Search NASA⌕ Search

SEARCH · Search NASA

Results for “SiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Is Tridymite at Gale Crater Evidence for Silicic Volcanism on Mars?

The X-ray diffraction (XRD) instrument (CheMin) onboard the MSL rover Curiosity detected 17 wt% of the SiO2 polymorph tridymite (relative to bulk sample) for the Buckskin drill sample (73 wt% SiO2) obtained from sedimentary rock in the Murray formation at Gale Crater, Mars. Other detected crystalline materials are plagioclase, sanidine, cristobalite, cation-deficient magnetite, and anhydrite. XRD amorphous material constitutes approx. 60 wt% of bulk sample, and the position of its broad diffraction peak near approx. 26 deg. 2-theta is consistent with opal-A. Tridymite is a lowpressure, high-temperature mineral (approx. 870 to 1670 deg. C) whose XRD-identified occurrence on the Earth is usually associated with silicic (e.g., rhyolitic) volcanism. High SiO2 deposits have been detected at Gale crater by remote sensing from martian orbit and interpreted as opal-A on the basis H2O and Si-OH spectral features. Proposed opal-A formation pathways include precipitation of silica from lake waters and high-SiO2 residues of acid-sulfate leaching. Tridymite is nominally anhydrous and would not exhibit these spectral features. We have chemically and spectrally analyzed rhyolitic samples from New Mexico and Iwodake volcano (Japan). The glassy (by XRD) NM samples have H2O spectral features similar to opal-A. The Iwodake sample, which has been subjected to high-temperature acid sulfate leaching, also has H2O spectral features similar to opal-A. The Iwodake sample has approx. 98 wt% SiO2 and 1% wt% TiO2 (by XRF), tridymite (>80 wt.% of crystalline material without detectable quartz by XRD), and H2O and Si-OH spectral features. These results open the working hypothesis that the opal-A-like high-SiO2 deposits at Gale crater detected from martian orbit are products of alteration associated with silicic volcanism. The presence or absence of tridymite will depend on lava crystallization temperatures (NM) and post crystallization alteration temperatures (Iwodake).

Morris, Richard V.↗

Evaluations of Damaged High-Pressure Compressor Blades in Two Turbine Engines of NASA DC–8

A series of flights were performed by the NASA DC-8 for the FIREX-AQ missions to observe the effects of wildfires and agricultural fires on air quality and climate in selected locations of the United States. Borescope evaluations after these flights indicated accelerated damage had occurred over this flight series to the blades in the high pressure compressor section of all four CFM56-2C1 turbine engines. This erosion and impact damage appeared to vary in severity, and appeared most severe for engines 3 and 4 located on the right wing of the DC-8.Engine 3 had the most flight hours and cycles since last overhaul of 7,152 h and 2,502 cycles. Engine 4 had the lowest flight hours and cycles since last overhaul of 1,354 h and 369 cycles. For these reasons, three noticeably damaged blades were selected from the high pressure compressor for each of these two engines, and then evaluated at NASA GRC using optical and scanning electron microscopy. Engine 3 compressor blades had both erosion and impact damage that were observed and characterized. The erosion damage was associated with embedded particles 13 μm to 42 μm in sectioned width, composed of varied compositions ranging from SiO2 to SiO2 also containing Ca, Mg, and Al (CMAS). The impact damage was associated with the impacts of larger objects at least 650 μm to 850 μm in width, but only small fragments 5 μm to 15 μm in sectioned width were embedded in the impact surface, also composed of SiO2 to SiO2 containing Ca, Mg, and Al (CMAS). On the other hand, engine 4 blades had only impact damage that was observed and characterized. This impact damage was associated with impacts of objects at least 1,480 μm to 2,080μm in width. Small fragments 5 μm to 15 μm in sectioned width were embedded in the impact surface. For one impact, the fragments were again composed of SiO2 to SiO2 containing Ca, Mg, and Al (CMAS). For two other impacts, the fragments were often composed of Fe, and less frequently Cu.

