Search NASA⌕ Search

SEARCH · Search NASA

Results for “Proximate analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

Role of Alternative Energy Sources: Solar Thermal Technology Assessment [Slides]

This peer-reviewed analysis is one of a series of Technology Assessments of power production and evaluates the role of solar thermal power in the future energy portfolio of the U.S. Solar thermal power is evaluated with respect to resource base, growth potential, environmental profile, costs, barriers, risks, and expert opinions. Solar thermal power is viewed as a clean, renewable alternative to conventional fossil fuels for electricity generation. However, the resource base of solar thermal power is limited by several factors that inform the availability of direct sunlight at any given location. The high cost of solar collectors to support utility level output, water scarcity in areas of high solar potential, and lack of proximity of resources to population centers make it likely that high-quality solar thermal resources are expected to remain untapped for the foreseeable future.

14 SOLAR ENERGY↗
DOE OSTI2013

A LACK OF SHORT-PERIOD MULTIPLANET SYSTEMS WITH CLOSE-PROXIMITY PAIRS AND THE CURIOUS CASE OF KEPLER-42

Many Kepler multiplanet systems have planet pairs near low-order, mean-motion resonances. In addition, many Kepler multiplanet systems have planets with orbital periods less than a few days. With the exception of Kepler-42, however, there are no examples of systems with both short orbital periods and nearby companion planets while our statistical analysis predicts {approx}17 such pairs. For orbital periods of the inner planet that are less than three days, the minimum period ratio of adjacent planet pairs follows the rough constraint P{identical_to}P{sub 2}/P{sub 1}{approx}>2.3 (P{sub 1}/day){sup -2/3}. This absence is not due to a lack of planets with short orbital periods. We also show a statistically significant excess of small, single-candidate systems with orbital periods below three days over the number of multiple candidate systems with similar periods-perhaps a small-planet counterpart to the hot Jupiters.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2015

Failure Analysis Results and Corrective Actions Implemented for the EMU 3011 Water in the Helmet Mishap

During EVA (Extravehicular Activity) No. 23 aboard the ISS (International Space Station) on 07/16/2013 water entered the EMU (Extravehicular Mobility Unit) helmet resulting in the termination of the EVA (Extravehicular Activity) approximately 1-hour after it began. It was estimated that 1.5-L of water had migrated up the ventilation loop into the helmet, adversely impacting the astronauts hearing, vision and verbal communication. Subsequent on-board testing and ground-based TT and E (Test, Tear-down and Evaluation) of the affected EMU hardware components led to the determination that the proximate cause of the mishap was blockage of all water separator drum holes with a mixture of silica and silicates. The blockages caused a failure of the water separator function which resulted in EMU cooling water spilling into the ventilation loop, around the circulating fan, and ultimately pushing into the helmet. The root cause of the failure was determined to be ground-processing short-comings of the ALCLR (Airlock Cooling Loop Recovery) Ion Filter Beds which led to various levels of contaminants being introduced into the Filters before they left the ground. Those contaminants were thereafter introduced into the EMU hardware on-orbit during ALCLR scrubbing operations. This paper summarizes the failure analysis results along with identified process, hardware and operational corrective actions that were implemented as a result of findings from this investigation.

Steele, John↗
DOE OSTI2018

Developmental dynamics of stem starch accumulation in Sorghum bicolor

Sweet sorghums were identified that accumulate up to ~9% of their total stem dry weight as starch. Starch accumulated preferentially in stem pith parenchyma in close proximity to vascular bundles. Stem starch accumulated slowly between floral initiation and anthesis and more rapidly between anthesis and 43 days post-anthesis before declining in parallel with tiller outgrowth. Genes involved in stem starch metabolism were identified through phylogenetic approaches and RNA-seq analysis of Della stem gene expression during the starch accumulation phase of development. Genes differentially expressed in stems were identified that are involved in starch biosynthesis (i.e., AGPase SS/LS, starch synthases, starch-branching enzymes), degradation (i.e., glucan-water dikinase, β-amylase, disproportionating enzyme, alpha-glucan phosphorylase) and amyloplast sugar transport (glucose-6-P translocator). Transcripts encoding AGPase SS and LS subunits with plastid localization were differentially induced during stem starch accumulation indicating that ADP-glucose for starch biosynthesis is primarily generated in stem plastids. Cytosolic heteroglucan metabolism may play a role in stem sucrose/starch accumulation because genes encoding cytosolic forms of the disproportionating enzyme and alpha-glucan phosphorylase were induced in parallel with stem sucrose/starch accumulation. Information on the stem starch pathway obtained in this study will be useful for engineering sorghum stems with elevated starch thereby improving forage quality and the efficiency of biomass conversion to biofuels and bio-products.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Ablating Lgr5-expressing prostatic stromal cells activates the ERK-mediated mechanosensory signaling and disrupts prostate tissue homeostasis

