Search NASA⌕ Search

SEARCH · Search NASA

Results for “Liquid structure simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Rolling Beam Umbilical System

The decision to make the Centaur Vehicle a Space Transportation System (STS) payload meant that new ground support equipment provisions at Launch Pads Pads 39A and 39B were required. These new equipment provisions were needed to service the Centaur vehicle while it was installed in the Orbiter's payload bay prior to launch. This paper describes the design of a new rolling beam umbilical syste (RBUS) being added to the pad fixed service structure (FSS) in order to provide the primary functions of liquid hydrogen (LH2) fill, drain, and vent. The carrier plate itself is a Government-furnished equipment item and of necessity became a T-O disconnect. This permits quick offloading in the event of an abort prior to lift-off. In addition to the rolling beam structure, mechanisms, and fluid lines, it was necessary to design and build a carrier plate simulator to support early development testing of the mast at the Launch Equipment Test Facility at Kennedy Space Center. The RBUS is designed to be compatible with the rotating service structure (RSS) to the extent that the umbilical may be deployed with the RSS mated with the vehicle. It is also designed to clear the RSS as the RSS rotates back out of the way. Accessibility to the Orbiter aft compartment via the 50-1 door had to be maintained.

Tatem, B. C., Jr.↗
NASA NTRS2023

Toward Accurate Thermal Modeling of Phase Change Material Based Photonic Devices

Reconfigurable or programmable photonic devices are rapidly growing and have become an integral part of many optical systems. The ability to selectively modulate electromagnetic waves through electrical stimuli is crucial in the advancement of a variety of applications from data communication and computing devices to environmental science and space explorations. Chalcogenide-based phase change materials (PCMs) are one of the most promising material candidates for reconfigurable photonics due to their large optical contrast between their different solid-state structural phases. Although significant efforts have been devoted to accurate simulation of PCM-based devices, in this paper, we highlight three important aspects which have often evaded prior models yet having significant impacts on the thermal and phase transition behavior of these devices: the enthalpy of fusion, the heat capacity change upon glass transition, as well as the thermal conductivity of liquid-phase PCMs. We further investigated the important topic of switching energy scaling in PCM devices, which also helps explain why the three above-mentioned effects have long been overlooked in electronic PCM memories but only become important in photonics. Our findings offer insight to facilitate accurate modeling of PCM-based photonic devices and can inform the development of more efficient reconfigurable optics.

Phase change materials↗
DOE OSTI2024

Melting point of iron at high pressure: An assessment of uncertainties and effect of electronic temperature

An accurate calculation of the melting point of iron at various pressures in the Earth's core is important for understanding the core structure, geodynamo, and the Earth's history. Previous studies have assessed the melt line of iron at these extreme conditions using various experimental measurement techniques as well as both ab initio and classic molecular dynamics simulations. However, experimental measurements have uncertainties up to several hundred Kelvin, and inconsistencies remain among simulation results. Here in this work, we propose an iterative framework that couples density functional theory (DFT) calculations and molecular dynamics simulations performed using an ensemble of interatomic potentials to assess the effect of electronic temperature on the melting point. We systematically validate the potentials by comparing lattice constants and phonon dispersion curves at 0 K and enthalpy differences between liquid and HCP, FCC, BCC phases of iron close to the melt line at 300 GPa with DFT. Our results show that HCP iron melts at 6144 K (at 300 GPa), BCC phase is thermodynamically unstable, and FCC is metastable at this temperature. The melting points of FCC and BCC phases at 300 GPa are 5858 and 5647 K, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2014

Tank Applied Testing of Load-Bearing Multilayer Insulation (LB-MLI)

The development of long duration orbital cryogenic storage systems will require the reduction of heat loads into the storage tank. In the case of liquid hydrogen, complete elimination of the heat load at 20 K is currently impractical due to the limitations in lift available on flight cryocoolers. In order to reduce the heat load, without having to remove heat at 20 K, the concept of Reduced Boil-Off uses cooled shields within the insulation system at approximately 90 K. The development of Load-Bearing Multilayer Insulation (LB-MLI) allowed the 90 K shield with tubing and cryocooler attachments to be suspended within the MLI and still be structurally stable. Coupon testing both thermally and structurally were performed to verify that the LB-MLI should work at the tank applied level. Then tank applied thermal and structural (acoustic) testing was performed to demonstrate the functionality of the LB-MLI as a structural insulation system. The LB-MLI showed no degradation of thermal performance due to the acoustic testing and showed excellent thermal performance when integrated with a 90 K class cryocooler on a liquid hydrogen tank.

