Search NASA⌕ Search

SEARCH · Search NASA

Results for “SCALE MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

A genome-scale metabolic model for the denitrifying bacterium Thauera sp. MZ1T accurately predicts degradation of pollutants and production of polymers

The denitrifying bacterium Thauera sp . MZ1T, a common member of microbial communities in wastewater treatment facilities, can produce different compounds from a range of carbon (C) and nitrogen (N) sources under aerobic and anaerobic conditions. In these different conditions, Thauera modifies its metabolism to produce different compounds that influence the microbial community. In particular, Thauera sp . MZ1T produces different exopolysaccharides with floc-forming properties, impacting the physical disposition of wastewater consortia and the efficiency of nutrient assimilation by the microbial community. Under N-limiting conditions, Thauera sp . MZ1T decreases its growth rate and accelerates the accumulation of polyhydroxyalkanoate-related (PHA) compounds including polyhydroxybutyrate (PHB), which plays a fundamental role as C and energy storage in this β-proteobacterium. However, the metabolic mechanisms employed by Thauera sp . MZ1T to assimilate and catabolize many of the different C and N sources under aerobic and anaerobic conditions remain unknown. Systems biology approaches such as genome-scale metabolic modeling have been successfully used to unveil complex metabolic mechanisms for various microorganisms. Here, we developed a comprehensive metabolic model (M-model) for Thauera sp . MZ1T ( i Thauera861), consisting of 1,744 metabolites, 2,384 reactions, and 861 genes. We validated the model experimentally using over 70 different C and N sources under both aerobic and anaerobic conditions. i Thauera861 achieved a prediction accuracy of 95% for growth on various C and N sources and close to 85% for assimilation of aromatic compounds under denitrifying conditions. The M-model was subsequently deployed to determine the effects of substrates, oxygen presence, and the C:N ratio on the production of PHB and exopolysaccharides (EPS), showing the highest polymer yields are achieved with nucleotides and amino acids under aerobic conditions. This comprehensive M-model will help reveal the metabolic processes by which this ubiquitous species influences communities in wastewater treatment systems and natural environments.

Tec-Campos, Diego (ORCID:0000000188194150)↗

High‐quality genome‐scale metabolic modelling of Pseudomonas putida highlights its broad metabolic capabilities

Summary Genome‐scale reconstructions of metabolism are computational species‐specific knowledge bases able to compute systemic metabolic properties. We present a comprehensive and validated reconstruction of the biotechnologically relevant bacterium Pseudomonas putida KT2440 that greatly expands computable predictions of its metabolic states. The reconstruction represents a significant reactome expansion over available reconstructed bacterial metabolic networks. Specifically, i JN1462 (i) incorporates several hundred additional genes and associated reactions resulting in new predictive capabilities, including new nutrients supporting growth; (ii) was validated by in vivo growth screens that included previously untested carbon (48) and nitrogen (41) sources; (iii) yielded gene essentiality predictions showing large accuracy when compared with a knock‐out library and Bar‐seq data; and (iv) allowed mapping of its network to 82 P . putida sequenced strains revealing functional core that reflect the large metabolic versatility of this species, including aromatic compounds derived from lignin. Thus, this study provides a thoroughly updated metabolic reconstruction and new computable phenotypes for P . putida , which can be leveraged as a first step toward understanding the pan metabolic capabilities of Pseudomonas .