The heterogeneity of the prostate stromal cells is widely appreciated but the functional implication remains incompletely understood. Using genetic lineage tracing and light-sheet imaging, we show that some fibroblast cells near the junction of the mouse proximal prostatic ducts and prostatic urethra highly express Lgr5. Genetic ablation of these anatomically restricted stromal cells, but not nonselective ablation of prostatic stromal cells, rapidly induces prostate epithelial turnover and dedifferentiation that are reversed following spontaneous restoration of the Lgr5 + stromal cells. RNA-Seq analysis implies that ablating the Lgr5 + stromal cells activates a mechanosensory response. We show that ablating the Lgr5 + stromal cells impairs the control of prostatic ductal outlet, increases prostate tissue stiffness, and activates the mitogen-activated protein kinase (MAPK). Suppressing MAPK overrides the increased epithelial proliferation. This study demonstrates that the Lgr5 + stromal cells regulate tissue homeostasis in a long-distance manner by maintaining anatomic integrity and implies that the cells near the transitional regions between organs likely control organ homeostasis by sustaining a balanced mechanoforce.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2016

How Large Should the QM Region Be in QM/MM Calculations? The Case of Catechol O -Methyltransferase

Hybrid quantum mechanical–molecular mechanical (QM/MM) simulations are widely used in studies of enzymatic catalysis. Until recently, it has been cost prohibitive to determine the asymptotic limit of key energetic and structural properties with respect to increasingly large QM regions. Here, leveraging recent advances in electronic structure efficiency and accuracy, we investigate catalytic properties in catechol O-methyltransferase, a prototypical methyltransferase critical to human health. Using QM regions ranging in size from reactants-only (64 atoms) to nearly one-third of the entire protein (940 atoms), we show that properties such as the activation energy approach within chemical accuracy of the large-QM asymptotic limits rather slowly, requiring approximately 500–600 atoms if the QM residues are chosen simply by distance from the substrate. This slow approach to asymptotic limit is due to charge transfer from protein residues to the reacting substrates. Our large QM/MM calculations enable identification of charge separation for fragments in the transition state as a key component of enzymatic methyl transfer rate enhancement. We introduce charge shift analysis that reveals the minimum number of protein residues (approximately 11–16 residues or 200–300 atoms for COMT) needed for quantitative agreement with large-QM simulations. The identified residues are not those that would be typically selected using criteria such as chemical intuition or proximity. These results provide a recipe for a more careful determination of QM region sizes in future QM/MM studies of enzymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Quantitative phase separation in multiferroic Bi{sub 0.88}Sm{sub 0.12}FeO{sub 3} ceramics via piezoresponse force microscopy

BiFeO{sub 3} (BFO) is a classical multiferroic material with both ferroelectric and magnetic ordering at room temperature. Doping of this material with rare-earth oxides was found to be an efficient way to enhance the otherwise low piezoelectric response of unmodified BFO ceramics. In this work, we studied two types of bulk Sm-modified BFO ceramics with compositions close to the morphotropic phase boundary (MPB) prepared by different solid-state processing methods. In both samples, coexistence of polar R3c and antipolar P{sub bam} phases was detected by conventional X-ray diffraction (XRD); the non-polar P{sub nma} or P{sub bnm} phase also has potential to be present due to the compositional proximity to the polar-to-non-polar phase boundary. Two approaches to separate the phases based on the piezoresponse force microscopy measurements have been proposed. The obtained fractions of the polar and non-polar/anti-polar phases were close to those determined by quantitative XRD analysis. The results thus reveal a useful method for quantitative determination of the phase composition in multi-phase ceramic systems, including the technologically most important MPB systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cryo-EM structures of DNA-free and DNA-bound BsaXI: architecture of a Type IIB restriction–modification enzyme

Abstract We have determined multiple cryogenic electron microscopy (cryo-EM) structures of the Type IIB restriction–modification enzyme BsaXI. Such enzymes cleave DNA on both sides of their recognition sequence and share features of Types I, II, and III restriction systems. BsaXI forms a heterotrimeric (RM)2S assemblage in the presence and absence of bound DNA. Two unique structural motifs—a multi-helical “knob” and a long antiparallel double-helical “paddle”—are involved in DNA binding and cleavage. Binding of the DNA target triggers a large conformational change from an ‘open’ to ‘closed’ configuration, resulting in a mixture of two different conformations with respect to the positioning of the S subunit and its target recognition domains on the enzyme’s bipartite DNA target site. Structure-guided mutagenesis studies implicated two clusters of residues in the RM subunit as being critical for DNA cleavage, both are located proximal to a DNA cleavage site. One corresponds to a canonical PD-(D/E)xK endonuclease site in the N-terminal endonuclease domain, while the other corresponds to residues clustered within the paddle motif (near to the C-terminal end of the RM subunit). This analysis facilitates a comparison of three potential mechanisms by which such enzymes cleave DNA on each side of the bound target.

