Search NASA⌕ Search

SEARCH · Search NASA

Results for “Parametric Capability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Parametric Time-Dependent Navier-Stokes Computations for a YAV-8B Harrier in Ground Effect

The Harrier Jump Jet has the distinction of being the only powered-lift aircraft in the free world to achieve operational status and to have flown in combat. This V/STOL aircraft can take-off and land vertically or utilize very short runways by directing its four exhaust nozzles towards the ground. Transition to forward flight is achieved by rotating these nozzles into a horizontal position. Powered-lift vehicles have certain advantages over conventional strike fighters. Their V/STOL capabilities allow for safer carrier operations, smaller carrier size, and quick reaction time for troop support. Moreover, they are not dependent on vulnerable land-based runways. The AV-8A Harrier first entered service in the British Royal Air Force (RAF) during 1969, and the U.S. Marine Corps (USMC) in 1971. The AV-8B was a redesign to achieve improved payload capacity, range, and accuracy. This modified design first entered service with the USMC and RAF in 1985. The success and unique capabilities of the Harrier has prompted the design of a powered-lift version of the Joint Strike Fighter (JSF). The flowfield for the Harrier near the ground during low-speed or hover flight operations is very complex and time-dependent. A sketch of this flowfield is shown. Warm air from the fan is exhausted from the front nozzles, while a hot air/fuel mixture from the engine is exhausted from the rear nozzles. These jets strike the ground and move out radially forming a ground jet-flow. The ambient freestream, due to low-speed forward flight or - headwind during hover, opposes the jet-flow. This interaction causes the flow to separate and form a ground vortex. The multiple jets also interact with each other near the ground and form an upwash or jet fountain, which strikes the underside of the fuselage. If the aircraft is sufficiently close to the ground, the inlet can ingest ground debris and hot gases from the fountain and ground vortex. This Hot Gas Ingestion (HGI) can cause a sudden loss of thrust (powered lift), and the vehicle may crash. The high-speed jet flow along the ground can also entrain the ambient flow, resulting in a low pressure region underneath the vehicle. The accompanied loss of lift is referred to as the suckdown effect. The ground vortex may also be highly unsteady, dramatically changing its size and position with time at low frequencies, e.g., 1 Hz.

Chaderjian, Neal M.↗

Modeling of fluid injection-induced fault reactivation using coupled fluid flow and mechanical interface model

The present study is aimed at developing a numerical model to reproduce coupled hydro-mechanical processes associated with fault reactivation by fluid injection in low permeability rock, as part of the DECOVALEX-2019 project Task B. We proposed a modeling approach for simulating the processes using the TOUGH-FLAC simulator, and modeled a fault reactivation experiment conducted at Mont Terri Rock Laboratory in Switzerland. The first step of the study involved benchmark calculations considering a simplified fault plane and geometry. Fluid flow along a fault was modeled using elements of aperture-sized thickness on the basis of Darcy's law and the cubic law in TOUGH2, whereas the mechanical behavior of a single fault was represented by zero-thickness interface elements in FLAC3D upon which a slip and/or separation is allowed. A methodology to connect a TOUGH2 volume element to a FLAC3D interface element was developed for handling the hydro-mechanical interactions on the fault during fluid injection. Two different fault models for describing the evolutions of hydraulic aperture by elastic fracture opening and failure-induced aperture increase were considered in the benchmark calculations. In the coupling process, the changes in geometrical features and hydrological properties induced by mechanical deformation were continuously updated. The transient responses of the fault and host rock to stepwise pressurization were examined during the simulation. The hydro-mechanical behavior, including the injection flow rate, pressure distribution around the borehole, stress conditions, and displacements in normal and shear directions were monitored in the surrounding rock and along the fault. The results of benchmark calculations suggest that the developed model reasonably represents the hydro-mechanical behavior of a fault and the surrounding rock. This modeling approach was applied to the fault reactivation experiment of the Mont Terri Rock Laboratory. In this interpretive modeling, a parametric study was conducted to examine the effects of input parameters regarding in situ stress and fault properties on the hydro-mechanical responses of the fault to water injection. Then, an optimal parameter set to reproduce the field experiment results was chosen by trial-and-error. The injection flow rate and pressure response during fault reactivation closely matched those obtained at the site, which indicates the capability of the model to appropriately capture the progressive pathway evolution during fault reactivation tests at the site. Finally, the anchor displacements were overestimated by the model, but a fair agreement was obtained in terms of the order of magnitude and the variation tendency.

