Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Fabrication and Magnetic Characterization of CFO/NiO and CFO/NiS Heterostructures

Magnetic analysis of different magnetic bilayers and multilayers is an important step for designing next-generation multiferroic heterostructures. In this study, we have investigated the magnetic interaction at the interface in CFO/NiO hetero-structures grown by pulsed laser deposition on sapphire substrates. The thin film heterostructure samples were characterized by means of X-ray diffraction, scanning electron microscopy (SEM), energy disruptive X-ray spectroscopy (EDS), and superconducting quantum interference device (SQUID) for magnetic measurements. The XRD analysis on different samples shows the crystalline growth of the thin films. The SEM-EDS analysis provides information about structural and elemental compositions of the heterostructure films. A SQUID magnetometer was used to investigate the temperature and field-dependent magnetic properties. To better understand the magnetic properties of the thin film heterostructure samples, zero field cool (ZFC) and field cool (FC) magnetization data were analyzed. At low temperature, ferromagnetic hysteresis loop was observed. A shift in the M-H hysteresis curve was observed for the FC data from the ZFC data, which indicates the presence of exchange bias effect. In addition, we have examined the effect of antiferromagnetic NiS thin films on ferromagnetism of CFO. This study on the magnetic interaction between a ferromagnetic layer and an antiferromagnetic layer can advance the frontier for applications in spin valves, magnetic sensors, and magnetic random access memory.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Magnetic Core/Shell Nanocomposites MgFe{sub 2}O{sub 4}/SiO{sub 2} for Biomedical Application: Synthesis and Properties

Magnetic core/shell (CS) nanocomposites (MNCs) are synthesized using a simple method, in which a magnesium ferrite nanoparticle (MgFe{sub 2}O{sub 4}) is a core, and an amorphous silicon dioxide (silica SiO{sub 2}) layer is a shell. The composition, morphology, and structure of synthesized particles are studied using X-ray diffraction, field emission electron microscopy, transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), scattering electrophoretic photometer, thermogravimetric analysis (TGA), and Mössbauer spectroscopy. It is found that the MgFe{sub 2}O{sub 4}/SiO{sub 2} MNC has the core/shell structure formed by the Fe‒O–Si chemical bond. After coating with silica, the MgFe{sub 2}O{sub 4}/SiO{sub 2} MNC saturation magnetization significantly decreases in comparison with MgFe{sub 2}O{sub 4} particles without a SiO{sub 2} shell. Spherical particles agglomerated from MgFe{sub 2}O{sub 4} nanocrystallites ∼9.6 and ∼11.5 nm in size function as cores coated with SiO{sub 2} shells ∼30 and ∼50 nm thick, respectively. The total size of obtained CS MNCs is ∼200 and 300 nm, respectively. Synthesized CS MgFe{sub 2}O{sub 4}/SiO{sub 2} MNCs are very promising for biomedical applications, due to the biological compatibility of silicon dioxide, its sizes, and the fact that the Curie temperature is in the region required for hyperthermal therapy, 320 K.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1991

Magnetic field effects on microwave absorbing materials

The objective of this program was to gather information to formulate a microwave absorber that can work in the presence of strong constant direct current (DC) magnetic fields. The program was conducted in four steps. The first step was to investigate the electrical and magnetic properties of magnetic and ferrite microwave absorbers in the presence of strong magnetic fields. This included both experimental measurements and a literature survey of properties that may be applicable to finding an appropriate absorbing material. The second step was to identify those material properties that will produce desirable absorptive properties in the presence of intense magnetic fields and determine the range of magnetic field in which the absorbers remain effective. The third step was to establish ferrite absorber designs that will produce low reflection and adequate absorption in the presence of intense inhomogeneous static magnetic fields. The fourth and final step was to prepare and test samples of such magnetic microwave absorbers if such designs seem practical.

