Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROCESS SOLUTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Periodic Mesoporous Hexagonal Boron Nitride at High Pressure: A Route to Cubic Boron Nitride Nanocrystals and Mesoporous Cubic Boron Nitride

Periodic mesoporous hexagonal boron nitride was investigated as a precursor for nanoscale forms of cubic boron nitride. Cubic boron nitride (c-BN) nanocrystals were obtained at a pressure of 14 GPa and a temperature of 13008C. The synthesized nanocrystals have diameters of ~ 50 nm and are solution processible. Mesoporous c-BN formed at a pressure of 10 GPa and 1000 8C. The mesoporous c-BN has a pore size distribution centered around 3 nm and a surface area of 122 m2/g as determined by electron tomography. At pressures of 8 and 6 GPa near monodisperse h-BN nanodiscs with diameters of 0.5-1 mm and 0.2-0.5 mm were formed, respectively. The discs formed colloidal solutions in acetone. The hydrodynamic radius of the discs matched the radii determined by dynamic light scattering indicating absence of nanodisc aggregation in solution.

Mandal, Manik↗

Enhanced optoelectronic quality of perovskite thin films with hypophosphorous acid for planar heterojunction solar cells

Solution-processed metal halide perovskite semiconductors, such as CH 3 NH 3 PbI 3 , have exhibited remarkable performance in solar cells, despite having non-negligible density of defect states. A likely candidate is halide vacancies within the perovskite crystals, or the presence of metallic lead, both generated due to the imbalanced I/Pb stoichiometry which could evolve during crystallization. Herein, we show that the addition of hypophosphorous acid (HPA) in the precursor solution can significantly improve the film quality, both electronically and topologically, and enhance the photoluminescence intensity, which leads to more efficient and reproducible photovoltaic devices. We demonstrate that the HPA can reduce the oxidized I2 back into I-, and our results indicate that this facilitates an improved stoichiometry in the perovskite crystal and a reduced density of metallic lead.

14 SOLAR ENERGY↗

Atomically Defined Edge-Doping of Graphene Nanoribbons for Mesoscale Electronics

The outstanding transformative potential of graphene, an infinite two-dimensional sheet of carbon atoms tightly packed into a honeycomb lattice, has been recognized mostly due to its exceptionally high electric conductivity, thermal conductivity, and tensile strength. These undeniably very desirable properties, however, represent only a very small facet of the true potential of all-sp2 carbon materials and its promise to revolutionize the field of molecular electronics. Graphene's most unusual characteristics emerge when the infinite macroscopic sheet is scaled down to nanometer dimensions. The exploration, realization, and implementation of these truly exotic magnetic and electronic properties rely on the development of innovative synthetic strategies that provide atomically precise control over the self-assembly of mesoscale objects. While traditional device architectures based on inorganic semiconductors have been fabricated using a top-down approach, we pursued a diametrically opposite strategy. Our design of a new generation of high-performance electronic materials relies on a modular bottom-up strategy. This highly multidisciplinary research program has been rooted in the synthesis of functional organic materials with precisely defined properties, their controlled assembly into hierarchical structures, and the evaluation of their performance at the molecular and the macroscopic scale. A part of this research program we have developed the chemical tools required to synthesize and to fine-tune the physical properties of graphene nanoribbons (GNR) with atomic precision. We further demonstrated that the innovative techniques and the expanded knowledge can be used to rationally tailor desired physical properties and function into nanometer-scale carbon-based electronic devices; e.g. transistors as logic gates in computing, data storage media based on electrically gated spin valves, or molecular amplifiers, all functionally integrated in atomically defined GNRs. We demonstrated the design and experimental realization of a rationally engineered graphene nanoribbon superlattice that hosts a 1D array of symmetry-protected topological states. We developed a hierarchical bottom-up fabrication strategy for graphene nanoribbons that preferentially exhibit a single heterojunction interface rather than a random statistical sequence of junctions along the ribbon. We reported the bottom-up synthesis of a series of atomically precise graphene nanoribbons featuring trigonal planar heteroatom dopants (nitrogen, oxygen, and sulfur) along the edges that induce a narrowing of the intrinsic band gap by ~0.2–0.3 eV per dopant atom. We reported the bottom-up synthesis of a graphene nanoribbon heterostructure featuring a highly tunable porphyrin quantum dot embedded at the center of a solution processable graphene nanoribbon. We reported a new technique for fabricating bottom-up graphene nanoribbon heterojunctions through a late-stage chemical transformation that results in atomically sharp heterojunction structures from a single precursor. We demonstrated the intrinsic performance enhancement of a composite material comprised of gold nanoparticles (AuNPs) embedded in a bottom-up synthesized graphene nanoribbon matrix for the electrocatalytic reduction of CO 2 . We developed a scalable, solution-based approach toward the synthesis of an exotic class of polycyclic aromatic hydrocarbons that exhibit unusual electronic and magnetic properties in the ground state. We reported the bottom-up synthesis and characterization of atomically-defined graphene nanoribbons featuring a regioregular pattern of group III dopant atoms (boron) along the backbone of the ribbon.