58 GEOSCIENCES↗

A MACHINE-LEARNING METHOD TO INFER FUNDAMENTAL STELLAR PARAMETERS FROM PHOTOMETRIC LIGHT CURVES

A fundamental challenge for wide-field imaging surveys is obtaining follow-up spectroscopic observations: there are >10{sup 9} photometrically cataloged sources, yet modern spectroscopic surveys are limited to ∼few× 10{sup 6} targets. As we approach the Large Synoptic Survey Telescope era, new algorithmic solutions are required to cope with the data deluge. Here we report the development of a machine-learning framework capable of inferring fundamental stellar parameters (T {sub eff}, log g, and [Fe/H]) using photometric-brightness variations and color alone. A training set is constructed from a systematic spectroscopic survey of variables with Hectospec/Multi-Mirror Telescope. In sum, the training set includes ∼9000 spectra, for which stellar parameters are measured using the SEGUE Stellar Parameters Pipeline (SSPP). We employed the random forest algorithm to perform a non-parametric regression that predicts T {sub eff}, log g, and [Fe/H] from photometric time-domain observations. Our final optimized model produces a cross-validated rms error (RMSE) of 165 K, 0.39 dex, and 0.33 dex for T {sub eff}, log g, and [Fe/H], respectively. Examining the subset of sources for which the SSPP measurements are most reliable, the RMSE reduces to 125 K, 0.37 dex, and 0.27 dex, respectively, comparable to what is achievable via low-resolution spectroscopy. For variable stars this represents a ≈12%-20% improvement in RMSE relative to models trained with single-epoch photometric colors. As an application of our method, we estimate stellar parameters for ∼54,000 known variables. We argue that this method may convert photometric time-domain surveys into pseudo-spectrographic engines, enabling the construction of extremely detailed maps of the Milky Way, its structure, and history.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluation of Cooling Conditions for a High Heat Flux Testing Facility Based on Plasma-Arc Lamps

The new Irradiated Material Target Station (IMTS) facility for fusion materials at Oak Ridge National Laboratory (ORNL) uses an infrared plasma-arc lamp (PAL) to deliver incident heat fluxes as high as 27 MW/m 2 . The facility is being used to test irradiated plasma-facing component materials as part of the joint US-Japan PHENIX program. The irradiated samples are to be mounted on molybdenum sample holders attached to a water-cooled copper rod. Depending on the size and geometry of samples, several sample holders and copper rod configurations have been fabricated and tested. As a part of the effort to design sample holders compatible with the high heat flux (HHF) testing to be conducted at the IMTS facility, numerical simulations have been performed for two different water-cooled sample holder designs using the ANSYS FLUENT 14.0 commercial computational fluid dynamics (CFD) software package. The primary objective of this work is to evaluate the cooling capability of different sample holder designs, i.e. to estimate their maximum allowable incident heat flux values. 2D axisymmetric numerical simulations are performed using the realizable k-ε turbulence model and the RPI nucleate boiling model within ANSYS FLUENT 14.0. The results of the numerical model were compared against the experimental data for two sample holder designs tested in the IMTS facility. The model has been used to parametrically evaluate the effect of various operational parameters on the predicted temperature distributions. The results were used to identify the limiting parameter for safe operation of the two sample holders and the associated peak heat flux limits. The results of this investigation will help guide the development of new sample holder designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Melt spreading code assessment, modifications, and application to the EPR core catcher design.

