogels were subjected to a reduction step in H 2 /Ar to convert Ag + to Ag 0 where the rest of the Ag-exchanged (Ag + ) were not reduced. X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy revealed nanoscale Ag 0 in the Ag + samples despite no active reduction where actively reduced samples had bimodal Ag 0 distribution of ~2-3 nm hexagonal and ~6-7 nm cubic crystallites. Synchrotron X-ray absorption spectroscopy was used to assess the oxidization states of Ag, S, and I within the different xerogel samples. The specific surface areas of the base xerogels decreased as subsequent treatments were performed on the as-made samples, albeit the decreases were smaller than aerogel equivalents of these samples from a previous study. All iodine-loaded Ag-based samples showed a mixture of β-AgI and γ-AgI. Comparisons of iodine-loading results with other Ag-based iodine sorbents show that the thiolated Ag 0 -xerogels in this work have one of the highest iodine-loading capacities (q e ) reported to date in saturated conditions with the thiolated Ag 0 -xerogel showing 522 mg iodine per g of the sorbent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Bulk vs Intrinsic Activity of NiFeO x Electrocatalysts in the Oxygen Evolution Reaction: The Influence of Catalyst Loading, Morphology, and Support Material

We used a combination of ultrahigh vacuum surface science techniques, X-ray spectroscopy, electrochemistry, and density functional theory (DFT), to characterize the influence of catalyst morphology, loading/coverage, and substrate material on the bulk (all atoms) and intrinsic (electrochemically accessible atoms) activity of NiFeO x electrocatalysts in the oxygen evolution reaction (OER). NiFeO x catalysts were grown on both Au(111) and highly oriented pyrolytic graphite (HOPG) electrodes. DFT predicted Fe edge-site atoms at the NiFeO x /Au(111) interface to be the most thermodynamically favorable reaction center, and X-ray absorption spectroscopy data indicated small NiFeO x catalyst particles on Au(111) contained a high population of OER active Fe edge-site atoms. However, restructuring of the Au(111) surface due to repeated oxidation and reduction cycles of the OER CV measurements encapsulated small NiFeO x nanoparticles at catalyst loadings below ~1.5 nmol metal /cm 2 , passivated catalyst edges and reduced bulk OER activity of Au-supported NiFeO x compared with HOPG-supported ones. Analysis of intrinsic activity revealed that the Au(111) support strongly benefited electrochemically accessible NiFeO x atoms, and we observed a 2–3 fold activity enhancement compared with HOPG-supported catalysts for loadings above ~1 nmol metal /cm 2 . Overall, evaluating bulk vs intrinsic activity and identifying loading/coverage-dependent support effects is important for accurately probing fundamental interfacial chemistry, choosing suitable catalyst loadings and supports, and optimizing system parameters to maximize the performance of electrocatalyst systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Coordinatively and Spatially Coconfining High-Loading Atomic Sb in Sulfur-Rich 2D Carbon Matrix for Fast K + Diffusion and Storage

The atomically dispersed materials promise ultrafast redox kinetics for alkali-ion storage. However, their relatively low mass loading limits their application. In this work, well-dispersed Sb atoms with high-loading of 23.3 wt % anchored in sulfur-rich amorphous carbon-coated reduced graphene oxide matrix (SbSA/C) are prepared by a coordinative and spatial coconfinement methodology including freeze-casting the well-dissolved Sb-chelates (Sb-thioglycolate) within graphene oxide suspension and post heating-treatment. The reduced graphene oxide substrate features open two-dimensional spatial framework for loading atomically dispersive Sb species, and the pyrolyzed Sb-chelates would provide not only massive desirable heteroatoms (S, O) for coordinating the Sb atoms but also in situ pyrolytic carbon for further spatially separating those dispersive atoms. The coordinative and spatial coconfinement engineering also endows the SbSA/C composite with atomic-level Sb atoms against migration and agglomeration during electrochemical K-storage cycling. In situ TEM reveals the uniform potassiation behavior of the SbSA/C without obvious volume change; DFT calculation and electrochemical characterization suggest the significantly lower K-ion diffusion energy barrier. Therefore, on the basis of both the active Sb center and the coordinative heteroatom, the SbSA/C electrode delivers high fast-charging capacity, outstanding rate capability and long-lifespan performance in half/full K-ion batteries (e.g., a stable capacity of 331.3 mA h g –1 is maintained over 1100 cycles at 1.0 A g –1 for half-cell).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Load‐Balancing Intense Physics Calculations to Embed Regionalized High‐Resolution Cloud Resolving Models in the E3SM and CESM Climate Models