36 MATERIALS SCIENCE↗

The Highly Robust Electrical Interconnects and Ultrasensitive Biosensors Based on Embedded Carbon Nanotube Arrays

We report on our recent breakthroughs in two different applications using well-aligned carbon nanotube (CNT) arrays on Si chips, including (1) a novel processing solution for highly robust electrical interconnects in integrated circuit manufacturing, and (2) the development of ultrasensitive electrochemical DNA sensors. Both of them rely on the invention of a bottom-up fabrication scheme which includes six steps, including: (a) lithographic patterning, (b) depositing bottom conducting contacts, (c) depositing metal catalysts, (d) CNT growth by plasma enhanced chemical vapor deposition (PECVD), (e) dielectric gap-filling, and (f) chemical mechanical polishing (CMP). Such processes produce a stable planarized surface with only the open end of CNTs exposed, whch can be further processed or modified for different applications. By depositing patterned top contacts, the CNT can serve as vertical interconnects between the two conducting layers. This method is fundamentally different fiom current damascene processes and avoids problems associated with etching and filling of high aspect ratio holes at nanoscales. In addition, multiwalled CNTs (MWCNTs) are highly robust and can carry a current density of 10(exp 9) A/square centimeters without degradation. It has great potential to help extending the current Si technology. The embedded MWCNT array without the top contact layer can be also used as a nanoelectrode array in electrochemical biosensors. The cell time-constant and sensitivity can be dramatically improved. By functionalizing the tube ends with specific oligonucleotide probes, specific DNA targets can be detected with electrochemical methods down to subattomoles.

Li, Jun↗

CoDCon Project (Final Report)