Shen, Betty W.↗
DOE OSTI2019

Compton profile of VO 2 across the metal-insulator transition: Evidence of a non-Fermi liquid metal

Many-body diffusion Monte Carlo is used to obtain the first-principles momentum distribution and Compton profile of vanadium dioxide. Our results for the Compton profile are in good agreement with the experimental values, and we show that good qualitative agreement in the scaled Compton profile difference across the monoclinic to rutile phase transition depends on an accurate description of electron correlation. The electron momentum distribution enables new insights into the metal-insulator phase transition. For example, the probability for electron scattering in the proximity of the Fermi surface (forward scattering) is suppressed in the vanadium chain direction (rutile c axis) but enhanced in perpendicular directions. However, along the c axis we observe an increase at ~2k F in the momentum distribution, which is characteristic for Friedel oscillations (backscattering). Our analysis of the momentum distribution supports experimentally observed anisotropies and provides an explanation for the anomalously low electronic thermal conductivity observed recently in the metallic phase. Furthermore, our results indicate non-Fermi liquid behavior as well as quasi-one-dimensional Friedel oscillations in the metallic rutile phase, which is reminiscent of a Tomanaga-Luttinger liquid with impurities.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Spatiotemporal Analyses of Groundwater and Shoreline Cr(VI) Concentrations in the 100 Areas at Hanford

Cleanup efforts have been ongoing since the late 1990s to remediate contaminated waste sites and groundwater in the 100 Areas at the U.S. Department of Energy (DOE) Hanford Site. One of the primary contaminants of concern is hexavalent chromium (Cr(VI)), which was used as a corrosion inhibitor in cooling water for nuclear reactors that formerly operated along the shoreline of the Columbia River. Cleanup efforts have included 1) removal, treatment (as needed), and disposal of contaminated sediments; 2) in situ redox manipulation as a permeable reactive barrier; 3) pump-and-treat; 4) soil flushing; and 5) monitored natural attenuation. DOE’s annual groundwater monitoring reports document the significant reductions in Cr(VI) plume areas that have occurred over the past 10 years or more as a result of these cleanup efforts. The Record of Decision for the 100-HR-3 operable unit specified a cleanup level (CUL) for Cr(VI) in groundwater of 48 µg/L to protect human receptors, and a surface water CUL of 10 µg/L to protect aquatic organisms in the Columbia River. The Record of Decision did not specify point-of-compliance locations for the surface water CUL. Data for 2019 from the six groundwater operable units (OUs) in the 100 Areas indicate that the 48 μg/L groundwater CUL has been achieved in 100% of the wells in the 100-BC and 100-NR OUs, and in 89- 97% of the wells in the other OUs (100-KR, 100-HR-D, 100-HR-H, 100-FR). Data for 2019 indicate that 100% of the aquifer tubes monitored for Cr(VI) in the 100 Areas have concentrations below the 48 μg/L groundwater CUL. However, the 10 μg/L standard has not yet been consistently achieved for both inland groundwater monitoring wells and shoreline aquifer tubes. This report describes a series of data analyses performed to identify consistent relationships, if any, between inland well and shoreline Cr(VI) concentrations within the 100 Areas. To this end, select monitoring data for Cr(VI) measured in groundwater and aquifer tubes at the 100 Areas were analyzed for a 10-year period—2010 to 2019. Relationships between inland groundwater plumes and surface-water points of discharge in and along the Columbia River were examined through several analyses that included inland well and aquifer tube concentrations as a function of distance from the shoreline, evaluation of cumulative probability plots, trend analysis, correlation analysis, cluster analysis, and identification of plume trajectories for each of the 100 Areas. The analyses did not identify consistent relationships between inland groundwater Cr(VI) concentrations and shoreline concentrations within the 100 Areas due to several confounding factors influencing groundwater flow directions and Cr(VI) concentrations. The proximity of groundwater Cr(VI) plumes to the river, and the highly dynamic nature of the river, influence the transport behavior of the plumes and create challenges for quantifying attenuation of Cr(VI) between the inland monitoring wells and shoreline concentrations. Other factors contributing to temporal and spatial Cr(VI) concentrations, as supported by some of the data analyses, include the presence of vadose zone sources, variable sorption behavior, and complexities associated with Cr(VI) mass transfer between the upper and lower aquifers and their interactions with the river. Hence, monitoring to assess compliance with target CULs will need to be determined for each area individually since several factors influence Cr(VI) concentrations in the 100 Areas.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1985

