SEARCH · Search NASA

Results for “PLATES - BUCKLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Ultrasonic characterization of multilayered thick composite plates

Guided wave propagation in a periodically laminated plate is considered when each lamina is transversely isotropic with its symmetry axis lying in the plane of the graphite-epoxy plate. The dispersion behavior of propagation modes influences the dynamic response and can be used to ultrasonically characterize the mechanical properties of the laminated plate. It is assumed that fibers are oriented at 90 deg to one another in adjacent layers and all the laminae are of equal thickness. Results obtained are in good agreement with exact solutions of previous studies.

Karunasena, W.↗

NASA NTRS1992

Initial postbuckling response of anisotropic laminated rectangular plates

It has been shown that anisotropic plates can have unstable postbuckling behavior resulting in potential imperfection sensitivity. The present paper quantifies the degree of instability for rectangular, simply supported asymmetrically laminated plates. The analysis is based on asymptotic Koiter-type expansion of postbuckling response. The degree of postbuckling instability is quantified in terms of the reduction in load carrying capacity in the immediate postbuckling range. For graphite-epoxy plates it is found that this measure of instability is very small unless the lamination asymmetry is very pronounced.

Johnson, Eric R.↗

NASA NTRS1992

Analytical shape sensitivities and approximations of modal response of generally laminated tapered skew plates

In the present determination of the derivatives of natural frequencies and mode shapes of a generally laminated tapered skew plate, with respect to various shape parameters, springs are used to simulate the essential boundary conditions. The independent shape parameters are plate surface area, aspect ratio, taper ratio, and sweep angle. Eigenvalues and eigenvectors are approximated over the range of the variable using linear, exponential, and pseudoexponential approximation schemes, and are compared with reanalysis-obtained values. Numerical results are presented for symmetrically and unsymmetrically laminated plates.

Singhvi, Sarvesh↗

NASA NTRS1991

Composite plates impact damage - An atlas

The present volume on impact damage in composite plates presents an extensive compendium of visual and graphic data regarding a variety of material and impactor parameters. The photographs are taken with X-ray and C-scan imaging in conjunction with a dye penetrant to show matrix cracks and delaminations. Impact and static-loading tests are performed on plates of graphite-epoxy, graphite-toughened epoxy, and graphite-PEEK materials. The images are presented to yield specific visual data regarding such parameters as impactor velocity, thickness of the back ply group, impactor nose radius, and the effects of multiple delaminations. The images are grouped in eight subsets that correspond to parameters including plate length, material, and the difference in fiber orientation between adjacent ply groups. This substantial volume represents a systematic effort to study the effects of several material parameters on impact damage.

Finn, Scott R.↗

NASA NTRS1992

Accuracy of critical-temperature sensitivity coefficients predicted by multilayered composite plate theories

An assessment is made of the accuracy of the critical-temperature sensitivity coefficients of multilayered plates predicted by different modeling approaches, based on two-dimensional shear-deformation theories. The sensitivity coefficients considered measure the sensitivity of the critical temperatures to variations in different lamination and material parameters of the plate. The standard of comparison is taken to be the sensitivity coefficients obtained by the three-dimensional theory of thermoelasticity. Numerical studies are presented showing the effects of variation in the geometric and lamination parameters of the plate on the accuracy of both the sensitivity coefficients and the critical temperatures predicted by the different modeling approaches.

Noor, Ahmed K.↗

NASA NTRS1992

Mechanics of anisotropic plates and shells - A new look at an old subject

A number of aspects of the mechanics of anisotropic plates and shells are discussed. The topics covered include computational models of anisotropic plates and shells, consequences of anisotropy on deformation couplings, symmetry types, stress concentrations and edge effects, and importance of transverse shear deformation; recent applications and recent advances in the modeling and analysis of anisotropic plates and shells; and new research directions.

Noor, A. K.↗

NASA NTRS1992

Pulse propagation in a laminated composite plate and nondestructive evaluation

The surface response of a laminated composite plate with delamination cracks has been studied in this paper. The objective of this study is to analyze the surface response both in the time and frequency domains due to delamination cracks at different depths in a cross-ply composite plate. For reasons of simplicity, attention has been focused here on two-dimensional (plane-strain) motions. The source of excitation is taken to be a line vertical force acting perpendicular to the fibers in a lamina. Numerical results are presented, showing peak responses at certain resonance frequencies. A comparison of these results with those for a uniaxial graphite epoxy plate shows characteristic differences.

