Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface Forces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effect of PVD-coated chromium on the subcooled flow boiling performance of nuclear reactor cladding materials

Here we elucidate the separate effect of a thin Cr coating deposited by physical vapor deposition (PVD) on the subcooled flow boiling performance of zircaloy-4. First, we run flow boiling experiments on prototypical zircaloy-4 surfaces mimicking the scratch pattern and surface roughness of nuclear reactor claddings. Then, we PVD-coat a 0.3 µm thick chromium layer on the same exact surface and repeat the same flow boiling investigations. All experiments are run using deionized water at atmospheric pressure, flowing on a 1 × 3 cm 2 rectangular cross section channel at a rate of 1000 kg/m 2 /s and a subcooling of 10 K. We measure the average temperature of the boiling surface at increasing surface heat fluxes, covering a wide range of heat transfer regimes, from single-phase forced convection to the boiling crisis. We also record high-speed videos of the boiling process, which we postprocess to measure bubble nucleation site density, growth time, departure diameter and frequency. The surface analysis reveals that, while the chromium coating does not seem change the surface roughness and morphology, it improves surface wettability. However, it decreases the critical heat flux. The chromium coating causes an increase of nucleation temperature, bubble departure diameter and growth time, and a reduction of the nucleation site density. The concurrence of these observations indicates that a size reduction of the nucleation sites, conformally covered by the chromium coating, may be the cause of the boiling performance deterioration. We confirm this hypothesis repeating the same analysis on a FeCrAl sample prepared and tested using the same protocol as the zircaloy-4 sample, but with a different initial surface texture.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Coupling between bulk thermal defects and surface segregation dynamics

Surface segregation is a phenomenon that depends on the delicate interplay between thermodynamic driving forces and kinetic obstacles, for which elevated temperature is often needed to enhance the atom mobility and reach equilibrium. Using the classic system of Cu 3 Au ( 100 ) under nonisothermal conditions, in this study, we show an adatom process underlying transient surface segregation dynamics through the temperature-change-driven creation and annihilation of thermal vacancies in the bulk and the resulting bulk-surface mass exchanges. This is demonstrated by monitoring the surface composition evolution of Cu 3 Au ( 100 ) with temperature changes between 250 and 500 ° C , showing that the increase in temperature decreases monotonically the surface Au concentration as a result of the transfer of more Cu than Au from the bulk to the surface to form Cu-rich clusters of adatoms. Such a bulk thermal defect effect is expected to be universal in inducing the disparity in the bulk-surface mass exchanges of dissimilar atoms in multicomponent materials because of the inherent differences in the vacancy formation energies of the constituent atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Extended Lagrangian Born–Oppenheimer molecular dynamics for orbital-free density-functional theory and polarizable charge equilibration models

We report extended Lagrangian Born–Oppenheimer molecular dynamics (XL-BOMD) is formulated for orbital-free Hohenberg–Kohn density-functional theory and for charge equilibration and polarizable force-field models that can be derived from the same orbital-free framework. The purpose is to introduce the most recent features of orbital-based XL-BOMD to molecular dynamics simulations based on charge equilibration and polarizable force-field models. These features include a metric tensor generalization of the extended harmonic potential, preconditioners, and the ability to use only a single Coulomb summation to determine the fully equilibrated charges and the interatomic forces in each time step for the shadow Born–Oppenheimer potential energy surface. The orbital-free formulation has a charge-dependent, short-range energy term that is separate from long-range Coulomb interactions. This enables local parameterizations of the short-range energy term, while the long-range electrostatic interactions can be treated separately. The theory is illustrated for molecular dynamics simulations of an atomistic system described by a charge equilibration model with periodic boundary conditions. The system of linear equations that determines the equilibrated charges and the forces is diagonal, and only a single Ewald summation is needed in each time step. The simulations exhibit the same features in accuracy, convergence, and stability as are expected from orbital-based XL-BOMD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

GaAs growth rates of 528 μm/h using dynamic-hydride vapor phase epitaxy with a nitrogen carrier gas