Space Environment Simulation↗
DOE OSTI2019

Thermally reconfigurable Janus droplets with nematic liquid crystalline and isotropic perfluorocarbon oil compartments

We report that mixtures of perfluorocarbon oils and hydrocarbon mesogens can be used to prepare multi-compartment (Janus) emulsion drops comprising coexisting nematic liquid crystalline (LC) and isotropic oil phases. The droplets exhibit stable spherical shapes with internal Janus-type morphologies that can be tuned widely through changes in temperature or adsorbates. In particular, we observe evidence of preferential adsorption of hydrocarbon or fluorocarbon surfactants on the interfaces of nematic versus isotropic domains, respectively, providing added control over the droplet structure. Comparisons of experiments and numerical simulations using a Landau–de Gennes continuum model provide insight into the relative importance of the LC elasticity and orientational-dependent interfacial energies on droplet morphologies and properties. Here, we show that the hierarchical organization of the LC compartments generates optical properties and responsiveness not found in emulsions of isotropic oils.

42 ENGINEERING↗
DOE OSTI2022

Comparison of the static structure factor at long wavelengths for a dusty plasma liquid and other liquids

Especially small values of the static structure factor S(k) at long wavelengths, i.e., small k, were obtained in an analysis of experimental data, for a two-dimensional dusty plasma in its liquid state. For comparison, an analysis of S(k) data was carried out for many previously published experiments with other liquids. Here, the latter analysis indicates that the magnitude of S(k) at small k is typically in a range 0.02–0.13. In contrast, the corresponding value for a dusty plasma liquid was found to be as small as 0.0139. Another basic finding for the dusty plasma liquid is that S(k) at small k generally increases with temperature, with its lowest value, noted above, occurring near the melting point. Simulations were carried out for the dusty plasma liquid, and their results are generally consistent with the experiment. Since a dusty plasma has a soft interparticle interaction, our findings support earlier theoretical suggestions that a useful design strategy for creating materials having exceptionally low values of S(0), so-called hyperuniform materials, is the use of a condensed material composed of particles that interact softly at their periphery.

2-dimensional systems↗
DOE OSTI2025

Integrated Molten Salt Reactor Modeling Capabilities in NEAMS Thermal Hydraulics Tools

The DOE neams program supports a full range of computational thermal fluids analysis capabilities and code developments for a broad range of advanced reactor concepts. The research and development approach under the thermal fluids technical area synergistically combines three length and time scales in a hierarchical multi-scale approach. To enable multi-scale thermal fluids capability using these codes, a key joint effort has been underway to develop an integrated system- and engineering-scale thermal fluids analysis capability, through integration of SAM and Pronghorn codes, both based on the MOOSE framework. This report summarizes recent advances in developing an integrated system- and engineering-scale modeling capability for the msr concept, which has gained significant interest in recent years. A consistent framework was established by coupling Pronghorn and SAM through the Saline interface, with thermophysical properties provided by the Molten Salt Thermal Property Database (MSTDB-TP). Further improvements were made to the coupling schemes and domain-overlapping strategies, enhancing the stability and robustness of multi-code simulations. Verification and validation efforts demonstrate the accuracy of this integration across a range of benchmark problems, including one-dimensional heated pipe flows, three-dimensional natural convection loops with evolving isotopic compositions, and \gls{msre} demonstration cases. Within Pronghorn, new capabilities were introduced to model corrosion and noble-metal plating phenomena, supported by an extended thermal-hydraulics framework and refined turbulence treatments. To capture two-phase flow behavior, a multiphase Euler–Euler model was implemented in Pronghorn, including advanced closure relations, high-resolution advection techniques, and capillary force reconstruction. Preliminary verification cases confirm the fidelity of the approach, while planned validation efforts target canonical multiphase benchmarks and application to msr components such as the msre pump bowl. Finally, updates to SAM’s msr mass transfer modeling were extended to consider noble gas migration into porous structures like graphite. The point kinetics model was updated to include reactivity feedback contributions from any defined species, such as xenon. The gas transport model was expanded for applicability to gas mixtures, bubble efflux phenomena, and species transport between liquid and gas phases. A selection of multi-scale Sherwood number correlations from MOSCATO/NekRS and multi-phase correlations from literature have been added for improved accuracy in calculating mass transfer coefficients. A companion effort on developing system-level redox corrosion has also been incorporated into SAM. Collectively, these enhancements strengthen the predictive capability of SAM and Pronghorn for simulating MSR thermal-hydraulics, corrosion, multiphase behavior, and fission-product transport, providing a more complete toolset for design, safety analysis, and licensing support of next-generation \gls{msr}s.