Hydraulic induced instability on a vertical service

The case history contained provides insight toward the mechanical and hydraulic behavior of a vertical pump. It clearly demonstrates the need for measurements on the rotor at or near the impeller area. The results are reported of an analysis on a service water pump. This pump is typical of the water pumps used throughout the power generation industry. Although little is known of the mechanical behavior of vertical pumps because of difficulty in modeling the rotor system, recent developments in the application of submersible proximity transducers have made possible the measurement of pump dynamics under operating conditions. The purpose of this study was to determine the proper selection and installation of vibration-monitoring transducers as well as to measure the effects of imbalance, misalignment, and hydraulics on the performance and reliability of vertical pumps. In addition, the cause of shaft failures on this pump was to be determined.

Bosmans, R. F.↗
NASA NTRS1991

An investigation of the detection of tornadic thunderstorms by observing storm top features using geosynchronous satellite imagery

The number of tornado outbreak cases studied in detail was increased from the original 8. Detailed ground and aerial studies were carried out of two outbreak cases of considerable importance. It was demonstrated that multiple regression was able to predict the tornadic potential of a given thunderstorm cell by its cirrus anvil plume characteristics. It was also shown that the plume outflow intensity and the deviation of the plume alignment from storm relative winds at anvil altitude could account for the variance in tornadic potential for a given cell ranging from 0.37 to 0.82 for linear to values near 0.9 for quadratic regression. Several predictors were used in various discriminant analysis models and in censored regression models to obtain forecasts of whether a cell is tornadic and how strong tornadic it could be potentially. The experiments were performed with the synoptic scale vertical shear in the horizontal wind and with synoptic scale surface vorticity in the proximity of the cell.

Anderson, Charles E.↗
NASA NTRS1991

Free-space laser communication technologies III; Proceedings of the Meeting, Los Angeles, CA, Jan. 21, 22, 1991

The present volume on free-space laser communication technologies discusses system analysis, performance, and applications, pointing, acquisition, and tracking in beam control, laboratory demonstration systems, and transmitter and critical component technologies. Attention is given to a space station laser communication transceiver, meeting intersatellite links mission requirements by an adequate optical terminal design, an optical approach to proximity-operations communications for Space Station Freedom, and optical space-to-ground link availability assessment and diversity requirements. Topics addressed include nonmechanical steering of laser beams by multiple aperture antennas, a free-space simulator for laser transmission, heterodyne acquisition and tracking in a free-space diode laser link, and laser terminal attitude determination via autonomous star tracking. Also discussed are stability considerations in relay lens design for optical communications, liquid crystals for lasercom applications, and narrowband optical interference filters.

Begley, David L.↗
NASA NTRS2006

Detection of a Hot Binary Companion of eta Carinae

A hot companion of eta Carinae has been detected using high resolution spectra (905 - 1180 A) obtained with the Far Ultraviolet Spectroscopic Explorer (FUSE) satellite. Observations were obtained at two epochs of the 2024-day orbit: 2003 June during ingress to the 2003.5 X-ray eclipse and 2004 April several months after egress. These data show that essentially all the far-UV flux from eta Car shortward of Lyman alpha disappeared at least two days before the start of the X-ray eclipse (2003 June 29), implying that the hot companion, eta Car B, was also eclipsed by the dense wind or extended atmosphere of eta Car A. Analysis of the far-UV spectrum shows that eta Car B is a luminous hot star. N II 1084-1086 emission disappears at the same time as the far-UV continuum, indicating that this feature originates from eta Car B itself or in close proximity to it. The strong N II emission also raises the possibility that the companion star is nitrogen rich. The observed FUV flux levels and spectral features, combined with the timing of their disappearance, is consistent with eta Carinae being a massive binary system

