Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHENOL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The effect of moisture on hydrocarbon-based solvent liquefaction of pine, cellulose and lignin

In this report we examined the effect of moisture on the solvent liquefaction of loblolly pine, cellulose, and lignin in tetralin at 280 °C and pressures ranging from 15 to 70 bar. Solvent liquefaction experiments were conducted in a quasi-batch reactor capable of continuous pressure control and external vapor condensation. Moisture was varied by the controlled addition of de-ionized water. Control over the system pressure subsequently impacted the removal of water vapor from the reactor. Liquid yield decreased by 25, 21, and 35 wt%, for pine, cellulose, and lignin, respectively, when moisture content was increased from 1 to 50 wt% at 42 bar. Humins were observed in the solid residue from liquefaction of wet cellulose. Wet lignin yielded a substantial amount of solid residue compared to dry lignin with a corresponding decrease in total phenolic monomer production. It was concluded that the ionic dissociation of water was an important factor in loss of liquid yield in the presence of water. Although water was less than 20 wt% of the solvent loading in these experiments, it strongly influenced the liquefaction of biomass and biomass components.

09 BIOMASS FUELS↗
DOE OSTI2022

Product specific thermal degradation kinetics of bisphenol F epoxy in inert and oxidative atmospheres using evolved gas analysis–mass spectrometry

Knowledge of the degradation kinetics for polymer materials is important for understanding thermal stability. In this study, evolved gas analysis–mass spectrometry and pyrolysis gas-chromatography-mass spectrometry were evaluated for the potential to deliver additional insight into thermal degradation kinetics of diglycidal ether of bisphenol F (DGEBF) epoxy thermoset under inert and oxidative atmospheres. Degradation products of selected precursor ions were evaluated for their uniqueness to the specific precursor using extracted ion thermographs. Unique mass peaks, solely attributed to a single reaction pathway of a specific product, were determined from extracted ion thermographs and used to determine both activation energy (E a ) and pre-exponential factors for the specific primary reaction pathways. These primary reaction pathways for DGEBF epoxy degradation were then evaluated in the context of transition state theory (TST) and related transition state enthalpies (ΔH ‡ ) and entropies (ΔS ‡ ) of activation to further elucidate the degradation process. It was determined under pyrolysis conditions, as suggested by the E a , the formation of bisphenol F monomer was the rate-limiting step toward the formation of xanthene and phenol. In contrast, under thermo-oxidative conditions, reactions involving oxygen containing species were identified as the rate-limiting step for all observed products based on the large negative ΔS ‡ calculated from TST. This work demonstrates a powerful combination of technique and theory that can provide new insight into the degradation of polymer materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Recovery of value-added compounds through fast pyrolysis of apple pomace hydrochar

The environmental challenges associated with food production can be addressed via the thermochemical upcycling of agro-industrial biomass. Two such methods, hydrothermal carbonization (HTC) and pyrolysis, can be coupled to first reduce the water content of wet biomass wastes by producing a hydrochar (HC) via HTC and then a bio-oil via pyrolysis of the HC. However, HTC of biomass results in the formation of secondary char (SC), an amorphous tar-like mixture resulting from organic compounds released into the aqueous phase that adsorb, recondense and polymerize on the parent biomass. This study investigated how HTC temperature impacts the formation of SC from apple pomace and the SC’s subsequent impact on fast pyrolysis products. HCs were produced at temperatures of 175°C, 200°C, and 250°C. Lower HTC temperatures favor the formation of biorefinery platform chemicals such as 5-hydroxymethylfurfural and levulinic acid, while higher temperatures result in increased lignin degradation products (i.e., phenolics). HCs were subjected to fast pyrolysis before and after SC extraction in two analytical pyrolysis instruments. Fast pyrolysis of HC produced compounds similar to those found in SC, but with variations in CO and CO 2 emissions. In conclusion, the combination of SC extraction and fast pyrolysis demonstrates promise for recovering value-added compounds from agro-industrial waste biomass while retaining a solid char for fuel and carbon management.

