Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Polar cap magnetic variations and their relationship with the interplanetary magnetic sector structure.

The relationship between polar geomagnetic variations and the polarity of the interplanetary magnetic sectors has been studied for the quiet year 1965. It is found that during the day hours a system of ionospheric currents encircles the magnetic poles on every day. The current system may extend up to 15 deg from the pole but is strongest at 8 to 10 deg invariant colatitude. The current direction as seen from near the magnetic poles is counterclockwise during interplanetary sectors with field pointing away from the sun and clockwise during toward sectors. The current strength is dependent on season, being strongest during local summer. When the magnetic pole is on the nightside of the earth, this polar cap current is absent or very weak.

Svalgaard, L.↗

Strong temporal variation in treefall and branchfall rates in a tropical forest is related to extreme rainfall: results from 5 years of monthly drone data for a 50 ha plot

Abstract. A mechanistic understanding of how tropical-tree mortality responds to climate variation is urgently needed to predict how tropical-forest carbon pools will respond to anthropogenic global change, which is altering the frequency and intensity of storms, droughts, and other climate extremes in tropical forests. We used 5 years of approximately monthly drone-acquired RGB (red–green–blue) imagery for 50 ha of mature tropical forest on Barro Colorado Island, Panama, to quantify spatial structure; temporal variation; and climate correlates of canopy disturbances, i.e., sudden and major drops in canopy height due to treefalls, branchfalls, or the collapse of standing dead trees. Canopy disturbance rates varied strongly over time and were higher in the wet season, even though wind speeds were lower in the wet season. The strongest correlate of monthly variation in canopy disturbance rates was the frequency of extreme rainfall events. The size distribution of canopy disturbances was best fit by a Weibull function and was close to a power function for sizes above 25 m2. Treefalls accounted for 74 % of the total area and 52 % of the total number of canopy disturbances in treefalls and branchfalls combined. We hypothesize that extremely high rainfall is a good predictor because it is an indicator of storms having high wind speeds, as well as saturated soils that increase uprooting risk. These results demonstrate the utility of repeat drone-acquired data for quantifying forest canopy disturbance rates at fine temporal and spatial resolutions over large areas, thereby enabling robust tests of how temporal variation in disturbance relates to climate drivers. Further insights could be gained by integrating these canopy observations with high-frequency measurements of wind speed and soil moisture in mechanistic models to better evaluate proximate drivers and with focal tree observations to quantify the links to tree mortality and woody turnover.

54 ENVIRONMENTAL SCIENCES↗

A systematic study of lanthanide titanates (A 2 Ti 2 O 7 ) chemical durability: corrosion mechanisms and control parameters

Dense lanthanide titanates ranging from La 2 Ti 2 O 7 to Yb 2 Ti 2 O 7 were synthesized by spark plasma sintering with similar micro-sized microstructure, and their chemical durability and degradation mechanisms were investigated by semi-dynamic leaching tests. Different corrosion mechanisms from incongruent to congruent dissolution were observed with preferential elemental releases of lanthanides in A 2 Ti 2 O 7 (A = La to Gd) and Ti in Er 2 Ti 2 O 7 and Yb 2 Ti 2 O 7 . Initial leaching was controlled by surface dissolution and long-term dissolution shifted to a diffusion-controlled mechanism for titanate pyrochlores from Sm 2 Ti 2 O 7 to Yb 2 Ti 2 O 7 . Both short-term and long-term leaching rates decreased from La 2 Ti 2 O 7 to Yb 2 Ti 2 O 7 , and materials became more corrosion resistant with decreasing ionic radius ratios of the rare-earth elements and titanium. Amorphous passivation films of several nm-thick enriched with Ti formed on the surfaces of the corroded materials, and the formation mechanisms were governed either by surface reorganization with preferential release of lanthanides or dissolution-precipitation from saturated bulk solutions with preferential release of titanium. Finally, these results demonstrate that the ionic size plays a dominant role in determining chemical durability of lanthanide titanates and a strong correlation is established among chemical composition/structural variation, passivation film formation and corrosion mechanisms, and materials chemical durability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Edge effects on band gap energy in bilayer 2H-MoS{sub 2} under uniaxial strain

