Search NASA⌕ Search

SEARCH · Search NASA

Results for “Performance Rating Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Porous NaTi2(PO4)3@C nanocubes as improved anode for sodium-ion batteries

Highlights: • Porous NaTi{sub 2}(PO{sub 4}){sub 3}@C nanocubes are synthesized. • Oleic acid is utilized as the carbon source. • NaTi{sub 2}(PO{sub 4}){sub 3}@C is to be measured at 0.01–3 V for SIBs. • NaTi{sub 2}(PO{sub 4}){sub 3}@C achieves 201 mAh g{sup −1} at 100 mA g{sup −1} after 100 cycles. • NaTi{sub 2}(PO{sub 4}){sub 3}@C delivers 140 mAh g{sup −1} at 1 A g{sup −1} for 1000 times. - Abstract: The NASICON-type NaTi{sub 2}(PO{sub 4}){sub 3} has drawn much attention as anode material for sodium-ion batteries owing to its stable structural characteristics and low cost. Nevertheless, the insulating property of NaTi{sub 2}(PO{sub 4}){sub 3} and the high working potential of about 2.1 V vs. Na{sup +}/Na lead to its poor cycling stability, low rate performance as well as inferior capacity. In this work, we synthesize the porous NaTi{sub 2}(PO{sub 4}){sub 3}@C nanocubes by hydrothermal method and a subsequent coating process with using oleic acid as the carbon source. When utilized as the anode for sodium-ion battery in the voltage range between 0.01 V and 3.0 V, The as-synthesized porous NaTi{sub 2}(PO{sub 4}){sub 3}@C nanocubes deliver a discharge capacity of 201 mAh·g{sup −1} at the current density of 100 mA g{sup −1} after 100 cycles. Additionally, the reserved capacity of 140 mAh·g{sup −1} could be achieved at the current density of 1 A g{sup −1} after 1000 cycles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Role of Accelerated Burnup Irradiation Testing in Support of Accelerated Fuel Qualification

Accelerated fuel qualification has gained attention as a means to reduce the time needed to realize new nuclear fuel concepts and expand the operating windows of existing fuel forms. A key component of this approach is accelerated burnup irradiation testing. Although the concept of accelerated burnup has been familiar to the community for many decades, the specifics about how the increasing fission rate may be used as a qualification tool have not yet been elucidated. The present work provides a vision of how accelerated fission rate testing can enable accelerated fuel qualification. Technology readiness levels (TRLs) are reintroduced to demarcate the stages of traditional fuel qualification, and accelerated fuel qualification is presented in this context. The critical steps needed to achieve each TRL are reframed within the context of modern nuclear materials research and development, as revolutionary fuel concepts are more common than previous eras. The practical impacts of accelerated fuel qualification approaches as applied to contemporary fuel qualification efforts are illustrated. Examples are given to illustrate how accelerated burnup irradiations are being used currently and could be applied in the future to support qualification and licensure. Finally, outstanding challenges in the application of accelerated burnup methods to nuclear fuel qualification are summarized, with priority placed on understanding how fission rate impacts diffusion, microstructure evolution, and other critical mechanisms that dictate fuel performance.

Accelerated fuel qualification↗
DOE OSTI2019

Ab Initio Investigation of Charge Trapping Across the Crystalline- Si -Amorphous- Si O 2 Interface

Accurate microscopic description of the charge-trapping process from semiconductor to defects in the dielectric-oxide layer is of paramount importance for understanding many microelectronic devices such as complementary metal-oxide-semiconductor (CMOS) transistors, as well as electrochemical reactions. Unfortunately, most current microscopic descriptions of such processes are based on empirical models with parameters fitted to experimental device performance results or simplified approximations like the Wentzel-Kramers-Brillouin (WKB) method. Some critical questions are still unanswered, including: What controls the charge-hopping rate, the coupling strength between the defect level to semiconductor level, or the energy difference? How does the hopping rate decay with defect-semiconductor distance? What is the fluctuation of the defect level, especially in amorphous dielectrics? Many of these questions can be answered by ab initio calculations. However, to date, there are few ab initio studies for this problem mainly due to technical challenges from atomic-structure construction to large-system calculations. Here, using the latest advances in calculation methods and codes, we study the carrier-trapping problem using density-functional theory (DFT) based on the Heyd-Scuseria-Ernzerhof (HSE) exchange correlation functional. The valence bond random-switching method is used to construct the crystalline-Si-amorphous-SiO2 (c-Si/a-SiO2) interfacial atomic structure, and the HSE yields a band offset that agrees well with experiments. The hopping rate is calculated with the Marcus theory, and the hopping-rate dependences on the gate potential and defect distances are revealed, as well as the range of fluctuation results from amorphous structural variation. We also analyze the result with the simple WKB model and find a major difference in the description of the coupling constant decay with the defect-semiconductor distance. Our results provide the ab initio simulation insights for this important carrier-trapping process for device operation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Neoadjuvant Chemotherapy and Nipple-Sparing Mastectomy: Timing and Postoperative Complications