09 BIOMASS FUELS↗
DOE OSTI2025

Co-depolymerization of lignin and plastic waste using hydrothermal liquefaction process

Sustainable valorization of underutilized lignin and plastic waste beyond incineration is critical for producing renewable fuels. Hydrothermal liquefaction (HTL) provides a promising approach to convert wet lignin and plastics into high-quality oils without the need for prior drying of wet lignin. Here, this study examines the effects of temperature (300–400 °C), residence time, and polymer molecular weight on product yield and composition during HTL of polyethylene (PE), polypropylene (PP), and lignin under subcritical and supercritical water conditions. For PE, oil yields increased with temperature, with low molecular weight (LMW) PE achieving a maximum of ∼93 % at 400 °C for 30 min, while high molecular weight (HMW) PE reached ∼86 % at 400 °C for 1 h. Lignin and PP exhibited optimal oil yields at intermediate temperatures, decreasing at higher temperatures due to secondary reactions and char formation. Lignin yielded a maximum of ∼22 % oil at 300 °C for 30 min, LMW PP ∼88 % at 375 °C for 1 h, and HMW PP ∼83 % at 400 °C for 1 h. GC–MS analysis revealed that lignin oils were rich in phenols and alkylphenols, while PE and PP oils were dominated by paraffins and olefins. Oxygenated compounds in PE decreased at higher temperatures, improving oil quality. Co-liquefaction of lignin with plastics enhanced oil yields and energy content under specific conditions, demonstrating synergistic effects dependent on plastic type, molecular weight, and HTL conditions. These findings highlight the potential of HTL to produce high-energy, value-added fuels from lignin–plastic mixtures.

09 - BIOMASS FUELS↗
DOE OSTI2022

Corrosion-resistant polyurethane coatings from structure-homogenized biorefinery lignin through fractionation and oxypropylation

Using lignin for polyurethane (PU) synthesis is challenging because of its heterogeneous structure, i.e., broad molecule weight (MW) distribution and diverse hydroxyl (OH) functionality. This complexity influences the crosslinking reaction between lignin and isocyanate and affects the quality of PU products. Here, we propose a two-step strategy for lignin structure homogenization by lowering its MW and uniforming OH functionality (step 2). Step 1 involves a bioethanol fractionation process, yielding fractionated lignin with one order lower MW than the raw lignin while exhibiting better processability for the subsequent process. Step 2 is performed by an oxyalkylation process using fractionated lignin that converts phenolic and carboxylic OHs to aliphatic OHs. As a result, we obtained structure-homogenized lignin with good compatibility and crosslinking with hexamethylene diisocyanate for PU coating synthesis. Moreover, PU coatings prepared from structure-homogenized lignin display a defect-free microscopic structure and show better corrosion resistance than coatings fabricated from its raw lignin alternative. Overall, the structure homogenization process is a beneficial way of using lignin as biopolyol in PU synthesis toward the application-oriented design of corrosion-resistant lignin-based PU coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Catalytic consequences of hydrogen addition events and solvent-adsorbate interactions during guaiacol-H 2 reactions at the H 2 O-Ru(0 0 0 1) interface