turbine↗

Self Assembled Monolayers for Passivated Contacts

Passivated contacts mitigate defects typically encountered due metallization of solar cells. We deposit amorphous silicon (a-Si:H) on an oxidized silicon wafer via PECVD and anneal at high temperature to crystallize into polysilicon passivated contact. One drawback is the absorption of the polysilicon between grid fingers, so removal of this material is desirable to maximize Jsc. Alternatively, interdigitated back contact cells rely on a gap between n- and p- fingers, which is commonly etched to ensure electronic isolation. We utilize a self assembled monolayer (SAM) using hexamethyldisilazane (HMDS) as a precursor to pattern and etch amorphous silicon (a-Si:H) and polysilicon without the need for photoresist. Ultraviolet light exposure oxidizes the HMDS by photocleaving the organic groups [1] of the SAM leaving a patterned SiO2. Directly soaking this in TMAH will eventually etch the SAM and the silicon, where the SiO2 serves as an etch mask. Inversely, a dilute HF dip selectively etches this SiO2 and the SAM remains. A subsequent soak in TMAH selectively etches the underlying silicon, where the SAM serves as an etch mask. Importantly, we find that the SAM can remain intact for metallization, where we measure 10 mO-cm2 specific contact resistivity on n-type polysilicon.

passivation↗

Spectroscopic Investigation into Oxidative Degradation of Silica-Supported Amine Sorbents for CO2 Capture

Oxidative degradation characteristics of silica-supported amine sorbents with varying amounts of tetraethylenepentamine (TEPA) and polyethylene glycol (PEG; P200 or P600 represents PEG with molecular weights of 200 or 600) have been studied by IR and NMR spectroscopy. Thermal treatment of the sorbents and liquid TEPA at 1008C for 12 h changed their color from white to yellow. The CO2 capture capacity of the TEPA/ SiO2 sorbents (i.e., SiO2-supported TEPA with a TEPA/SiO2 ratio of 25:75) decreased by more than 60%. IR and NMR spectroscopy studies showed that the yellow color of the degraded sorbents resulted from the formation of imide species. The imide species, consisting of NH associated with two C=O functional groups, were produced from the oxidation of methylene groups in TEPA. Imide species on the degraded sorbent are not capable of binding CO2 due to its weak basicity. The addition of P200 and P600 to the supported amine sorbents improved both their CO2 capture capacities and oxidative degradation resistance. IR spectroscopy results also showed that TEPA was immobilized on the SiO2 surface through hydrogen bonding between amine groups and the silanol groups of SiO2. The OH groups of PEG interact with NH2/NH of TEPA through hydrogen bonding. Hydrogen bonds disperse TEPA on SiO2 and block O2 from accessing TEPA for oxidation. Oxidative degradation resistance and CO2 capture capacity of the supported amine sorbents can be optimized through adjusting the ratio of hydroxyl to amine groups in the TEPA/PEG mixture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoporous silica-encapsulated gold core–shell nanoparticles for active solvent-free benzyl alcohol oxidation

Silica-encapsulated gold core@shell nanoparticles (Au@SiO2 CSNPs) were synthesized via a bottom-up procedure and used to catalyze the selective oxidation of benzyl alcohol. The pore size, morphology, crystallinity and composition of Au@SiO2 was evaluated using non-local density functional theory, transmission electron microscopy, high-energy x-ray diffraction and inductively coupled plasma-mass spectroscopy, respectively. The nanoparticles exhibit a mesoporous shell with an average thickness of 25.5 Å which can enhance selectivity via preferential transport of the desired product (i.e., benzaldehyde) relative to larger, undesired products (i.e, benzoic acid/benzyl benzoate). GC-FID analysis revealed the addition of potassium carbonate to the solvent-free oxidation of benzyl alcohol increased conversion from 17.3 to 60.4% while decreasing selectivity from 98.7 to 75.0%. Under equivalent conditions, a bare gold nanoparticle control catalyst deposited on a silica support with a similar gold surface area took 6 times as long to reach the same conversion, achieving only 49.4% selectivity. These results suggest that the pore size distribution within the inert silica shell of Au@SiO2 CSNPs inhibits the formation of undesired products to facilitate the selective oxidation of benzaldehyde despite a basic environment, which reduces selectivity under typical conditions. The CSNPs demonstrated a much lower activation energy than the Au-SiO2 control catalyst, 37 ± 1.9 kJ/mol and 72 ± 7.1 kJ/mol, respectively. Thiele modulus analysis indicates the CSNP pore structure does not create a mass transport limitation due to the nano-scale path of diffusion through the pore structure to the active surface. The lower activation energy and mesopore distribution together suggest the Au@SiO2 catalyst demonstrates higher activity through beneficial in-pore orientation, both reducing competitive adsorption and promoting a single, lower activation energy mechanistic pathway.

