Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mathematical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Shaded computer graphic techniques for visualizing and interpreting analytic fluid flow models

Mathematical models which predict the behavior of fluid flow in different experiments are simulated using digital computers. The simulations predict values of parameters of the fluid flow (pressure, temperature and velocity vector) at many points in the fluid. Visualization of the spatial variation in the value of these parameters is important to comprehend and check the data generated, to identify the regions of interest in the flow, and for effectively communicating information about the flow to others. The state of the art imaging techniques developed in the field of three dimensional shaded computer graphics is applied to visualization of fluid flow. Use of an imaging technique known as 'SCAN' for visualizing fluid flow, is studied and the results are presented.

Parke, F. I.↗

The NASA/industry Design Analysis Methods for Vibrations (DAMVIBS) program: Boeing Helicopters airframe finite element modeling

Mathematical models based on the finite element method of structural analysis, as embodied in the NASTRAN computer code, are routinely used by the helicopter industry to calculate airframe static internal loads used for sizing structural members. Historically, less reliance has been placed on the vibration predictions based on these models. Beginning in the early 1980's NASA's Langley Research Center initiated an industry wide program with the objective of engendering the needed trust in vibration predictions using these models and establishing a body of modeling guides which would enable confident future prediction of airframe vibration as part of the regular design process. Emphasis in this paper is placed on the successful modeling of the Army/Boeing CH-47D which showed reasonable correlation with test data. A principal finding indicates that improved dynamic analysis requires greater attention to detail and perhaps a finer mesh, especially the mass distribution, than the usual stress model. Post program modeling efforts show improved correlation placing key modal frequencies in the b/rev range with 4 percent of the test frequencies.

Gabel, R.↗

System Identification of a DC-DC Buck Converter Based on Two-Channel Relay Method

This work presents a system identification approach based on a two-channel relay applied to a DC-DC buck converter operating in closed-loop with a PI controller to regulate its output voltage. The implemented two-relay method allows system identification while the system is running online. Moreover, the algorithm works in a closed-loop configuration while introducing a minimal perturbation in the converter's operation. The presented algorithm was used to identify the frequency response of the converter with no-prior knowledge about the system structure. Furthermore, the identified transfer function parameters has a good agreement with the mathematical model of the converter. Simulation results of the comparison between the switching model, mathematical model and the identified model are provided to validate the theoretical analysis.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Laying a Foundation for Performance Assessment (PA) Model Development - 19267

Performance Assessment (PA) models are abstractions of real-world conditions. As abstractions, modelers must make a number of decisions regarding model complexity and which features, events, and processes (FEPs) will be represented. To ensure that such decisions are transparent to stakeholders, modelers should document their approach and how this approach influences conceptual model development. This paper describes one such approach. Examples are used to describe an analysis of the potential FEPs. Through the FEPs analysis, all potentially relevant FEPs can be identified. These potentially relevant FEPs are then used to develop a detailed conceptual model known as the Central Scenario, which includes a description of the assessment context, the key features of the site and the closure system, and the expected processes of the system. From this Central Scenario conceptual model, mathematical models can be developed and implemented within modeling software and used to demonstrate compliance to PA performance objectives. FEPs which are beyond the scope of the Central Scenario are identified and used as the basis for developing alternative conceptual models (ACMs) or sensitivity analyses. Once these models and modeling cases are defined, the necessary inputs can be identified and defined. (author)

97 MATHEMATICS AND COMPUTING↗

MEMS 3-DoF gyroscope design, modeling and simulation through equivalent circuit lumped parameter model