Catalytic reactions of biomass-derived phenolics and H 2 occur on transition metal surfaces via competitive C–O cleavage and ring saturation pathways, with both requiring multiple hydrogen addition events before forming their respective rate limiting transition states. These events are markedly affected by solvent chemical identity, with polar protic solvents ionizing hydrogen adatoms (H*) to interfacial protons (H + ) and opening up new catalytic routes. Here, we establish the reaction coordinate space for guaiacol-H 2 reactions on Ru(0 0 0 1) using density functional theory and describe the atomic-scale effect of a polar protic solvent, H 2 O. Coupled H + and H* attack leads to quasi-equilibrated enol and keto intermediates as the precursors for C–O cleavage and ring saturation, respectively. For C–O cleavage, H 2 O solvent enables a lower energy pathway via concomitant transfer of the hydroxyl H + to the methoxy oxygen during C–OCH 3 cleavage, forming a charge separated [Ru(s)–(C 6 H 5 O – )…(H + )…OCH 3 ] transition state and reducing the barrier by up to 0.8 eV as compared to unassisted C–OCH 3 cleavage. For ring saturation, H* attack onto an unsaturated meta carbon is rate limiting with no direct solvent participation, suggesting that protic polar solvents selectively promote the C–O cleavage pathway. Taken together, we show that activating guaiacol for either C–O bond cleavage or ring saturation product formation depends on the reactive hydrogen identity (H* or H + ), enol/keto isomerization equilibrium, and accessibility of the proton assisted Car–OCH 3 cleavage transition state. Here, all such factors are tunable via changes to the solvent or metal identity.

09 BIOMASS FUELS↗
DOE OSTI2019

Converting polycarbonate and polystyrene plastic wastes intoaromatic hydrocarbons via catalytic fast co-pyrolysis

Thermochemical conversion of plastic wastes is a promising approach to produce alternative energy-based fuels. Herein, we conducted catalytic fast co-pyrolysis of polycarbonate (PC) and polystyrene (PS) to generate aromatic hydrocarbons using HZSM-5 (Zeolite Socony Mobil-5, hydrogen, Aluminosilicate) as a catalyst. The results indicated that employing HZSM-5 in the catalytic conversion of PC facilitated the synthesis of aromatic hydrocarbons in comparison to the non-catalytic run. A competitive reaction between aromatic hydrocarbons and aromatic oxygenates was observed within the studied temperature region, and catalytic degradation temperature of 700 °C maximized the competing reaction towards the formation of targeted aromatic hydrocarbons at the expense of phenolic products. Catalyst type also played a vital role in the catalytic decomposition of PC wastes, and HZSM-5 with different Si/Al molar ratios produced more aromatic hydrocarbons than HY (Zeolite Y, hydrogen, Faujasite). Regarding the effect of Si/Al molar ration in HZSM-5 on the distribution of monocyclic aromatic hydrocarbons (MAHs), a Si/Al molar ratio of 38 maximized benzene formation with an advanced factor of 5.1. Catalytic fast co-pyrolysis of PC with hydrogen-rich plastic wastes including polypropylene (PP), polyethylene (PE), and polystyrene (PS) favored the production of MAHs, and PS was the most effective hydrogen donor with a ~2.5-fold increase. The additive effect of MAHs increased at first and then decreased when the PC percentage was elevated from 30 % to 90 %, achieving the maximum value of 32.4 % at 70 % PC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Determination of preferential binder oxidation in HTGR matrix material subjected to high temperature steam

Graphitic matrix material encapsulates tristructural isotropic (TRISO) coated fuel particles and is a structural component for both pebble and cylindrical fuel compacts in high temperature gas reactor (HTGR) designs. In an off-normal event involving steam exposure, the matrix material is exposed to oxidants, leading to degradation of the fuel compact and subsequent exposure of the TRISO particle fuel to oxidizing species. This study presents microstructural characterization of matrix material after exposure to high temperature (1200°C), 48 kPa steam in which the evolved microstructure demonstrated nonuniform degradation. Subsequent Raman spectroscopy determined the nature of the remaining material post-exposure. Finally, the electron microscopy characterization suggests and Raman spectroscopic analysis confirms, under off-normal conditions, the carbonized phenolic resin binder is preferentially oxidized ahead of the graphite flake filler and is responsible for the nonuniform degradation and enhanced depth of attack.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-throughput screening of multifunctional nanocoatings based on combinations of polyphenols and catecholamines