benzyl alcohol oxidation, catalysis, confinement↗

Investigation of crystallization processes from hafnium silicate powders prepared from an oxychloride sol-gel

Hafnium oxide and silicate materials are now incorporated into working CMOS devices, however the crystallisation mechanism is still poorly understood. In particular, addition of SiO2 to HfO2 has been shown to increase the crystallisation temperature of HfO2 hence allowing it to remain amorphous under current processing conditions. Building on earlier work we here investigate bulk HfxSi1-xO2 samples to determine the effect of SiO2 on the crystallisation pathway. Techniques such as XRD, HTXRD, thermal analysis techniques and TEM are used. It is found that the addition of SiO2 has very little affect on the crystallisation path at temperatures below 900 C but at higher temperatures a second t-HfO2 phase nucleates and is stabilised due to the strain of the surrounding amorphous SiO2 material. With an increase in SiO2 content the temperature at which this nucleation and stabilisation occurs is increased. The effect of strain has implications for inhibiting the crystallisation of the high-k layer, reduction of grain boundaries and hence diffusion, reduction of formation of interface layers and the possibility of stabilising t-HfO2 rather than m-HfO2 hence increasing the dielectric of the layer.

McGilvery, Catriona M.↗

Nepheline Crystallization in Nuclear Waste Glasses: Progress toward acceptance of high-alumina formulations

We have critically compiled and analyzed historical data for investigating the quantity of nepheline (NaAlSiO4) precipitation as a function of composition in simulated nuclear waste glasses. To understand composition we used two primary methods: 1) investigating the Al2O3-SiO2-Na2O ternary with filtering for different B2O3 levels and 2) creating a quadrant system consisting of compositions reduced to two metric numbers. These metrics are 1) the nepheline discriminator (ND) which depends only on the SiO2 content by weight normalized to the total weight of the Al2O3-SiO2-Na2O sub-mixture and 2) the optical basicity (OB) which contains contributions from all constituents in the glass. Nepheline precipitation is expected to be suppressed at high SiO2 levels (ND >0.62) or at low basicities (OB <0.55 to 0.57). Changes in sodium aluminosilicate glass OB due to additions of CaO and B2O3 correlate with observed effects on nepheline formation. We propose that additional composition space is available for formulating high-waste-loading, high-Al¬2O3 nuclear waste glasses when Na2O levels are less than ~0.125 (normalized by weight on the Al2O3-SiO2-Na2O sub-mixture). However, this compositional space is considerably extended to higher Na2O levels when adding >5 wt% B2O3. The OB concept can help further refine regions of nepheline-free glass formation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A novel X-ray photoelectron spectroscopy study of the Al/SiO2 interface

The nondestructive measurement of the chemical and physical characteristics of the interface between bulk SiO2 and thick aluminum films is reported. Both X-ray phototelectron spectroscopy (XPS) and electrical measurements of unannealed, resistively evaporated Al films on thermal SiO2 indicate an atomically abrupt interface. Post metallization annealing at 450 C induces reduction of the SiO2 by the aluminum, at a rate consistent with the bulk reaction rate. The XPS measurement is performed from the SiO2 side after the removal of the Si substrate with XeF2 gas and thinning of the SiO2 layer with HF:ETOH. This represents a powerful new approach to the study of metal-insulator and related interfaces.

Hecht, M. H.↗

Geochemistry of approximately 1.9 Ga sedimentary rocks from northeastern Labrador, Canada