Goldberg, Ira↗
DOE OSTI2018

Exchange Coupling in MnAlC/α-Fe Nanocomposite Magnets

Nanostructured composite materials consisting of exchange-coupled hard and soft magnetic phases are proposed as alternative for the development of high-energy product permanent magnets. In this work, we have examined the effects of soft magnetic α-Fe addition on the structure and magnetic properties of powders composed of hard magnetic Mn{sub 54.3}Al{sub 44}C{sub 1.7} compound. The optimum melt-spun ribbon precursor (with τ-phase structure, with magnetization of 88 emu/g and coercive field of 1.6 kOe) was obtained after annealing the ribbons at 500 {sup ∘}C for 20 min. After the combination between the soft and the optimized hard phase, the intensity of τ-phase peaks measured by X-ray diffraction decreases. These changes can also be seen in the magnetic properties. The coercivity (∼ 500 Oe) tends to decrease with the annealing temperature, while the magnetization tends to increase up to 141 emu/g. Evidence of good exchange coupling between particles of Mn{sub 54.3}Al{sub 44}C{sub 1.7} and α-Fe, in the produced composite, was proved by the hysteresis loop and its corresponding Thamm-Hesse analysis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1972

Nuclear magnetic resonance properties of lunar samples.

Nuclear magnetic resonance spectra of Na-23, Al-27, and P-31 in fines samples 10084,60 and 14163,168 and in crystalline rock samples 12021,55 and 14321,166, have been recorded over a range of frequencies up to 20 MHz. A shift in the field at which maximum absorption occurs for all of the spectra relative to the field at which maximum absorption occurs for terrestrial analogues is attributed to a sample-dependent magnetic field at the Na, Al, and P sites opposing the laboratory field. The magnitude of these fields internal to the samples is sample dependent and varies from 5 to 10 G. These fields do not correlate with the iron content of the samples. However, the presence of single-domain particles of iron distributed throughout the plagioclase fraction that contains the principal fraction of Na and Al is inferred from electron magnetic resonance spectra shapes.

Kline, D.↗
DOE OSTI2020

Quantum Phase Engineering of Two-Dimensional Post-Transition Metals by Substrates: Toward a Room-Temperature Quantum Anomalous Hall Insulator

In this work, we propose a new strategy to engineer topological and magnetic properties of two-dimensional (2D) hexagonal lattices consisting of post-transition metals. Our first-principles calculations demonstrate that substrates serve as templates to form 2D lattices with high thermodynamic stability, where their topological properties as well as magnetic properties sensitively change as a function of lattice constants, i.e., the system undergoes a first-order phase transition from nonmagnetic to ferromagnetic state above a critical lattice constant. Consequently, substrates can be used to explore versatile magnetic, electronic, and quantum topological properties. We establish phase diagrams of versatile quantum phases in terms of exchange coupling and spin–orbit coupling effectively tuned by the lattice constants. We further reveal the first room-temperature quantum anomalous Hall (QAH) effect, i.e., Sn on 2√3 × 2√3 graphane is a QAH insulator with a large spin–orbit coupling gap of ~0.2 eV and a Curie temperature of ~380 K by using the 2D anisotropic Heisenberg model.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Magnetosynthesis Effect on the Structure and Ground State of Cu 2+ -Based Antiferromagnets

Synthetic variables can have an outsized influence on the crystal structure and magnetic properties of a material, particularly those of quantum materials. In this work, we investigate the impact of synthesis under a magnetic field (magnetosynthesis) on the crystal structure and magnetic properties of several Cu 2+ (S = 1/2)-based materials with antiferromagnetic interactions and varying levels of magnetic frustration, from simple antiferromagnets to a quantum spin liquid. Here, we develop methods to apply small (0.09–0.37 T) magnetic fields during low-temperature hydrothermal, evaporative, and rehydration syntheses of the simple antiferromagnet CuCl 2 ·2H 2 O, the canted antiferromagnet (Cu,Zn) 3 Cl 4 (OH) 2 ·2H 2 O, the frustrated and canted antiferromagnet atacamite Cu 2 (OH) 3 Cl, and the highly frustrated quantum spin liquid herbertsmithite Cu 3 Zn(OH) 6 Cl 2 . We report the first single-crystal X-ray structural determination of the Cu 3 Cl 4 (OH) 2 ·2H 2 O structure type and probe the stability of this phase both experimentally and computationally. Atacamite Cu 2 (OH) 3 Cl synthesized under a 0.19 T field experiences a 0.15 K (∼3%) decrease in its Néel transition temperature. This result suggests that magnetosynthesis with small applied fields may have a very subtle influence upon the magnetic properties of moderately magnetically frustrated 3 d materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Complex spin structure in co-trimer-chain Li 2 Co 3 Se 4 O 12

