Search NASA⌕ Search

SEARCH · Search NASA

Results for “Layered Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Growth of FePt encapsulated carbon nanotubes by thermal chemical vapor deposition

FePt encapsulated carbon nanotubes (CNTs) were grown by thermal chemical vapor deposition using an Fe/Pt bilayer catalyst. The CNTs were grown according to the base growth model. Selected area electron diffraction results revealed that the encapsulated particles were A1-FePt, L1{sub 0}-FePt, and Fe{sub 3}PtC. The crystal structures of particles found at the root parts of CNTs were not able to be identified, however. The layered structure of catalytic films seemed to be responsible for the difference in Pt content between particles found at tip and root parts of CNTs. Approximately 60% of CNTs grown at 800 °C had particles at their tip parts, compared to only 30% when the growth temperature was 700 °C, indicating that higher process temperatures promote particle encapsulation in CNTs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dimensional reduction upon calcium incorporation in Cs 0.3 (Ca 0.3 Ln 0.7 )PS 4 and Cs 0.5 (Ca 0.5 Ln 0.5 )PS 4

A series of Ca-containing lanthanide thiophosphates has been obtained and their structural evolution from 3D for LnPS 4 and Cs 0.3 (Ln 0.7 Ca 0.3 )PS 4 to 2D in Cs 0.5 (Ln 0.5 Ca 0.5 )PS 4 was shown as a function of Ca content. The first series with an idealized formula of Cs 0.3 (Ca 0.3 Ln 0.7 )PS 4 crystallizes in the R3¯m with combining macron]m space group and belongs to a new structure type that consists of a channel containing [(Ca 0.3 Ln 0.7 )PS 4 ] 0.3– framework, where the channels are occupied by severely disordered Cs + cations. A second new series with formula Cs 0.5 (Ca 0.5 Ln 0.5 )PS 4 crystallizes in the monoclinic C2/c space group and exhibits a layered structure consisting of [(Ca 0.5 Ln 0.5 )PS 4 ] 0.5– layers with Cs + cations located between the layers for charge balance. Together with the parent structure type, LnPS 4 , these three structure types illustrate how the LnPS 4 structure changes with Cs + cation incorporation, reducing its dimensionality from 3D to 2D. The magnetic properties of Cs 0.3 [(Ca 0.3 Ce 0.7 )PS 4 ] and Cs 0.3 [(Ca 0.3 Pr 0.7 )PS 4 ] were studied and revealed no magnetic transition down to 2 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen-Doped Polymeric Carbon Monoxide at High Pressure

The ability to control materials stability, bonding, and transformation by thermo-mechanical and chemical means is significant for development of high-energy-density extended solids. We report that doping hydrogen (~10%) in carbon monoxide (CO) can greatly lower the polymerization pressure of CO and enhance the stability of recovered polymeric CO products at ambient conditions. Hydrogen-doped CO crystallizes into well-grown dendrites of β-CO-like phase at 3.2 GPa, which polymerizes to highly unsaturated black polymer (phase I) at ~4.7 (5.8) GPa. Upon further compression, this highly colored polymer transforms into a translucent 3D network structure (phase II) at 6–7 (10–17) GPa and then a transparent 2D layer structure (phase III) at 20–30 (30–60) GPa. A similar series of transformations are also found in pure CO but at considerably higher transition pressures, as noted in parentheses. All polymeric phases are recoverable at ambient conditions, exhibiting an array of phase stability and novel properties such as chemically unstable phase I, highly luminescent phase II, and highly transparent layered phase III. The density of recovered products ranges from ~2.3 g/cm 3 to 3.6 g/cm 3 , depending on the pressure recovered. The recovered products are highly disordered but slowly decompose to crystalline solids of anhydrous polymeric oxalic acid while exhibiting interesting crystal morphologies such as nm-cobs, nm-lamellar layers, and μm-bales. Here, the present first-principles MD simulations suggest that the polymerization occurs at 6 (or 10) GPa in H 2 -doped (or pure) CO. While not directly participating in the reaction, the role of H 2 molecules is to enhance the mobility of CO molecules leading to the polymerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of Thermal Diffusivity Degradation of Irradiated Zirlo and SiC-SiC Composite