Herein we demonstrate record GaAs growth rates approaching 530 μm/h using nitrogen carrier gas and 400 μm/h using hydrogen carrier gas in a dynamic-hydride vapor phase epitaxy reactor. We measured root mean square surface roughness below 1 nm using a 1 μm × 1 μm atomic force microscopy scan for GaAs growth rates up to 483 μm/h using a nitrogen carrier gas and 400 μm/h using a hydrogen carrier gas. We performed computational fluid dynamics modeling to study the effect of the carrier gas choice on the thermal profile within the reactor and how that influences the degree of AsH 3 decomposition. The modeling suggests that the lower thermal conductivity of the nitrogen carrier gas minimizes the amount of AsH 3 that thermally decomposes before reaching the wafer surface and the heavier atomic mass decreases the likelihood that AsH 3 will reach the heated reactor walls, leading to a growth rate enhancement relative to the hydrogen carrier case in a hydride-enhanced growth regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

A strategy to eliminate selenium oxide islands formed on the ZnSe/GaAs epilayer

Atomically clean and smooth surfaces are essential for semiconductor device fabrication and epitaxial regrowth. In this regard, spontaneously formed oxide islands or clusters on the surfaces of II-VI semiconductor exposures to air can disrupt interface formation. Using ZnSe/GaAs heterostructures grown by molecular beam epitaxy (MBE), we investigated the effect of surface treatments in eliminating oxide islands. The samples were probed with atomic force microscopy, low-temperature photoluminescence, and scanning electron microscopy. Here, it was found that ultra-high vacuum (UHV) annealing at 200°C, regardless of annealing duration, largely removed the islands while leaving the crystallinity of the ZnSe and GaAs epilayers unaffected. UHV annealing at higher temperatures of 300°C completely removed the islands, but the optical properties of ZnSe and/or GaAs epilayers deteriorated depending on the annealing duration. Our observations provide guidance to set thermal annealing strategies for removing oxide islands from the surfaces of II-VI/III-V semiconductor heterostructures depending on the desired properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Morphological Characterization of Uranyl Fluoride Particles via Atomic Force Microscopy

Uranium hexafluoride (UF 6 ) undergoes a rapid hydrolysis reaction when exposed to atmospheric water. In addition to producing hazardous HF gas, the hydrolysis reaction produces uranyl fluoride (UO 2 F 2 ), a radioactive solid phase particulate material. Because of the technological utility of UF 6 in the nuclear fuel cycle, understanding the transport properties of UO 2 F 2 aerosol produced via UF 6 hydrolysis is important for accident scenarios. Moreover, the fundamental chemical and physical properties of the UF 6 hydrolysis reaction are not completely understood. Recently, several experiments on the aerosol phase properties of UO 2 F 2 produced in this way have shown that under most relevant conditions, the particle size distribution (PSD) of UO 2 F 2 can be extremely small, approximately 3 to 5 nm, which is well below the threshold that can be routinely observed via scanning electron microscopy (SEM). Although readily observable in the aerosol phase, observation of nanometer-sized particles in the condensed phase (i.e. deposited on surfaces) remains a challenge. Here, in this study, we have used atomic force microscopy (AFM) to study the PSD and morphological characteristics of UO 2 F 2 deposited at low and high concentrations under different humidity conditions, a primary variable in the hydrolysis reaction. Here, we find strong agreement between PSD measured in the aerosol phase via scanning mobility particle sizing and PSD measured via AFM, with particle sizes peaked below 4 nm for low-humidity conditions. At higher humidity, the distribution is centered around 5 to 10 nm but extends up to 20 nm. These results are in stark contrast to previous measurements using SEM that show PSD on the order of 300- to 1000-nm particle sizes; moreover, these are the first direct measurements of individual particles of UO 2 F 2 having been produced via UF 6 hydrolysis deposited on surfaces. These measurements, therefore, open a new avenue for collecting and detecting UO 2 F 2 in the condensed phase and further refine the PSD, which is critical for environmental transport determinations.