Complex magnetic materials are extremely attractive for revealing unconventional spin states and novel magnetic excitations. Here, we report the structural, thermodynamic, and magnetic properties of a novel magnetic material Li 2 Co 3 Se 4 O 12 based on x-ray and neutron diffraction, specific heat, magnetization, and x-ray photoelectron spectroscopy measurements. X-ray and neutron diffraction refinements reveal two Co sites Co (1) and Co (2) even though both are in the octahedral environment. While they are not connected along the b and c directions, these octahedra are edge-shared forming the Co (2) – Co (1) – Co (2) trimer chain along the a direction. The magnetic susceptibility exhibits the Curie-Weiss (CW) temperature dependence at high temperatures (above ∼50 K) with the negative CW temperature, a dip centered at T ⁎ ∼ 8.0 K, and an antiferromagnetic transition at T N = 3.3 K. The specific heat confirms that there is a phase transition at T N and a hump at T ⁎ . The long-range magnetic transition at T N implies that, in addition to the intra-chain interaction, there is strong inter-chain interaction, which is likely due to polarized SeO 3 bridging between chains. Single crystal neutron diffraction refinement reveals a complex magnetic structure with the angle between Co (1) and Co (2) moments ∼105°. Within the Co (2) – Co (1) – Co (2) trimer, two Co (2) moments are parallelly aligned. Surprisingly, the Co (1) moment (1.92μB) is only half of the Co (2) moment (3.96μB). There is likely the spin-state change for Co (1) from the high-spin state at T > T ⁎ to the low-spin state at T < T ⁎ , causing a dip in the magnetic susceptibility and a hump in the specific heat. When the magnetic field is applied, multiple metamagnetic transitions are found in all directions, implying field-driven magnetic excitations. Our results demonstrate rich magnetic properties of Li 2 Co 3 Se 4 O 12 that are sensitive to the external stimuli such as the magnetic field.

Antiferromagnetism↗
DOE OSTI2020

Additive Manufacturing of Isotropic NdFeB PPS Bonded Permanent Magnets

Extrusion based additive manufacturing of polymer composite magnets can increase the solid loading volume fraction with greater mechanical force through the printing nozzle as compared to traditional injection molding process. About 63 vol% of isotropic NdFeB magnet powders were compounded with 37 vol% of polyphenylene sulfide and bonded permanent magnets were fabricated while using Big Area Additive Manufacturing without any degradation in magnetic properties. The polyphenylene sulfide bonded magnets have a tensile stress of 20 MPa, almost double than that of nylon bonded permanent magnets. Additively manufactured and surface-protective-resin coated bonded magnets meet the industrial stability criterion of up to 175 °C with a flux-loss of 2.35% over 1000 h. They also exhibit better corrosion resistance behavior when exposed to acidic (pH = 1.35) solution for 24 h and also annealed at 80 °C over 100 h (at 95% relative humidity) over without coated magnets. Thus, polyphenylene sulfide bonded, additively manufactured, protective resin coated bonded permanent magnets provide better thermal, mechanical, and magnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Recycling of additively printed rare-earth bonded magnets

Here, we describe an efficient and environmentally benign method of recycling of additive printed Nd-Fe-B polymer bonded magnets. Rapid pulverization of bonded magnets into composite powder containing Nd-Fe-B particles and polymer binder was achieved by milling at cryogenic temperatures. The recycled bonded magnets fabricated by warm compaction of ground cryomilled coarse composite powders and nylon particles showed improved magnetic properties and density. Remanent magnetization and saturation magnetization increased by 4% and 6.5% respectively, due to enhanced density while coercivity and energy product were retained from the original additive printed bonded magnets. This work presents a facile method that enables the direct reuse of end-of-life bonded magnets for remaking new bonded magnets. In addition to magnetic properties, mechanical properties comparable to commercial products have been achieved. This research advances efforts to ensure sustainability in critical materials by forming close loop supply chain.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tailoring ferromagnetic resonance in bicomponent artificial spin ices