Zirlo (Zircaloy cladding material from Westinghouse) has been widely used as the fuel cladding material in Light Water Reactors because of its high melting point, low susceptibility to corrosion, good thermal and mechanical shock resistance, and low degradation of mechanical properties under irradiation. But as Zirlo reacts with water at high temperature, which can trigger serious accidents, efforts have been made to explore better candidates to replace Zirlo in the water-cooled reactors. SiC-SiC composite is considered as one of the most viable options due to its comparable mechanical performances and corrosion resistance. However, one of the most important properties, thermal diffusivities of both Zirlo and SiC-SiC composite, and their degradation after irradiation, are not well known yet. Ion-irradiated samples are used to study the thermal property degradation caused by irradiation instead of the neutron-irradiated ones due to the significantly lower radioactivity. The microstructural damage is estimated from the software simulation SRIM/TRIM based on the energy and fluence of the ion, and the target material, and represented by DPA (displacement by atom). Different from neutron-irradiated samples, the damaged layer of ion-irradiated samples is only a few to a few tens of micrometers thick, and the damage is depth dependent. It is impossible to directly measure the bulk property change, and a microscale measurement technique is necessary. Laser-based photothermal reflectance technique is one of the ideal methods to measure local thermal conductivity and diffusivity with high spatial resolution. The main principle of this technique is to heat the solid sample using an intensity-modulated laser, and scan the sample with a constant intensity continuous-wave (CW) laser to detect the thermal wave propagation. On bulk, isotropic material, if the heating laser intensity is modulated as a sine wave, thermal diffusivity of the sample can be derived from the phase lag of the thermal wave, scan distance and modulation frequency in a straight forward manner. By using more specific analytical models, thermal conductivity and diffusivity in complicated cases, such as layered structure materials, composite materials, and/or anisotropic materials, are measurable as well. In this work, thermal diffusivity of the light damage layer of the post-irradiation Zirlo and SiC-SiC composite are measured and compared. The Zirlo sample is irradiated by Ni{sup 9+} ion, and SiC-SiC composite material is irradiated by Si{sup 7+} ion. The peak DPA of both sample is similar as ∼10. For ion-irradiated materials, DPA is known to increase with depth before it reaches the peak, and then sharply drop to zero. In term of light damage layer in this manuscript, we mean by the layer with a DPA smaller than 5% maximum value. In this layer DPA increases slowly and smoothly with depth, and the structure and thus thermal properties are more spatially uniform. For the SiC-SiC composite, the measurements are separately conducted on fibers along radial or axial direction, and on the matrix. Our measurement results show that with similar microstructural damage, thermal diffusivity of matrix SiC reduces more significantly than that of Zirlo. For fiber SiC that has a much lower thermal diffusivity than the matrix SiC before irradiation, the post-irradiation effect on thermal diffusivity is not obvious.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A monoclinic polymorph of sodium birnessite for ultrafast and ultrastable sodium ion storage

Sodium transition metal oxides with layered structures are attractive cathode materials for sodium-ion batteries due to their large theoretical specific capacities. However, these layered oxides suffer from poor cyclability and low rate performance because of structural instability and sluggish electrode kinetics. In the present work, we show the sodiation reaction of Mn 3 O 4 to yield crystal water free NaMnO 2–y–δ (OH) 2y , a monoclinic polymorph of sodium birnessite bearing Na/Mn(OH) 8 hexahedra and Na/MnO 6 octahedra. With the new polymorph, NaMnO 2–y–δ (OH) 2y exhibits an enlarged interlayer distance of about 7 Å, which is in favor of fast sodium ion migration and good structural stability. In combination of the favorable nanosheet morphology, NaMn 2–y–δ (OH) 2y cathode delivers large specific capacity up to 211.9 mAh g –1 , excellent cycle performance (94.6% capacity retention after 1000 cycles), and outstanding rate capability (156.0 mAh g –1 at 50 C). This study demonstrates an effective approach in tailoring the structural and electrochemical properties of birnessite towards superior cathode performance in sodium-ion batteries.