42 - ENGINEERING↗
DOE OSTI2021

Interfacial thermal conductance between multi-layer graphene sheets and solid/liquid octadecane: A molecular dynamics study

Mixtures of paraffin and carbon nanofillers have promising potential for thermal storage, as paraffin (the matrix) possesses high latent heat and the nanofillers compensate for the low thermal conductivity (TC) of paraffin. Understanding thermal transport in these materials is essential for practical applications, as weak thermal transport hinders fast charge/discharge of thermal energy. Here, we use non-equilibrium molecular dynamics (NEMD) simulations to study the interfacial thermal conductance (ITC) between graphene sheets and octadecane (C18H38) matrix under the limiting conditions of the sheets being parallel or perpendicular to the direction of the imposed heat flux. The findings show that the systems containing thin graphene layers exhibit higher values of ITC. This study captures the asymptotic saturation of thermal conductance for the liquid phase of the perpendicular structure. Besides, given the greater number of structured layers of paraffin upon phase change, the ITC for the solid paraffin-graphene system is higher than the conductance of the liquid paraffin-graphene interface. We use the Pearson correlation coefficients of the vibrational power spectrum (VPS) of interfacing materials to explain the orders of magnitude variations of the observed ITC.

25 ENERGY STORAGE↗
DOE OSTI2026

Cooperative Lanthanide Solvation in an Ionic Liquid for Critical Materials Separations

Effectively separating critical materials, including intra-lanthanide separations, is crucial for meeting growing application demands. Liquid–liquid extraction (LLE) is the industry standard for lanthanide separations, where the selectivity can depend on small changes in metal coordination. In this work, we investigate representative lanthanide Eu coordination with a neutral malonamide extractant in an imidazolium bistriflimide ionic liquid (IL) solvent. Through systematic titrations of the water and extractant and under extraction conditions, we observe surprising cooperative Eu solvation with the IL anion and extractant. Time-resolved fluorescence spectroscopy measurements show strong extractant coordination in water-saturated IL. Lifetime measurements show no water coordination, and extended X-ray fine structure spectroscopy data provide a coordination number of 10. Molecular dynamics simulations confirm this coordination number and reveal IL anion coordination in the final Eu complex, even though it is ordinarily a significantly weaker ligand compared to water. The lack of water in the final extracted complex and IL anion coordination potentially explain the increased extraction in LLE systems using ILs, as evidenced by higher distribution ratios for cation exchange extraction, despite the energetic cost of cation transfer to the aqueous phase. These results highlight the opportunities for tuning metal coordination to drive extraction in unique solvent systems.

Carr, Amanda J.↗
DOE OSTI2019

Electroconvection in a Viscoelastic Electrolyte

Direct numerical simulations of a liquid electrolyte with polymer additives demonstrate that viscoelasticity promotes an earlier transition from steady to unsteady electroconvective flow. Viscoelasticity also decreases the overlimiting current resulting from convection by up to 40%. Both of these effects would reduce the time-averaged spatial variability of ion flux suggesting that polymeric fluids may inhibit dendrite growth. Polymer relaxation near a surface destabilizes the flow structures and decreases the time duration of high current fluxes. This mechanism of polymer-induced flux reduction is general to wall bounded flows with transfer of mass, heat or momentum.