Fifty-eight rock chips from fifteen samples of sedimentary rocks from the Ramah Group (approximately 1.9 Ga) in northeastern Labrador, Canada, were analyzed for major and minor elements, including C and S, to elucidate weathering processes on the Earth's surface about 1.9 Ga ago. The samples come from the Rowsell Harbour, Reddick Bight, and Nullataktok Formations. Two rock series, graywackes-gray shales of the Rowsell Harbour, Reddick Bight and Nullataktok Formations, and black shales of the Nullataktok Formation, are distinguishable on the basis of lithology, mineralogy, and major and trace element chemistry. The black shales show lower concentrations than the graywackes-gray shales in TiO2 (0.3-0.7 wt% vs. 0.7-1.8 wt%), Al2O3 (9.5-20.1 wt% vs. 13.0-25.0 wt%), and sigma Fe (<1 wt% vs. 3.8-13.9 wt% as FeO). Contents of Zr, Th, U, Nb, Ce, Y, Rb, Y, Co, and Ni are also lower in the black shales. The source rocks for the Ramah Group sediments were probably Archean gneisses with compositions similar to those in Labrador and western Greenland. The major element chemistry of source rocks for the Ramah Group sedimentary rocks was estimated from the Al2O3/TiO2 ratios of the sedimentary rocks and the relationship between the major element contents (e.g., SiO2 wt%) and Al2O3/TiO2 ratios of the Archean gneisses. This approach is justified, because the Al/Ti ratios of shales generally retain their source rock values; however, the Zr/Al, Zr/Ti, and Cr/Ni ratios fractionate during the transport of sediments. The measured SiO2 contents of shales in the Ramah Group are generally higher than the estimated SiO2 contents of source rocks by approximately 5 wt%. This correction may also have to be applied when estimating average crustal compositions from shales. Two provenances were recognized for the Ramah Group sediments. Provenance I was comprised mostly of rocks of bimodal compositions, one with SiO2 contents approximately 45 wt% and the other approximately 65 wt%, and was the source for most sedimentary rocks of the Ramah Group, except for black shales of the Nullataktok Formation. The black shales were apparently derived from Provenance II that was comprised mostly of felsic rocks with SiO2 contents approximately 65 wt%. Comparing the compositions of the Ramah Group sedimentary rocks and their source rocks, we have recognized that several major elements, especially Ca and Mg, were lost almost entirely from the source rocks during weathering and sedimentation. Sodium and potassium were also leached almost entirely during the weathering of the source rocks. However, significant amounts of Na were added to the black shales and K to all the rock types during diagenesis and/or regional metamorphism. The intensity of weathering of source rocks for the Ramah Group sediments was much higher than that of typical Phanerozoic sediments, possibly because of a higher PCO2 in the Proterozoic atmosphere. Compared to the source rock values, the Fe3+/Ti ratios of many of the graywackes and gray shales of the Ramah Group are higher, the Fe2+/Ti ratios are lower, and the sigma Fe/Ti ratios are the same. Such characteristics of the Fe geochemistry indicate that these sedimentary rocks are comprised of soils formed by weathering of source rocks under an oxygen-rich atmosphere. The atmosphere about 1.9 Ga was, therefore, oxygen rich. Typical black shales of Phanerozoic age exhibit positive correlations between the organic C contents and the concentrations of S, U, and Mo, because these elements are enriched in oxygenated seawater and are removed from seawater by organic matter in sediments. However, such correlations are not found in the Ramah Group sediments. Black shales of the Ramah Group contain 1.7-2.8 wt% organic C, but are extremely depleted in sigma Fe (<1 wt% as FeO), S (<0.3 wt%), U (approximately l ppm), Mo (<5 ppm), Ni (<2 ppm), and Co (approximately 0 ppm). This lack of correlation, however, does not imply that the approximately 1.9 Ga atmosphere-ocean system was anoxic. Depletion of these elements from the Ramah Group sediments may have occurred during diagenesis.

Non-NASA Center↗

Volatile Reaction Products From Silicon-Based Ceramics in Combustion Environments Identified

Silicon-based ceramics and composites are prime candidates for use as components in the hot sections of advanced aircraft engines. These materials must have long-term durability in the combustion environment. Because water vapor is always present as a major product of combustion in the engine environment, its effect on the durability of silicon-based ceramics must be understood. In combustion environments, silicon-based ceramics react with water vapor to form a surface silica (SiO2) scale. This SiO2 scale, in turn, has been found to react with water vapor to form volatile hydroxides. Studies to date have focused on how water vapor reacts with high-purity silicon carbide (SiC) and SiO2 in model combustion environments. Because the combustion environment in advanced aircraft engines is expected to contain about 10-percent water vapor at 10-atm total pressure, the durability of SiC and SiO2 in gas mixtures containing 0.1- to 1-atm water vapor is of interest. The reactions of SiC and SiO2 with water vapor were monitored by measuring weight changes of sample coupons in a 0.5-atm water vapor/0.5-atm oxygen gas mixture with thermogravimetric analysis.