Ju, T. H.↗

NASA NTRS1992

Episodic plate tectonics on Venus

Studies of impact craters on Venus from the Magellan images have placed important constraints on surface volcanism. Some 840 impact craters have been identified with diameters ranging from 2 to 280 km. Correlations of this impact flux with craters on the Moon, Earth, and Mars indicate a mean surface age of 0.5 +/- 0.3 Ga. Another important observation is that 52 percent of the craters are slightly fractured and only 4.5 percent are embayed by lava flows. These observations led researchers to hypothesize that a pervasive resurfacing event occurred about 500 m.y. ago and that relatively little surface volcanism has occurred since. Other researchers have pointed out that a global resurfacing event that ceased about 500 MYBP is consistent with the results given by a recent study. These authors carried out a series of numerical calculations of mantle convection in Venus yielding thermal evolution results. Their model considered crustal recycling and gave rapid planetary cooling. They, in fact, suggested that prior to 500 MYBP plate tectonics was active in Venus and since 500 MYBP the lithosphere has stabilized and only hot-spot volcanism has reached the surface. We propose an alternative hypothesis for the inferred cessation of surface volcanism on Venus. We hypothesize that plate tectonics on Venus is episodic. Periods of rapid plate tectonics result in high rates of subduction that cool the interior resulting in more sluggish mantle convection.

Turcotte, Donald↗

NASA NTRS1992

Failure of composite plates under static biaxial planar loading

The project involved detailed investigations into the failure mechanisms in composite plates as a function of hole size (holes centrally located in the plates) under static loading. There were two phases to the project, the first dealing with uniaxial loads along the fiber direction, and the second dealing with coplanar biaxial loading. Results for the uniaxial tests have been reported and published previously, thus this report will place emphasis on the second phase of the project, namely the biaxial tests. The composite plates used in the biaxial loading experiments, as well as the uniaxial, were composed of a single ply unidirectional graphite/epoxy prepreg sandwiched between two layers of transparent thermoplastic. This setup enabled us to examine the failure initiation and propagation modes nondestructively, during the test. Currently, similar tests and analysis of results are in progress for graphite/epoxy cruciform shaped flat laminates. The results obtained from these tests will be available at a later time.

Waas, Anthony M.↗

NASA NTRS1992

Zone plate lens antennas for millimeter and submillimeter wavelengths

Zone plate lenses are a type of focusing element which function essentially as differential phase shifters, having a relatively few, coarsely quantized phase delays across the incident beam of radiation. The major advantages are ease of fabrication and much reduced thickness, compared to conventional refractive focusing elements. These considerations are both of particular importance for the submillimeter range, in which manufacturing tolerances for curved optical elements can pose significant problems, and where the absorption of readily available dielectric materials is quite large. In this presentation we briefly review the theory of zone plate lens operations, present a relatively simple method for calculating the aperture efficiency of zone plate lenses used as antennas, and show some theoretical and measured results in the 100 GHz range.

Goldsmith, Paul F.↗

NASA NTRS1991

Delaminations in composite plates under impact loads

A method is presented for calculating the locations, shapes, and sizes of delaminations which occur in a fiber reinforced composite plate subjected to non-penetrating (low velocity) impact of a solid object. The plate may be simply supported, clamped, or free along its edges. A failure model of the delamination formation was developed. This model was then coupled with a finite element analysis. The model and the finite element analysis were then implemented by a computer code (IMPACT-ST) which can be used to estimate the damage initiation load and the locations, shapes, and sizes of the delaminations. Tests were performed measuring the geometries of the delaminations in graphite-epoxy, graphite-toughened epoxy, and graphite-PEEK plates impacted by a projectile with a spherical tip having masses ranging from 0.355 lbm to 0.963 lbm and velocities from 50 in/sec to 225 in/sec. The data were compared to the results of the model, and good agreements were found between the measured and the calculated delamination lengths and widths.

Finn, Scott R.↗

NASA NTRS1992

Friction-factor data for flat-plate tests of smooth and honeycomb surfaces

Friction factors for honeycomb surfaces were measured with a flat plate tester. The flat plate test apparatus was described and a method was discussed for determining the friction factor experimentally. The friction factor model was developed for the flat plate test based on the Fanno Line Flow. The comparisons of the friction factor were plotted for smooth surfaces and six-honeycomb surfaces with three-clearances, 6.9 bar to 17.9 bar range of inlet pressures, and 5,000 to 100,000 range of the Reynolds number. The optimum geometries for the maximum friction factor were found as a function of cell width to cell depth and cell width to clearance ratios.