The potential of ultrathin MoS{sub 2} nanostructures for applications in electronic and optoelectronic devices requires a fundamental understanding in their electronic structure as a function of strain. Previous experimental and theoretical studies assume that an identical strain and/or stress state is always maintained in the top and bottom layers of a bilayer MoS{sub 2} film. In this study, a bilayer MoS{sub 2} supercell is constructed differently from the prototypical unit cell in order to investigate the layer-dependent electronic band gap energy in a bilayer MoS{sub 2} film under uniaxial mechanical deformations. The supercell contains an MoS{sub 2} bottom layer and a relatively narrower top layer (nanoribbon with free edges) as a simplified model to simulate the as-grown bilayer MoS{sub 2} flakes with free edges observed experimentally. Our results show that the two layers have different band gap energies under a tensile uniaxial strain, although they remain mutually interacting by van der Waals interactions. The deviation in their band gap energies grows from 0 to 0.42 eV as the uniaxial strain increases from 0% to 6% under both uniaxial strain and stress conditions. The deviation, however, disappears if a compressive uniaxial strain is applied. These results demonstrate that tensile uniaxial strains applied to bilayer MoS{sub 2} films can result in distinct band gap energies in the bilayer structures. Such variations need to be accounted for when analyzing strain effects on electronic properties of bilayer or multilayered 2D materials using experimental methods or in continuum models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-Reacting Friction Stir Welding for Aluminum Alloy Circumferential Weld Applications

Friction stir welding is an innovative weld process that continues to grow in use, in the commercial, defense, and space sectors. It produces high quality and high strength welds in aluminum alloys. The process consists of a rotating weld pin tool that plasticizes material through friction. The plasticized material is welded by applying a high weld forge force through the weld pin tool against the material during pin tool rotation. The high weld forge force is reacted against an anvil and a stout tool structure. A variation of friction stir welding currently being evaluated is self-reacting friction stir welding. Self-reacting friction stir welding incorporates two opposing shoulders on the crown and root sides of the weld joint. In self-reacting friction stir welding, the weld forge force is reacted against the crown shoulder portion of the weld pin tool by the root shoulder. This eliminates the need for a stout tooling structure to react the high weld forge force required in the typical friction stir weld process. Therefore, the self-reacting feature reduces tooling requirements and, therefore, process implementation costs. This makes the process attractive for aluminum alloy circumferential weld applications. To evaluate the application of self-reacting friction stir welding for aluminum alloy circumferential welding, a feasibility study was performed. The study consisted of performing a fourteen-foot diameter aluminum alloy circumferential demonstration weld using typical fusion weld tooling. To accomplish the demonstration weld, weld and tack weld development were performed and fourteen-foot diameter rings were fabricated. Weld development consisted of weld pin tool selection and the generation of a process map and envelope. Tack weld development evaluated gas tungsten arc welding and friction stir welding for tack welding rings together for circumferential welding. As a result of the study, a successful circumferential demonstration weld was produced leading the way for future circumferential weld implementation.

Bjorkman, Gerry↗

Progress Summary: Simulating stochastic and additively manufactured foams at large strains and high strain rates

Motivation: Understanding the mechanical response of polymer foams is essential in developing system material models and in designing replacements for legacy pads and cushions. Simulations can help elucidate structure-property relationships and compare local stress distributions to understand aging behavior and improve designs. In many applications,these materials experience significant loadings and computations need the capability to reproduce those conditions. Significance: In designing the compressive and shear response of additively manufactured foams, we expect the curvature of the substrate to influence their mechanical behavior. Progress:We have the capability of mapping planar structures to arbitrary curved surfaces and are currently developing the software and procedures to translate the mapped pattern into a geometrical model that can be imported to either finite element or material point software to evaluate the mechanical response. Figure 1 depicts a four-layer face-centered tetragonal pattern (FCT) mapped to a hemispherical surface. Because the mapping cannot exactly preserve both distances and angles, we expect some local variation in mechanical properties and porosity. These models will help determine the sensitivity of these variations to structure and curvature, optimize the mapping procedure, and inform the design of foams for non-planar surfaces.

36 MATERIALS SCIENCE↗

Computational modeling of mixed-ligand cobalt complexes with o-quinone derivative of corannulene

The structure and energy characteristics of isomers of electrically neutral adducts of tetracoordinate cobalt complexes with o-quinone derivative of corannulene were studied quantum chemically within the density functional theory (DFT) in the UB3LYP*/6-311++G(d,p) approximation. It was shown that the framework rigidity of the redox-active ligand favors convergence of the energy levels of the high-spin and low-spin isomers of the complexes under study as compared to the o-benzoquinone-containing analogues. At the same time, steric strain in the corannulene moiety causes the stability of the adducts to reduce. A compound characterized by high stabilization energy and the ability to switch its spin states via valence tautomeric rearrangements was found by systematic variation of structural parameters of cobalt bis(chelate).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Indirect methods for measuring variations of the solar constant