The Evolutionary Power Reactor (EPR) is under consideration by various utilities in the United States to provide base load electrical production, and as a result the design is undergoing a certification review by the U.S. Nuclear Regulatory Commission (NRC). The severe accident design philosophy for this reactor is based upon the fact that the projected power rating results in a narrow margin for in-vessel melt retention by external cooling of the reactor vessel. As a result, the design addresses ex-vessel core melt stabilization using a mitigation strategy that includes: (1) an external core melt retention system to temporarily hold core melt released from the vessel; (2) a layer of 'sacrificial' material that is admixed with the melt while in the core melt retention system; (3) a melt plug in the lower part of the retention system that, when failed, provides a pathway for the mixture to spread to a large core spreading chamber; and finally, (4) cooling and stabilization of the spread melt by controlled top and bottom flooding. The overall concept is illustrated in Figure 1.1. The melt spreading process relies heavily on inertial flow of a low-viscosity admixed melt to a segmented spreading chamber, and assumes that the melt mass will be distributed to a uniform height in the chamber. The spreading phenomenon thus needs to be modeled properly in order to adequately assess the EPR design. The MELTSPREAD code, developed at Argonne National Laboratory, can model segmented, and both uniform and nonuniform spreading. The NRC is thus utilizing MELTSPREAD to evaluate melt spreading in the EPR design. MELTSPREAD was originally developed to support resolution of the Mark I containment shell vulnerability issue. Following closure of this issue, development of MELTSPREAD ceased in the early 1990's, at which time the melt spreading database upon which the code had been validated was rather limited. In particular, the database that was utilized for initial validation consisted of: (1) comparison to an analytical solution for the dam break problem, (2) water spreading tests in a 1/10 linear scale model of the Mark I containment by Theofanous et al., and (3) steel spreading tests by Suzuki et al. that were also conducted in a geometry similar to the Mark I. The objective of this work was to utilize the MELTSPREAD code to check the assumption of uniform melt spreading in the EPR core catcher design. As a starting point for the project, the code was validated against the worldwide melt spreading database that emerged after the code was originally written in the very early 1990's. As part of this exercise, the code was extensively modified and upgraded to incorporate findings from these various analytical and experiment programs. In terms of expanding the ability of the code to analyze various melt simulant experiments, the options to input user-specified melt and/or substrate material properties was added. The ability to perform invisicid and/or adiabatic spreading analysis was also added so that comparisons with analytical solutions and isothermal spreading tests could be carried out. In terms of refining the capability to carry out reactor material melt spreading analyses, the code was upgraded with a new melt viscosity model; the capability was added to treat situations in which solid fraction buildup between the liquidus-solidus is non-linear; and finally, the ability to treat an interfacial heat transfer resistance between the melt and substrate was incorporated. This last set of changes substantially improved the predictive capability of the code in terms of addressing reactor material melt spreading tests. Aside from improvements and upgrades, a method was developed to fit the model to the various melt spreading tests in a manner that allowed uncertainties in the model predictions to be statistically characterized. With these results, a sensitivity study was performed to investigate the assumption of uniform spreading in the EPR core catcher that addressed parametric variations in: (1) melt pour mass, (2) melt composition, (3) melt pour rate, (4) pour configuration (i.e., homogeneous vs. stratified metal-oxide phases), (5) melt temperature, (6) cavity condition (wet vs. dry), (7) spreading channel inclination angle, and finally (8) uncertainties in the melt viscosity correlation that are based on comparisons with the reactor material melt spreading database. Although differences were found in the rate of spreading and the degree to which the sacrificial concrete in the spreading room is ablated during the transients, in all cases the melt eventually (over a period of minutes) spreads to a uniform depth in the system.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Application of the control configured vehicle concept to a Space Shuttle configuration.