Background: As the demand for nipple-sparing mastectomy (NSM) increases and surgeons expand the eligibility criteria, a subset of patients may become candidates following neoadjuvant chemotherapy (NACT). However, the impact of NACT on postoperative complications remains unclear as the current literature is discordant. Methods: A single-institution, retrospective chart review was performed on patients undergoing NSM from 1989 to 2017. Patient demographics, surgical intervention, systemic treatment, and complication rates were collected. Primary outcomes were 30-day postoperative complications, including nipple-areolar necrosis, skin flap necrosis, infection, wound dehiscence, hematoma, and seroma. Secondary outcomes included characterization of the timing between chemotherapy and surgical intervention, and the impact on complication rates. Each breast was considered independently for analysis, and breasts undergoing either NACT or primary surgery (PS) were compared. Results: Of the 832 breasts included, 88 (10.6%) received NACT and 744 (89.4%) underwent PS. Baseline complication rates were not significantly different between the NACT group and the PS group (5.7% vs. 10.6%; p = 0.119). When controlling for age, body mass index (BMI), smoking, and prior radiation, NACT was not a predictor of complications. Time from completion of NACT to PS occurred at a median of 40.5 days (interquartile range 31.3–55.3), and decreased intervals were not associated with increased complication rates. Conclusions: Postoperative complications following NSM in patients completing NACT are comparable with those receiving PS. Patients undergoing NACT do not have a significantly increased risk of necrosis, unintended reoperations, or nipple loss. NACT should not be considered a contraindication for NSM.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2020

Designing Catalysts for Dehydrogenation of Methane for Reducing Greenhouse Gas during Natural Gas Extraction

Catalytic conversion of methane (CH 4 ) into useful products is critical for maximizing the utility of natural gas output and for reducing green house gas release associated with flaring (burning off CH 4 at natural gas extraction sites). One particular useful technique is methane dry reforming (DRM), which involves the chemical reaction of CH 4 with carbon dioxide (CO 2 ) to generate carbon monoxide (CO), hydrogen gas (H 2 ), and subsequently other useful products. New and improved catalysts are required to facilitate efficient dry methane reforming. In this report, we apply the Density Functional Theory (DFT) computational technique to investigate a catalyst consisting of small nickel clusters (Ni n , n < 10) on ceria (Ce0 2 (111) surfaces) support. One main thrust of this project is to study the initial CH 4 and CO 2 reactions with the catalyst. We find that CH 4 exhibits barrierless reactive adsorption on to the catalyst. In order words, this step is likely not the rate-determining step. A second thrust is to perform detailed studies of the catalyst itself and examine the role of oxygen vacancies. Using a specific DFT method and a hypothesis about the absence of the Ce(III) redox state, we obtain predictions about oxygen vacancies in good agreement with experimental observations.

03 NATURAL GAS↗
NASA NTRS1976

Acceleration effects on the performance of solid-propellant rocket motors

Some acceleration effects on rocket performance have been well publicized. The dynamic process, characterized by marked increases in 'localized' burning rate, produces excessive case heating, slag retention, pressure buildup, and/or internal flow alterations. Data are presented illustrating drastic effects at low accelerations for sustainer type propellants and its relevance to several recent failures. Normalized orientation dependence of rate augmentation appears coupled to acceleration level and base burning rate. Effects appear influenced by propellant composition. Predictions using subscale motor data show good agreement with observed performance for ground spin and flight tests. Subscale test methods and results are also discussed.