Microbiology↗

Further Investigation of Employing Binomial Small-Sample Estimator in M-LROM

Reduced Order Modeling (ROM) is essential to enable the identification of the so-called active parameter subspace for high-fidelity models that are employed in computationally intensive analyses such as uncertainty characterization and data assimilation. Given the complexity of models for real-world application, brute force methods to identify the active subspace may not be computationally efficient to realize the value of reduction, since in realistic problems, the full scale model must be executed few hundred times, which may be computationally taxing. Earlier work has introduced a new approach, which represents a further development of our previous work on ROM, referred to as multi-level ROM (M-LROM). In M-LROM, approximate models are employed to identify the active subspace instead of the full scale model. In this summary, we present our recent results on M-LROM, specifically in regard to the construction of reliable error metrics that can bound the errors resulting from the reduction. The idea is to employ a lower fidelity model, i.e., an approximation of the full scale or high fidelity model, to build the active subspace, and via the proposed error bound, the quality of the active subspace can be determined by calculating an upper bound on the errors resulting from the reduction. For this approach to be practical, the error bound must be realistic, implying that it should be close to the actual errors expected, and not much higher. Therefore, an important goal of this summary is to compare different error bounds in terms of the relation between their estimated bounds to the actual errors. In particular, we compare the proposed error bound which numerically construct an estimator using binomial distribution to the widely used small-sample norm estimators. Unlike most probabilistic error estimation methods, the proposed bound employs a binomial distribution to construct the estimator whereas in other conventional methods, the distribution employed is typically the standard Gaussian, normalized over a unit hypersphere as initially proposed by the seminal paper of J. Dixon on random matrix theory. Previous publications provided evidence that the binomial distribution calculates more realistic bounds as compared to the Gaussian distribution, which tends to be conservative, implying that the bound is much bigger than the actual errors, which diminishes the value of the reduction, as now must increase the size of the active subspace to reach the desired upper bound on the reduction errors. This work has provided a rigorous approach by which error bounds on the reduction errors can be established without having to execute the high fidelity model during the construction of the active subspace. The high fidelity model is only need to test the error bound using small number of executions. This methodology paves the way for a more efficient application of ROM to complex engineering models, where standard ROM techniques may be too taxing to optimally realize their value in practical situations. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Productions of second Kaluza-Klein gauge bosons in the minimal universal extra dimension model at LHC

We calculate the production rates of the second Kaluza-Klein (KK) photon {gamma}{sup (2)} and Z boson Z{sup (2)} at the LHC including all significant processes in the minimal universal extra dimension (MUED) model. For discrimination of the MUED model from other TeV scale models at the LHC, {gamma}{sup (2)} and Z{sup (2)} play a crucial role. In order to discuss the discrimination and calculate their production rates, we derive KK number violating operators including the contribution of the top Yukawa coupling. Using these operators, we accurately calculate branching ratios of second KK particles. In addition we find that these KK number violating operators provide new processes for {gamma}{sup (2)} and Z{sup (2)} productions, such as cascade decay from second KK quarks produced through these operators. They have large contributions to their total production rates. In particular, these production processes give the dominant contribution for {gamma}{sup (2)} production for 1/R > or approx. 800 GeV. As a result, with an integrated luminosity of 100 fb{sup -1}, the number of produced {gamma}{sup (2)} and Z{sup (2)} are estimated as 10{sup 6}-10{sup 2} for the compactification scale between 400 and 2000 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Deep Learning for Subgrid‐Scale Turbulence Modeling in Large‐Eddy Simulations of the Convective Atmospheric Boundary Layer

Abstract In large‐eddy simulations, subgrid‐scale (SGS) processes are parameterized as a function of filtered grid‐scale variables. First‐order, algebraic SGS models are based on the eddy‐viscosity assumption, which does not always hold for turbulence. Here we apply supervised deep neural networks (DNNs) to learn SGS stresses from a set of neighboring coarse‐grained velocity from direct numerical simulations of the convective boundary layer at friction Reynolds numbers Re τ up to 1243 without invoking the eddy‐viscosity assumption. The DNN model was found to produce higher correlation between SGS stresses compared to the Smagorinsky model and the Smagorinsky‐Bardina mixed model in the surface and mixed layers and can be applied to different grid resolutions and various stability conditions ranging from near neutral to very unstable. The DNN model can capture key statistics of turbulence in a posteriori (online) tests when applied to large‐eddy simulations of the atmospheric boundary layer.