Potential benefits and limitations of using automatic feedback control systems to provide artificial stabilization, rather than depending on inherent aerodynamic stability are discussed. A conventionally designed Space Shuttle vehicle is used as a baseline. Study results are based on parametric evaluations of configuration changes and control logic concepts suitable for unstable vehicles. Study results show that destabilizing the vehicle by moving the wing forward and reducing vertical tail area reduces the weight of a typical fly-back Space Shuttle booster configuration by 5430 pounds with little or no degradation in control performance. This is accomplished by modifying the aerodynamic controls, but without increasing control surface rate capability or the amount of reaction control fuel carried.

Wawrzyniak, M. E.↗

An Exploratory Statistical Analysis of a Planet Approach-Phase Guidance Scheme Using Angular Measurements with Significant Error

An exploratory analysis of vehicle guidance during the approach to a target planet is presented. The objective of the guidance maneuver is to guide the vehicle to a specific perigee distance with a high degree of accuracy and minimum corrective velocity expenditure. The guidance maneuver is simulated by considering the random sampling of real measurements with significant error and reducing this information to prescribe appropriate corrective action. The instrumentation system assumed includes optical and/or infrared devices to indicate range and a reference angle in the trajectory plane. Statistical results are obtained by Monte-Carlo techniques and are shown as the expectation of guidance accuracy and velocity-increment requirements. Results are nondimensional and applicable to any planet within limits of two-body assumptions. The problem of determining how many corrections to make and when to make them is a consequence of the conflicting requirement of accurate trajectory determination and propulsion. Optimum values were found for a vehicle approaching a planet along a parabolic trajectory with an initial perigee distance of 5 radii and a target perigee of 1.02 radii. In this example measurement errors were less than i minute of arc. Results indicate that four corrections applied in the vicinity of 50, 16, 15, and 1.5 radii, respectively, yield minimum velocity-increment requirements. Thrust devices capable of producing a large variation of velocity-increment size are required. For a vehicle approaching the earth, miss distances within 32 miles are obtained with 90-percent probability. Total velocity increments used in guidance are less than 3300 feet per second with 90-percent probability. It is noted that the above representative results are valid only for the particular guidance scheme hypothesized in this analysis. A parametric study is presented which indicates the effects of measurement error size, initial perigee, and initial energy on the guidance requirements. Measurement error size significantly affects both guidance accuracy and velocity-increment expenditure. The initial trajectory, as given by its perigee and energy, affects the velocity-increment expenditure but not final guidance accuracy.

Friedlander, Alan L.↗

The Application of a Boundary Integral Equation Method to the Prediction of Ducted Fan Engine Noise

The prediction of ducted fan engine noise using a boundary integral equation method (BIEM) is considered. Governing equations for the BIEM are based on linearized acoustics and describe the scattering of incident sound by a thin, finite-length cylindrical duct in the presence of a uniform axial inflow. A classical boundary value problem (BVP) is derived that includes an axisymmetric, locally reacting liner on the duct interior. Using potential theory, the BVP is recast as a system of hypersingular boundary integral equations with subsidiary conditions. We describe the integral equation derivation and solution procedure in detail. The development of the computationally efficient ducted fan noise prediction program TBIEM3D, which implements the BIEM, and its utility in conducting parametric noise reduction studies are discussed. Unlike prediction methods based on spinning mode eigenfunction expansions, the BIEM does not require the decomposition of the interior acoustic field into its radial and axial components which, for the liner case, avoids the solution of a difficult complex eigenvalue problem. Numerical spectral studies are presented to illustrate the nexus between the eigenfunction expansion representation and BIEM results. We demonstrate BIEM liner capability by examining radiation patterns for several cases of practical interest.