Uranium hexafluoride↗
DOE OSTI2021

Adsorption of ethylenediamine on Cu surfaces: attributes of a successful capping molecule using first-principles calculations

The shape-controlled synthesis of Cu nanocrystals can benefit a wide range of applications, though challenges exist in achieving high and selective yields to a particular shape. Capping agents play a pivotal role in controlling shape, but their exact role remains ambiguous. In this study, the adsorption of ethylenediamine (EDA) on Cu(100) and Cu(111) was investigated with quantum density functional theory (DFT) to reveal the complex roles of EDA in promoting penta-twinned Cu nanowire growth. We find EDA has stronger binding on Cu(100) than on Cu(111), which agrees the general expectation that penta-twinned Cu nanowires express facets with stronger capping-molecule binding. Despite this stronger binding, ab initio thermodynamics reveals the surface energy of EDA-covered Cu(111) is lower than that EDA-covered Cu(100) at all solution-phase EDA chemical potentials, so there is no thermodynamic driving force for penta-twinned nanowires. We also investigated the capability of EDA to protect Cu surfaces from oxidation in water by quantifying energy barriers for a water molecule to diffuse through EDA layers on Cu(100) and Cu(111). The energy barrier on Cu(100) is significantly lower, which supports observations of faster oxidation of Cu(100) in electrochemical experiments. Thus, we elucidate another possible function of a capping agent – to enable selective oxidation of crystal facets. This finding adds to the general understanding of successful attributes of capping agents for shape-selective nanocrystal growth.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Machine Learning-Enabled Quantitative Analysis of Optically Obscure Scratches on Nickel-Plated Additively Manufactured (AM) Samples

Additively manufactured metal components often have rough and uneven surfaces, necessitating post-processing and surface polishing. Hardness is a critical characteristic that affects overall component properties, including wear. This study employed K-means unsupervised machine learning to explore the relationship between the relative surface hardness and scratch width of electroless nickel plating on additively manufactured composite components. The Taguchi design of experiment (TDOE) L9 orthogonal array facilitated experimentation with various factors and levels. Initially, a digital light microscope was used for 3D surface mapping and scratch width quantification. However, the microscope struggled with the reflections from the shiny Ni-plating and scatter from small scratches. To overcome this, a scanning electron microscope (SEM) generated grayscale images and 3D height maps of the scratched Ni-plating, thus enabling the precise characterization of scratch widths. Optical identification of the scratch regions and quantification were accomplished using Python code with a K-means machine-learning clustering algorithm. The TDOE yielded distinct Ni-plating hardness levels for the nine samples, while an increased scratch force showed a non-linear impact on scratch widths. The enhanced surface quality resulting from Ni coatings will have significant implications in various industrial applications, and it will play a pivotal role in future metal and alloy surface engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dynamics of Electric Polarization and Relaxation of Ions at Humid Calcite Surfaces

Mobile ions at mineral surfaces can respond to an applied electric field, adopting a new distribution that effectively represents polarization of the electrical double layer. When the field is released, the ions relax to their equilibrium distribution. In both cases, the dynamics are characteristic of the interface. However, current models of electrokinetic phenomena are not sufficiently robust to accurately predict collective ion dynamics at structurally and chemically specific mineral–water interfaces. Here, in this study, we use electrostatic force microscopy (EFM) to investigate the dynamics of ion relaxation at hydrated calcite (104) surfaces at controlled relative humidity (RH). Electrically biased probes are used to polarize the distributions of calcium and carbonate ions that are intrinsic to this interface across a range of RH values. Polarization kinetics are tracked by monitoring the tip–sample force gradient during charging, and EFM imaging is used to characterize the spatial relaxation dynamics after the applied field is released. Electrostatic finite element modeling of the sample/probe system across length-scales from nanometers to millimeters reproduces the observed stretched exponential charging response. Together, these results allow us to estimate the ion diffusivities at the interface across a wide range of RH values. These diffusivities increase by roughly 5 orders of magnitude as the RH is increased from 5 to 90%, highlighting the critical role of adsorbed water for surface ion solvation that enables ion mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Initial Assessment of 3D-Printed Molybdenum Lattices as a Substrate for Liquid Metal Plasma-Facing Components