Abstract We design a new strategy to load‐balance high‐intensity sub‐grid atmospheric physics calculations restricted to a small fraction of a global climate simulation's domain. We show why the current parallel load balancing infrastructure of Community Earth System Model (CESM) and Energy Exascale Earth Model (E3SM) cannot efficiently handle this scenario at large core counts. As an example, we study an unusual configuration of the E3SM Multiscale Modeling Framework (MMF) that embeds a binary mixture of two separate cloud‐resolving model grid structures that is attractive for low cloud feedback studies. Less than a third of the planet uses high‐resolution (MMF‐HR; sub‐km horizontal grid spacing) relative to standard low‐resolution (MMF‐LR) cloud superparameterization elsewhere. To enable MMF runs with Multi‐Domain cloud resolving models (CRMs), our load balancing theory predicts the most efficient computational scale as a function of the high‐intensity work's relative overhead and its fractional coverage. The scheme successfully maximizes model throughput and minimizes model cost relative to precursor infrastructure, effectively by devoting the vast majority of the processor pool to operate on the few high‐intensity (and rate‐limiting) high‐resolution (HR) grid columns. Two examples prove the concept, showing that minor artifacts can be introduced near the HR/low‐resolution CRM grid transition boundary on idealized aquaplanets, but are minimal in operationally relevant real‐geography settings. As intended, within the high (low) resolution area, our Multi‐Domain CRM simulations exhibit cloud fraction and shortwave reflection convergent to standard baseline tests that use globally homogenous MMF‐LR and MMF‐HR. We suggest this approach can open up a range of creative multi‐resolution climate experiments without requiring unduly large allocations of computational resources.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Global Barotropic Tide Modeling Using Inline Self‐Attraction and Loading in MPAS‐Ocean

Abstract We examine ocean tides in the barotropic version of the Model for Prediction Across Scales (MPAS‐Ocean), the ocean component of the Department of Energy Earth system model. We focus on four factors that affect tidal accuracy: self‐attraction and loading (SAL), model resolution, details of the underlying bathymetry, and parameterized topographic wave drag. The SAL term accounts for the tidal loading of Earth's crust and the self‐gravitation of the ocean and the load‐deformed Earth. A common method for calculating SAL is to decompose mass anomalies into their spherical harmonic constituents. Here, we compare a scalar SAL approximation versus an inline SAL using a fast spherical harmonic transform package. Wave drag accounts for energy lost by breaking internal tides that are produced by barotropic tidal flow over topographic features. We compare a series of successively finer quasi‐uniform resolution meshes (62.9, 31.5, 15.7, and 7.87 km) to a variable resolution (45 to 5 km) configuration. We ran MPAS‐Ocean in a single‐layer barotropic mode forced by five tidal constituents. The 45 to 5 km variable resolution mesh obtained the best total root‐mean‐square error (5.4 cm) for the deep ocean ( 1,000 m) tide compared to TPXO8 and ran twice as fast as the quasi‐uniform 8 km mesh, which had an error of 5.8 cm. This error is comparable to those found in other forward (non‐assimilative) ocean tide models. In future work, we plan to use MPAS‐Ocean to study tidal interactions with other Earth system components, and the tidal response to climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Ultra-thermostable RNA nanoparticles for solubilizing and high-yield loading of paclitaxel for breast cancer therapy