The difference between the methods that measure delta S, and those that measure variations in the solar luminosity, delta L, is discussed. It is shown that the past practice of simply relating delta S to delta L by geometrical arguments is not valid because of anisotropy of the solar radiation. It is concluded that direct techniques prove the existence of short term variability that is fully explainable in terms of the passage of active regions (spots and faculae) on the face of the Sun. The obervations of changes in the solar diameter support the existence of structurally induced variations of the solar luminosity on timescales of tens of years, which are significant in the understanding of climatic variations.

Sofia, S.↗

Specific features of formation of radiation defects in the silicon layer in 'silicon-on-insulator' structures

Specific features of formation of radiation defects in thin silicon layer of silicon-on-insulator (SOI) structures have been studied. It is shown that there are differences between variations in the structural and electrical properties of the thin silicon layer and those in bulk silicon crystals (with similar electrical characteristics) subjected to the same radiation effect. It is established that the embedded insulator in the SOI structure represents a barrier for motion of radiation-induced intrinsic interstitial silicon atoms, which brings about an increase in the dose of bombarding ions, which leads to the loss of single-crystallinity of the silicon layer in a SOI structure. It is shown that {gamma}-ray irradiation with doses unaffecting the electrical conductivity of bulk silicon crystals appreciably affects the conductivity of the silicon layer in the SOI structures. In addition, variation in the conductivity of silicon layer is related to variation in the density of surface states at the interface between the silicon layer and the built-in insulator, rather than to generation of conventional radiation-induced structural defects in silicon.

36 MATERIALS SCIENCE↗

Investigation of A-site La substituted BaTi{sub 0.96}Mn{sub 0.04}O{sub 3} ceramics: Searching for ferromagnetic origin

Ba{sub 1-x}La{sub x}Ti{sub 0.96}Mn{sub 0.04}O{sub 3} ceramics (x = 0, 3%, 7%) were prepared by a modified Pechini method and the structure, morphology, magnetic and electric properties have been investigated. X-ray diffraction analysis reveals La{sup 3+} ions could suppress the formation of hexagonal phase effectively. The cell parameter c decreases firstly and then increases with the increase of La content, which indicates that La ions have been incorporated into the lattice of BaTi{sub 0.96}Mn{sub 0.04}O{sub 3}, and that Mn ions transform from high valence to low valence. The magnetization, polarization and leakage currents are also influenced by La doping greatly. Detailed analysis of magnetic variation with structural change attributes the room temperature ferromagnetism to double exchange interactions between Mn{sup 3+} and Mn{sup 4+} ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Spatiotemporal Structure of 20th Century Climate Variations in Observations and Reanalyses: Long-term Trend - Part 1

The dominant interannual El Nino-Southern Oscillation phenomenon (ENSO) and the short length of climate observation records make it difficult to study long-term climate variations in the spatiotemporal domain. Based on the fact that the ENS0 signal spreads to remote regions and induces delayed climate variation through atmospheric teleconnections, we develop an ENSO-removal method through which the ENS0 signal can be approximately removed at the grid box level from the spatiotemporal field of a climate parameter. After this signal is removed, long-term climate variations, namely, the global warming trend (GW) and the Pacific pan-decadal variability (PDV), are isolated at middle and low latitudes in the climate parameter fields from observed and reanalyses datasets. Except for known GW characteristics, the warming that occurs in the Pacific basin (approximately 0.4K in the 2oth century) is much weaker than in surrounding regions and the other two ocean basins (approximately 0.8K). The modest warming in the Pacific basin is likely due to its dynamic nature on the interannual and decadal time scales and/or the leakage of upper ocean water through the Indonesian Throughflow. Based on NCEP/NCAR and ERA-40 reanalyses, a comprehensive atmospheric structure associated with GW is given. Significant discrepancies exist between the two datasets, especially in the tightly coupled dynamic and water vapor fields. The dynamic field based on NCEP/NCAR reanalysis, which shows a change in the Walker Circulation, is consistent with the GW change in the surface temperature field. However, intensification in the Hadley Circulation is associated with GW trend in the ERA-40 reanalysis.