Many liquid metal plasma-facing component concepts for fusion reactors require a capillary porous material to wick the liquid metal to the surface of the component. In this work, samples of 3D-printed molybdenum lattices designed to have pore sizes ranging from 100 to 1000 µm were fabricated by two different suppliers. The dimensions of the lattice structures were characterized using an optical microscope, revealing that the lattice walls were almost systematically thicker than they were designed to be and in turn the pores are all smaller than they were designed to be. In many cases the pores were completely clogged. Several spectroscopic techniques were used to characterize the chemical composition of the materials, collectively indicating the presence of a thick layer of oxygen-rich material extending more than 1 µm below the surface. Compression testing revealed significant asymmetry in the mechanical behavior depending on which direction the force was applied relative to the print direction. Lastly, lithium wetting tests of several lattice samples were performed, and a sample with ~250-µm pores was found to soak up lithium quickly after initial wetting of the surface occurred. The implications of these results for future liquid metal plasma-facing component design are discussed.

Parsons, Matthew S. [Princeton Plasma Physics Labo↗
DOE OSTI2022

Sodium Dodecyl Sulfate–Mediated Graphene Sensor for Electrochemical Detection of the Antibiotic Drug: Ciprofloxacin

The present study involves detecting and determining CIP by a new electrochemical sensor based on graphene (Gr) in the presence of sodium dodecyl sulfate (SDS) employing voltammetric techniques. Surface morphology studies of the sensing material were analyzed using a scanning electron microscope (SEM) and atomic force microscope (AFM). In the electroanalysis of CIP at the developed electrode, an enhanced anodic peak response was recorded, suggesting the electro-oxidation of CIP at the electrode surface. Furthermore, we evaluated the impact of the electrolytic solution, scan rate, accumulation time, and concentration variation on the electrochemical behavior of CIP. The possible electrode mechanism was proposed based on the acquired experimental information. A concentration variation study was performed using differential pulse voltammetry (DPV) in the lower concentration range, and the fabricated electrode achieved a detection limit of 2.9 × 10 -8 M. The proposed sensor detected CIP in pharmaceutical and biological samples. The findings displayed good recovery, with 93.8% for tablet analysis and 93.3% to 98.7% for urine analysis. The stability of a developed electrode was tested by inter- and intraday analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Recombination of Autodissociated Water Ions in a Nanoscale Pure Water Droplet

The recombination of water ions has diverse scientific and practical implications, ranging from acid-base chemistry and biological systems to planetary environments and applications in fuel cell and carbon conversion technologies. While spatial confinement affects the physicochemical properties of water dynamics, its impact on the recombination process has rarely been studied. In this work, we investigate the dynamics of water, the water ion distribution, and the ion recombination process in water droplets as a function of droplet size through molecular dynamics simulations and adaptive quantum mechanical/molecular mechanical calculations. We compare the dynamics of recombination in water droplet sizes ranging from 100 to 18 000 waters, both in their interiors and on their surfaces. We found that the self-diffusion of water dramatically decreases in droplets with a diameter below 2.2 nm. Using a classical RexPoN force-field, we found that the ions in 1000 H2O's spend almost 50% of the time on the surface and 0.5 nm beneath it with a slight preference for OH- ion to reside longer on the surface. We estimate that, on average, recombination in these drops occurs at 400 ps in 1000 H2O's and 1 ns in 3000 H2O's. We also found that recombination is not limited by the local structure of the surface or the size of the droplet but can be influenced by the geometry of the water wire connecting the ions as they approach each other, which can often prevent recombination. Our results provide insights to the reaction microenvironments presented by nanoscopic water droplets.