42 ENGINEERING↗
DOE OSTI2025

Interactive multiscale modeling to bridge atomic properties and electrochemical performance in Li-CO 2 battery design

Li-CO 2 batteries are promising energy storage systems due to their high theoretical energy density and CO 2 fixation capability, relying on reversible Li 2 CO 3 /C formation during discharge/charge cycles. Here, we present a multiscale modeling framework integrating Density Functional Theory (DFT), Ab-Initio Molecular Dynamics (AIMD), classical Molecular Dynamics (MD), and Finite Element Analysis (FEA) to investigate atomic and cell-level properties. The considered Li-CO 2 battery consists of a lithium metal anode, an ionic liquid electrolyte, and a carbon cloth cathode with Sb 0.67 Bi 1.33 Te 3 catalyst. DFT and AIMD determined the electrical conductivities of Sb 0.67 Bi 1.33 Te 3 and Li 2 CO 3 using the Kubo–Greenwood formalism and studied the CO 2 reduction mechanism on the cathode catalyst. MD simulations calculated the CO 2 diffusion coefficient, Li + transference number, ionic conductivity, and Li + solvation structure. The FEA model, parameterized with atomistic simulation data, reproduced the available experimental voltage–capacity profile at 1 mA/cm 2 and revealed spatio-temporal variations in Li 2 CO 3 /C deposition, porosity, and CO 2 concentration dependence on discharge rates in the cathode. Accordingly, Li 2 CO 3 can form large and thin film deposits, leading to dispersed and local porosity changes at 0.1 mA/cm 2 and 1 mA/cm 2 , respectively. The capacity decreases exponentially from 81,570 mAh/g at 0.1 mA/cm 2 to 6200 mAh/g at 1 mA/cm 2 , due to pore clogging from excessive discharge product deposition that limits CO 2 transport to the cathode interior. Therefore, the performance of Li-CO 2 batteries can be improved by enhancing CO 2 transport, regulating Li 2 CO 3 deposition, and optimizing cathode architecture.

Battery performance↗
DOE OSTI2022

Detailed chemistry modeling of rotating detonations with dilute n -heptane sprays and preheated air

Utilization of liquid fuels is crucial to enabling commercialization of rotating detonation engines (RDE) in the near future. In this study, Eulerian-Lagrangian simulations are conducted for rotating detonative combustion with dilute n-heptane sprays and preheated air. Two-dimensional flattened configuration is used and a skeletal chemical mechanism with 44 species and 112 elementary reactions for n-heptane combustion is adopted. The flow structure, droplet distribution, and thermochemical parameters in the refill zone are first analyzed. It is shown that the mixture in the refill zone is heterogeneous, including evaporating droplets, vapor, and air. When the total temperature is below 950 K, the average equivalence ratio increases with the total temperature. When it is higher than 950 K, the average equivalence ratio is almost constant. Subsequently, the chemical explosive mode analysis is applied to identify the controlling reactions and dominant combustion modes in the fuel refill zone and reaction fronts. Results demonstrate that the initiation reaction (R104: n-C 7 H 16 + O 2 2-C 7 H 15 + HO 2 ) and low-temperature reaction (R107: RO 2 R'O 2 H) are dominant in the upstream and downstream of the refill zone, respectively. The intermediate species from low-temperature chemistry, R'O 2 H, is found to be important for the chemical explosive mode in the undetonated mixture. The influence of species diffusion and dispersed droplets is further analyzed. Results show that vapor autoignition facilitated by droplet evaporation occurs in the refill zone. Finally, the effects of the air total temperature on the detonation propagation speed and RDE propulsion performance are investigated. Further, it is found that the detonation propagation speed and specific impulse increase with air total temperature. The total pressure ratio first increases and then decreases as the air total temperature increases. Moreover, when the total temperature of the preheated air is above 1,300 K, the effects of low-temperature chemistry are negligible.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Interfacial Hydrogen-Bond Dynamics in Transition Metal Compounds