Lucy, M. H.↗
NASA NTRS1986

Simulating AOTV heating environment in an arc jet

The application of arc-jet facilities to the simulation of the combined radiative and convective heating environments calculated for AOTV return missions is presented. The AOTV mission requirement and design configuration determine the magnitude of the radiative and convective heating rates. This paper considers methods for obtaining radiation from the high temperature plasma in arc-jet flows. A computer code that predicts arc-heater performance was used to determine the effect of gas mixtures on arc-heater performance, with the intent of increasing the gas temperature and resultant radiative emission. Numerical radiation solutions were compared with direct measurements of the radiative intensity from the gas cap. Convective heating measurements were made as well. The arc-jet was operated at AOTV enthalpy and pressure levels for these measurements to assess the simulation capabilities for AOTV material development/testing. A parametric study is presented that defines the capability of the Interaction Heating Facility arc jet at Ames to simulate both the radiative and the convective heating for current AOTV configurations.

Balboni, J.↗
NASA NTRS1991

Establishing an evoked-potential vision-tracking system

This paper presents experimental evidence to support the feasibility of an evoked-potential vision-tracking system. The topics discussed are stimulator construction, verification of the photic driving response in the electroencephalogram, a method for performing frequency separation, and a transient-analysis example. The final issue considered is that of object multiplicity (concurrent visual stimuli with different flashing rates). The paper concludes by discussing several applications currently under investigation.

Skidmore, Trent A.↗
NASA NTRS2000

Electrokinetic remediation prefield test methods

Methods for determining the parameters critical in designing an electrokinetic soil remediation process including electrode well spacing, operating current/voltage, electroosmotic flow rate, electrode well wall design, and amount of buffering or neutralizing solution needed in the electrode wells at operating conditions are disclosed These methods are preferably performed prior to initiating a full scale electrokinetic remediation process in order to obtain efficient remediation of the contaminants.

Hodko, Dalibor↗
NASA NTRS2003

System for Testing Thermal Insulation of Pipes

An apparatus and method have been developed for measuring the rates of leakage of heat into pipes carrying liquids, the purpose of the measurements being to quantify the thermal performance of the insulation system. The apparatus is designed primarily for testing pipes used to carry cryogenic liquids, but can also be used for measuring the thermal performance of other insulated pipes or piping systems. The basic measurement principle is straightforward: The outer surface of the pipe insulation is maintained at a fixed warmer temperature. The interior of the pipe is maintained in a narrow fixed lower-temperature range by means of a regular liquid (e.g., water) that is pumped through the pipe at a known flow rate or a cryogenic liquid (e.g., nitrogen) that is saturated at atmospheric pressure and replenished until steady-state conditions are achieved. In the case of water or another liquid pumped through, the inlet and outlet temperatures are measured and heat-leak power is calculated as the mass flow rate of the liquid multiplied by the specific heat of the liquid multiplied by the inlet-to-outlet temperature rise of the liquid. In the case of liquid nitrogen or another low-temperature boiling liquid, the heat-leak power is calculated as the rate of boil-off multiplied by the latent heat of vaporization of the liquid. Then the thermal-insulation performance of the pipe system can be calculated as a function of the measured heat-leak power, the inner and outer boundary temperatures, and the dimensions of the pipe. The apparatus can test as many as three pipes simultaneously. The pipes can have inner diameters up to .15 cm and outer diameters up to .20 cm. The lengths of the pipes may vary; typical lengths are of the order of 18 m. Two thermal guard boxes . one for each end of the pipe(s) under test . are used to make the inlet and outlet fluid connections to the pipe(s) (see figure). The connections include bellows that accommodate thermal expansion and contraction of the pipes. The guard boxes and pipe(s) are positioned so that the pipe(s) slope upward from the upstream to the downstream end at an angle of at least 2 . The upward slope allows vapor bubbles to accumulate at the downstream end. The thermal guard boxes keep the ends of the pipes at the lower interior temperature to prevent spurious lengthwise leakage of heat into the pipes. It is important to prevent this spurious heat leakage because, if it were allowed to occur, it could contribute a large error in the measured heat-leak power. The upstream thermal guard box includes a heat exchanger through which liquid flowing into the pipe(s) is subcooled to the saturation temperature corresponding to the ambient pressure. Conversely, this heat exchanger can also be used to warm the flowing liquid to a desired fixed temperature. The apparatus includes a temperature control device that is placed around each pipe under test. Each device is operated under thermostatic control to maintain the outer surface of the pipe insulation at the specified test temperature. All measurements are recorded on a portable data-acquisition system.

