Search NASA⌕ Search

SEARCH · Search NASA

Results for “POLISHING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Optical stability of coatings exposed to four years space environment on OSO-III.

The Thermal Control Coatings Experiment flown on OSO 3 in the near-earth space environment was designed to measure changes in the solar absorptance and IR emittance of selected test coatings. The present work describes results obtained from four years in orbit. Changes in solar absorptance of the coatings are illustrated as a function of equivalent sun hours, and it is seen that five of eleven coatings considered exhibit no change in solar absorptance over four years or 7500 equivalent sun hours. The effects of micrometeoroids on polished metal surfaces are judged to be negligible for a near-earth mission of four years.

Millard, J. P.↗
NASA NTRS1973

Ventifact evolution in Wright Valley, Antarctica.

Ventifacts occurring on extensive wind-deflated surfaces throughout the ice-free Wright Valley are the product of complex evolutionary processes. The wind produces a lag gravel which continues to evolve at a reduced rate as coarser granule and gravel fractions are removed. The morphology of ventifacts forming the lag gravels suggests that the distribution of wind-polished faces is determined largely by the shape of the original unpolished rock fragments. In the early stages ventifacts tend to be oriented either transverse or parallel to the wind direction. Salt weathering is also a major factor in determining the morphology of the Wright Valley ventifacts.

Lindsay, J. F.↗
NASA NTRS1973

Emittance measurement of Surveyor 3 material.

Calorimetric measurements of the total hemispherical emittance of a section of polished aluminum support tubing from the Surveyor 3 spacecraft are reported. The values found, 0.090 at 25 C and 0.089 at 50 C, are lower than was expected from a visual estimate but are in good agreement with an estimate based upon scanning electron microscopy of the tubing.

Dahms, R. G.↗
NASA NTRS1973

Properties of vacuum-evaporated boron films

The work on the properties of thin boron films made by vacuum evaporation of elemental boron using an electron beam as the energy source is reported. The program aimed at characterizing the properties of vacuum evaporated films. The work was directed toward those variables considered to be important in affecting the tensile strength of the boron films. In general, the thickness of the films was less than 0.002 in. The temperature of the substrate on which the boron was condensed was found to be most important. Three distinctly different forms of boron deposit were produced. Although the transition temperature was not sharply defined, at substrate temperatures of less than approximately 600 deg C the boron deposits were amorphous to X-ray. If the substrate were highly polished, the deposits were black and mirror-like. For substrates with coefficients of thermal expansion close to that of boron, the deposits were then continuous and uncracked. The studies suggest that the potential continues to exist for film-type composites to have both high strength and high modulus.

Feakes, F.↗
NASA NTRS1973

Analysis of the relationship between errors in manufacture of slot connections and gear drive noises

On the basis of experimental research, an analysis was carried out of the effect of certain errors in manufacture of straight-barrel slots on the noise characteristics of gear drives. In carrying out the experiments, the gear crowns of the test wheels were held immovable, and only the geometric dimensions of the slots and the mutual locations of the individual elements were varied. The investigation of the effect of each factor was carried out under otherwise equal conditions, on 34:56 cog ratio gear pairs (m = 2mm), made of 40 C steel, with a gear crown accuracy of 7 X, machining fineness 7, at a speed v = 7.1 m/sec. The number of slots was 6. The clearance in slot pairs in dimension D, equal to 0.015, 0.05, 0.08 and 0.110 mm, was obtained by change in the outer diameter of the spindle by means of polishing. The results of the tests of the experimental wheels showed that their noise level increases with increase in clearance.

Bodronosov, M. K.↗
NASA NTRS1974

Improved thermoelectrically cooled quartz crystal microbalance

Design changes in the thermoelectrically-cooled quartz microbalance, which is used to monitor surface contamination in space simulation chambers, is described in terms of its extended temperature range, increased temperature control, mass sensitivity, and cooling power. The mass sensor uses 20 MHz quartz crystals having a sensitivity of 8.8 x 10 to the minus tenth power g/sq cm - Hz. The crystals are optically polished, metal plated, and overplated with magnesium fluoride to simulate an optical surface. The microbalance temperature circuitry is designed to readout and control surface temperature between 100 C and minus 59 C to plus or minus 0.5 C, and readout only temperature between minus 60 C and minus 199 C using auxiliary liquid nitrogen cooling. Data is included on the measurement of oil contamination of surfaces as a function of temperature in space simulation chambers.