Biomimetic surface coatings based on plant polyphenols and catecholamines have been used broadly in a variety of applications. However, the lack of a rational cost-effective platform for screening these coatings and their properties limits the true potential of these functional materials to be unleashed. Here, we investigated the oxidation behavior and coating formation ability of a library consisting of 45 phenolic compounds and catecholamines. UV–vis spectroscopy demonstrated significant acceleration of oxidation and polymerization under UV irradiation. We discovered that several binary mixtures resulted in non-additive behavior (synergistic or antagonistic effect) yielding much thicker or thinner coatings than individual compounds measured by ellipsometry. To investigate the properties of coatings derived from new combinations, we used a miniaturized high-throughput strategy to screen 2,532 spots coated with single, binary, and ternary combinations of coating precursors in one run. We evaluated the use of machine learning models to learn the relation between the chemical structure of the precursors and the thickness of the nanocoatings. Formation and stability of nanocoatings were investigated in a high-throughput manner via discontinuous dewetting. 30 stable combinations (hits) were used to tune the surface wettability and to form water droplet microarray and spot size gradients of water droplets on the coated surface. No toxicity was observed against eukaryotic HeLa cells and Pseudomonas aeruginosa (strain PA30) bacteria after 24 h incubation at 37 C. The strategy introduced here for high-throughput screening of nanocoatings derived from combinations of coating precursors enables the discovery of new functional materials for various applications in science and technology in a cost-effective miniaturized manner.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Synthesis and Characterization of Lignin-grafted-poly(ε-caprolactone) from Different Biomass Sources

Modification of lignin with poly(ε-caprolactone) is a promising approach to valorize industrial low-value lignins and to advance the bioeconomy. We have synthesized lignin grafted poly(ε-caprolactone) (lignin-g-PCL) copolymers via ring-opening polymerization of ε-caprolactone with different types of lignins of varying botanical sources (G-type pine lignin, S/G-type poplar lignin, and C-type Vanilla seeds lignin) and lignin extraction methods (Kraft and ethanol organosolv pulping). The lignin-g-PCL copolymer showed remarkably improved compatibility and dispersion in acetone, chloroform, and toluene in comparison to non-modified lignins. The structure and thermal properties of the lignin-g-PCL were investigated using Fourier-transform infrared spectroscopy (FTIR), 31 P nuclear magnetic resonance (NMR), 2D heteronuclear single quantum correlation (HSQC) NMR, gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). Furthermore, we have found that all the technical lignins were reactive to the copolymerization reaction regardless of their plant source and isolation methods. The molecular weights of the synthesized lignin-g-PCL copolymers were positively correlated with the content of aliphatic lignin hydroxyls, suggesting that the copolymerization reaction tends to occur preferentially at the aliphatic hydroxyls rather than the phenolic hydroxyls of lignin. Thermal analyses of the lignin-g-PCL copolymers were studied, and in general, a reduction of melting temperature and crystallinity percentage in comparison to the neat PCL was observed. However, the thermal behavior of lignin-g-PCL copolymers varied depending on the lignin feedstocks employed in the copolymerization reaction.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Elucidating the Chemical Pathways Responsible for the Sooting Tendency of 1 and 2-phenylethanol

Yield Sooting Index (YSI) measurements have shown that oxygenated aromatic compounds (OACs) tend to have lower YSI than aromatic hydrocarbon (AHC) compounds. For example, typical AHCs such as toluene and ethyl benzene have a YSI of 170 and 216, respectively, in contrast, OACs such as phenol and anisole have a YSI of 81 and 111, respectively. However, this trend is not always true as was observed for the structural isomers 1-phenylethanol (1PE, YSI=142) and 2-phenylethanol (2PE, YSI=207), where 2PE contains a YSI more representative of AHCs than OACs. We applied flow reactor experiments and density functional theory (DFT) calculations to examine how oxygen functionality present in 1PE and 2PE alters the reaction pathways leading to the observed difference in soot formation. It was determined that the proximity of the oxygen functional group to the aromatic ring determines whether the oxygen remains attached to the primary reacting species (for 1PE) or is eliminated early in the combustion sequence (for 2PE). For these alcohols, preservation of the oxygen in the molecule leads to further OACs, while loss of the oxygen leads to AHCs and benzyl radical. The direct pathways to AHCs and benzyl radical result in the higher YSI observed for 2PE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Investigation of structural effects of aromatic compounds on sooting tendency with mechanistic insight into ethylphenol isomers