54 ENVIRONMENTAL SCIENCES↗

Criticality Accident Alarm System Modeling with SCALE

Criticality accident alarm systems (CAAS) can be difficult to analyze since they consist of both criticality calculations and deep-penetration radiation transport calculations. Radiation transport codes are typically optimized for one of those two aspects but not both. A three-dimensional CAAS modeling capability within SCALE 6 has been created by linking the KENO-VI criticality code to the MAVRIC shielding sequence. KENO-VI has been optimized for criticality calculations and used for over 20 years. MAVRIC is a new sequence in SCALE 6 designed for radiation transport in deep-penetration problems. MAVRIC contains features such as automated variance reduction and mesh tally capabilities, which are quite useful in CAAS modeling.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Wave tank and bench-top control testing of a wave energy converter

An increasing number of experiments are being conducted to study the design and performance of wave energy converters. Often in these tests, a real-time realization of prospective control algorithms is applied in order to assess and optimize energy absorption as well as other factors. This paper details the design and execution of an experiment for evaluating the capability of a model-scale WEC to execute basic control algorithms. Model-scale hardware, system, and experimental design are considered, with a focus on providing an experimental setup capable of meeting the dynamic requirements of a control system. To more efficiently execute such tests, a dry bench testing method is proposed and utilized to allow for controller tuning and to give an initial assessment of controller performance; this is followed by wave tank testing. The trends from the dry bench test and wave tank test results show good agreement with theory and confirm the ability of a relatively simple feedback controller to substantially improve energy absorption. Additionally, the dry bench testing approach is shown to be an effective and efficient means of designing and testing both controllers and actuator systems for wave energy converters.

16 TIDAL AND WAVE POWER↗

Dynamic responses of submerged components in advanced reactors: experimental and numerical studies

The seismic design of an advanced nuclear reactor must consider the interaction of vessel internal components with the surrounding coolant: fluid–structure interaction (FSI). Available analytical solutions for FSI of submerged components do not accommodate multiple-component, intense seismic inputs and complex reactor and internal geometries. Physical testing of reactor vessels and internals to inform seismic design is impractical and cost-prohibitive, leaving the use of verified and validated, robust numerical models as the only plausible option for analysis and design. Physical data that could be used for validating such numerical models for multi-component shaking are not available. This article describes an experimental program performed on a 6-degree-of-freedom earthquake simulator to generate data that could support validation of seismic FSI numerical models for submerged components in commercial finite element codes. A scaled model of a base-supported reactor vessel with simplified representations of submerged internals was tested to generate submerged-component response histories for a range of seismic inputs. The generated data were used to validate numerical models in the finite element code LS-DYNA. Numerical models were validated for calculation of hydrodynamic pressure responses on internals, in-water frequencies of internals, and acceleration responses of internals. The generated data and the analysis recommendations could aid engineering analysts designing submerged components and systems for seismic effects.

Engineering↗

Modeling scale-up of particle coating by atomic layer deposition

Atomic layer deposition (ALD) is a promising technique to functionalize particle surfaces for energy applications including energy storage, catalysis, and decarbonization. In this work, we present a set of models of ALD particle coating to explore the transition from lab scale to manufacturing. Our models encompass the main particle coating manufacturing approaches including rotary bed, fluidized bed, and continuously vibrating reactors. These models provide key metrics, such as throughput and precursor utilization, required to evaluate the scalability of ALD manufacturing approaches and their feasibility in the context of energy applications. Our results show that designs that force the precursor to flow through fluidized particles transition faster to a transport-limited regime where throughput is maximized. They also exhibit higher precursor utilization. In the context of continuous processes, our models indicate that it is possible to achieve self-extinguishing processes with almost 100% precursor utilization. A comparison with past experimental results of ALD in fluidized bed reactors shows excellent qualitative and quantitative agreement.