Paclitaxel is widely used in cancer treatments, but poor water-solubility and toxicity raise serious concerns. Here we report an RNA four-way junction nanoparticle with ultra-thermodynamic stability to solubilize and load paclitaxel for targeted cancer therapy. Each RNA nanoparticle covalently loads twenty-four paclitaxel molecules as a prodrug. The RNA-paclitaxel complex is structurally rigid and stable, demonstrated by the sub-nanometer resolution imaging of cryo-EM. Using RNA nanoparticles as carriers increases the water-solubility of paclitaxel by 32,000-fold. Intravenous injections of RNA-paclitaxel nanoparticles with specific cancer-targeting ligand dramatically inhibit breast cancer growth, with nearly undetectable toxicity and immune responses in mice. No fatalities are observed at a paclitaxel dose equal to the reported LD 50 . The use of ultra-thermostable RNA nanoparticles to deliver chemical prodrugs addresses issues with RNA unfolding and nanoparticle dissociation after high-density drug loading. This finding provides a stable nano-platform for chemo-drug delivery as well as an efficient method to solubilize hydrophobic drugs.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Fifth-degree elastic energy for predictive continuum stress–strain relations and elastic instabilities under large strain and complex loading in silicon

Materials under complex loading develop large strains and often phase transformation via an elastic instability, as observed in both simple and complex systems. Here, we represent a material (exemplified for Si I) under large Lagrangian strains within a continuum description by a 5th-order elastic energy found by minimizing error relative to density functional theory (DFT) results. The Cauchy stress—Lagrangian strain curves for arbitrary complex loadings are in excellent correspondence with DFT results, including the elastic instability driving the Si I → II phase transformation (PT) and the shear instabilities. PT conditions for Si I → II under action of cubic axial stresses are linear in Cauchy stresses in agreement with DFT predictions. Such continuum elastic energy permits study of elastic instabilities and orientational dependence leading to different PTs, slip, twinning, or fracture, providing a fundamental basis for continuum physics simulations of crystal behavior under extreme loading.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-performance ionomerless cathode anion-exchange membrane fuel cells with ultra-low-loading Ag–Pd alloy electrocatalysts

Rapid translation of catalysts from fundamental studies to high-performance devices could facilitate the process of developing and commercializing anion-exchange membrane fuel cells (AEMFCs). Traditionally, translation from material screening in three-electrode rotating disk electrode (RDE) cells to AEMFCs is complicated by differences in microenvironments, e.g. solid ionomer/membrane vs liquid electrolyte. Herein, we introduce a platform for translation to devices that utilizes ionomerless ultra-low-loading Ag-Pd alloy electrocatalyst cathodes synthesized by co-physical vapor deposition (PVD). Our ionomerless cathodes allow for systematic H 2 -O 2 AEMFC experiments while demonstrating comparable activity trends to those in three-electrode cells. Furthermore, here we show that our Ag 10 Pd 90 -based AEMFC reaches a peak power density of ~1 W cm$_{geo}^{-2}$ and ~10 W mg$_{PGM Cathode}^{-1}$ satisfying the U.S. Department of Energy’s platinum-group-metal (PGM) loading and cost targets. Our approach shows promise in facilitating the rapid translation between three-electrode studies and AEMFCs, offering a simple and effective design for decreasing PGM loadings.

25 ENERGY STORAGE↗
DOE OSTI2025

Electrochemical loading enhances deuterium fusion rates in a metal target

Nuclear fusion research for energy applications aims to create conditions that release more energy than required to initiate the fusion process1. To generate meaningful amounts of energy, fuels such as deuterium need to be spatially confined to increase the collision probability of particles2, 3–4. We therefore set out to investigate whether electrochemically loading a metal lattice with deuterium fuel could increase the probability of nuclear fusion events. Here we report a benchtop fusion reactor that enabled us to bombard a palladium metal target with deuterium ions. These deuterium ions undergo deuterium–deuterium fusion reactions within the palladium metal. We showed that the in situ electrochemical loading of deuterium into the palladium target resulted in a 15(2)% increase in deuterium–deuterium fusion rates. This experiment shows how the electrochemical loading of a metal target at the electronvolt energy scale can affect nuclear reactions at the megaelectronvolt energy scale.