Small aromatic molecules with oxygen-containing functional groups are a promising class of fuel additives, as they can be readily sourced from depolymerized lignin. These oxygenated aromatic compounds (OACs) show a lower sooting tendency than aromatic hydrocarbons, but OACs having alkyl groups such as ethylphenol show a higher sooting tendency than other OACs such as phenol and anisole, despite the oxygen moiety. In this study, we investigate the relationship between chemical structure and soot precursor formation to explain observed differences in the sooting tendency of OACs and to gain insight into how alkyl or oxygenated substituents on the aromatic ring affect soot precursor formation. The weakest bond for 15 aromatic compounds was identified and cleavage of these bonds was shown to generate either benzyl or phenoxy radicals. A linear relationship between standard enthalpy of formation (ΔH f o ) of these radicals and the yield sooting index (YSI) was found, and thus ΔH f ° can be applied as a metric to estimate YSIs of various aromatic compounds; higher ΔH f o of a radical indicates an increase in the radical reactivity and leads to more soot precursor formation. Flow reactor experiments were performed for 2-ethylphenol and 3-ethylphenol to elucidate how ortho and meta substitution effects the sooting tendency. Soot precursors were identified from the experiment and their formation pathways were investigated computationally. 2-ethylphenol produces more oxygenated products than 3-ethylphenol since the ortho position has increased resonance stabilization of radical intermediates, which leads to lower YSI. Overall, these results further inform the selection of potential biomass-derived fuel blendstocks that have favorable sooting tendencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Green chemistry design in polymers derived from lignin: review and perspective

The use of lignin for material and chemical applications has gained interest in recent times due to the environmental focus on using biomass for renewable materials as well as the motivation to valorize lignin as part of an integrated biorefinery. While a wealth of publications can be found for lignin-derived materials, and several reviews can be found on the topic, there are no reviews that outline and critically assess the sustainability of these protocols based on the criterion of the 12 Principles of Green Chemistry. This review assesses the literature for lignin- derived polymers over the past 20 years and highlights attempts to use biobased accompanying reagents, green solvents or solvent-less protocols, reports that replace traditionally toxic precursors (e.g. diisocyanates for polyurethanes), use mild conditions, valorize additional waste streams and prepare materials particularly biodegradable or recyclable. Here, the following work is a comprehensive and critical assessment of the green and sustainable nature of the state-of-the art of lignin-derived polymers (polyurethane, polyester, epoxy, phenolic resin, and others) utilizing actual biomass in the synthetic protocol. Each section of this review highlights and assesses published protocols that use a particularly green approach in one or more steps of the synthetic sequence. While many reports still contain traditional petroleum-derived and toxic methods along with more sustainable methods, the outline of all such green methods is able to create a landscape amidst lignin-derived polymer synthesis that points the way toward safer and more environmentally friendly materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Black carbon enriches short-range-order ferrihydrite in Amazonian Dark Earth: Interplay mechanism and environmental implications