Fesmire, James E.↗
DOE OSTI2025

Demand response of loads having thermal reserves

Systems and methods are described herein that improve grid performance by smoothing demand using thermal reserves. The smoothed demand can reduce peak loads as well as the ramp rate of demand that will otherwise require the use of inefficient, expensive generation sources. These improvements are tied to the selective switching on or off electrical loads that are coupled to thermal reserves, effectively using the thermal reserves as an energy storage mechanism. Historical data of past usage can be used to create load model and ensure that effects on customer comfort are minimized while still accomplishing the beneficial effects for the overall grid, which enables grid owners to both reduce their operational cost by avoiding expensive generation and improve system reliability by achieving more predictable power demand.

Ren, Wei↗
NASA NTRS1996

Cooling Duct Analysis for Transpiration/Film Cooled Liquid Propellant Rocket Engines

The development of a low cost space transportation system requires that the propulsion system be reusable, have long life, with good performance and use low cost propellants. Improved performance can be achieved by operating the engine at higher pressure and temperature levels than previous designs. Increasing the chamber pressure and temperature, however, will increase wall heating rates. This necessitates the need for active cooling methods such as film cooling or transpiration cooling. But active cooling can reduce the net thrust of the engine and add considerably to the design complexity. Recently, a metal drawing process has been patented where it is possible to fabricate plates with very small holes with high uniformity with a closely specified porosity. Such a metal plate could be used for an inexpensive transpiration/film cooled liner to meet the demands of advanced reusable rocket engines, if coolant mass flow rates could be controlled to satisfy wall cooling requirements and performance. The present study investigates the possibility of controlling the coolant mass flow rate through the porous material by simple non-active fluid dynamic means. The coolant will be supplied to the porous material by series of constant geometry slots machined on the exterior of the engine.

Micklow, Gerald J.↗
NASA NTRS1971

Lunar gravity derived from long-period satellite motion, a proposed method

A method was devised to determine the spherical harmonic coefficients of the lunar gravity field. The method consists of a two-step data reduction and estimation process. Pseudo-Doppler data were generated simulating two different lunar orbits. The analysis included the perturbing effects of the L1 lunar gravity field, the earth, the sun, and solar radiation pressure. Orbit determinations were performed on these data and long-period orbital elements were obtained. The Kepler element rates from these solutions were used to recover L1 lunar gravity coefficients. Overall results of the experiment show that lunar gravity coefficients can be accurately determined and that the method is dynamically consistent with long-period perturbation theory.

Ferrari, A. J.↗
DOE OSTI2019

Ductal Carcinoma In Situ with Microinvasion on Core Biopsy: Evaluating Tumor Upstaging Rate, Lymph Node Metastasis Rate, and Associated Predictive Variables

Introduction: The role of sentinel lymph node biopsy (SLNB) when ductal carcinoma in situ with microinvasion (DCISM) is identified on core biopsy is unclear. Objective: Our aim was to assess the upstage rate to invasive cancer and axillary lymph node metastasis in patients diagnosed with DCISM, and whether predictive variables could be identified that may help inform who would most likely benefit from a surgical axillary evaluation. Methods: We performed a retrospective review of 70 patients diagnosed with DCISM on core biopsy. Patients with concomitant or prior invasive cancer were excluded. Demographic, clinical, radiographic, histologic, and treatment data were collected. Fisher’s exact test and univariable and multivariable logistic regression were performed to identify variables that may be associated with tumor upstaging and nodal metastasis. Time-to-event distributions were summarized using the Kaplan–Meier method. Results: On final surgical pathology, 49 patients (70%) had a final diagnosis of DCISM or T1mi cancer, whereas 21 patients (30%) were upstaged to measurable invasive cancer (> 1 mm). One of 49 patients (2%) with DCISM on final pathology and 4 of 21 patients (19%) with measurable invasive cancer showed sentinel lymph node metastases. Conclusion: Although the upstage rate to measurable invasive cancer in our cohort of patients with DCISM on core biopsy was 30%, findings of a positive SLNB remain low at 7%. No predictive variables were identified to inform whether the routine practice of SLNB may be omitted in some patients with DCISM.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2020