Pre-fabrication, behavioural and performance analysis with computer aided design (CAD) tools is a common and fabrication cost effective practice. In light of this we present a simulation methodology for a dual-mass oscillator based 3 Degree of Freedom (3-DoF) MEMS gyroscope. 3-DoF Gyroscope is modeled through lumped parameter models using equivalent circuit elements. These equivalent circuits consist of elementary components which are counterpart of their respective mechanical components, used to design and fabricate 3-DoF MEMS gyroscope. Complete designing of equivalent circuit model, mathematical modeling and simulation are being presented in this paper. Behaviors of the equivalent lumped models derived for the proposed device design are simulated in MEMSPRO T-SPICE software. Simulations are carried out with the design specifications following design rules of the MetalMUMPS fabrication process. Drive mass resonant frequencies simulated by this technique are 1.59 kHz and 2.05 kHz respectively, which are close to the resonant frequencies found by the analytical formulation of the gyroscope. The lumped equivalent circuit modeling technique proved to be a time efficient modeling technique for the analysis of complex MEMS devices like 3-DoF gyroscopes. The technique proves to be an alternative approach to the complex and time consuming couple field analysis Finite Element Analysis (FEA) previously used.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the Ill-Posed Nature of Inverse Problems: An Exactly Solvable Paradigm Inverse Neutron Diffusion Problem Illustrating the Solution's Non-Computability - Paper 48

In general, a physical system and/or the result of an indirect experimental measurement are modeled mathematically in terms of: (a) A system of linear and/or nonlinear equations that relate the system's independent variables and parameters to the system's state (i.e., dependent) variables; (b) Probability distributions, moments thereof, inequality and/or equality constraints that define the range of variations of the system's parameters; (c) One or several quantities, customarily referred to as system responses (or objective functions, or indices of performance), which are computed using the mathematical model. The 'direct problem' solves the 'parameter-to-output' mapping that describes the 'cause-to-effect' relationship in the respective physical process. In practice, the model parameters and/or responses are experimentally measured quantities and are therefore subject to uncertainties. Many measurement problems are 'inverse' to the direct problem in that they seek to determine the properties of the medium (i.e., various cross sections), or the properties of the source, and/or the size of the medium on its boundaries from measurements of quantities that depend on the neutron flux (or from direct measurements of the neutron flux). In general, two problems are called inverses of one another if the formulation of each involves all or part of the solution of the other. Some authors further group such inverse problems into 'invasive', when the interior flux is accessible for measurements as opposed to 'non-invasive', in which only fluxes on the boundary of (or exterior to) the medium can be measured. Examples of inverse radiative transfer problems have been reviewed by McCormick, while examples of inverse source problems for neutron transport have been provided by Sanchez and McCormick. More recently, Bledsoe et al., have presented two methods (the Levenberg-Marquard, and 'differential evolution method') for addressing numerically inverse transport problems. However, although these works (as well as other works cited therein) mentioned the detrimental effects of 'small perturbations in the input data', none of the works published thus far on inverse problems for particle transport or diffusion actually showed explicitly the effects that uncertainties in the measured responses (e.g., detector measurements) would actually have on the 'inverse' deduction (from such measurements) of the underlying medium's properties, sources, etc. This work highlights explicitly the nature of the difficulties encountered in so-called 'inverse problems' by presenting a paradigm inverse neutron diffusion problem admitting an exact solution, in which the 'inverse problem' is to determine the medium's diffusion coefficient from flux measurements. It will be shown explicitly (analytically) that this is not possible to achieve in a unique manner, even in the absence of measurement uncertainties, unless additional error-free information is provided about the quantity to be determined (in this case, the medium's diffusion coefficient). It if further shown that, even if this additional error-free information about the diffusion coefficient to be determined is available, the unavoidable experimental measurements errors, albeit it vanishingly small, in the measured flux render the 'exact solution' useless for computational purposes, since the exact solution turns out to be a divergent series. As discussed in this paper's ENDNOTES section, the paradigm problem presented in this work also underscores the need for 'regularization', which is a qualifier indicating that the inverse problem is to be solved in some approximate manner. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Anomalous scattering, transport, and spatial distribution of X-ray fluorescence at the exit of polycapillary structures

The angular distribution of the X-ray intensity at the exit of microchannel plates at grazing incidence of monochromatic radiation on the walls of microcapillaries has been investigated. The angles and energies of the primary radiation quanta at which the synchrotron beam excites X-ray fluorescence propagating inside polycapillary structures have been determined. The angular dependences of the intensity distribution of X-rays transmitted through the microcapillaries have been studied theoretically and experimentally for energies corresponding to the region of anomalous dispersion near the L{sub 2,3} absorption edges of silicon. The propagation of waves in hollow polycapillary waveguides, the excitation of X-ray fluorescence, and the X-ray diffraction at the exit of microchannel plates have been modeled mathematically. The mathematical model takes into account the presence of a transition layer on the microchannel surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Decay Heat Quantification in the High Temperature Test Reactor