Our study underpins the mechanism of organo-mineral interaction between black carbon (BC, biochar) and associated minerals in the historical BC-rich Amazonian Dark Earth (ADE) by using synchrotron-based microscopic (TXM), microspectroscopic (μFTIR) and spectroscopic (XAS and μ-diffraction) approaches. The BC-rich ADE contained over 100% more poorly crystalline minerals than the adjacent tropical soil. Linear combination fitting of k-spacing in the X-ray Absorption Spectra (XAS) revealed that ferrihydrite contributed to 81.1% of the Fe-minerals in BC. A small but distinct peak was observed at 5.7 Å –1 in the extended X-ray absorption fine structure k oscillation of BC, revealing the presence of Fe—C (including Fe-O-C) covalent bonds. No Fe—C path was yielded by the XAS fitting when an obvious peak downshift of the first (Fe—Fe 1 ) shell was observed, suggesting that the availability of inner-sphere Fe—C complexation was limited to the BC surface and interphase region. In this study, the main minerals for organo-mineral complexation were short-range-order (SRO) ferrihydrite on BC instead of corner-sharing FeO 6 octahedra. Compared to ADE, the coordination number of the first (Fe—Fe 1 ) and second (Fe—Fe 2 ) shell was higher in BC, revealing a higher degree of order in coordination between the neighboring Fe mineral crystals. Black C limited the progressive aging of amorphous Fe phases and greatly enriched SRO ferrihydrite in the redox-fluctuating and high-leaching environment. The transformation of SRO ferrihydrite into the more crystalline Fe oxides was controlled by the local pH environment. A strong signal from the complexed phenolic group (aryl-OH, 1241 cm –1 ) and a distinct band of inner-sphere complexation (Fe-aryl C, 1380–1384 cm –1 ) were identified in the FTIR spectra. The enrichment of poorly crystalline minerals can have positive feedback on the long-term stabilization of BC. The scale-up application of biochar to agricultural and ecological systems may have a long-lasting impact on the enrichment and transformation of the SRO minerals in the soil.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Developing a new ethylene glycol/H 2 O pretreatment system to achieve efficient enzymatic hydrolysis of sugarcane bagasse cellulose and recover highly active lignin: Countercurrent extraction

Improving pretreatment efficiency is a critical premise in achieving efficient biomass conversion, and obtaining high-performance natural polymers is the guarantee of high-value conversion of biomass. Here, in this study, a new pilot-scale continuous countercurrent pretreatment reaction unit about ethylene glycol-alkali solution was designed for pretreating sugarcane bagasse in order to achieve efficient separation of the three major components of lignocellulose when expanding the scale of pretreatment, reduce lignin deposition on the fiber surface, and obtain highly active lignin and excellent enzymatic hydrolysis efficiency of cellulose. X-ray diffractometer (XRD), X-ray photoelectron spectrometer (XPS), brunauer-emmett-teller (BET) and scanning electron microscope (SEM) methods are used to analyze the structural properties of sugarcane bagasse before and after pretreatment, and high-performance liquid chromatography (HPLC) is used to analyze the monosaccharide components in the enzymatic solution. In addition, the structural properties of the recovered lignin are analyzed by gel permeation chromatography (GPC), 31 P NMR and 2D-HSQC-NMR methods. The results indicate that the system can gain a high cellulose recovery of 92.99% along with a lignin removal of 95.33%, and recovered lignin has low lignin carbohydrate complexes, low condensation, and rich in phenolic hydroxyl groups for 1.95 mmol/g. Meanwhile, the countercurrent pretreatment system can effectively reduce the deposition of lignin on the cellulose surface, which is evidently superior to the non-countercurrent pretreatment and facilitates the efficiency of enzymatic saccharification of substrate, achieving a high glucose yield of 99% as well as a total sugar yield of 91.11%. The method efficiently separates biomass in a green manner, and solid residues are easily hydrolyzed, showing potential for industrial-scale production.

09 BIOMASS FUELS↗
DOE OSTI2020

Antecedent conditions determine the biogeochemical response of coastal soils to seawater exposure