Kwon, Soonho↗
DOE OSTI2026

Selective Sorbent Design: CaS Aerogel for Rapid Remediation of Aqueous Pb (II)

Heavy metals are a persistent environmental problem due to their high toxicity, even at very low concentrations (parts per billion, ppb). The removal of such diluted heavy metals is challenging because of the competition the counterions (Ca 2+ , Na + , Mg 2+ , etc.) present in natural water bodies. The design of sorbents capable of removing ions below the action limit (15 ppb for Pb 2+ ) requires a strong driving force for selective uptake and rapid removal. In this work, we report the synthesis of porous CaS aerogels (surface area = 143.6 m 2 /g) by oxidative assembly of CaS nanoparticles and describe their use in selective Pb 2+ ion remediation from water. Despite the presence of amorphous CaCO 3 (up to 50 wt %) in the gel network, the gels demonstrated a capacity of 17.1 mmol Pb/g aerogel (3543 mg/g), and this could be augmented to 22.5 mmol Pb/g aerogel (4593 mg/g) by modifying the synthesis to reduce CaCO 3 content to ca. 15 wt %. Moreover, the selectivity of CaS aerogels toward Pb 2+ ions is high, as evidenced by little-to-no change in the distribution constant (K d ∼ 10 4 ) in the presence of competing ions (1 M) such as Na + , Mg 2+ , and Ca 2+ . During remediation with low concentrations (100 ppb) of Pb 2+ with CaS aerogels, the level of Pb 2+ dropped to 5.4 ppb (below the 15 ppb EPA limit) within 1 h with a 95.4% removal efficiency. In contrast to the CO 2 supercritically dried aerogels, lower surface area ambient dried gels (xerogels) only remove 40% of the lead ions from a 100 ppb solution, saturating within 1 h. The efficiency and rapidity of selective Pb 2+ uptake using CdS aerogels arise from a combination of a strong thermodynamic driving force for cation exchange (K eq = 2.5 × 10 27 ) and chemisorption along with favorable kinetics associated with the high surface area porous architecture. These results show that formation of high surface area metal chalcogenide aerogels by oxidative assembly to form nanocrystalline architectures, as previously demonstrated for II−VI and IV−VI semiconductors, can be extended to the more highly ionic alkaline earth sulfides.

Aerogels↗
DOE OSTI2024

Wide range of possible trajectories of North Atlantic climate in a warming world

Decadal variability in the North Atlantic Ocean impacts regional and global climate, yet changes in internal decadal variability under anthropogenic radiative forcing remain largely unexplored. Here we use the Community Earth System Model 2 Large Ensemble under historical and the Shared Socioeconomic Pathway 3-7.0 future radiative forcing scenarios and show that the ensemble spread in northern North Atlantic sea surface temperature (SST) more than doubles during the mid-twenty-first century, highlighting an exceptionally wide range of possible climate states. Furthermore, there are strikingly distinct trajectories in these SSTs, arising from differences in the North Atlantic deep convection among ensemble members starting by 2030. We propose that these are stochastically triggered and subsequently amplified by positive feedbacks involving coupled ocean-atmosphere-sea ice interactions. Freshwater forcing associated with global warming seems necessary for activating these feedbacks, accentuating the impact of external forcing on internal variability. Further investigation on seven additional large ensembles affirms the robustness of our findings. By monitoring these mechanisms in real time and extending dynamical model predictions after positive feedbacks activate, we may achieve skillful long-lead North Atlantic decadal predictions that are effective for multiple decades.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Subsurface Cooling and Sea Surface Temperature Pattern Formation Over the Equatorial Pacific

Abstract The equatorial cold tongue region has not warmed up in response to historical radiative forcing in the real world, contrary to the strong warming often simulated by climate models. Here we demonstrate that climate models fail to represent one or both of the key processes driving observed sea surface temperature (SST) pattern formation: a realistic surface wind stress pattern shaping subsurface cooling through wind‐driven circulation changes, and effective connectivity between subsurface and surface temperatures via upwelling and mixing. Consequently, none of the models approximate the observed lack of cold tongue SST warming and strengthening of zonal SST gradient across the equatorial Pacific. Furthermore, those that come closest achieve this due to interhemispheric warming differences rather than equatorial dynamics as observed. Addressing different origins of subsurface cooling in observations and simulations, and how they connect to SST, will lead to improved understanding of tropical Pacific SST changes to date and how they will evolve in the future.