The co-decontamination (CoDCon) project was established in FY 2016 with the objectives of (a) evaluating the uncertainty in the uranium (U)/plutonium (Pu) ratio in a mixed U/Pu product from a tributyl phosphate (TBP)–based solvent extraction flowsheet, and (b) developing and demonstrating on-line optical spectroscopy for real-time monitoring of key components (e.g., Pu, U, and HNO 3 concentrations) in the process solutions. We were interested in assessing the accuracy and precision to which a specific uranium-to-plutonium (U/Pu) ratio can be achieved, which for the purposes of this project was set at a U/Pu mass ratio of 7/3. The uncertainty associated with achieving this specific target U/Pu ratio was investigated during five flowsheet tests using laboratory-scale solvent extraction equipment. In addition, optical spectroscopic techniques were incorporated into the CoDCon solvent extraction testing system, allowing real time monitoring of all input and output process streams. Two CoDCon flowsheet tests were performed in FY 2018 using a simple dissolved fuel simulant containing only U (~1 M) and Pu (~15 mM) in nitric acid (HNO 3 ; ~3 M). In FY 2019, two additional flowsheet tests were performed. For the first of these (CoDCon Run 3), the dissolved fuel simulant was similar to that used in the first two tests, with the inclusion of 1 mM neptunium (Np). The second test conducted in FY 2019 (CoDCon Run 4) used a more representative dissolved fuel simulant, including addition of non-radioactive fission product elements. A fifth CoDCon flowsheet test (CoDCon Run 5) was conducted in FY 2020, with the following additional objectives: (1) routing of the technetium (Tc) in the simulated dissolved fuel solution to the solvent extraction raffinate, and (2) routing of the Np in the simulated dissolved fuel solution to the U/Pu product. All tests used a bank of sixteen 2 cm centrifugal contactors. The tests involved first loading the solvent (30 vol% TBP dissolved in n-dodecane) with U and Pu (and Np, for Run 5), then the Pu (and Np) was stripped from the loaded solvent with a U(IV) solution (~50 mM) and the flowsheet conditions were adjusted such that some U partitioned into the Pu-containing product stream. The amount of U accompanying the Pu was monitored in real time using optical spectroscopic techniques coupled with chemometric modeling. Based on the real-time spectroscopic measurement of the U/Pu ratio, adjustments were made to the flowrate of the fresh TBP solvent phase used to scrub U from the aqueous Pu-containing product. This proved to be a very effective way to control the U/Pu mass ratio in the product. This report presents the results of the CoDCon Run 5 test. The flowsheet tested in Run 5 was substantially different than that run in the prior tests, especially the solvent loading section of the flowsheet. Two key changes were made. First, based on the objective to extract all the Np and route it with the U/Pu product, pentavalent vanadium [V(V)] was added to the feed and scrub solutions. The purpose of the V(V) was to convert all the Np to the +6 oxidation state, which is extractable by TBP. Second, a high acid (8 M HNO 3 ) scrub was added to the flowsheet to scrub the Tc from the solvent. This was followed by a low acid scrub (0.05 M HNO 3 ) to reduce the residual HNO 3 concentration in the solvent prior to the Pu stripping step. The output from the low acid scrub was collected separately, rather than routing towards the raffinate. The modifications to the solvent loading part of the flowsheet were only partially successful. The treatment with V(V) was effective at converting the Np to Np(VI). Only 1.3% of the Np remained in the raffinate solution. However, ~40% of the Np stripped out of the solvent in the low acid scrub step; nearly 20% of the Pu also was stripped from the solvent during the low acid scrub. For further development, either modifications to the flowsheet, or concentration and recycle of the low acid stream into the

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CoDCon Project: FY 2019 Status Report

The co-decontamination (CoDCon) project was established in FY 2016 with the objectives of (a) evaluating the uncertainty in the uranium (U)/plutonium (Pu) ratio in a mixed U/Pu product from a tributyl phosphate (TBP)–based solvent extraction flowsheet and (b) developing and demonstrating on-line optical spectroscopy for real-time monitoring of key components (e.g., Pu, U, and HNO 3 concentrations) in the process solutions. We are interested in establishing the accuracy and precision to which a specific uranium-to-plutonium (U/Pu) ratio can be achieved, which for the purposes of this project is set at a U/Pu mass ratio of 7/3. The uncertainty associated with achieving this specific target U/Pu ratio is being established through multiple flowsheet tests using laboratory-scale solvent extraction equipment. In addition, optical spectroscopic techniques have been incorporated into the CoDCon solvent extraction testing system, allowing real time monitoring of all input and output process streams. Two CoDCon flowsheet tests were successfully performed in FY 2018. In FY 2019, two additional flowsheet tests were performed. For the first of these (CoDCon Run 3), the dissolved fuel simulant was similar to that used in the first two tests, with the inclusion of 1 mM neptunium (Np). The second test conducted in FY 2019 (CoDCon Run 4) used a more representative dissolved fuel simulant, including addition of non-radioactive fission product elements. All tests used a bank of sixteen 2 cm centrifugal contactors. The tests involved first loading the solvent (30 vol% TBP dissolved in n-dodecane) with U and Pu, then the Pu was stripped from the loaded solvent with a U(IV) solution (~50 mM) and the flowsheet conditions were adjusted such that some U partitioned into the Pu-containing product stream. The amount of U accompanying the Pu was monitored in real time using optical spectroscopic techniques coupled with chemometric modeling. Based on the real-time spectroscopic measurement of the U/Pu ratio, adjustments were made to the flowrate of the fresh TBP solvent phase used to scrub U from the aqueous Pu-containing product. This proved to be a very effective way to control the U/Pu mass ratio in the product.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Merging Intelligent Systems Technologies with CFD Analysis Strategies: Prototype Development at NASA Ames