Coastal landscapes are increasingly exposed to seawater due to sea level rise and extreme weather events. The biogeochemical responses of these vulnerable ecosystems are poorly understood, limiting our ability to predict how their role in local and global biogeochemical cycles will shift under future conditions. Here we evaluate how antecedent conditions influence the biogeochemical response of soil to seawater inundation events based on a 42-day laboratory incubation experiment with soils collected from a natural salinity gradient across a coastal floodplain. We quantified influences of seawater inundation on intact soil cores through high-frequency carbon dioxide (CO 2 ) and methane (CH 4 ) gas fluxes measurements as well as ultrahigh resolution characterization of organic matter chemistry and metabolites. Mean CO 2 and CH 4 fluxes were higher after inundation compared to control cores for soils that had low in situ salinity. Soils with low in situ salinity also exhibited significant shifts in organic matter profiles after inundation, with surficial soils (0-7.5 cm) becoming more enriched in phenolic compounds, compared to deeper soils (7.5-15 cm). The number of biochemical transformations inferred from mass spectrometry increased significantly after inundation for soils with low in situ salinity, and a trend of decreasing thermodynamic favorability with increasing salinity was observed, suggesting an increase in microbial activity following inundation. Our results suggest that seawater inundation of low-salinity terrestrial environments can lead to increased microbial activity, preferential depletion of more thermodynamically favorable compounds, and increased soil carbon release. Finally, we conclude that the biogeochemical impacts of future seawater exposure will be modulated by antecedent conditions associated with landscape position within coastal watersheds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Alkylation of monomeric, dimeric, and polymeric lignin models through carbon-hydrogen activation using Ru-catalyzed Murai reaction

In this study, we have assessed directed carbon-hydrogen activation (CHA) for alkylation of monomeric, dimeric, and polymeric lignin models using Murai's catalyst [RuH 2 (CO)(PPh 3 ) 3 ]. Based on related work from our laboratory showing that isolated organosolv lignin bears benzylic directing groups ideal for CHA reactions, this approach could offer new methodology for the valorization of biorefinery lignin. Monomeric and dimeric models bearing a keto group at the benzylic position undergo Ru-catalyzed alkylation in good to excellent yield. Similarly, models bearing a benzylic OH group also undergo alkylation via a tandem oxidation/alkylation process enabled by the Ru catalyst. Polymeric models show low levels of functionalization as a result of the poor solubility of the starting polymer. With unsymmetrical models, functionalization occurs first at the least sterically hindered ortho-site, but a subsequent alkylation, leading to disubstituted products can occur at the more sterically hindered site, leading to hexasubstituted arenes. The reaction shows sensitivity to free phenolic OH groups, which appears to reduce the yield in some reactions, and is also a contributing factor to the low yields observed with polymeric lignin models. Finally, combining CHA methodology with lignin isolation technology able to introduce appropriate directing groups for catalytic functionalization will form the basis for improved conversion of lignin to high value chemical products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhancing physicochemical, bioactive, and nutritional properties of sweet potatoes: Ultrasonic contact drying with slot jet nozzles compared to hot-air drying and freeze drying

Sweet potatoes are a rich source of nutrients and bioactive compounds, but their quality can be impacted by the drying process. This study investigates the impact of slot jet reattachment (SJR) nozzle and ultrasound (US) combined drying (SJR + US) on sweet potato quality, compared to freeze-drying (FD), SJR drying, and hot air drying (HAD). SJR + US drying at 50 °C closely resembled FD in enhancing quality attributes and outperformed HAD and SJR in key areas such as rehydration, shrinkage ratios, and nutritional composition. Notably, SJR + US at 50 °C produced the highest total starch (36.84 g/100 g), total dietary fiber (8.48 g/100 g), total phenolic content (158.19 mg GAE/100 g), total flavonoid content (119.08 mg QE/g), DPPH antioxidant activity (6.44 μmol TE/g), β-carotene (31.98 mg/100 g), and vitamin C (5.27 mg/100 g). It also exhibited higher glass transition temperatures (Tg: 14.49 °C), indicating better stability at room temperature. The hardness values for SJR + US samples were similar to FD, while HAD samples had the highest hardness. SJR + US at 50 °C resulted in the lowest total color changes (ΔE), indicating minimal impact on appearance. Additionally, FTIR analysis revealed that peaks in specific spectral regions indicated superior preservation of bioactive compounds in SJR + US samples compared to other methods, which was also confirmed by principal component analysis (PCA) and heatmap visualization. Overall, these findings suggest that SJR + US is an effective alternative to conventional drying techniques, significantly improving the quality of dried sweet potatoes.

Color↗