Chen, Junye↗

Paramagnetic behavior of Co doped TiO{sub 2} nanocrystals controlled by self-purification mechanism

Doping in nanocrystals is a challenging process because of the self- purification mechanism which tends to segregate out the dopants resulting in a greater dopant concentration near the surface than at the interior of nanocrystals. In the present work nanocrystals of TiO{sub 2} doped with different atom % of Co were synthesized by peroxide gel method. XRD analysis confirmed the tetragonal anatase structure and HRTEM images showed the rod-like morphology of the samples. Raman modes of anatase phase of TiO{sub 2} along with weak intensity peaks of Co{sub 3}O{sub 4} for higher Co dopant concentrations were observed for the samples. EPR measurements revealed the presence of cobalt in +2 oxidation state in the TiO{sub 2} matrix. SQUID measurements indicated paramagnetic behavior of the Co doped TiO{sub 2} nanocrystals. The paramagnetic behavior is attributed to an increased concentration of Co{sup 2+} ions and an increased presence of Co{sub 3}O{sub 4} phase near the surface of the TiO{sub 2} nanocrystals due to self-purification mechanism. - Graphical abstract: Variation of the intensity ratios of XRD peaks as a function of atomic ratio of Co. Inset: variation of structure factor for (101) reflection as a function of atomic ratio of Co. Display Omitted - Highlights: • Co doped TiO{sub 2} nanocrystals were synthesized by peroxide gel method. • HRTEM images showed Co doped TiO{sub 2} nanocrystals to be rod-like. • EPR spectra showed +2 oxidation states for Co in the samples. • Co doped TiO{sub 2} nanocrystals showed paramagnetic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Turbulence measurements using tethered balloon instrumentation during FIRE 1987

As part of the surface-based observations conducted on San Nicolas Island, the U.K. Meteorological Office operated a set of turbulence probes attached to a balloon tether cable. Typically six probes were used, each capable of measuring momentum, heat, and humidity fluxes. Two probes were fitted with net radiometers, one positioned above cloud and the other below; a third probe carried a Lyman-alpha hygrometer fitted with a pre-heater for the measurement of total water content. Some preliminary results are presented from the 14th July describing the variation in structure of the cloudy boundary layer during the daytime. This day was characterized by a complete cloud cover, an inversion height of approximately 600 m. and north-westerly winds of approximately 6 m.s(-1). As an illustration the equivalent potential temperature derived from a profile ascent made between approximately 0830 and 0930 (PDT) is shown. The data has been smoothed to a height resolution of about 4 metres. At this time the cloud base was approximately 200 m. and very light drizzle was reaching the surface. The vertical velocity variance and potential temperature flux for two periods are shown; the first (shown by full lines) immediately follows the profile and the second (shown by dashed lines) is central around 1400 (PDT). The data have been normalized by their maximum values in the first period. Cloud base has now risen to approximately 300 m. There is a marked variation during the morning, particularly in sigma w. The net radiative flux above cloud top has by now reached its maximum value.

Hignett, Phillip↗

Effective photon mass and exact translating quantum relativistic structures

Using a variation of the celebrated Volkov solution, the Klein-Gordon equation for a charged particle is reduced to a set of ordinary differential equations, exactly solvable in specific cases. The new quantum relativistic structures can reveal a localization in the radial direction perpendicular to the wave packet propagation, thanks to a non-vanishing scalar potential. The external electromagnetic field, the particle current density, and the charge density are determined. The stability analysis of the solutions is performed by means of numerical simulations. The results are useful for the description of a charged quantum test particle in the relativistic regime, provided spin effects are not decisive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Discovery of black dye crystal structure polymorphs: Implications for dye conformational variation in dye-sensitized solar cells

Here, we present the discovery of a new crystal structure polymorph (1) and pseudopolymorph (2) of the Black Dye, one of the world’s leading dyes for dye-sensitized solar cells, DSSCs (10.4% device performance efficiency). This reveals that Black Dye molecules can adopt multiple low-energy conformers. This is significant since it challenges existing models of the Black Dye···TiO 2 adsorption process that renders a DSSC working electrode; these have assumed a single molecular conformation that refers to the previously reported Black Dye crystal structure (3). The marked structural differences observed between 1, 2, and 3 make the need for modeling multiple conformations more acute. Additionally, the ordered form of the Black Dye (1) provides a more appropriate depiction of its anionic structure, especially regarding its anchoring group and NCS bonding descriptions. The tendency toward NCS ligand isomerism, evidenced via the disordered form 2, has consequences for electron injection and electron recombination in Black Dye embedded DSSC devices. Dyes 2 and 3 differ primarily by the absence or presence of a solvent of crystallization, respectively; solvent environment effects on the dye are thereby elucidated. This discovery of multiple Black Dye conformers from diffraction, with atomic-level definition, complements recently reported nanoscopic evidence for multiple dye conformations existing at a dye···TiO 2 interface, for a chemically similar DSSC dye; those results emanated from imaging and spectroscopy, but were unresolved at the submolecular level. Taken together, these findings lead to the general notion that multiple dye conformations should be explicitly considered when modeling dye···TiO 2 interfaces in DSSCs, at least for ruthenium-based dye complexes.