Dunn, M. H.↗

Reinforcement Learning for Spacecraft Navigation & Environment Characterization in the Planar-Restricted Two-Body Problem

As science, exploration, and commercial space missions become increasingly complex, so does the need for efficient, autonomous, and integrated spacecraft navigation and operations techniques. Key operational functions, including data collection and transmission, environment characterization, systems constraints, human factors, and navigation, often are intertwined and conflicted. Deep Reinforcement Learning (DRL) offers a framework for addressing integrated spacecraft navigation and planning in an uncertain dynamical environment. The goal of this study is to evaluate the utility of DRL for integrated spacecraft navigation and planning. This is achieved by developing a simple environmental characterization training environment in the Planar-Restricted 2-Body Problem (PR2BP), establishing benchmarks and heuristic baselines, and designing a previously unstudied Markov Decision Process (MDP) formulation. This MDP formulation enables the spacecraft DRL agents to appropriately balance navigation and actuation capabilities. The resulting DRL-derived policy exceeds a random or untrained policy and meets or exceeds the level of performance of a heuristic without actuation. In the process, valuable intuition is gained about the problem with insight into how DRL methods could scale to increasingly more realistic scenarios, including net-work design and training architectures, efficient state space representations, and methods for encouraging exploration in a parametric action space, among others.

navigation↗

SPH Modeling of Biomass Granular Flow: Engineering Application in Hoppers and Augers

Numerical modeling of granular biomass material flow in handling operations is indispensable to decipher flow upsets, commonly manifested as clogging and jamming in hoppers and augers. With a computational tool developed based on smoothed particle hydrodynamics (SPH), we simulated the hopper flow and auger feeding of six granular biomass materials. The good agreement between the experimental and numerical flow rates demonstrated the capability of the developed SPH solver in modeling the complicated flow of granular biomass materials. Further, the impact of physical and numerical parameters is investigated, and the major results show that the hopper flow pattern is controlled by shear band evolution; hopper clogging is collectively influenced by the opening size, wall friction, and material packing, and the impact of material compressibility on the auger feed rate is minimal. These parametric studies validate the solver’s robustness in simulating biomass flow in handling equipment and demonstrate that the SPH computational tool can provide insights about granular flow mechanics to facilitate handling equipment design and optimize handling operations.

09 BIOMASS FUELS↗

Coupled magnetostructural continuum model for multiferroic BiFeO 3

Here, a continuum approach to study magnetoelectric multiferroic BiFeO 3 (BFO) is proposed. Our modeling effort marries the ferroelectric (FE) phase field method and micromagnetic simulations to describe the entire multiferroic order parameter sector (polarization, oxygen antiphase tilts, strain, and magnetism) self-consistently on the same time- and length scale. In this paper, we discuss our choice of FE and magnetic energy terms and demonstrate benchmarks against known behavior. We parametrize the lowest order couplings of the structural distortions against previous predictions from density functional theory calculations giving access to simulations of the FE domain wall (DW) topology. This allows us to estimate the energetic hierarchy and thicknesses of the numerous structural DWs. We then extend the model to the canted antiferromagnetic order and demonstrate how the FE domain boundaries influence the resulting magnetic DWs. We also highlight some capabilities of this model by providing two examples relevant for applications. We demonstrate spin-wave transmission through the multiferroic domain boundaries which identify rectification in qualitative agreement with recent experimental observations. As a second example of application, we model fully dynamical magnetoelectric switching, where we find a sensitivity on the Gilbert damping with respect to switching pathways. We envision that this modeling effort will set the basis for further work on properties of arbitrary 3D nanostructures of BFO (and related multiferroics) at the mesoscale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Many-Body Physics in the NISQ Era: Quantum Programming a Discrete Time Crystal