Field-Aging Test Bed for Behind-the-Meter PV + Energy Storage

Small DC-coupled battery test systems are deployed at the National Renewable Energy Laboratory to evaluate capacity fade models and report on performance parameters such as round-trip efficiency under indoor and outdoor deployment scenarios. Initial commercial battery products include LG Chem RESU lithium-ion (Li-ion) and Avalon vanadium redox flow batteries. Adapting indoor lab-scale test methods to outdoor systems has challenges, including maintaining constant temperature and fully controlling batteries through standard discharge curves. Initial measurements show the Li-ion battery systems performing within expectations, near 85% round-trip efficiency. Initial lifetime modeling and measurements indicate that battery capacity could degrade by 20%-35% over 10 years at current rates.

14 SOLAR ENERGY↗
DOE OSTI2017

Thin film surface modifications of thin/tunable liquid/gas diffusion layers for high-efficiency proton exchange membrane electrolyzer cells

We present that a proton exchange membrane electrolyzer cell (PEMEC) is one of the most promising devices for high-efficiency and low-cost energy storage and ultrahigh purity hydrogen production. As one of the critical components in PEMECs, the titanium thin/tunable LGDL (TT-LGDL) with its advantages of small thickness, planar surface, straight-through pores, and well-controlled pore morphologies, achieved superior multifunctional performance for hydrogen and oxygen production from water splitting even at low temperature. Different thin film surface treatments on the novel TT-LGDLs for enhancing the interfacial contacts and PEMEC performance were investigated both in-situ and ex-situ for the first time. Surface modified TT-LGDLs with about 180 nm thick Au thin film yielded performance improvement (voltage reduction), from 1.6849 V with untreated TT-LGDLs to only 1.6328 V with treated TT-LGDLs at 2.0 A/cm 2 and 80°C. Furthermore, the hydrogen/oxygen production rate was increased by about 28.2% at 1.60 V and 80°C. The durability test demonstrated that the surface treated TT-LGDL has good stability as well. Finally, the gold electroplating surface treatment is a promising method for the PEMEC performance enhancement and titanium material protection even in harsh environment.

08 HYDROGEN↗
DOE OSTI2021

Synthetic Evaluation of Infrasonic Multipole Waveform Inversion

Acoustic source inversions estimate the mass flow rate of volcanic explosions or yield of chemical explosions and provide insight into potential source directionality. However, the limitations of applying these methods to complex sources and their ability to resolve a stable solution have not been investigated in detail. We perform synthetic infrasound waveform inversions that use 3-D Green’s functions for a variety of idealized and realistic deployment scenarios using both a flat plane and Yasur volcano, Vanuatu as examples. We investigate the ability of various scenarios to retrieve the input source functions and relative amplitudes for monopole and multipole (monopole and dipole) inversions. Infrasound waveform inversions appear to be a robust method to quantify mass flow rates from simple sources (monopole) using deployments of infrasound sensors placed around a source, but care should be taken when analyzing and interpreting results from more complex acoustic sources (multipole) that have significant directional components. In the examples we consider the solution is stable for monopole inversions with a signal-to-noise ratio greater than five and the dipole component is small. For most scenarios investigated, the vertical dipole component of the multipole explosion source is poorly constrained and can impact the ability to recover the other source term components. Because multipole inversions are ill-posed for many deployments, a low residual does not necessarily mean the proper source vector has been recovered. Synthetic studies are able to help investigate the limitations and place bounds on information that may be missing using monopole and multipole inversions for potentially directional sources.

58 GEOSCIENCES↗
DOE OSTI2018

Comparative Study of Finite Element Methods Using the Time-Accuracy-Size(TAS) Spectrum Analysis

We present a performance analysis appropriate for comparing algorithms using different numerical discretizations. By taking into account the total time-to-solution, numerical accuracy with respect to an error norm, and the computation rate, a cost-benefit analysis can be performed to determine which algorithm and discretization are particularly suited for an application. This work extends the performance spectrum model in for interpretation of hardware and algorithmic tradeoffs in numerical PDE simulation. As a proof-of-concept, popular finite element software packages are used to illustrate this analysis for Poisson’s equation.

97 MATHEMATICS AND COMPUTING↗