36 MATERIALS SCIENCE↗

Variation and evolution of atmospheric structure over the SEA BB season as seen from aircraft and reanalysis

The presence of absorbing aerosols and atmospheric water vapor will impact clouds both radiatively and dynamically. The atmosphere over the southeast Atlantic Ocean (SEA) experiences consistent springtime biomass burning (BB) smoke from widespread agricultural fires on the African continent. This smoke layer is initially lofted high in a continental mixed layer (~5-6km) and is then transported westward into the free troposphere where it overlies and ultimately mixes into the underlying stratocumulus-topped oceanic boundary layer. Coincident with this smoke is an elevated humidity signal which is present from the time a given airmass is over the continental source region. ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) was a NASA Earth Venture Suborbital mission with the goal of measuring aerosol, cloud, and atmospheric properties over this region over three deployments in September 2016, August 2017, and October 2018. Measurements included in situ profile measurements of aerosol physical and optical properties, trace gas concentrations, and cloud properties, as well as column measurements of aerosol optical depth and trace gas concentrations from an airborne sun photometer, allowing for calculation of radiative heating at different altitudes. Here we present results from the three ORACLES deployments over the southeast Atlantic Ocean. The airborne observations capture both seasonal patterns (August through October) and spatial patterns (north/south and east/west) in the vertical smoke distribution and its correlation to atmospheric specific humidity over the SEA basin. We describe the observed variations and show that the variability in both meteorological and emissions is largely captured in the European Centre for Medium-range Weather Forecasting Copernicus Atmosphere Monitoring Service (ECMWF CAMS) reanalysis, which allows for a more systematic examination of the relative frequency of observed conditions and their radiative impact over the region. Finally, we discuss the broader radiative and dynamical implications of these results for conditions of biomass burning aerosols overlying stratocumulus clouds.

Kristina Marie Myers Pistone↗

A model of the spatial and temporal variation of the Uranus thermal structure

Seasonal variability of the temperature structure of Uranus is modeled for all latitudes in the .0004 to 2 bar pressure range in anticipation of the Voyager encounter in January 1986. Atmospheric heating in the model results on the one hand from an internal heat source and, on the other hand, from absorption of solar energy by methane and by non-conservative aerosols located between the 0.5 and 2 bar levels. Various cases for the behavior of the internal heat flux are investigated, such as constant with latitude or constrained to yield a time-averaged thermal emission independent of latitude. Meridional transport of heat in the stably stratified atmosphere is not taken into account. The results indicate that the Voyager encounter time, very small north-south temperature asymmetry should be expected. Moreover, the northern hemisphere, although not illuminated, should emit as much energy (within one percent) as the southern hemisphere at this date. At a given latitude, extreme temperatures are reached at the equinoxes. At the poles, seasonal amplitudes of about 10 K in the upper stratosphere and 6 K at the 0.6 bar level are predicted, and the variation with time of the emission to space is found to be at most 20 percent. The atmosphere of Uranus appears to be characterized by very long radiative response times (mainly due to its cold temperature) which inhibit the large seasonal variations that one could otherwise expect in view of the high obliquity of the planet and its long orbital period.

Bezard, B.↗

A Look at the Truths and Misconceptions of the Variational Quantum Eigensolver and the Implications of Overparameterization

In this work, we investigate loss landscapes of the variational quantum eigensolver (VQE) by quantifying the number of local minima through empirical analyses. We focus on minimal models in chemistry and physics so that we can do a complete analysis using more computationally expensive tools. We employ Hessian eigenvalue calculations and the nudged elastic band algorithm to characterize these landscapes. Our results expand upon the existing literature by highlighting the optimization challenges faced by VQE. We find that, as the number of parameters in our ansatz increases, the number of basins increases while the corresponding loss function values converge toward the global minimum value. This observation implies that overparameterization may lead to an ``effective convexity'' in VQE loss landscapes, a phenomenon supported by theoretical and numerical work in classical machine learning.

quantum computing↗