D. McKeown↗
NASA NTRS1973

Microsampling techniques for infrared spectroscopic analysis of lunar and terrestrial minerals

Microsampling techniques have been developed for infrared analysis of single mineral grains from lunar rocks and dusts, allowing a detailed molecular structure characterization of these complex fine-grained samples. The methods include special devices for isolating single grains, preparing micropellets from the grains, and obtaining in situ microspecular reflectance spectra from grains in polished rock samples. Although specifically developed for the work on lunar samples, the special techniques for single grain infrared analysis were found to be equally useful in studies of complex terrestrial mineral samples. For example, infrared microanalysis has contributed substantially in solving problems concerned with our natural resources, such as the structural characterization of minerals from commercial iron ores, marine deposits, coal, and fly ash derived from coal.

Estep, P. A.↗
NASA NTRS1974

Whole-rock uranium analysis by fission track activation

We report a whole-rock uranium method in which the polished sample and track detector are separated in a vacuum chamber. Irradiation with thermal neutrons induces uranium fission in the sample, and the detector records the integrated fission track density. Detection efficiency and geometric factors are calculated and compared with calibration experiments.

Weiss, J. R.↗
NASA NTRS1974

Reflectance and optical constants for Cer-Vit from 250 to 1050 A

The reflectance for a bowl-feed polished Cer-Vit sample was measured at nine wavelengths and five angles of incidence from 15 to 85 deg. Optical constants were derived by the reflectance-vs-angle-of-incidence method and compared to previously reported values for ultralow-expansion fused silica and several other glasses. Surface-roughness corrections of the reflectance data and optical constants are discussed.

Osantowski, J. F.↗
NASA NTRS1974

Interdiffusion in the Ni/TD-NiCr and Cr/TD-NiCr systems

The diffusion of Ni and Cr into TD-NiCr has been studied over the 900 to 1100 C temperature range. The diffusion couples were prepared by electroplating Cr and Ni on polished TD-NiCr wafers. Concentration profiles produced as a result of isothermal diffusion at 905, 1000, and 1100 C were determined by electron microprobe analysis. The Boltzmann-Matano analysis was used to determine concentration-dependent diffusion coefficients which were found to compare favorably with previously reported values. These data suggest that 2 vol % ThO2 distribution has no appreciable effect on the rates of diffusion in TD-NiCr with a large grain size. This supports the view that an inert dispersoid in an alloy matrix will not in itself lead to enhanced diffusion unless a short-circuit diffusion structure is stabilized.

Pawar, A. V.↗
NASA NTRS1974

Optical characteristics of regolith from the Sea of Fertility, Sea of Tranquillity, and Ocean of Storms

A diffuse reflection spectra analysis is reported for regolith returned by the Luna 16 automatic station and by the Apollo 11 and Apollo 12 expeditions. The spectra of the specular reflection of Sea of Fertility regolith, as well as the spectra of diffuse reflection from polished sections of lunar rocks from the Sea of Tranquillity and the Ocean of Storms have no well-defined structures and are close to each other. The lowest reflectivity is exhibited by the Sea of Tranquillity regolith, and the highest -- by the Ocean of Storms regolith. A weak absorption band with a maximum near 1 nm is noted in the spectra, corresponding to the Fe-2(+) ion in the octahedral position in the lattice of regolith mineral constituents. When the indicatrix of scattering of the regolith was recorded, a specular component was detected.

Antipova-Karatayeva, I. I.↗
NASA NTRS1975

Growth defects in thick ion-plated coatings

Industrial ion plating conditions were selected to deposit metallic coatings such as copper, gold, and chromium 2 micrometer thick on metal and glass substrates. The surface finishes of 304 stainless steel, copper, and brass were utilized with mechanically and electrolytically polished surfaces. Nodular growth occurred in these coatings during ion plating as revealed by scanning electron microscopy. Surface irregularities such as scratches, steps, ledges, and so forth are responsible for outward growth, the typical cone type, whereas surface contaminants and loosely settled foreign particles are responsible for lateral growth; namely, the extreme localized surface outgrowths. These defect crystallographic features create porosity in the coatings when subjected to stresses and strains.