Chen, Kuo-Yi↗
DOE OSTI2022

Fabrication, thermal analysis, and heavy ion irradiation resistance of epoxy matrix nanocomposites loaded with silane-functionalized ceria nanoparticles

This paper describes a detailed understanding of how nanofillers function as radiation barriers within the polymer matrix, and how their effectiveness is impacted by factors such as composition, size, loading, surface chemistry, and dispersion. Here, we designed a comprehensive investigation of heavy ion irradiation resistance in epoxy matrix composites loaded with surface-modified ceria nanofillers, utilizing tandem computational and experimental methods to elucidate radiolytic damage processes and relate them to chemical and structural changes observed through thermal analysis, vibrational spectroscopy, and electron microscopy. A detailed mechanistic examination supported by FTIR spectroscopy data identified the bisphenol A moiety as a primary target for degradation reactions. Results of computational modeling by the Stopping Range of Ions in Matter (SRIM) Monte Carlo simulation were in good agreement with damage analysis from surface and cross-sectional SEM imaging. All metrics indicated that ceria nanofillers reduce the damage area in polymer nanocomposites, and that nanofiller loading and homogeneity of dispersion are key to effective damage prevention. The results of this study represent a significant pathway for engineered irradiation tolerance in a diverse array of polymer nanocomposite materials. Numerous areas of materials science can benefit from utilizing this facile and effective method to extend the reliability of polymer materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

One-pot ethanol production under optimized pretreatment conditions using agave bagasse at high solids loading with low-cost biocompatible protic ionic liquid

Agave bagasse (AG) is a potential bioenergy feedstock due to its high biomass productivity, even in semiarid lands. In particular, ionic liquid (IL) pretreatment using aprotic ILs (AILs) has greatly reduced AG recalcitrance towards downstream processing by lowering lignin content and achieving high sugar yields. However, AIL's low biocompatibility towards enzymes and bacteria combined with the high initial cost has limited further development of this technology. In a wash-free one-pot (OP) ethanol conversion process, the evaluation of AG pretreatment with a biocompatible low-cost protic IL (PIL), 2-hydroxyethylammonium acetate ([2-HEA][OAc]) was achieved, where PIL pretreatment was followed by enzymatic saccharification, then ethanol fermentation in a single vessel. The pretreatment conditions were optimized using a central composite design to enable high sugar conversion at low PIL content. Under optimized pretreatment conditions (160 °C, 60% IL loading and 1.5 h), a yield of 132 kg of ethanol per Ton of untreated biomass was estimated using high solids loading (30% solids loading) under a PIL-OP scheme. High lignin removal (>50%), a decreased cellulose crystallinity, and high glucan conversion (>85%) were achieved with PIL-pretreated AG comparable to yields obtained in an AIL-AG pretreated sample using 1-ethyl-3-methyl-imidazolium acetate ([C 2 C 1 Im][OAc]). Here, these results using [2-HEA][OAc] demonstrate the potential of AG in an OP scheme with improved total ethanol yields paving the way towards a more feasible IL-based biorefinery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Higher loadings of Pt single atoms and clusters over reducible metal oxides: application to C–O bond activation

We develop higher loadings of isolated noble metal atoms and clusters on a mildly reducible metal oxide. Here we demonstrate the approach for Pt supported on TiO 2 and confirmed it by XRD, AC-HAADF-STEM, CO-FTIR, XAS, and XPS. Density functional theory calculations rationalize the experimental stability and the IR shifts using mixtures of CH 3 I and CO. The redispersed catalysts are thermally stable in inert gas or H 2 and afford enhanced selectivity and activity in hydrodeoxygenation reactions compared to metal nanoparticles by creating surface oxygen vacancies that promote C–O cleavage without side reactions. Higher metal loadings, e.g., 1%Pt/TiO 2 , on the oxide surface profoundly increase the activity of the bare oxide catalyst tenfold compared to ultra-low loadings typically used for single atom catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Stable cycling of high-mass loaded MnO 2 electrodes for sodium-ion batteries