A collaborative team of researchers from fields of Computational Fluid Dynamics (CFD), fluid physics, computer architectures, and computer science and knowledge engineering have begun work on a prototype system that addresses several of industry's concerns in using NASA-developed CFD codes as part of the design cycle. A major problem exists in the application of CFD technologies within the aeronautics design cycle due primarily to misunderstandings in the ranges of applicability of the various solver codes or turbulence models. Features that arise during the CFD solution process need to be discriminated and recognized as actual flow features with physical support in the geometry and flow conditions of the problem being solved, or as numerical or non-physical errors arising from mis-application of solver code and its parameters, gridding strategies, or discretization. interpolations. The fundamental concept is to develop an intelligent computational system that can accept the engineer's definition of the problem and construct an optimal CFD solution. To do this requires capturing both the knowledge of how to apply the various CFD tools and how to adapt the application of those tools to flow structures as they evolve during the flow simulation. Embedded within this adaptive system approach is the additional desire to automatically identify and quantify the quality of resolution of the pertinent flow structures, be they genuine or error-induced, and then to adjust the solution strategy accordingly. This paper discusses the status of that prototyping effort.

Thompson, David E.↗

Final Scientific/Technical Report -- Single-Junction Organic Solar Cells with >15% Efficiency

Organic solar cells have the potential to offer low-cost solar energy conversion due to low material costs and compatibility with low-temperature and high throughput manufacturing processes. This project aims to further improve the efficiency of organic solar cells by applying a previously demonstrated molecular self-assembly approach to longer-wavelength light-absorbing organic materials. The team at the University of Florida designed and synthesized a series of low-bandgap organic semiconductors with functional hydrogen-bonding groups, studied their assembly characteristics and optoelectronic properties in solid-state thin film, and fabricated organic solar cells using solution processing. These new organic materials absorb light up 800 nm wavelength, and provide a maximum open-circuit voltage of 1.05 V in the resulted solar cells. The results further confirmed the effectiveness in this approach to guide the assembly of organic semiconductors in thin films to yield higher photovoltaic performance for solar energy conversion. Through this project, we have gained important understanding on designing, synthesizing, and processing organic semiconductors that contain appropriately functionalized groups to control the morphology of the organic photoactive layer in solar cells. Such fundamental knowledge could be used to further develop new functional organic materials to achieve higher photovoltaic performance, and contribute to the eventual commercialization of the organic solar cell technology.

14 SOLAR ENERGY↗

Fe{sub 3}O{sub 4} and CdS based bifunctional core–shell nanostructure

Highlights: ► First report on a room temperature aqueous process for growth of a hybrid core shell nanostructure containing a magnetic core and a semiconducting shell. ► Formation of distinct core shell nanostructure revealed by high resolution transmission electron microscopy. ► A bifunctional nature combining magnetic as well as photoresponce for the as synthesised core shell nanostructures demonstrated. ► A tendency towards self organisation of the core–shell nanostructure. ► Possible applications including purification and isolation of biological materials, drug delivery system, bio-labels, spintronics, etc. -- Abstract: A room temperature solution process for synthesis of Fe{sub 3}O{sub 4} nanoparticles and their hybrid core shell nanostructures using CdS as the shell material has been described. The as grown particles have been characterised using XRD, Rietveld refinement, high resolution transmission electron microscopy, atomic force microscopy, superconducting quantum interference device, optical absorbance and photoluminescence spectroscopy. A superparamagnetic response revealed from the magnetisation measurements of the as synthesised magnetite nanoparticles was retained even after the growth of the CdS shell. From luminescence and high resolution atomic force microscopy measurements, it is shown that the core–shell structures advantageously combine magnetic as well as fluorescence response with a tendency towards self-organization.