Opila, Elizabeth J.↗

Evidence for Differential Comminution/Aeolian Sorting and Chemical Weathering of Martian Soils Preserved in Mars Meteorite EET79001

Impact-melt glasses containing Martian atmospheric gases in Mars meteorite EET79001 are formed from Martian soil fines that had undergone meteoroid-comminution and aeolian sorting accompanied by chemical weathering near Mars surface. Using SiO2 and SO3 as proxy for silicates and salts respectively in Mars soils, we find that SiO2 and SO3 correlate negatively with FeO and MgO and positively with Al2O3 and CaO in these glasses, indicating that the mafic and felsic components are depleted and enriched relative to the bulk host (Lith A/B) respectively as in the case of Moon soils. Though the overall pattern of mineral fractionation is similar between the soil fines on Mars and Moon, the magnitudes of the enrichments/depletions differ between these sample-suites because of pervasive aeolian activity on Mars. In addition to this mechanical processing, the Martian soil fines, prior to impact-melting, have undergone acid-sulfate dissolution under oxidizing/reducing conditions. The S03 content in EET79001,507 (Lith B) glass is approx.18% compared to < 2% in EET79001, 506 (Lith A). SiO2 and SO3 negatively correlate with each other in ,507 glasses similar to Pathfinder soils. The positive correlation found between FeO and SO3 in ,507 glasses as well as Pathfinder rocks and soils is consistent with the deposition of ferric-hydroxysulfate on regolith grains in an oxidizing environment. As in the case of Pathfinder soils, the Al 2O3 vs SiO2 positive correlation and FeO VS S102 negative correlation observed in ,507 glasses indicate that SiO2 from the regolith is mobilized as soluble silicic acid at low pH. The large off-set in the end-member FeO abundance ( SO3=0) between Pathfinder soil-free rock and sulfur-free rock in ,507 glass precursors suggests that the soils comprising the ,507 glasses contain much larger proportion of fine-grained Martian soil fraction that registers strong mafic depletion relative to Lith B. This inference is strongly supported by the Al2O3 - SO3 negative correlation observed in both ,507 glasses and pathfinder soils. Furthermore, the flat MgO-SO3 correlation observed in the case of ,507 glasses shows that the solubilized MgSO4 is mobilized by the aqueous solutions leaving behind the rock-residue with approx.2-3% MgO. This value is similar to the approx.2% MgO found for the soil-free rock at the Pathfinder site. The EET79001 ,506 glasses, in contrast, show that Al2O3 and CaO positively correlate with SO3 indicating that Al is precipitated as amorphous hydroxysulfate at relatively high pH. The FeO - SO3 negative correlation observed in ,506 glasses yields an end-member FeO abundance of approx.21% for the sulfur-free rock, which is consistent with the 22% FeO deduced for the Viking soil-free rock. Further, the FeO and MgO negative correlation with S03 observed in ,506 glasses indicates that the divalent Fe and Mg released from ferromagnesian minerals by acid sulfate dissolution are mobilized away from the reaction sites as soluble sulfates under reducing environment. A similar negative correlation between FeO and SO3 and a positive correlation between Al2O3 and SO3 found in Viking soils suggest that they also had undergone acid-sulfate dissolution under relatively reducing conditions.

Rao, M. N.↗

Synergy of Nuclear and Electronic Energy Losses in Ion-irradiation Processes: the Case of Vitreous Silicon Dioxide

Structural modification of vitreous SiO2 by Au ion irradiation is investigated over an energy regime (~ 0.3-15 MeV) where the decrease of the nuclear energy loss with increasing energy is compensated by the increase of the electronic energy loss, leading to a nearly constant total energy loss of ~ 4 keV/nm. The radii of damaged zones resulting from the ion impact, deduced from changes in infrared bands as a function of ion fluence, decrease from 4.9 nm at 0.3 MeV to 2.5 and 2.6 nm at 9.8 MeV and 14.8 MeV, respectively. Based on previous data where vitreous SiO2 was irradiated with much higher energy Au ions, the damage zone radius increases from 2.4 nm at 22.7 MeV to 5.4 nm at 168 MeV, and a U-shaped dependence on energy within experimental uncertainty is observed in the energy region from 0.3 MeV to 168 MeV. The current results demonstrate that large damage radii at low and high ion energy can be explained by the elastic or inelastic thermal spike model, respectively. In the transition regime where both nuclear and electronic energy loss are significant, an unified thermal spike model consisting a coherent synergy of the elastic collision spike model with the inelastic thermal spike model is suggested to interpret and describe the radius evolution from the nuclear to the electronic energy regime.