Magnonic crystals are artificial media in which magnetic properties such as saturation magnetization or relative permeability are periodically modulated in space, allowing for effective control of the magnonic bandstructure by geometrical structuring. From this end, artificial spin ice - arrays of interacting nanomagnets - can be viewed as reprogrammable twodimensional magnonic crystal. Here, we introduce a new kind of bicomponent artificial spin ice that is made of two dissimilar ferromagnetic metals arranged on complementary lattice sites. It is shown that the resonant dynamics can effectively be controlled based on the distinct magnetic properties of the two materials. We use broadband ferromagnetic resonance to measure the spin-wave eigenmodes of the different sublattices. Here, we compare the ferromagnetic resonance spectra of the single component arrays with the spectrum of a bicomponent system that can be interpreted using a superposition principle. Furthermore, we show that the switching behavior of the sublattices affects one another.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Thermal cycling induced alteration of the stacking order and spin-flip in the room temperature van der Waals magnet Fe 5 GeTe 2

The magnetic properties of the quasi-two-dimensional van der Waals magnet Fe 5–δ GeTe 2 (F5GT), which has a high ferromagnetic ordering temperature T C ~315 K, remain to be better understood. It has been demonstrated that the magnetization of F5GT is sensitive to both the Fe deficiency δ and the thermal-cycling history. Here, we investigate the structural and magnetic properties of F5GT single crystals with a minimal Fe deficiency (|δ |≤ 0.1), utilizing combined x-ray and neutron scattering techniques. Herein our study reveals that the quenched F5GT single crystals experience an irreversible, first-order transition at T S ~110 K upon first cooling, where the stacking order partly or entirely converts from ABC-stacking order to AA-stacking order. Importantly, the magnetic properties, including the magnetic moment direction and the enhanced T C after the thermal cycling, are intimately related to the alteration of the stacking order. Our work highlights the significant influence of the lattice symmetry to the magnetism in F5GT.

2-dimensional systems↗
DOE OSTI2024

Field-induced spin polarization in the lightly Cr-substituted layered antiferromagnet NiP S 3

Tuning magnetic properties in layered magnets is an important route to realize novel phenomenon related to two-dimensional (2D) magnetism. Recently, tuning antiferromagnetic (AFM) properties through substitution and intercalation techniques has been widely studied in MPX 3 compounds. Interesting phenomena, such as diverse AFM structures and even the signatures of ferrimagnetism, have been reported. However, long-range ferromagnetic (FM) ordering has remained elusive. Here, in this work, we explored the magnetic properties of the Cr-substituted NiP S 3 . We found that Cr substitution is extremely efficient in controlling spin orientation in NiP S 3 . Our study reveals a field-induced spin polarization in lightly (9%) Cr-substituted NiP S 3 , which is likely attributed to the attenuation of AFM interactions and magnetic anisotropy due to Cr doping. Our work provides a possible strategy to achieve FM phase in AFM MPX 3 , which could be useful for investigating 2D magnetism as well as potential device applications.

2-dimensional systems↗
DOE OSTI2019

Martensitic Transformation and Magnetocaloric Effect in High-Pressure Synthesized Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} Alloys

The polycrystalline Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} ferromagnetic alloy was synthesized by high-pressure method. The Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} ribbons were prepared by melt-spinning; then, the ribbons were pressed to the bulk samples under the 6-GPa high-pressure and heated to 1173 K for 30 min. The surface morphology, phase transition, and magnetocaloric effect (MCE) were investigated in the Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} bulk sample. Structural analysis and magnetic measurements studies of the bulk samples revealed the martensitic transformation at room temperature with a low thermal hysteresis of magnetization, and the nanocrystalline was observed by atomic force microscope measurements. The Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} bulk sample exhibits the directionality, and the magnetic properties have the large magnetization and low coercivity when the sample direction of the applied pressure was perpendicular to the direction of the applied magnetic field. The maximum entropy changes (∆S{sub M}) of − 4.8 J/kg K have been obtained at 330 K under the field of 30 kOe in the Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} bulk sample.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Magnetic order in nanogranular iron germanium (Fe 0.53 Ge 0.47 ) films