The proper calculation of decay heat is necessary for both postulated accidents as well as normal spent fuel repository safety analysis. Since the 1970s, the nuclear industry has primarily relied on the use of the ANSI/ANS-5.1 standard or one of it’s predecessors as the tool for calculating such heat. However, different reactor systems can have substantially different materials, neutron spectrums, operating characteristics, etc.…that lead to vastly different isotopic compositions in the fuel over time. The ANSI/ANS-5.1 standard is specific to Light Water Reactors, and thus may not be well suited for other systems such as high temperature gas reactors. Recent developments in the SCALE 6 code developed at Oak Ridge National Laboratory have allowed for a more accurate treatment of the complexity associated with high temperature reactor TRISO fuel. Also, the standalone isotopic depletion and generation code ORIGEN-S, a module of SCALE, has been validated against experimental data for LWRs for properly characterizing decay heat. And most recently, Japan Atomic Energy Agency has used the ORIGEN code to generate HTGR cross section libraries to be used to quantify the decay heat generated in the High Temperature Engineering Test Reactor at the Oarai Research and Development Center. Given the Idaho National Laboratory’s continued research into the viability of HTGRs as a next generation power reactor, an independent decay heat quantification analysis has been performed for a variety of fuel enrichments, TRISO particle packing fractions, and fuel temperatures using a similar approach. Furthermore, these data are then used as input into the RAVEN code developed at INL. A Reduced Order Model mathematical model in RAVEN is ‘trained’ to create a response mechanism to the various input parameters. Preliminary results demonstrate the potential for using this methodology to accurately predict decay heat generation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Local-Area-Network Simulator

Local Area Network Extensible Simulator (LANES) computer program provides method for simulating performance of high-speed local-area-network (LAN) technology. Developed as design and analysis software tool for networking computers on board proposed Space Station. Load, network, link, and physical layers of layered network architecture all modeled. Mathematically models according to different lower-layer protocols: Fiber Distributed Data Interface (FDDI) and Star*Bus. Written in FORTRAN 77.

Gibson, Jim↗

Sensitivity Analysis Method to Address User Disparities in the Analytic Hierarchy Process

Decision makers often face complex problems, which can seldom be addressed well without the use of structured analytical models. Mathematical models have been developed to streamline and facilitate decision making activities, and among these, the Analytic Hierarchy Process (AHP) constitutes one of the most utilized multi-criteria decision analysis methods. While AHP has been thoroughly researched and applied, the method still shows limitations in terms of addressing user profile disparities. A novel sensitivity analysis method based on local partial derivatives is presented here to address these limitations. This new methodology informs AHP users of which pairwise comparisons most impact the derived weights and the ranking of alternatives. The method can also be applied to decision processes that require the aggregation of results obtained by several users, as it highlights which individuals most critically impact the aggregated group results while also enabling to focus on inputs that drive the final ordering of alternatives. An aerospace design and engineering example that requires group decision making is presented to demonstrate and validate the proposed methodology.

Marie Ivanco↗

Stochastic robust mathematical programming model for power system optimization

We present a stochastic robust framework for two-stage power system optimization problems with uncertainty. The model optimizes the probabilistic expectation of different worst-case scenarios with different uncertainty sets. In addition, a case study of unit commitment shows the effectiveness of the proposed model and algorithms.