25 ENERGY STORAGE↗

Isolating Weakly and Strongly-Absorbing Classes of Carbonaceous Aerosol: Optical Properties, Abundance and Lifecycle

The goal of this project was to evaluate climate-relevant properties of carbonaceous particles and the transformations of those particles in the atmosphere, with the purpose of developing lumped classes of carbonaceous particles suitable for use in large-scale models. These climate-relevant properties included light absorption and hygroscopicity. Hygroscopicity is a measure of water affinity, which governs particle growth at humid conditions and absorption and scattering under those conditions. It also controls particles’ activation into cloud droplets, which in turn affects cloud albedo and particle removal. This project used laboratory measurements of fresh and aged carbonaceous aerosol, and predictions of properties using a particle-resolved model, to identify sensitivities. The focus in this project was on aerosol from biomass pyrolysis, abbreviated BrC (“brown carbon”). We measured absorption by aerosol from biomass pyrolysis from two sources with very different composition: wood and corn stalk. For both sources, the greatest light absorption occurred at the highest generation temperature, and this maximum absorption was very similar to that of wood-generated aerosol. We suggest that pyrolysis products can be considered surrogates for a wide range of biomass aerosol. We captured aerosol emitted from biomass pyrolysis on filters and exposed it to ultraviolet radiation, to the atmospheric trace gases ozone, ammonia (NH 3 ) and nitrogen oxide; and to aqueous saturated salt solutions of ammonium sulfate, ammonium nitrate, sodium chloride and sodium sulfate. Absorption increased, but by only small amounts for all of these treatments, with one exception: after aging with ammonia, absorption increased by almost a factor of four. Absorption increased more at visible wavelengths. We confirmed that a significant change occurred in the aerosol phase, by measuring absorption by suspended particles after aging with NH 3 and finding doubled aerosol absorption. Aging by NH 3 produces a mild increase in the hygroscopicity of BrC, and a greater increase in cloud condensation nucleus activity. Therefore, reactions with NH 3 form compounds that absorb more light than the original aerosol and act as surfactants, increasing the likelihood that these particles will participate in cloud formation. The particle-resolved model PartMC was enhanced to include additional physical processes. It was calibrated against chamber results, and we needed to account for the non-spherical structure of particle agglomerates, even for ammonium sulfate. We implemented the “volatility basis set” (VBS) framework in the model. The updated PartMC-MOSAIC model was able to simulate gas and aerosol concentrations from the CARES campaign at levels similar to observations. The PartMC model was used to evaluate plume dynamics affecting CCN activity of biomass burning aerosols early in a plume. Coagulation limits emission of CCN to about 1016 per kg of fuel. Co-emitted, semi-volatile organic compounds or emission at small particle sizes can homogenize composition before plume exit, and SVOC co-emission can be the main factor determining plume-exit CCN for hydrophobic or small particles. When externally-mixed, accumulation-mode particles are emitted in the absence of SVOCs, CCN can be overestimated by up to a factor of two. This means that measurements made on aerosol from all phases of combustion gathered into a single chamber may incorrectly estimate CCN properties. Based on the findings here, we make some recommendations for use in large-scale models: (1) inventories should represent “internally” versus “externally” mixed under certain combustion conditions; (2) consideration of non-spherical particles when coagulation is important for climate-relevant properties near sources; (3) designating organic biomass particles as weakly absorbing; (4) “inherent absorption” and hygroscopicity are not altered with aging by ozone or ultraviolet light, and inherent absorption is not altered with salt addition, but both cloud activity and absorption are altered by aging with ammonia and could require a separate class in large-scale models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of a practical approach for field scale moisture flow modeling in heterogeneous media at a semiarid site

Abstract A practical approach for modeling field‐scale moisture flow in a highly heterogeneous unsaturated medium is described in this study. The validity of this approach is demonstrated through comparison of the numerical simulations with field observations at a semiarid site located in southcentral Washington State. The methodology is based on upscaling the core scale hydraulic properties and combining power‐law and tensorial connectivity‐tortuosity (PA‐TCT) approaches to derive macroscopic anisotropy parameters for each hydrostratigraphic unit (HSU) identified in the field. Each heterogeneous HSU is approximated by an equivalent homogeneous medium (EHM) model for which PA‐TCT parameters are used in the flow simulations. The available field data on moisture content and matric potential are compared with steady‐state flow simulations based on the mean form of Richards' equation. While the homogenization or averaging of heterogeneities, embedded in the EHM modeling approximation, cannot capture all of the field‐scale variability, the simulated steady‐state moisture and matric potential profiles capture well the central tendency of the field data. This approach is deemed practical for assessing the fate and transport of contaminants in highly heterogeneous unsaturated media at the transport scale of hundreds of meters.