Recent progress in the realm of noisy intermediate-scale quantum (NISQ) devices represents an exciting opportunity for many-body physics by introducing new laboratory platforms with unprecedented control and measurement capabilities. We explore the implications of NISQ platforms for many-body physics in a practical sense: we ask which physical phenomena, in the domain of quantum statistical mechanics, they may realize more readily than traditional experimental platforms. While a universal quantum computer can simulate any system, the eponymous noise inherent to NISQ devices practically favors certain simulation tasks over others in the near term. As a particularly well-suited target, we identify discrete time crystals (DTCs), novel nonequilibrium states of matter that break time translation symmetry. These can only be realized in the intrinsically out-of-equilibrium setting of periodically driven quantum systems stabilized by disorder-induced many-body localization. While promising precursors of the DTC have been observed across a variety of experimental platforms—ranging from trapped ions to nitrogen-vacancy centers to NMR crystals—none have all the necessary ingredients for realizing a fully fledged incarnation of this phase, and for detecting its signature long-range spatiotemporal order. We show that a new generation of quantum simulators can be programmed to realize the DTC phase and to experimentally detect its dynamical properties, a task requiring extensive capabilities for programmability, initialization, and readout. Specifically, the architecture of Google’s Sycamore processor is a remarkably close match for the task at hand. We also discuss the effects of environmental decoherence, and how they can be distinguished from ‘internal’ decoherence coming from closed-system thermalization dynamics. Already with existing technology and noise levels, we find that DTC spatiotemporal order would be observable over hundreds of periods, with parametric improvements to come as the hardware advances.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sierra/RKPM: Current State and Applications

The Reproducing Kernel Particle Method (RKPM), a meshfree method, has been implemented in Sandia's Sierra/Solid Mechanics in a collaboration between Sandia and the University of California San Diego's Center for Extreme Events Research (UCSD/CEER). Meshfree methods, like RKPM, have an advantage over mesh-based methods, like the Finite Element Method (FEM), in applications where achieving or maintaining a quality mesh becomes burdensome or impractical. For example, using FEM for problems with very large deformations will result in poor element Jacobians which causes problems with the parametric mapping. RKPM constructs the approximation functions in the physical domain, circumventing the parametric mapping issue. Also, reconstructing the approximation functions at very large deformations is straight-forward. RKPM has an advantage over traditional meshfree methods such as Smoothed-Particle Hydrodynamics (SPH) due to its ability to reproduce linear or higher-order functions exactly. This removes the tensile instabilities that are present in SPH and allows preservation of angular momentum. The point of this memo is to explore the capabilities and limitations of the current implementation by testing it on three different applications: 1) a quasi-static ductile shearing problem 2) a dynamic concrete panel perforation problem and 3) a set of dynamic metal panel perforation problems. In summary, areas where RKPM appears to be a promising alternative to current methods have been identified. Also, outstanding inefficiencies and issues (bugs) with code are noted, ways to improve the capabilities using material from literature are mentioned and areas deserving of new research are highlighted.

42 ENGINEERING↗

Passive Stability on an Entry Vehicle to Enhance Crew Survival

The most desirable crew survival feature for an entry vehicle is probably a full coverage escape system. With full coverage escape, crew survival is maintained for a wide range of failures by the allowing the crew to escape from the failed vehicle and performing the entry to touchdown flight phase in an alternative system. However, there are considerable challenges in providing a separate entry capability, and for some programs, requiring full coverage escape could result in program cancellation. An alternative means of providing for crew survival if the flight control system fails is to design a return vehicle that can enter without active attitude control. A study was performed to assess the feasibility of performing a totally passive entry. Lift over drag has a major impact on performing a passive entry, so a parametric of three typical lift over drag concepts was performed. First an assessment of historical entry vehicles was completed. Second an assessment of end of mission entry trajectories and entry trajectories initiated from ascent abort profiles were made. Trajectories for a wide array of pitch, yaw, and roll rates were made. Third, six-degree-of freedom analyses of the entry were performed. FOP a truly passive return, the entry vehicle must trim in only the heat shield forward orientation. An assessment of the effect of center of gravity placement to achieve this orientation was made.