Achieving cost-effective, sustainable solutions for large-scale energy storage are critical for advancing the global clean energy transition. In view of the challenges posed by limited lithium reserves, low-cost sodium-ion batteries (SIBs) have emerged as a promising direction, especially for grid-level energy storage. Among the various battery electrode materials, manganese dioxide (MnO 2 ) stands out as a favorable choice for such large-scale applications due to its earth abundance, cost-effectiveness, and non-toxic nature. Although MnO 2 is known as a pseudocapacitive material with superior cycling stability in aqueous electrolytes, its dissolution in non-aqueous electrolytes has restricted its use in long-lifetime batteries. In this study, we address two issues which have limited the use of MnO 2 electrodes in non-aqueous electrolytes. First, using electrochemical quartz crystal microbalance measurements in combination with other electrochemical methods, we demonstrate that diglyme (bis(2-methoxyethyl) ether) electrolyte can achieve stable cycling of electrodeposited ε-MnO 2 . These results enable us to tackle a second objective, that is increasing the mass loading of the MnO 2 electrode, since achieving high areal energy density is a significant factor in reducing manufacturing costs. Using 3D printed graphene aerogel (GA) as a scaffold, our studies show that the electrodeposited MnO 2 /GA electrodes possess scalable properties with mass loadings from 20 to 80 mg cm −2 . The resulting electrodes exhibit areal energy densities as high as 4.4 mA h cm −2 at a current density of 10 mA cm −2 . The high mass loaded MnO 2 electrodes were incorporated as a cathode in a SIB which used TiO 2 as the anode. The SIB device exhibited excellent performance with power densities in excess of 70 mW cm −2 . These studies highlight the promise of MnO 2 electrodes for use in a low-cost technology for large-scale energy storage.

25 ENERGY STORAGE↗
DOE OSTI2021

Load dynamics of double planar foil liners and double planar wire arrays on the UM MAIZE LTD generator

In previous studies using the University of Nevada, Reno's (UNR's) high-impedance Zebra Marx generator (1.9 Ω, 1.7 MA, 100 ns), Double Planar Wire Arrays (DPWAs) proved to be excellent radiators, and Double Planar Foil Liners (DPFLs) proved useful for future inertial confinement fusion applications. This article presents the results of joint UNR/UM (University of Michigan) experiments with aluminum (Al) DPWAs, Al DPFLs, and tungsten (W) DPWAs using UM's Michigan Accelerator for Inductive Z-Pinch Experiments (MAIZE) generator, a low-impedance Linear Transformer Driver (LTD) (0.1 Ω, 0.5–1 MA, and 100–250 ns). The main goals of this study were twofold: the first was a pioneering effort to test whether a relatively heavy Al DPFL could successfully be imploded on a low-impedance university-scale LTD like the MAIZE generator, and, if so, to analyze the results and make comparisons to the optimized, lighter DPWA configurations that have been previously studied. The DPWAs consisted of two planes of micrometer-scale diameter Al or W wires, while the DPFLs consisted of two planes of micrometer-scale thickness Al foils. Diagnostics include filtered Si-diodes, an absolutely calibrated filtered PCD, x-ray pinhole cameras, spectrometers, and gated optical self-emission imaging. The implosion dynamics and radiative properties of Al DPWAs and DPFLs and W DPWAs on the MAIZE LTD are discussed and compared. Time-dependent load inductance calculations derived from measurements of the load current and a MAIZE circuit model provide a relative measurement of pinch strength. In experiments on MAIZE, W planar wire arrays exhibited a higher peak load inductance throughout the pinch than Al DPWAs and DPFLs, while x-ray pulses from Al DPFLs had the longest emission duration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Characterization of self-magnetic pinch radiographic diode performance on RITS-6 at Sandia National Laboratories. II. Coupling between the inductive voltage adder and the SMP load

The self-magnetic pinch (SMP) diode is a type of radiographic diode used to generate an intense electron beam for radiographic applications. At Sandia National Laboratories, SMP was the diode load for the six-cavity radiographic integrated test stand inductive voltage adder (IVA) driver operated in a magnetically insulated transmission line (MITL). The MITL contributes a flow current in addition to the current generated within the diode itself. Extensive experiments with a MITL of 40Ω load impedance [T. J. Renk et al., Phys. Plasmas 29, 023105 (2022)] indicate that the additional flow current leads to results similar to what might be expected from a conventional high-voltage interface driver, where flow current is not present. However, when the MITL flow impedance was increased to 80 Ω, qualitatively different diode behavior was observed. This includes large retrapping waves suggestive of an initial coupling to low impedance as well as diode current decreasing with time even as the total current does not. A key observation is that the driver generates total current (flow + diode) consistent with the flow impedance of the MITL used. The case is made in this paper that the 80Ω MITL experiments detailed here can only be understood when the IVA-MITL-SMP diode is considered as a total system. Additionally, the constraint of fixed total current plus the relatively high flow impedance limits the ability of the diode (whether SMP or other type) to act as an independent load. An unexpected new result is that in tracking the behavior of the electron strike angle on the converter as a function of time, we observed that the conventional cIV x “Radiographic” radiation scaling (where x~2.2) begins to break down for voltages above 8 MV, and cubic scaling is required to recover accurate angle tracking.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Aerodynamic Analysis of Wind Loading on Parabolic Trough Collectors Using High-Fidelity CFD Modeling