25 ENERGY STORAGE↗

Syntheses, structures and photoluminescence of lanthanide-organic frameworks assembled from multifunctional N,O-donor ligand

Four new lanthanide complexes [Ln(O–NCP){sub 2}(NO{sub 3})]{sub n} based on multifunctional N,O-donor ligand 2-(2-carboxyphenyl)imidazo(4,5-f)-(1,10)phenanthroline (O–HNCP) and Ln(NO{sub 3}){sub 3}·6H{sub 2}O (Ln=Nd(1), La(2), Sm(3), Eu(4)) have been achieved under hydrothermal conditions and characterized by elemental analyses, infrared spectra and single crystal X-ray diffraction. Structural analyses revealed that all of these four complexes possess similar two-dimensional layer structures. In addition, thermal stability and luminescent properties of these complexes were also investigated. - Graphical abstract: A series of lanthanide(III) coordination polymers with intriguing structures based on 2-(2-carboxyphenyl)imidazo(4,5-f)-(1,10)phenanthroline ligand have been hydrothermally synthesized. The thermal stabilities and photoluminescence properties of these complexes have been investigated. - Highlights: • Four lanthanide(III) complexes have been hydrothermally synthesized. • The N,O-donor O–HNCP was used as the ligand. • TGA and PL properties of complexes 1–4 have been investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating the performance of catalyst layer micro-structures with different platinum loadings

In this study a four-phase micro-structure of a PEFC catalyst layer was reconstructed by randomly placing overlapping spheres for each solid catalyst phase. The micro-structure was mirrored to make a micro-structure. A body-fit computational mesh was produced for the reconstructed micro-structure in OpenFOAM. Associated conservation equations were solved within all the phases with electrochemical reaction as the boundary condition at the interface between ionomer and platinum phases. The study is focused on the platinum loading of CL. The polarization curves of the micro-structure performance have been compared for different platinum loadings. This paper gives increased insight into the relatively greater losses at decreased platinum loadings.

08 HYDROGEN↗

High spatial resolution neutron imaging of lithium-ion batteries: Correlating microstructure and lithium transport

Thick electrodes for lithium-ion batteries can increase the overall energy density, but increasing the electrode thickness introduces charge transport limitations. These limitations may be mitigated through proper electrode structuring. Here, high spatial resolution neutron imaging was used to understand the correlation between microstructure and lithium transport in lithium-ion anodes. Batteries with distinct graphite anode microstructures were produced and studied with high spatial resolution in operando neutron radiography to observe the effects of structure on transport. High spatial resolution neutron computed tomography was performed following in operando neutron radiography. X-ray computed tomography and scanning electron microscopy were used to observe the finer scale anode structure to complement neutron imaging. Solvent-free anodes containing a tightly-packed layered structure confined lithium movement close to the separator. This structure limited capacity, but supported better rate capability. Conversely, a more open pore structure in the wet cast anodes yielded higher capacity with reduced rate capability. Together, these results show that lithium distributions can be controlled by the macroscopic structure of the electrodes, the microstructural pore network, and the microscale active areas that support electrochemical reactions. Furthermore, multimodal imaging applying the complementary strengths of neutron and X-ray methods is shown as a tool for advancing battery design.

25 ENERGY STORAGE↗

Chemical structure of vanadium-based contact formation on n-AlN

We have investigated the chemical interaction between a Au/V/Al/V layer structure and n-type AlN epilayers using soft x-ray photoemission, x-ray emission spectroscopy, and atomic force microscopy. To understand the complex processes involved in this multicomponent system, we have studied the interface before and after a rapid thermal annealing step. We find the formation of a number of chemical phases at the interface, including VN, metallic vanadium, aluminum oxide, and metallic gold. An interaction mechanism for metal contact formation on the entire n-(Al,Ga)N system is proposed.