36 MATERIALS SCIENCE↗

Enhanced photovoltaic performance and stability with a new type of hollow 3D perovskite {en}FASnI 3

Perovskite solar cells have revolutionized the fabrication of solution-processable solar cells. The presence of lead in the devices makes this technology less attractive, and alternative metals in perovskites are being researched as suitable alternatives. We demonstrate a new type of tin-based perovskite absorber that incorporates both ethylenediammonium (en) and formamidinium (FA), forming new materials of the type {en}FASnI 3 . The three-dimensional ASnI 3 structure is stable only with methylammonium, FA, and Cs cations, and the bandgap can be tuned with solid solutions, such as ASnI 3-x Br x . We show that en can serve as a new A cation capable of achieving marked increases in the bandgap without the need for solid solutions. The en introduces a new bandgap tuning mechanism that arises from massive Schottky style defects. In addition, incorporation of the en cation in the structure markedly increases the air stability and improves the photoelectric properties of the tin-based perovskite absorbers. Our best-performing {en}FASnI 3 solar cell has the highest efficiency of 7.14%, which is achieved for a lead-free perovskite cell, and retains 96% of its initial efficiency after aging over 1000 hours with encapsulation. Our results introduce a new approach for improving the performance and stability of tin-based, lead-free perovskite solar cells.

36 MATERIALS SCIENCE↗

Speciation of CuCl and CuCl 2 Thiol-Amine Solutions and Characterization of Resulting Films: Implications for Semiconductor Device Fabrication

Thiol-amine mixtures are an attractive medium for the solution processing of semiconducting thin films because of their remarkable ability to dissolve a variety of metals, metal chalcogenides, metal salts, and chalcogens. However, very little is known about their dissolution chemistry. Electrospray ionization high-resolution tandem mass spectrometry and X-ray absorption spectroscopy were employed in this study to identify the species formed upon dissolution of CuCl and CuCl 2 in 1-propanethiol and n -butylamine. Copper was found to be present exclusively in the 1+ oxidation state for both solutions. The copper complexes detected include copper chlorides, copper thiolates, and copper thiolate chlorides. No complexes of copper with amines were observed. Additionally, alkylammonium ions and alkylammonium chloride adducts were observed. These findings suggest that the dissolution is initiated by proton transfer from the thiol to the amine, followed by coordination of the thiolate anions with copper cations. Interestingly, the mass and X-ray absorption spectra of the solutions of CuCl and CuCl 2 in thiol-amine were essentially identical. However, dialkyl disulfides were identified by Raman spectroscopy as an oxidation product only for the copper(II) solution, wherein copper(II) had been reduced to copper(I). Analysis of several thiol-amine pairs suggested that the dissolution mechanism is quite general. Finally, analysis of thin films prepared from these solutions revealed persistent chlorine impurities, in agreement with previous studies. These impurities are explained by the mass spectrometric finding that chloride ligands are not completely displaced by thiolates upon dissolution. These results suggest that precursors other than chlorides will likely be preferred for the generation of high-efficiency copper chalcogenide films, despite the reasonable efficiencies that have been obtained for films generated from chloride precursors in the past.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

LaSDI: Parametric Latent Space Dynamics Identification

Enabling fast and accurate physical simulations with data has become an important area of computational physics to aid in inverse problems, design-optimization, uncertainty quantification, and other various decision-making applications. This paper presents a data-driven framework for parametric latent space dynamics identification procedure that enables fast and accurate simulations. The parametric model is achieved by building a set of local latent space model and designing an interaction among them. An individual local latent space dynamics model achieves accurate solution in a trust region. By letting the set of trust region to cover the whole parameter space, our model shows an increase in accuracy with an increase in training data. Herein we introduce two different types of interaction mechanisms, i.e., point-wise and region-based approach. Both linear and nonlinear data compression techniques are used. We illustrate the framework of Latent Space Dynamics Identification (LaSDI) enable a fast and accurate solution process on various partial differential equations, i.e., Burgers’ equations, radial advection problem, and nonlinear heat conduction problem, achieving 0 (100)x speed-up and 0 (1)% relative error with respect to the corresponding full order models.