Sonnebom, G.↗
NASA NTRS2006

Detection of a Hot Binary Companion of eta Carinae

A hot companion of eta Carinae has been detected using high resolution spectra (905 - 1 180 Angsroms) obtained with the Far Ultraviolet Spectroscopic Explorer (FUSE) satellite. Observations were obtained at two epochs of the 2024-day orbit: 2003 June during ingress to the 2003.5 X-ray eclipse and 2004 April several months after egress. These data show that essentially all the far-UV flux from eta Car shortward of Lyman alpha disappeared at least two days before the start of the X-ray eclipse (2003 June 29), implying that the hot companion, eta Car By was also eclipsed by the dense wind or extended atmosphere of eta Car A. Analysis of the far-UV spectrum shows that eta Car B is a luminous hot star. N II 1084-1086 emission disappears at the same time as the far-UV continuum, indicating that this feature originates from eta Car B itself or in close proximity to it. The strong N II emission also raises the possibility that the companion star is nitrogen rich. The observed FUV flux levels and spectral features, combined with the timing of their disappearance, are consistent with eta Carinae being a massive binary system.

Sonneborn, G.↗
NASA NTRS2012

Trajectory Control of Rendezvous with Maneuver Target Spacecraft

In this paper, a nonlinear trajectory control algorithm of rendezvous with maneuvering target spacecraft is presented. The disturbance forces on the chaser and target spacecraft and the thrust forces on the chaser spacecraft are considered in the analysis. The control algorithm developed in this paper uses the relative distance and relative velocity between the target and chaser spacecraft as the inputs. A general formula of reference relative trajectory of the chaser spacecraft to the target spacecraft is developed and applied to four different proximity maneuvers, which are in-track circling, cross-track circling, in-track spiral rendezvous and cross-track spiral rendezvous. The closed-loop differential equations of the proximity relative motion with the control algorithm are derived. It is proven in the paper that the tracking errors between the commanded relative trajectory and the actual relative trajectory are bounded within a constant region determined by the control gains. The prediction of the tracking errors is obtained. Design examples are provided to show the implementation of the control algorithm. The simulation results show that the actual relative trajectory tracks the commanded relative trajectory tightly. The predicted tracking errors match those calculated in the simulation results. The control algorithm developed in this paper can also be applied to interception of maneuver target spacecraft and relative trajectory control of spacecraft formation flying.

Zhou, Zhinqiang↗
NASA NTRS2020

Development of a Daily GRACE Mascon Solution for Terrestrial Water Storage

The Gravity Recovery and Climate Experiment (GRACE) and GRACE-Follow On missions have provided a global history of terrestrial water storage changes since 2002. Traditional GRACE products resolve monthly time-variable gravity at spatial resolutions of 300-500 km, with many recent efforts focusing on regularized mass concentration (mascon) solutions to better resolve signals spatially. However, monthly resolution inhibits the applicability of GRACE to investigations of sub-monthly signals. This study presents a new daily mass change solution estimated as deviations from the NASA Goddard Space Flight Center (GSFC) converged monthly mascon product and quantifies the fundamental trade-off between temporal and spatial resolution in GRACE-only solutions. As an iteration of the GSFC product, this daily solution represents a mixing of monthly information at higher relative spatial resolution with daily information at lower relative spatial resolution, resolving each temporal scale at the best resolution achievable without requiring hydrological model dependencies in the estimation. The resolution of the daily mascons is 300-400 km at high latitudes and 600-1,000 km lower, depending on each daily orbital track and the proximity of each mascon to constraint region boundaries (e.g., coastlines). Through simulations and model comparisons, we demonstrate that daily signals over areas larger than 400,000 km(2) are recoverable, with basins larger than 800,000 km(2) exhibiting strong signal recovery relative to leakage. This analysis establishes baselines for daily signal recovery from GRACE in the context of longer time scale solutions, characterizes leakage inherent in daily GRACE information, and creates new opportunities for applying GRACE to investigations of sub-monthly signals.

M. J. Croteau↗
NASA NTRSDate not supplied

An Overview of NASA Langley Low-Speed CFD Contributions to the Space Launch System Program

In this review paper, low-speed computational work from NASA Langley in support of the Space Launch System (SLS) is discussed. This information includes both historic and present efforts with the Kestrel CFD solver. The low-speed aerodynamics of SLS is highly complex and analysis of the unsteady flowfield requires significant computational efforts. The SLS mission profile varies from the vehicle static on the launch pad through high-speed ascent, and this paper focuses on the prelaunch as well as liftoff and transition portions of the flight both in proximity to the launch tower and in isolation. High-alpha conditions, as large as 90~deg, result in a flowfield dominated by massive, large-scale flow separation and asymmetric vortices. High-fidelity solutions require an unsteady computational formulation to accurately capture the aerodynamics of the vehicle. A detailed discussion of the computational approach is presented, followed by key efforts to support the program.

Brent W Pomeroy↗