36 MATERIALS SCIENCE↗

Organic Thin-Film Solar Cells Based on Donor-Acceptor Interpenetrating Nano-Interface

Photovoltaic cells with interpenetrating interfaces between a conducting polymer layer and a fullerene layer fabricated by a solvent corrosion method have been investigated. Using a weakly dissoluble combination of a solvent and an underlayer film, we fabricated a ''semi-layered'' structure that was maintaining a bilayer structure and furthermore interpenetrating at the interface of the conducting polymer and the fullerene layers. In these cells, high external quantum efficiencies (EQE) were obtained. The photovoltaic properties have been interpreted by the effective absorption of incident photons around the interface of conducting polymer and fullerene, the interpenetrating fullerene / conducting polymer interface involving the efficient photo-induced charge transfer, and the short distance between the electron-generation region and electrode resulting in the enhancement of the electron collection to the electrode. In these cells, both of the efficient exciton dissociations at the interpenetrating interface and the efficient carrier transports by each continuous pathway for electrons between fullerene molecules and for holes between conducting polymers occur.

36 MATERIALS SCIENCE↗

High pressure Raman spectroscopic studies of (p−chloroanilinium){sub 2}CuCl{sub 4}

(p−chloroanilinium){sub 2}CuCl{sub 4} has a corner shared layered structure of CuCl6{sup 4−} octahedra with p-chloroanilinium cation sandwiched between the layers. The CuCl{sub 6} octahedra are irregular due to Jahn-Teller distortion. We report our high pressure Raman results on this compound in the present manuscript. Our results indicate significant changes in Raman spectra at ∼ 3 GPa and ∼ 8 GPa. The changes at 3 GPa can be attributed to a reduction in puckering of the CuCl{sub 4}{sup 2−} layer and the transition at 8 GPa, which also leads to a colour change of this sample to deep red, could be due to delocalization of the eg electrons along with a reduction of the cooperative Jahn-Teller distortion in this layer. These changes were found to be reversible.

36 MATERIALS SCIENCE↗

Weyl points in photonic-crystal superlattices

In this paper, we show that Weyl points can be realized in all-dielectric superlattices based on three-dimensional (3D) layered photonic crystals. Our approach is based on creating an inversion-breaking array of weakly-coupled planar defects embedded in a periodic layered structure with a large omnidirectional photonic band gap. Using detailed band structure calculations and tight-binding theory arguments, we demonstrate that this class of layered systems can be tailored to display 3D linear point degeneracies between two photonic bands, without breaking time-reversal symmetry and using a configuration that is readily-accessible experimentally. These results open new prospects for the observation of Weyl points in the near-infrared and optical regimes and for the application of Weyl-physics in integrated photonic devices.

14 SOLAR ENERGY↗

A Framework for Lattice QCD Calculations on GPUs

Efficient calculation of the greatest common divisor (GCD) for big integers each whose number of bits is greater than or equal to 1024 has drawn a considerable amount of attention because it can be used to detect a weakness of the RSA security infrastructure. This paper presents a parallel binary GCD algorithm and its implementation for big integers on the Intel Xeon Phi coprocessor. This algorithm is capable of computing GCDs efficiently on many pairs of big integers in parallel by utilizing all cores on a Xeon Phi coprocessor as well as taking advantage of all vector processing units of the coprocessor to speed up critical integer operations within the algorithm. Using 240 threads on a Xeon Phi coprocessor to carry out GCD calculations for a large amount of 2048-bit integers, the implementation achieves the speedup of 30 times over a sequential binary GCD algorithm implementation on a single CPU core, and it delivers twice amount of performance in comparison to the same sequential binary GCD implementation running on 240 threads of the Xeon Phi.

Winter, F. T.↗

Impact of surface hydrophilicity on the ordering and transport properties of bicontinuous microemulsions

Microemulsions (MEs) have many industrial applications, where recent developments have shown that MEs can be utilized for electrochemical applications, including potentially in redox flow batteries. However, understanding the structure and dynamics of these systems, including at a surface, is needed to direct and rationally control their electrochemical behavior. While bulk solution measurements have provided insight into their structure, their assembly at an interface also impacts the electron (to the electrode) and ion (across the surfactant) charge transfer processes in the system. To address this shortcoming, neutron reflectivity experiments and molecular simulations have been completed that document the near surface structure of a series of deuterated water (D 2 O)/polysorbate-20/toluene MEs on hydrophilic and amphiphilic surfaces. These results show that the microemulsions form complex layered structures near a hard electrode surface, where most layers are not purely one component. Decreasing the D 2 O concentration in the ME increases the number of and purity of the layers established on the solid surface. These lamellar-type layers transition from the surface to the bulk microemulsion as a series of mixed layers (i.e., containing oil, water, and surfactant) that are consistent with perforated lamellae. Additionally, these mixed lamellae appear to become more perforated with oil and water pathways on an amphiphilic surface. Furthermore, the purity and thickness of these layers will influence the accessibility of an electrode by redox active species, as well as ion transport required to satisfy the electroneutrality condition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallographic analysis of the structure of livingstonite HgSb{sub 4}S{sub 8} from refined data