Khaleel, Raziuddin↗

Turbulent kinetics of a large wind farm and their impact in the neutral boundary layer

High-resolution large-eddy simulation of the flow over a large wind farm (64 wind turbines) is performed using the HIGRAD/FIRETEC-WindBlade model, which is a high-performance computing wind turbine–atmosphere interaction model that uses the Lagrangian actuator line method to represent rotating turbine blades. These high-resolution large-eddy simulation results are used to parameterize the thrust and power coefficients that contain information about turbine interference effects within the wind farm. Those coefficients are then incorporated into the WRF (Weather Research and Forecasting) model in order to evaluate interference effects in larger-scale models. In the high-resolution WindBlade wind farm simulation, insufficient distance between turbines creates the interference between turbines, including significant vertical variations in momentum and turbulent intensity. The characteristics of the wake are further investigated by analyzing the distribution of the vorticity and turbulent intensity. Quadrant analysis in the turbine and post-turbine areas reveals that the ejection motion induced by the presence of the wind turbines is dominant compared to that in the other quadrants, indicating that the sweep motion is increased at the location where strong wake recovery occurs. Regional-scale WRF simulations reveal that although the turbulent mixing induced by the wind farm is partly diffused to the upper region, there is no significant change in the boundary layer depth. The velocity deficit does not appear to be very sensitive to the local distribution of turbine coefficients. However, differences of about 5% on parameterized turbulent kinetic energy were found depending on the turbine coefficient distribution. Furthermore, turbine coefficients that consider interference in the wind farm should be used in wind farm parameterization for larger-scale models to better describe sub-grid scale turbulent processes.

17 WIND ENERGY↗

solveME: fast and reliable solution of nonlinear ME models

Background Genome-scale models of metabolism and macromolecular expression (ME) significantly expand the scope and predictive capabilities of constraint-based modeling. ME models present considerable computational challenges: they are much (>30 times) larger than corresponding metabolic reconstructions (M models), are multiscale, and growth maximization is a nonlinear programming (NLP) problem, mainly due to macromolecule dilution constraints. Results Here, we address these computational challenges. We develop a fast and numerically reliable solution method for growth maximization in ME models using a quad-precision NLP solver (Quad MINOS). Our method was up to 45 % faster than binary search for six significant digits in growth rate. We also develop a fast, quad-precision flux variability analysis that is accelerated (up to 60× speedup) via solver warm-starts. Finally, we employ the tools developed to investigate growth-coupled succinate overproduction, accounting for proteome constraints. Conclusions Just as genome-scale metabolic reconstructions have become an invaluable tool for computational and systems biologists, we anticipate that these fast and numerically reliable ME solution methods will accelerate the wide-spread adoption of ME models for researchers in these fields.

Biochemistry & Molecular Biology↗

From electrons to infrastructure: Engineering concrete from the bottom up

An approach rooted in fundamental, mechanistic models of concrete materials offers the only viable path for handling the enormous number of variables that are being introduced as new materials are added to the design space, and as new properties are mandated for a sustainable infrastructure. These models must begin at the smallest length scales relevant for concrete properties; in some cases this is the scale of electron interactions among atoms and ions. But concrete has complex chemical and structural properties that are manifested at greater length and time scales, so atomic scale models must ultimately be integrated with new models that capture behavior at mesoscopic and macroscopic scales. We refer to this methodology as the 'bottom-up' approach because it proceeds from the smallest length scales. We describe this kind of modeling approach, include some recent results, and suggest some principles for collaboratively integrating multi-scale models.