Ha, T. W.↗

NASA NTRS1993

Photometric calibration of NGS/POSS and ESO/SRC plates using the NOAO PDS measuring engine. II - Surface photometry

In this paper we present a method to calibrate surface photometry of faint sources measured from direct photographic plates, such as those of the NGS/POSS and ESO/SRC Sky Survey. This calibration procedure does not require scanning sensitometer spots on the plates, but instead uses measurements of the brightness profiles of many faint stars of known brightness to fit a linearized approximation to the characteristic curve. The approximation is valid for only low- to medium-density emulsions, so this technique is appropriate only for relatively faint emission. Comparison between measurements of representative extended sources on the NGS/POSS and CCD images indicates that surface photometry can be obtained from the Sky Survey plates accurate to 0.1-0.3 mag in the range mu(B) between 23 and 27 and mu(R) between 22 and 26 mag/sq arcsec.

Cutri, Roc M.↗

NASA NTRS1993

Nonlinear vibrations of thin arbitrarily laminated composite plates subjected to harmonic excitations using DKT elements

A finite element formulation is presented for determining the large-amplitude free and steady-state forced vibration response of arbitrarily laminated anisotropic composite thin plates using the Discrete Kirchhoff Theory (DKT) triangular elements. The nonlinear stiffness and harmonic force matrices of an arbitrarily laminated composite triangular plate element are developed for nonlinear free and forced vibration analyses. The linearized updated-mode method with nonlinear time function approximation is employed for the solution of the system nonlinear eigenvalue equations. The amplitude-frequency relations for convergence with gridwork refinement, triangular plates, different boundary conditions, lamination angles, number of plies, and uniform versus concentrated loads are presented.

Chiang, C. K.↗

NASA NTRS1992

Propagation of flexural mode AE signals in GR/EP composite plates

A Fourier phase technique has been used to measure the dispersion of the flexural plate mode in graphite-epoxy composite laminates. Classical plate theory is shown to be of limited value in predicting the dispersion of this mode because it assumes that the effects of shear deformation and rotatory inertia are negligible. Higher-order plate theory, which includes these effects, gives much better agreement with measured values.

Prosser, W. H.↗

NASA NTRS1958

Handbook of structural stability part VI : strength of stiffened curved plates and shells

A comprehensive review of failure of stiffened curved plates and shells is presented. Panel instability in stiffened curved plates and general instability of stiffened cylinders are discussed. The loadings considered for the plates are axial, shear, and the combination of the two. For the cylinders, bending, external pressure, torsion, transverse shear, and combinations of these loads are considered. When possible, test data and theory were correlated. General instability in stiffened cylinders was investigated. For bending and torsion loads, test data and theory were correlated. For external pressure several existing theories were compared. As a result of this investigation a unified theoretical approach to analysis of general instability in stiffened cylinders was developed. (author)

Becker, Herbert↗

NASA NTRS1953

Influence of End Plates on Lift and Flow Field of a Canard-type Control Surface at a Mach Number of 2.00

The influence of triangular-shaped end plates on the lift and the flow field of a canard-type control surface mounted on a symmetrical fuselage was investigated in the Lewis 8- by 6-foot supersonic wind tunnel at a Mach number of 2.00, body angle of attack of 2 degrees, and control-surface deflection angles of 3 degrees, 6 degrees, 8 degrees, and 10 degrees. The investigation demonstrated that the addition of end plates to a canard-type control surface increased its lift and rearranged the single vortex into a two-vortex system. Perforating the end plates reduced these effects and resulted in a decrease in lift and a change in the flow-field characteristics.

DIHEDRAL - COMPLETE WINGS↗

NASA NTRS1954

Formulas for the elastic constants of plates with integral waffle-like stiffening

Formulas are derived for the fifteen elastic constants associated with bending, stretching, twisting, and shearing of plates with closely spaced integral ribbing in a variety of configurations and proportions. In the derivation the plates are considered, conceptually, as more uniform orthotropic plates somewhat on the order of plywood. The constants, which include the effectiveness of the ribs for resisting deformations other than bending and stretching in their longitudinal directions, are defined in terms of four coefficients, and theoretical and experimental methods for the evaluation of these coefficients are discussed. Four of the more important elastic constants are predicted by these formulas and are compared with test results. Good correlation is obtained. (author)

Dow, Norris R↗