An X-ray diffraction study of mineral livingstonite (HgSb{sub 4}S{sub 8}) from Khaydarkan (Kyrgyzstan) has been performed on a Bruker Nonius X8Apex diffractometer with a 4K CCD detector (R = 0.031). The unit-cell parameters were found to be a = 30.1543(10) A, b = 3.9953(2) A, c = 21.4262(13) A, {beta} = 104.265(1){sup o}, V = 2501.7(2) A{sup 3}, Z = 8, d{sub calcd} = 5.013 g/cm{sup 3}, and sp. gr. A2/a. It was confirmed that livingstonite belongs to rod-layers structures. In one type of layer, two double Sb{sub 2}S{sub 4} chains are bound by disulfide groups [S{sub 2}]{sup 2-} (S-S 2.078(2) A); in the other type, these chains are bound via Hg{sup 2+} cations. A crystallographic analysis confirmed the existence of independent pseudotranslational ordering in the cation and anion matrices, which is characteristic of the lozenge-like structures of sulfides and sulfosalts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Long- and Short-Range Constraints for the Structure Determination of Layered Silicates with Stacking Disorder

Layered silicates have important applications as host materials, supports for catalysis, and zeolite precursors. However, their local structures are often challenging to establish due to disorder of the sheet assemblies. We present a new protocol that combines long- and short-range structural constraints from diffraction and solid-state NMR techniques, respectively, to determine the molecular structure of layered silicates in the presence of various extents of stacking disorder. Solid-state 29Si NMR data are largely insensitive to the incomplete extent of three-dimensional (3D) crystallinity that limits the interpretation of diffraction data alone to the identification of possible unit cells and space groups. State-of-the-art NMR crystallography techniques consequently provide a simplified view of materials from which candidate framework structures can be built and evaluated based on local structural constraints, including interatomic distances, Si site numbers and multiplicities, and Si–O–Si connectivities, and refined using density functional theory. This protocol was applied to a new layered silicate material named CLS-1, of composition [Si5O11H][C9N2H15]·1.9(H2O), synthesized by using a fluoride-based protocol and cationic alkylaminopyridinium as a structure-directing agent (SDA). Despite the intrinsic complexity and partial ordering of the intersheet arrangements and organic–inorganic interactions, this led to the identification of a single space group that is compatible with both NMR and diffraction data, from which the silicate framework structure could be established,. The remarkable similarities between the layered framework structures of CLS-1, HUS-2 (Tsunoji et al. J. Mater. Chem.2012, 22, 13682), and another layered silicate material with a radically different morphology and extent of stacking order and interlayer dynamics, established by using a similar approach (Brouwer et al. J. Am. Chem. Soc.2013, 135, 5641), point to the remarkable robustness of this previously unknown silicate framework type.

Cadars, Sylvian↗

Ion Beams: A Powerful Tool for Making New Functional Materials

It is well known that ion beams play an important role in semiconductor industry, which utilizes ion implantation and irradiation for materials modification. Ion sputtering technique is used to fabricate multifunctional coatings and multilayers. Using ion implantation, there is a continued effort for fabrication of quantum bit structures for future quantum computers. Availability of focused ion beams (FIBs) has widened the applications of ion beams and nanostructured functional materials are being fabricated using FIBs. Various quantum structures can be fabricated using FIB. Ferromagnetism can either be induced or destroyed in special layered structures using ion irradiation. The magnetic exchange bias phenomenon is of tremendous utility in magnetic recording. Issues of lateral diffusion in nanoscale doping of semiconductors by FIB and an example of exchange bias enhancement by ion irradiation are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