Wind loading on parabolic solar collector support structures is the key driver for material costs. As identified by NREL's CSP Best Practices project [1], ability to predict wind-loading in deep-arrays and the impact of edge effects has potential to decrease levelized cost of electricity (LCoE) by 15%. In this study, we present a high-fidelity computational model that can model the flow around deep arrays of parabolic troughs under varying turbulent inflow conditions. Ability to accurately reproduce atmospheric boundary layer (ABL) profiles is first demonstrated through Large Eddy Simulation (LES) simulations and compared against wind tunnel measurements. Thereafter, unsteady turbulent flow past single row and six row configurations is computed using hybrid RANS/LES simulations. Investigations of wind loading, through parametric tilt angle variations of single row and on waked collectors in six-row configuration, are used to highlight design considerations for parabolic troughs only possible through high-fidelity unsteady calculations.

aerodynamics↗
DOE OSTI2024

Process for the Recovery of Actinide and Lanthanide Oxides via Thermal Decomposition and Calcination of Loaded Diglycolamide Resin

Diglycolamide (DGA) resin, a product produced by Eichrom Technologies, Inc. employs TODGA (N,N,N',N'-tetraoctyldiglycolamide) as the active extractant, which will be used by Savannah River National Laboratory to extract trivalent actinides and lanthanides from dissolved irradiated Mark-18A targets. The final form of the extracted material will be an oxide suitable for shipment. A two-step process was developed and validated for the direct recovery of actinides and lanthanides loaded on I-grade DGA resin as nitrates by thermally drying and decomposing resin loaded with Nd(III), a surrogate for trivalent actinides and lanthanides, under inert conditions followed by calcining the resultant residue in air to provide an oxide product. Further, a stepwise heating profile up to 385°C under argon gas flow resulted in 85% to 89% mass loss during the resin drying and decomposition step, and calcination of the resultant Nd-loaded resin residue provided an overall material mass loss of ≥ 98%. Recoveries from resin saturated with Nd(III) from 7 M and 0.35 M nitric acid subjected to this process were 30.7 mg and 27.6 mg Nd/g dry resin, respectively, representing an average of 96.1% of Nd retained in the resin bed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Assessing the performance of global thermostat adjustment in commercial buildings for load shifting demand response

Abstract Efficiently leveraging new sources of flexibility is critical to mitigating load balancing challenges posed by variable renewable resources. The thermal inertia of commercial buildings allows us to shift their power consumption on minute to hourly timescales to provide demand response to the grid while maintaining occupant comfort. Global thermostat adjustment (GTA) provides a readily available and scalable approach for implementing load shifting demand response using commercial heating, ventilation, and air conditioning (HVAC) systems, since it leverages the inherent sophistication of modern building automation systems. However, there is an incomplete understanding of GTA’s performance for this purpose and its impact on building systems and occupant comfort. In this paper, we explore the performance of GTA by analyzing results from nearly nine hundred experiments on eight university campus buildings in Michigan and North Carolina. Using GTA, we manipulate each building’s thermostat setpoints causing the building to shift its power consumption with respect to its baseline. We quantify the magnitude of HVAC power response, energy use of HVAC subsystems, and impact on occupant comfort. Finally, we connect our experimental results with power system operation using an optimization model that coordinates GTA actions across a large collection of grid-interactive efficient buildings (GEBs) to reduce high ramp rates on the grid and mitigate renewable energy curtailment. Overall, our work finds that the impacts on HVAC subsystems are often complex, and may result in additional energy being consumed by fans and terminal reheat. These effects must be considered when using GTA for load shifting. Additionally, we demonstrate that occupant comfort, as assessed by indoor temperature and humidity, can be maintained during GTA events. From a societal perspective, our modeling work finds that the additional renewable energy that can be integrated through the use of GTA strategies eclipses any additional energy consumed by buildings.

Keskar, Aditya (ORCID:0000000244617980)↗