Jiang, Feng [Lamont‐Doherty Earth Observatory Colu↗
DOE OSTI2020

Enhancement of Optical Efficiency of CSP Mirrors for Reducing O&M Cost via Near-Continuous Operation of Self-Cleaning Electrodynamic Screens (EDS). Final Report

Over the past decade, techno-economical advancements in solar energy systems, particularly the improvement in the conversion efficiency of PV modules made with mono-crystalline silicon solar cells from 12% to 20%, as well as the cost reduction in manufacturing by a factor of about 10%, have made it possible to achieve a levelized cost of electricity (LCOE) in PV plants that is comparable to, or less than, the cost of deriving electricity from fossil fuels. Operating PV plants in mid-latitude sun-belt regions, where the solar irradiance level is highest, provides a high annual energy-yield (kWh/kWp) due to two factors: (1) the availability of predictable high solar irradiance throughout the year with the fewest interruptions in solar flux from clouds and rain, and (2) the increased conversion efficiency of crystalline solar cells, as recombination loss has decreased with increased intensity of the sunlight that illuminates the silicon solar cells. Semi-arid and desert regions, however, are plagued by high atmospheric dust concentrations and frequent sand storms. The deposition of a layer of dust on the optical surfaces of solar collectors such as PV modules and concentrating mirrors reduces the transmission efficiency of sunlight that actually reaches the solar cells or receivers, resulting in high energy-yield soiling loss. There are two major cost components to operating a solar plant: (1) installation costs, and (2) operation-and-maintenance (O&M) costs. There is no fuel cost; hence operating a solar plant in a semi-arid or desert region provides high returns on investment if soiling losses are mitigated via efficient cleaning methods and optimized cleaning frequency. If solar collectors are not cleaned, the accumulation of dust layers on solar collectors may cause the operation of such plants in arid regions to become economically unviable. Washing solar collectors with water and detergent, as is most commonly done now, is an efficient method for cleaning. The conventional approach in utility-scale solar plants is to use a large truck with a water tank and pump system for spraying deionized water on the surface of the solar collectors. Robotic cleaning with brushes, used for many solar plants, requires lesser water for cleaning. The water consumed using semi-automated cleaning of PV modules in utility-scale solar plants is approximately 2 liters/m 2 per cleaning cycle. The total optical surface area of the solar collectors in 1 TW-scale solar installation will be more than 3 × 109 m 2 ; hence an enormous amount of water be needed for cleaning. There simply is not enough fresh water in the sun-belt areas of the world for predicted cleaning needs. In solar power plants, the estimated cost of cleaning solar collectors includes expenses related to the equipment used, labor, cost of transportation of water, the energy required for cleaning, plus ancillary costs whereas the cost of water is not considered. The water used is obtained from sources located close to plant sites, unmindful of the environmental and societal impact as the power plants are oftentimes located in regions that face severe drought. This practice is very similar to the cost calculations in deriving the levelized cost of electricity (LCOE) in conventional power plants based on burning fossil fuel such as coal and gas, while disregarding the cost of climate change and health effects. Unless a water-free or low-water cleaning method is established, the expansion of solar plants may lose public support in areas suffering long intervals of drought. The goal of this research project has been the development and application of the Electrodynamic Screen (EDS) as a means for a water-free, scalable cleaning process applicable to solar-power installations, including rooftop applications. We describe here the development of an EDS film-based cleaning process as an emerging method for use on PV modules, parabolic troughs, and heliostats. This report aims to show the feasibility of integrating or retrofitting EDS films onto the optical surfaces of solar collectors (both PV and CSP) while maintaining high transmission or reflection efficiency. The cleaning action provided by the EDS film is an active method to remove dust deposits by electrodynamic force. Current lab-scale prototype EDS films, retrofitted onto solar panels and mirrors, have shown to be capable of maintaining optical transmission or specular-reflection efficiencies higher than 90% of initial values under clean conditions. The optical surfaces of solar collectors laminated with EDS films can remove more than 90% of deposited dust when the EDS is activated for less than two minutes. As an electrodynamic dust removal process, the EDS film-based method is designed primarily for the removal of dust in solar installations located in semi-arid and desert areas, where the atmosphere is often dry and dusty and rainfall is infrequent. While EDS film application minimizes water consumption and facilitates cleaning as frequently as needed, it has limitations in removing contaminants such as soot, organic pollutants deposited as fine films on the surface, and bird droppings. The dust