36 MATERIALS SCIENCE↗

Inferring microbial interactions with their environment from genomic and metagenomic data

Microbial communities assemble through a complex set of interactions between microbes and their environment, and the resulting metabolic impact on the host ecosystem can be profound. Microbial activity is known to impact human health, plant growth, water quality, and soil carbon storage which has lead to the development of many approaches and products meant to manipulate the microbiome. In order to understand, predict, and improve microbial community engineering, genome-scale modeling techniques have been developed to translate genomic data into inferred microbial dynamics. However, these techniques rely heavily on simulation to draw conclusions which may vary with unknown parameters or initial conditions, rather than more robust qualitative analysis. To better understand microbial community dynamics using genome-scale modeling, we provide a tool to investigate the network of interactions between microbes and environmental metabolites over time. Using our previously developed algorithm for simulating microbial communities from genome-scale metabolic models (GSMs), we infer the set of microbe-metabolite interactions within a microbial community in a particular environment. Because these interactions depend on the available environmental metabolites, we refer to the networks that we infer as metabolically contextualized , and so name our tool MetConSIN: Met abolically Con textualized S pecies I nteraction N etworks.

59 BASIC BIOLOGICAL SCIENCES↗

An integrated computational materials engineering framework to analyze the failure behaviors of carbon fiber reinforced polymer composites for lightweight vehicle applications

A bottom-up multi-scale modeling approach is used to develop an Integrated Computational Materials Engineering (ICME) framework for carbon fiber reinforced polymer (CFRP) composites, which has the potential to reduce development to deployment lead time for structural applications in lightweight vehicles. In this work, we develop and integrate computational models comprising of four size scales to fully describe and characterize three types of CFRP composites. In detail, the properties of the interphase region are determined by an analytical gradient model and molecular dynamics analysis at the nano-scale, which is then incorporated into micro-scale unidirectional (UD) representative volume element (RVE) models to characterize the failure strengths and envelopes of UD CFRP composites. Then, the results are leveraged to propose an elasto-plastic-damage constitutive law for UD composites to study the fiber tows of woven composites as well as the chips of sheet molding compound (SMC) composites. Subsequently, the failure mechanisms and failure strengths of woven and SMC composites are predicted by the meso-scale RVE models. Finally, building upon the models and results from lower scales, we show that a homogenized macro-scale model can capture the mechanical performance of a hat-section-shaped part under four-point bending. Along with the model integration, we will also demonstrate that the computational results are in good agreement with experiments conducted at different scales. The present work illustrates the potential and significance of integrated multi-scale computational modeling tools that can virtually evaluate the performance of CFRP composites and provide design guidance for CFRP composites used in structural applications.

36 MATERIALS SCIENCE↗

Dynamics-based halo model for large scale structure

Accurate modeling of the one-to-two halo transition has long been difficult to achieve. Here, we demonstrate that physically motivated halo definitions that respect the bimodal phase-space distribution of dark matter particles near halos resolves this difficulty. Specifically, the two phase-space components are overlapping and correspond to (1) particles orbiting the halo and (2) particles infalling into the halo for the first time. Motivated by this decomposition, García et al. [Mon. Not. R. Astron. Soc. 521, 2464 (2023)] advocated for defining halos as the collection of particles orbiting their self-generated potential. This definition identifies the traditional one-halo term of the halo-mass correlation function with the distribution of orbiting particles around a halo, while the two-halo term governs the distribution of infalling particles. We use dark matter simulations to demonstrate that the distribution of orbiting particles is finite and can be characterized by a single physical scale 𝑟 h , which we refer to as the halo radius. The two-halo term is described using a simple yet accurate empirical model based on the Zel’dovich correlation function. We further demonstrate that the halo radius imprints itself on the distribution of infalling particles at small scales. Our final model for the halo-mass correlation function is accurate at the ≈ 2% level for 𝑟∈ [0.1, 50] ℎ −1 Mpc. The Fourier transform of our best-fit model describes the halo-mass power spectrum with comparable accuracy for 𝑘 ∈ [0.06, 6.0] ℎ Mpc −1 .

79 ASTRONOMY AND ASTROPHYSICS↗