97 MATHEMATICS AND COMPUTING↗

Implementation of CMFD Acceleration Scheme in PROTEUS-MOC

The PROTEUS-MOC code is a three-dimensional (3D) transport code, which is being developed at Argonne National Laboratory under the DOE-NE's Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. It provides a fully consistent 3D discretization of the transport equation by combining the two-dimensional (2D) method of characteristics (MOC) for the planar direction with the discontinuous Galerkin method for the treatment of the axial variable. PROTEUS-MOC uses the unstructured finite element method (FEM) and thus allows the explicit representation of any extruded geometries. It also has a capability of massively parallel computation in energy group, angle, plane, and space using a top-level GMRES linear algebra solver. For parallel computation in space, it uses an unstructured domain decomposition by adapting METIS. The computational burden for direct heterogeneous core calculations based on unstructured geometries is excessive for practical reactor problems, and hence it is essential to implement an efficient acceleration scheme in PROTEUS-MOC. Recently, the coarse mesh finite difference (CMFD) method, which was originally applied to the nodal diffusion methods, has been successfully applied to the MOC transport solvers, resulting in a remarkable reduction in the number of fission source iterations. In addition, a modified CMFD method has been developed to overcome the limitation of the conventional CMFD that is applicable only to neutronics solvers with a conservative discretization. This CMFD method was derived to be consistent with the FEM, which is based on a nonconservative discretization. In this method, the neutron balance in each coarse mesh is enforced by introducing a pseudo absorption cross section (PAXS), and the well-established alternating solution process of CMFD and transport calculations is employed to accelerate source convergence. This modified CMFD acceleration scheme was adopted in PROTEUS-MOC to accelerate the fission source iteration. Pin-cell and assembly based CMFD schemes have been implemented by defining individual pin cells or assemblies as a coarse mesh. For this, an algorithm to map the finite elements to coarse meshes was developed, and the routines were developed to determine the coupling coefficients and PAXS of the CMFD equations from the transport solution. Preliminary performance tests were carried out using the C5G7 benchmark problem. This paper presents the main features of this CMFD acceleration scheme and the preliminary test results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Platinum (II) azatetrabenzoporphyrins for near-infrared organic light emitting diodes

In this paper, we describe a series of platinum (II) azatetrabenzoporphyrin emitters for near-infrared (NIR) organic light emitting diode (OLED) applications. Platinum (II) aza-triphenyltetrabenzoporphyrin (PtNTBP) results in a 72 nm shift in the photoluminescent (PL) emission spectrum to 842nm compared to 770nm of the platinum (II) tetraphenyltetrabenzoporphyrin (PtTPTBP). Also, the full width at half maximum of the emission spectrum of PtNTBP was significantly narrowed to 27 nm compared to 40nm for PtTPTBP. The multilayer devices fabricated by thermal vacuum evaporation process employing PtTPTBP, PtNTBP, and cis-PtN 2 TBP exhibit electroluminescent (EL) emission peak at 770 nm, 848 nm, and 846 nm with the peak external quantum efficiency (EQE) of 8.0%, 2.8%, and 1.5%, respectively. Even with the decrease in EQE of devices employing PtNTBP and cis-PtN 2 TBP compared with those employing PtTPTBP, the combination of the spectral narrowing and the bathochromic shift to lower energy EL emission demonstrates the promise of PtNTBP for NIR applications. In the meanwhile, the solution-processed single-layer device using PtNTBP demonstrates the EQE of 0.33% and the peak EL emission at 844 nm.