removal efficiency of the EDS is maximum at relative humidity RH is 40 to 50% and decreases at when RH > 65%. Many solar plant sites undergo diurnal and seasonal cycles of high ambient, early afternoon temperatures and an RH that reaches the dew point early in the morning. These variations in atmospheric conditions do not limit the operation of the EDS film. This report presents a brief review of the progress and the potential of EDS film technology for mitigating the impact of dust on solar collectors via water-free cleaning, as well as current technical challenges regarding efficiency and durability. Our experimental data on the performance of EDS films show that: (1) the dust-removal efficiency (DRE) can reach levels higher than 90%, (2) the specular reflectivity (SR) of EDS film-laminated second-surface mirrors reach levels in excess of 90%, (3) the specular reflectivity restoration (SRR) can exceed 90%, (4) the output-power restoration (OPR) of PV modules can exceed 95%, and (5) the optical transmission efficiency (TE) of the EDS films can be greater than 90%. Working with Sandia National Laboratories (NM), Corning Research and Development Corporation (NY), Eastman Kodak (NY), Tomark-Worthen Industries (NH), and EDS Chile SPA (Chile), we have produced EDS film-laminated PV modules and demonstrated their self-cleaning functions without requiring water. We have demonstrated that the operational range of EDS films will cover the expected ambient temperature of solar fields at RH cycling varying from 20 to 95% as long as the EDS films are activated in the RH range 20 to 50%. (Typical solar-field climates in deserts and semi-arid lands often reach near dew point in coastal areas.) Our experiments on the application of hydrophobic-fluorinated nanoparticle coatings on EDS film surfaces show that the EDS operational range can be extended to higher RH levels that approach the dew point. At Eastman Kodak, as one of our industrial partners, we were able to establish a process for manufacturing EDS films using flexographic printing of the electrodes onto transparent polymer films. This process utilizes an existing manufacturing line at Eastman Kodak that allows fabrication of medium-scale EDS films (26 cm × 30 cm). The manufacturing process has the capacity to produce EDS films at high production speeds. The medium-scale EDS films that have been printed at Kodak were evaluated in the lab at Boston University. The EDS films produced at Kodak were laminated at Tomark-Worthen using an industrial scale vacuum laminator to produce EDS film stacks, which can be affixed onto the optical surfaces of PV modules or concentrating mirrors. The EDS film stack consists of the EDS films that have Willow® Glass (WG) which has a thickness of 100 μm as the front surface. The WG sheets obtained from Corning Research and Development Corporation are customized in size and shape to cover the active area of the EDS films. The back surface of the EDS film stack is integrated onto the optical surface of the solar panel or mirror using optically clear adhesive (OCA) films or silicone adhesives. The OCA films (thickness 25 μm) are produced by 3M. The EDS film stacks have the architecture: WG/OCA/EDS Film/OCA/ over PV module or solar mirror. The power-supply units needed for activating the electrodes of the EDS film were designed and produced at Boston University. These power supply units provide three-phase, 1.2 kV voltage pulses at a very low current (micro-ampere) level and at a low frequency (≈ 5 Hz). The voltage pulses are applied to the electrodes in a sequence such that the train of pulses resembles a unidirectional traveling wave of electrical field on the surface of the EDS film. The dust particles on the surface become charged electrostatically and are levitated by the Coulomb force. The lateral sweeping action of the traveling electric field created by the three-phase voltages pulses then sweeps the dust off the surface. The energy consumed by the EDS electrodes is less than 0.2 Wh/m 2 /cleaning cycle, enabling energy-efficient restoration of output power (OPR) of PV module or specular reflectivity restoration (SRR) for solar mirrors. The EDS system consists of (1) an EDS film stack laminated onto the solar collectors, (2) connection of the EDS film to its power supply unit and (3) Interconnection of the power supply to PV modules or solar mirrors. Design, construction and assessment of field-testing units that have EDS stack laminated PV modules for evaluating the performance of the EDS films in solar fields is being carried out at BU. Our progress under this project, aimed at the advancement of EDS film technology, has reached DOE Technology Readiness Level (TRL) 6. Based on the extensive laboratory evaluations and limited field trials, as well as contacts with potential users, we believe that the technology has reached its commercial stage. We are conducting a cost analysis using the National Renewable Energy Laboratory (NREL) System Advisory Model (SAM) and are preparing for field trials of EDS films in different solar fields in the US, Chile, India and in the Middle East. A brief description of EDS film performance, construction and testing of the field-test unit, autonomous operation of the field-test unit for evaluating EDS performance in increasing energy yield, associated revenue savings, and water conservation is presented.