97 MATHEMATICS AND COMPUTING↗

Integrated Process Optimization for Biochemical Conversion

This research is motivated by the challenges faced during biomass processing in bioenergy plants. It has been observed that variations in biomass characteristics, such as moisture, ash, and carbohydrate contents cause variations in feeding of the system which led to underutilization of equipment and the reactor. The objective of this research is to ensure a continuous flow of biomass to the reactor in plants that use the biochemical conversion process to generate liquid fuels. The overall goal is to lower the cost of producing biofuels, which could lead to improving US’s energy independency and growing US’s rural economy. The research team developed analytical models, such as discrete element method (DEM) models and mathematical models. The DEM models are unit-level models that explicitly capture biomass characteristics and quantify the impacts of biomass characteristics on bulk material properties and the performance of specific equipment. The mathematical models are system-level models that capture the impacts of system infeed rate, equipment processing rate, storage location and capacity, and biomass characteristics on system throughput. The functional relations predicting the bulk material properties from DEM models are incorporated to the mathematical models. The models developed were validated and evaluated using data collected at Idaho National Laboratory’s biomass processing facility. Via these models, we identified process control strategies that ensure a continuous flow of biomass to the reactor, while meeting the requirements of biochemical conversion process. Our analysis indicates that sequencing of biomass bales based on moisture level, and carbohydrate contents could have a positive impact on reducing processing time and inventory level and increasing throughput rate. Short bale sequences that repeat frequently, seem to have the greatest impact on improving system’s performance. Based on our experiments, the total annual system operating costs reduced by 20-30%, and the maximum inventory level reduced by 3 to 4 times. The operating costs include the annual equipment amortization cost and processing cost. The implementation of the models developed requires the use of standardized bale format, Radio Frequency Identification technology, sensing and real time monitoring of material attributes, automated material handling equipment, and automated process control. The scope of the model proposed can be extended to include the whole supply chain. The supply chain models help identify how many bales of different biomass feedstock to purchase given biomass availability in the region, biomass price and quality, and the biomass processing capabilities of the biorefinery. Thus, the outcomes of supply chain models can be used to inform the design of long-term contracts among farmers and the biorefinery.

09 BIOMASS FUELS↗

An analytically linearized helicopter model with improved modeling accuracy

An analytically linearized model for helicopter flight response including rotor blade dynamics and dynamic inflow, that was recently developed, was studied with the objective of increasing the understanding, the ease of use, and the accuracy of the model. The mathematical model is described along with a description of the UH-60A Black Hawk helicopter and flight test used to validate the model. To aid in utilization of the model for sensitivity analysis, a new, faster, and more efficient implementation of the model was developed. It is shown that several errors in the mathematical modeling of the system caused a reduction in accuracy. These errors in rotor force resolution, trim force and moment calculation, and rotor inertia terms were corrected along with improvements to the programming style and documentation. Use of a trim input file to drive the model is examined. Trim file errors in blade twist, control input phase angle, coning and lag angles, main and tail rotor pitch, and uniform induced velocity, were corrected. Finally, through direct comparison of the original and corrected model responses to flight test data, the effect of the corrections on overall model output is shown.

Jensen, Patrick T.↗

Analysis of ground reflection of jet noise obtained with various microphone arrays over an asphalt surface

Ground reflection effects on the propagation of jet noise over an asphalt surface are discussed for data obtained using a 33.02-cm diameter nozzle with microphones at several heights and distances from the nozzle axis. Ground reflection effects are analyzed using the concept of a reflected signal transfer function which represents the influence of both the reflecting surface and the atmosphere on the propagation of the reflected signal in a mathematical model. The mathematical model used as a basis for the computer program was successful in significantly reducing the ground reflection effects. The range of values of the single complex number used to define the reflected signal transfer function was larger than expected when determined only by the asphalt surface. This may indicate that the atmosphere is affecting the propagation of the reflected signal more than the asphalt surface. The selective placement of the reinforcements and cancellations in the design of an experiment to minimize ground reflection effects is also discussed.

Miles, J. H.↗

Analysis of ground reflection of jet noise obtained with various microphone arrays over an asphalt surface

Ground reflection effects on the propagation of jet noise over an asphalt surface are discussed for data obtained using a 33.02 cm (13-in.) diameter nozzle with microphones at several heights and distances from the nozzle axis. Analysis of ground reflection effects is accomplished using the concept of a reflected signal transfer function which represents the influence of both the reflecting surface and the atmosphere on the propagation of the reflected signal in a mathematical model. The mathematical model used as a basis for the computer program was successful in significantly reducing the ground reflection effects. The range of values of the single complex number used to define the reflected signal transfer function was larger than expected when determined only by the asphalt surface. This may indicate that the atmosphere is affecting the propagation of the reflected signal more than the asphalt surface. Also discussed is the selective placement of the reinforcements and cancellations in the design of an experiment to minimize ground reflection effects.

Miles, J. H.↗