Understanding how water behaves when confined within atomic layers of active transition-metal carbides, nitrides, and carbonitrides is essential for uncovering the fundamental principles needed to engineer solid–liquid interfaces at the atomic scale. Yet, how lattice element chemistry and surface termination groups collectively regulate the structure and mobility of such interlayer water remains poorly understood. Here, we present a composition-controlled investigation of interlayer water dynamics in layered transition-metal nitride, carbide, and carbonitride systems using a systematic integration of quasi-elastic neutron scattering (QENS), ab initio molecular dynamics (AIMD) simulations, and density functional theory (DFT) calculations. QENS measurements show that nitride-rich systems host mobile, translationally diffusing water with thermally activated self-diffusion coefficients on the order of 10 –10 m 2 s –1 , whereas mixed C/N lattices confine water to localized, nontranslational motion that is insensitive to temperature. AIMD and DFT reveal that lattice C/N chemistry and surface functional group composition reshape the first hydration layer by modulating the surface electronic structure and termination-dependent hydrogen-bond networks, leading to pronounced differences in water ordering and thermal resilience. On the other hand, fully carbide systems exhibit intermediate behavior, highlighting that water mobility is not primarily controlled by the hydration level alone but by the coupling between lattice composition and surface chemistry. Overall, this study establishes how surface chemistry and lattice composition jointly control interfacial hydrogen bond dynamics, offering a mechanistic framework for designing transition-metal layered materials with tailored interfacial transport properties.

Hydration↗
DOE OSTI2020

Integral equation theory of thermodynamics, pair structure, and growing static length scale in metastable hard sphere and Weeks-Chandler-Andersen fluids

Here, we employ the Ornstein-Zernike integral equation theory with the Percus-Yevick (PY) and modified-Verlet (MV) closures to study the equilibrium structural and thermodynamic properties of metastable monodisperse hard sphere and continuous repulsion Weeks-Chandler-Andersen (WCA) fluids under density and temperature conditions where the system is strongly overcompressed or supercooled, respectively. The theoretical results are compared to crystal-avoiding simulations of these dense monodisperse model one-component fluids. The equation of state (EOS) and dimensionless compressibility are computed using both the virial and compressibility routes. For hard spheres, the MV-based virial route EOS and dimensionless compressibility are in very good agreement with simulation for all packing fractions, much better than the PY analogs. The corresponding MV-based predictions for the static structure factor are also very good. The amplitude of density fluctuations on the local cage scale and in the long wavelength limit, and three technically different measures of the density correlation length, are studied with both closures. All five properties grow in a roughly exponential manner with density in the metastable regime up to packing fractions of 58% with no sign of saturation. The MV-based results are in good agreement with our crystal-avoiding simulations. Interestingly, the density dependences of long and short wavelength quantities are closely related. The MV-based theory is also quite accurate for the thermodynamics and structure of supercooled monodisperse WCA fluids. Overall our findings are also relevant as critical input to microscopic theories that relate the equilibrium pair correlation function or static structure factor to dynamical constraints, barriers, and activated relaxation in glass-forming liquids.

36 MATERIALS SCIENCE↗
NASA NTRS2004

Lunar and Planetary Science XXXV: Mars Polar Science and Exploration

The session, "Mars Polar Science and Exploration" included the following reports: Evidence for Possible Exposed Water Ice Deposits in Martian Low Latitude Chasms and Chaos; Stability and Exchange of Subsurface Ice on Mars; Evaporation Rates for Liquid Water and Ice Under Current Martian Conditions; Seasonal Cycle of Carbon Dioxide and Atmospheric Circulation in Mars Southern Hemisphere as Observed by Neutron Spectroscopy; Imaging Polarimetry of Mars with Hubble Space Telescope in 2003 Opposition; GCM Simulations of Tropical Ice Accumulations: Implications for Cold-based Glaciers; Numerical Modeling of Glaciers in Martian Paleoclimates; Valley Glaciers on Mars: Calculation of Flow Rate and Thickness; Internal Structure of the Southern Polar Cap of Mars and Formation Implications; Sublimation at the Base of a Seasonal CO2 Slab on Mars; Impact Crater Abundance of the Martian South Polar Layered Deposits from THEMIS Visible Imaging; Recent Changes in South-Polar-Polygonal Terrain During One Martian Year: Implications for Subsurface Ice-Wedges; and An Historical Search for Unfrozen Water at the Phoenix Landing Site.