36 MATERIALS SCIENCE↗

Elliptic Volume Grid Generation for Viscous CFD Parametric Design Studies

This paper presents a robust method for the generation of zonal volume grids of design parametrics for aerodynamic configurations. The process utilizes simple algebraic techniques with parametric splines coupled with elliptic volume grid generation to generate isolated zonal grids for changes in body configuration needed to perform parametric design studies. Speed of the algorithm is maximized through the algebraic methods and reduced number of grid points to be regenerated for each design parametric without sacrificing grid quality and continuity within the volume domain. The method is directly applicable to grid reusability, because it modifies existing ow adapted volume grids and enables the user to restart the CFD solution process with an established flow field. Use of this zonal approach reduces computer usage time to create new volume grids for design parametric studies by an order of magnitude, as compared to current methods which require the regeneration of an entire volume grid. A sample configuration of a proposed Single Stage-to-Orbit Vehicle is used to illustrate an application of this method.

Alter, Stephen J.↗

Manipulating polymer composition to create low-cost, high-fidelity sensors for indoor CO2 monitoring

Abstract Carbon dioxide (CO 2 ) has been linked to many deleterious health effects, and it has also been used as a proxy for building occupancy measurements. These applications have created a need for low-cost and low-power CO 2 sensors that can be seamlessly incorporated into existing buildings. We report a resonant mass sensor coated with a solution-processable polymer blend of poly(ethylene oxide) (PEO) and poly(ethyleneimine) (PEI) for the detection of CO 2 across multiple use conditions. Controlling the polymer blend composition and nanostructure enabled better transport of the analyte gas into the sensing layer, which allowed for significantly enhanced CO 2 sensing relative to the state of the art. Moreover, the hydrophilic nature of PEO resulted in water uptake, which provided for higher sensing sensitivity at elevated humidity conditions. Therefore, this key integration of materials and resonant sensor platform could be a potential solution in the future for CO 2 monitoring in smart infrastructure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nature of the Organic Signature in Dust from the Interstellar Medium: Laboratory Analog Studies

We measured the infrared (IR) nu(sub CH) absorption bands around 3.4 microns (2800 - 3000 cm(sup -1) in large laboratory-grown magnesium oxide (MgO) and natural olivine single crystals that crystallized from CO/CO2/H2O saturated melts. These bands are very similar to those from many astronomical sources, such as from dust in the diffuse interstellar medium (ISM), from the outflow of evolved stars, etc., and they are characteristic of aliphatic -CH2- and -CH3 entities. In our laboratory single crystals the VCH bands arise from C-H entities that were introduced by a solid solution process, and that are imbedded in the mineral matrix in form of polyatomic C(sub n) entities with C atoms bonded to O and to H. Heating breaks the C-H bonds, causing hydrogen to disperse in the mineral matrix. C-H bonds are re-established rapidly during annealing. We propose that dust grains probably contain the same type of internal C(sub n)-H entities in solid matrix rather than an external organic layer covering the grain surfaces. Thermodynamical arguments show that the concentration of organics in solid solution in small grains can be comparable to that found in astronomical environments.

Freund, M. M.↗

‘Broken symmetries’ in macromolecular crystallography: phasing from unmerged data

Site-specific radiation damage and anisotropy of anomalous scattering can induce intensity differences in symmetry-related reflections. If the data are kept unmerged, these symmetry-breaking effects can become a source of phase information. The space-group symmetry of a crystal structure imposes a point-group symmetry on its diffraction pattern, giving rise to so-called symmetry-equivalent reflections. Instances in macromolecular crystallography are discussed in which the symmetry in reciprocal space is broken, i.e. where symmetry-related reflections are no longer equivalent. Such a situation occurs when the sample suffers from site-specific radiation damage during the X-ray measurements. Another example of broken symmetry arises from the polarization anisotropy of anomalous scattering. In these cases, the genuine intensity differences between symmetry-related reflections can be exploited to yield phase information in the structure-solution process. In this approach, the usual separation of the data merging and phasing steps is abandoned. The data are kept unmerged down to the Harker construction, where the symmetry-breaking effects are explicitly modelled and refined and become a source of supplementary phase information.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