electronic energy loss↗

A Sinter-Resistant Catalytic System Based on Platinum Nanoparticles Supported on TiO2 Nanofibers and Covered by Porous Silica

Platinum is a key catalyst that is invaluable in many important industrial processes such as CO oxidation in catalytic converters, oxidation and reduction reactions in fuel cells, nitric acid production, and petroleum cracking.[1] Many of these applications utilize Pt nanoparticles supported on oxides or porous carbon.[2] However, in practical applications that involve high temperatures (typically higher than 3008C), the Pt nanoparticles tend to lose their specific surface area and thus catalytic activity during operation because of sintering. Recent studies have shown that a porous oxide shell can act as a physical barrier to prevent sintering of unsupported metal nanoparticles and, at the same time, provide channels for chemical species to reach the surface of the nanoparticles, thus allowing the catalytic reaction to occur. This concept has been demonstrated in several systems, including Pt@SiO2,[3] Pt@CoO,[4] Pt/CeO2@SiO2,[5] Pd@SiO2,[6] Au@SiO2,[7] Au@SnO2 [8] and Au@ZrO2 [9] core– shell nanostructures. Despite these results, a sinter-resistant system has not been realized in supported Pt nanoparticle catalysts.

Environmental Molecular Sciences Laboratory↗

Crystal orbital study on the double walls made of nanotubes encapsulated inside zigzag carbon nanotubes

The structure stabilities and electronic properties are investigated by using ab initio self-consistent-field crystal orbital method based on density functional theory for the one-dimensional (1D) double-wall nanotubes made of n-gon SiO{sub 2} nanotubes encapsulated inside zigzag carbon nanotubes. It is found that formation of the combined systems is energetically favorable when the distance between the two constituents is around the Van der Waals scope. The obtained band structures show that all the combined systems are semiconductors with nonzero energy gaps. The frontier energy bands (the highest occupied band and the lowest unoccupied band) of double-wall nanotubes are mainly derived from the corresponding carbon nanotubes. The mobilities of charge carriers are calculated to be within the range of 10{sup 2}–10{sup 4} cm{sup 2} V{sup −1} s{sup −1} for the hybrid double-wall nanotubes. Young’s moduli are also calculated for the combined systems. For the comparison, geometrical and electronic properties of n-gon SiO{sub 2} nanotubes are also calculated and discussed. - Graphical abstract: Structures and band structures of the optimum 1D Double walls nanotubes. The optimized structures are 3-gon SiO2@(15,0), 5-gon SiO2@(17,0), 6-gon SiO2@(18,0) and 7-gon SiO2@(19,0). - Highlights: • The structure and electronic properties of the 1D n-gon SiO{sub 2}@(m,0)s are studied using SCF-CO method. • The encapsulation of 1D n-gon SiO{sub 2} tubes inside zigzag carbon nanotubes can be energetically favorable. • The 1D n-gon SiO{sub 2}@(m,0)s are all semiconductors. • The mobility of charge carriers and Young’s moduli are calculated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arrays of SiO(2) Substrate-Free Micromechanical Uncooled THz and Infrared Detectors

We describe the design, fabrication, and characterization of arrays of uncooled infrared and terahertz micromechanical detectors that utilize SiO2 as a main structural material. Materials with highly dissimilar coefficients of thermal expansion, namely, Al and SiO2, were used to form folded bimaterial regions. This approach improved the detector sensitivity by 12 times compared to SiNx-based detectors of similar shape and size. Two types of structural SiO2 layers were investigated: thermally grown and plasma-enhanced chemical-vapor-deposited SiO2. Fabrication of the detector arrays relied on a straightforward process flow that involved three photolithography steps and no wet etching. The noise equivalent temperature difference intrinsic to the detectors fabricated during this work can reach 3.8 mK when excluding any contribution from the optical readout used to interrogate the arrays.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Epitaxial registry and transport properties in V4O7 thin films