Deger, Daniel J.↗

Flood hazard studies in Central Texas using orbital and suborbital remote sensing machinery

Central Texas is subject to infrequent, unusually intense rainstorms which cause extremely rapid runoff from drainage basins developed on the deeply dissected limestone and marl bedrock of the Edwards Plateau. One approach to flood hazard evaluation in this area is a parametric model relating flood hydrograph characteristics to quantitative geomorphic properties of the drainage basins. The preliminary model uses multiple regression techniques to predict potential peak flood discharge from basin magnitude, drainage density, and ruggedness number. After mapping small catchment networks from remote sensing imagery, input data for the model are generated by network digitization and analysis by a computer assisted routine of watershed analysis. The study evaluated the network resolution capabilities of the following data formats: (1) large-scale (1:24,000) topographic maps, employing Strahler's "method of v's," (2) standard low altitude black and white aerial photography (1:13,000 and 1:20,000 scales), (3) NASA - generated aerial infrared photography at scales ranging from 1:48,000 to 1:123,000, and (4) Skylab Earth Resources Experiment Package S-190A and S-190B sensors (1:750,000 and 1:500,000 respectively).

Baker, V. R.↗

Moment method with isoparametric elements for three-dimensional anisotropic scatterers

A novel method for computing the frequency-domain electromagnetic fields scattered from, and penetrating into, arbitrarily shaped, three-dimensional, lossy, inhomogeneous anisotropic scatters is presented. The method is based on a general volume integrodifferential formulation of the scattering problem and consists of the numerical solution of the coupled integral equations by the moment method and point matching. The numerical model of the scatterer is obtained by parametric volume elements, and the basis functions used to represent the field within each element are the same used in the finite-element method. Element integration problems due to the singular kernel of the integral equations are treated in some detail. Numerical results for both the isotropic and the anisotropic spherical scatterer are presented, including comparisons with results obtained by different numerical methods for the isotropic cases considered. The capability of the numerical code presented to deal with cases where the material parameters of the scatterer are given by singular matrices is discussed for two particular examples.

Graglia, Roberto D.↗

Development and case study of the liquid desiccant system module in sorption system simulation program (SorpSim)

Liquid desiccant systems (LDS) have recently seen an increase in research interest as they can utilize low-grade heat resources and separate the sensible and latent cooling loads by efficiently removing moisture in the air without cooling it to the dew point. Yet, simulation and analysis of LDS had remained complex and demanding due to the limited resources of LDS simulation tools. This work presents the new LDS module developed in the Sorption system Simulation program (SorpSim), which is an open-source and flexible platform for steady-state simulation and analysis of various sorption systems. First, the new LDS module containing a finite-difference model and an effectiveness-NTU model for the heat and mass transfer in LDS dehumidifier/regenerator component was introduced. Then the simulation results of the new module were verified using data from the literature. Lastly, a case study was carried out in SorpSim where an LDS cycle was built and simulated using the new module. The impacts of design and operating parameters on the simulated LDS performance were investigated. The parametric study revealed that a high source temperature improved moisture removal rate (MRR) but reduced the system coefficient of performance (COP); the COP increased monotonically with the desiccant solution recirculation ratio, while the MRR peaked at a ratio of 85%; and an internal solution heat exchanger with UA of 800 W/K was found to be sufficient for optimal performance under high recirculation ratios. The case study demonstrated the LDS module’s capability to facilitate the analysis of LDS design and operation. The LDS module can be further coupled with other component models in SorpSim to simulate and analyze various liquid-desiccant-based systems.

42 ENGINEERING↗

Efficient generation of single and entangled photons on a silicon photonic integrated chip

We present a protocol for generating on-demand, indistinguishable single photons on a silicon photonic integrated chip. The source is a time-multiplexed spontaneous parametric down-conversion element that allows optimization of single-photon versus multiphoton emission while realizing high output rate and indistinguishability. We minimize both the scaling of active elements and the scaling of active element loss with multiplexing. We then discuss detection strategies and data processing to further optimize the procedure. We simulate an improvement in single-photon-generation efficiency over previous time-multiplexing protocols, assuming existing fabrication capabilities. We then apply this system to generate heralded Bell states. The generation efficiency of both nonclassical states could be increased substantially with improved fabrication procedures.

74 ATOMIC AND MOLECULAR PHYSICS↗