We study the effect of strain on the magnetic properties and magnetization configurations in nanogranular Fe x Ge 1-x films (x = 0.53 ± 0.05) with and without B20 FeGe nanocrystals surrounded by an amorphous structure. Relaxed films on amorphous silicon nitride membranes reveal a disordered skyrmion phase while films near and on top of a rigid substrate favor ferromagnetism and an anisotropic hybridization of Fe d levels and spin-polarized Ge sp band states. The weakly coupled topological states emerge at room temperature and become more abundant at cryogenic temperatures without showing indications of pinning at defects or confinement to individual grains. These results demonstrate the possibility to control magnetic exchange and topological magnetism by strain and inform magnetoelasticity-mediated voltage control of topological phases in amorphous quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Magnetic ground state and magnetic excitations in black dioptase Cu 6 Si 6 O 18

The low-temperature magnetic properties and magnetic structure of fully dehydrated black dioptase Cu 6 Si 6 O 18 have been studied by single-crystal neutron diffraction and magnetization measurements in magnetic fields up to 30 T. Here, the intrachain J c and interchain J a b interactions as well as the anisotropy of the exchange coupling J c have been determined using inelastic neutron-scattering techniques. Zero-field antiferromagnetic order at T N = 6.7 K can be described by a commensurate propagation vector of k = ( 0 , 0 , 3 / 2 ) with respect to the hexagonal R 3 ¯ :H unit cell. The Cu magnetic moments are aligned antiferromagnetically along the c axis with about 12 ° tilt and are coupled ferromagnetically between the chains. The high-field magnetization measurements provide strong evidence for the presence of a spin-flop phase above 8 T. We found that J c in black dioptase is significantly increased, while J a b is much weaker compared to its counterpart, green dioptase Cu 6 [ Si 6 O 18 ] 6 H 2 O . We suggest that black dioptase behaves like a nearly ideal S = 1 / 2 antiferromagnetic Heisenberg spiral chain with enhanced quantum fluctuations and weak spinon confinement J a b / J c ~ 0.02 .

1-dimensional spin chains↗
DOE OSTI2021

High-field spin-flop state in green dioptase

The high-field magnetic properties and magnetic order of the gem mineral green dioptase Cu 6 [Si 6 O 18 ] .6 H 2 O have been studied by means of single-crystal neutron diffraction in magnetic fields up to 21 T and magnetization measurements up to 30 T. In zero field, the Cu 2+ moments in the antiferromagnetic chains are oriented along the c axis with a small off-axis tilt. For a field applied parallel to the c axis, the magnetization shows a spin-flop-like transition at B*=12.2 T at 1.5 K. Neutron diffraction experiments show a smooth behavior in the intensities of the magnetic reflections without any change in the periodicity of the magnetic structure. Bulk and microscopic observations are well described by a model of ferromagnetically coupled antiferromagnetic X X Z spin-$\frac{1}{2}$ chains, taking into account a change of the local easy-axis direction. We demonstrate that the magnetic structure evolves smoothly from a deformed Néel state at low fields to a deformed spin-flop state in a high field via a strong crossover around B*. The results are generalized for different values of interchain coupling and spin anisotropy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Controlling magnetic exchange and anisotropy by nonmagnetic ligand substitution in layered 𝑀⁢P⁢𝑋 3 (𝑀 = Ni, Mn; 𝑋 = S, Se)

Recent discoveries in two-dimensional magnetism have intensified the investigation of van der Waals magnetic materials and further improved our ability to tune their magnetic properties. Tunable magnetism has been widely studied in antiferromagnetic metal thiophosphates 𝑀⁢P⁢𝑋 3 . Substitution of metal ions 𝑀 has been adopted as an important technique to engineer the magnetism in 𝑀⁢P⁢𝑋 3 . In this work, we have studied the previously unexplored chalcogen 𝑋 substitutions in 𝑀⁢P⁢𝑋 3 (𝑀 = Mn/Ni; 𝑋 = S/Se). We synthesized the single crystals of MnP⁢S 3−𝑥 ⁢Se 𝑥 (0 ≤ 𝑥 ≤ 3) and NiP⁢S 3−𝑥 ⁢Se 𝑥 (0 ≤ 𝑥 ≤ 1.3) and investigated the systematic evolution of the magnetism with varying 𝑥. Our study reveals the effective tuning of magnetic interactions and anisotropies in both MnPS 3 and NiPS 3 upon Se substitution. Such efficient engineering of the magnetism provides a suitable platform to understand the low-dimensional magnetism and develop future magnetic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