Spalvins, T.↗
NASA NTRS1975

Laser head for simultaneous optical pumping of several dye lasers

The invention is a laser head for simultaneous pumping several dye lasers with a single flash lamp. The laser head includes primarily a multi-elliptical cylinder cavity with a single flash lamp placed along the common focal axis of the cavity and with capillary tube dye cells placed along each of the other focal axes of the cavity. The inside surface of the cavity is polished. Hence, the single flash lamp supplies the energy to the several dye cells.

Mumola, P. B.↗
NASA NTRS1975

Oxygen reduction of several gold alloys in 1-molar potassium hydroxide

With rotated disk-and-ring equipment, polarograms and other electrochemical measurements were made of oxygen reduction in 1-molar potassium hydroxide on an equiatomic gold-copper (Au-Cu) alloy and a Au-Cu alloy doped with either indium (In) or cobalt (Co) and on Au doped with either nickel (Ni) or platinum (Pt). The results were compared with those for pure Au and pure Pt. The two-electron reaction dominated on all Au alloys as it did on Au. The polarographic results at lower polarization potentials were compared, assuming exclusively a two-step reduction. A qualified ranking of cathodic electrocatalytic activity on the freshly polished reduced disks was indicated: anodized Au Au-Cu-In Au-Cu Au-Cu-Co is equivalent or equal to Au-Pt Au-Ni. Aging in distilled water improved the electrocatalytic efficiency of Au-Cu-Co, Au-Cu, and (to a lesser extent) Au-Cu-In.

Miller, R. O.↗
NASA NTRS1975

Dynamic SEM wear studies of tungsten carbide cermets

Dynamic friction and wear experiments were conducted in a scanning electron microscope. The wear behavior of pure tungsten carbide and composite with 6 and 15 weight percent cobalt binder was examined, and etching of the binder was done to selectively determine the role of the binder in the wear process. Dynamic experiments were conducted as the tungsten carbide (WC) and bonded WC cermet surfaces were transversed by a 50 micron radiused diamond stylus. These studies show that the predominant wear process in WC is fracture initiated by plastic deformation, and the wear of the etched cermets is similar to pure WC. The presence of the cobalt binder reduces both friction and wear. The cementing action of the cobalt reduces granular separation, and promotes a dense polished layer because of its low shear strength film-forming properties. The wear debris generated from unetched surface is approximately the same composition as the bulk.

Brainard, W. A.↗
NASA NTRS1975

The growth of deactivated layers on CsI(Na) scintillating crystals

An effective and sensitive measurement of the depth of a deactivated or dead layer can be obtained from the relative attenuation of the 22.162 KeV and 87.9 KeV X-rays emitted by Cd 109. The alpha-particles emitted by Am 241 are also useful in measuring dead layers less than 25 microns. The properties and temporal development of dead layers are discussed in detail. The rate of growth of a deal layer is closely related to the ambient humidity, and the damage to the crystal is irreversible by any known process. The dead layer can be minimized by polishing all crystal surfaces and by keeping the crystal in a vacuum or a dry atmosphere. Since a dead layer seriously inhibits the response of a crystal to X-rays of energies below approximately 20 keV, CsI(Na) detectors should not be used at these energies unless precautions are taken to ensure that no dead layer forms.

Goodman, N. B.↗
NASA NTRS1974

Fretting in aircraft turbine engines

Fretting usually produces both polished and pitted areas. Fretting occurs in connection with the relative motion between contacting surface elements. Particular attention is given to fretting in seals, splines, fans, compressors, and turbine blades. Recommended approaches to mitigate fretting problems include a reduction of the adhesion between two surfaces. Approaches for doing this may include the development of alloys which spontaneously generate a self-healing surface film, different in composition from the bulk alloy. Other fundamental adhesion studies have shown that surface crystal structure and crystallographic orientation significantly affect the adhesion properties of alloys.

Johnson, R. L.↗
NASA NTRS1974

Near-earth cosmic dust results from S-149

Three space exposures (34, 46 and 33 days) of thin films and polished metal plates with a total area of 0.12 sq m per exposure were carried out during Skylab via the S-149 experiment. Study of the materials recovered indicates that the S-149 experiment contains important information concerning cosmic dust in the near-earth vicinity. Craters and penetration holes have been found ranging from 135 micron diameter to less than 0.5 micron. A cosmic dust flux curve in the mass range from 10 to the minus 16th to 10 to the minus 7th grams is presented. Evidence is given concerning the directional characteristics of the particles and their breakup in near-earth space is presented.

Hemenway, C. L.↗