Source record↗
DOE OSTI2023

Virtual prototyping of liquid metal blanket performance in fusion pilot plant

Liquid metal blanket is a dominant design option for the next step fusion devices responsible for harvesting energy from fusion reaction, and simultaneously producing fuel for the same reaction through tritium breeding. Liquid metal blankets introduce additional complexity to the design due to fluid motion, fluid structure interaction, and magnetohydrodynamic (MHD) effects arising from the motion of the conducting fluid through the magnetic field. They are also directly affected by the plasma heat flux and neutronic fluence. PPPL is currently developing a virtual prototyping system for numerical analysis of the liquid metal blankets for future fusion devices. The system has a customized 3D computational fluid dynamics (CFD) code in its core, allowing MHD flow and conjugate heat transfer analysis in blankets fluids and solids. The code was successfully used before for dual coolant blanket analysis [A. Khodak et al., Fusion Eng. and Des. 137 (2018)]. Recently the same code was modified to allow verified simulation of MHD flows at high Hartmann numbers of several thousand typical for blanket applications. CFD code receives volumetric heat source distribution from the neutronic analysis based on MCNP code. In addition, direct tritium breeding simulation will be performed allowing optimization of the blanket performance. 2D axisymmetric version of neutronics code will be used for rapid optimization, with 3D version employed for detailed analysis. The surface heat distribution on the plasma facing wall will be defined by the software HEAT allowing 3D modeling of the heat flux based on the magnetic field distribution including gyro-orbit effects. Results of thermal analysis are imported into structural analysis code also included in the system. Finally, direct import of CAD geometry will be used for analyzing all components and as a result design option can be efficiently optimized.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2007

Capabilities and History of NASA Marshall Space Flight Center's Hydrogen Test Facility

The Hydrogen Test Facility (HTF) has conducted mechanical testing for aerospace materials at NASA's Marshall Space Flight Center for many years. One of the first facilities of its kind to run high-pressure cryogenic permeability tests in liquid hydrogen, HTF is now characterized as a unique national resource capable of overcoming hazardous conditions to perform tests directly in various hydrogen environments. At HTF, custom test systems are operated in eight structurally reinforced test cells from 0 to 68,948 kPa (0 to 10,000 psi) at -253 to 982 C (--423 to 1800 F) in hydrogen, air, helium, and nitrogen, with other environments available upon request. Standard mechanical procedures include compression, fatigue crack growth rate, four-point bend, high/low cycle fatigue, fracture toughness, shear, strain-to-crack, and tensile testing. Cryogenic permeability and thermal conductivity and gaseous creep testing are offered, as well as simulated service under different combinations of operating environment(s), stress, pressure, and ambient-to-extreme temperatures. Advanced tests are routinely developed upon demand, and special component testing is also available. Current efforts include the renovation of two high-pressure gaseous test cells to generate data for a J-2X engine designed for Constellation's Ares I and V vehicles. In the past, HTF has supported other critical NASA programs, such as Apollo, Space Shuttle, and Next Generation Launch Technologies. During the 1990's, hundreds of tests were conducted in liquid hydrogen and liquid nitrogen during development of the Space Shuttle's super lightweight tank, which provided the thrust required to achieve low Earth orbit for the International Space Station. This facility was designed and built in 1963. Originally called the Low Temperature Test Facility, it became known as the Cryogenic Test Facility in the late 1980's and HTF in the early 1990's.

Malone, T. W.↗
DOE OSTI2021

Simulation of polymerization induced phase separation in model thermosets

Polymerization induced phase separation (PIPS) in a three component thermoset is studied using molecular dynamics simulations of a new coarse-grained thermoset model. The system includes two crosslinker molecules, which differ in their glass transition temperatures (T g ) and chain length and thus have the potential for phase separation. Here, one crosslinker has a high T g corresponding to a rubbery behavior, and simulations were performed for a short length (4 beads) and a long length (33 beads). The resin and other crosslinker have low T g . A coarse-grained model is developed with these features and with interaction parameters determined so that for either rubbery crosslinker length, the system is in the liquid state at the cure temperature. For sufficiently slow reaction rates, the long rubbery molecule exhibits PIPS into a bicontinuous array of nanoscale domains, but the short one does not, reproducing recent experimental results. The simulations demonstrate that the reaction rates must be slow enough to allow diffusion to yield phase separation. Particularly, the reaction rate corresponding to the secondary amine must be very slow, else the structure of crosslinked clusters and the substantially increased diffusion time will prevent PIPS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