We report the growth of V4O7 thin films deposited simultaneously on amorphous SiO2 and crystalline c-cut Al2O3 substrates. x-ray diffraction shows that films grown on SiO2 are polycrystalline with no preferred orientation, while films grown on Al2O3 exhibit a well-defined out-of-plane orientation and an in-plane registry consistent with epitaxial growth. Transmission electron microscopy confirms the crystallographic relationship between the V4O7 film and the Al2O3 substrate. Atomic force microscopy indicates substantially lower surface roughness for films grown on Al2O3 (~6 nm) compared to those grown on SiO2 (~22 nm), and Raman spectroscopy confirms stabilization of the same V4O7 phase on both substrates. Electrical transport measurements reveal a metal–insulator transition near 244 K for both substrates, with thermal hysteresis not exceeding ~1 K. Although the transition temperature remains essentially unchanged, films grown on Al2O3 exhibit higher conductivity over the entire temperature range, exceeding that of films grown on SiO2 by approximately two orders of magnitude at 100 K and by a factor of five at 300 K. These results indicate that the conductivity differences are consistent with variations in microstructural connectivity associated with crystallographic order.

36 MATERIALS SCIENCE↗

Area-selective atomic layer deposition enabled by competitive adsorption

In this work, we investigate the atomic layer deposition (ALD) of ZrO2 thin films on Cu and SiO2 substrates, using Zr[N(C2H5CH3)]4 as the thin-film precursor, and H2O or O2 as the coreactants. Here, we introduce 3-hexyne as a coadsorbate molecule during the thin-film precursor half-cycle and examine its effect on the selectivity of growth. We find that 3-hexyne strongly inhibits growth on Cu, while having essentially no effect on the growth on SiO2. Calculations using dispersion-inclusive density functional theory verify that 3-hexyne undergoes sp → sp2 rehybridization on Cu, which results in strong chemisorption on the metal surface, while only binding weakly to SiO2 via nonbonded van der Waals/dispersion interactions. After 10 cycles of ALD using 3-hexyne as the coadsorbate, we observed the deposition of ∼1.5 nm of ZrO2 on SiO2. On a Cu substrate, we only detected <0.15 nm of ZrO2 after the same number of cycles of ALD. At this point in the process, we find evidence of the formation of cuprous oxide (Cu2O) from in situ x-ray photoelectron spectroscopy and a significant increase in the roughness of the Cu substrate. We conclude that both factors likely contribute to the loss of selectivity due to the formation of sites (e.g., Cu2O) that bind 3-hexyne less strongly and/or an increase in the density of highly reactive sites (e.g., steps, kinks) that promote dissociative chemisorption of the thin-film precursor.

Suh, Taewon (ORCID:0000000163823811)↗

Effect of silica and gold nanoparticles on macrophage proliferation, activation markers, cytokine production, and phagocytosis in vitro

The accumulation of durable nanoparticles (NPs) in macrophages following systemic administration is well described. The ultimate biological impact of this accumulation on macrophage function, however, is not fully understood. In this study, nontoxic doses of two durable NPs, SiO2 and Au, at particle sizes of ~10 nm and 300 nm were used to evaluate the effect of bioaccumulation on macrophage function in vitro using RAW 264.7 mouse macrophage-like cells as a model system. Cell proliferation, cell cycle, cytokine production, surface marker activation, and phagocytosis responses were evaluated through a panel of assays using flow cytometry and confocal microscopy. The most dramatic change in RAW 264.7 cell function was a reduction in phagocytosis as monitored by the uptake of Escherichia coli. Cells exposed to both 10 nm Au NPs and 10 nm SiO2 NPs showed ~50% decrease in phagocytosis, while the larger NPs caused a less dramatic reduction. In addition to modifying phagocytosis profiles, 10 nm SiO2 NPs caused changes in proliferation, cell cycle, and cell morphology. Au NPs had no effect on cell cycle, cytokine production, or surface markers and caused interference in phagocytosis in the form of quenching when the assay was performed via flow cytometry. Confocal microscopy analysis was used to minimize this interference and demonstrated that both sizes of Au NPs decreased the phagocytosis of E. coli. Overall, our results demonstrate that Au and SiO2 NP uptake by macrophages can influence macrophage phagocytosis in vitro without altering surface markers and cytokine production in vitro. While the biological impact of these findings remains unclear, our results indicate that bioaccumulation of durable NPs within the macrophages may lead to a suppression of bacterial uptake and possibly impair bactericidal activity.

60 APPLIED LIFE SCIENCES↗