14 SOLAR ENERGY↗
DOE OSTI2025

Facet-dependent growth and dissolution of hematite resulting from autocatalytic interactions with Fe(II) and oxalic acid

The ability to simultaneously monitor the flux of iron atoms within the solution and solid phases can provide considerable insight into mechanisms of iron oxide mineral transformations. The autocatalytic interaction between hematite and Fe(II)-oxalate has long been of interest for its environmental and industrial relevance. In this study we take advantage of iron isotopic labelling and mass-sensitive imaging at the single particle scale to determine how changes in solution composition correlate with the morphologic evolution of faceted, micrometer-sized hematite platelets. Net dissolution is confirmed through analyses of aqueous iron chemistry, as well as by quantitative atomic force microscopy. Isotopic mapping techniques show that Fe(II) readily adsorbs to (001) and (012) surfaces in the absence of oxalate, but when oxalate is present selective dissolution of the (001) surface prevails and 57Fe deposition via recrystallization is not observed. Comparison between particle microtopographies following reaction with Fe(II), oxalate, and Fe(II)-oxalate show substantially different behavior, consistent with distinct mechanisms of interaction with hematite surfaces. The extensive characterization conducted on the coupled solution/solid dynamics in this system provides new insight for distinguishing crystal growth, dissolution, and recrystallization processes.

Taylor, Sandra D. [BATTELLE (PACIFIC NW LAB)]↗
DOE OSTI2023

Sorption of Arsenate, Selenate, and Molybdate on the Barite (001) Surface

Interactions of ions with ionically bonded minerals such as barite (BaSO 4 ) influence the fate and transport of the ions, while the factors that control the sorption of toxic oxyanions on barite remain elusive. In this study, the sorption of arsenate, selenate, and molybdate on the barite (001) surface was examined at pH ~5 using in situ crystal truncation rod analysis, resonant anomalous X-ray reflectivity, and atomic force microscopy. The results show that arsenate and selenate mainly incorporate into the top monolayer of barite, while molybdate primarily adsorbs above the surface. The sorption coverage of arsenate is greater (by ~100%) than that of selenate but similar to that of molybdate. The different incorporation coverages between arsenate and selenate can be explained by their different protonation states at pH 5. The incorporated arsenate may be stabilized by hydrogen bonds between arsenate and oxygen atoms of neighboring sulfate compared to selenate, which exists predominantly in the deprotonated state. The adsorption of molybdate above the surface probably stems from a surface-induced oligomerization, as the anion and the oligomer may be too large for incorporation. Our observation of these different sorption mechanisms demonstrates how the physicochemical properties of the anions control the selective uptake of the toxic metals on the dominant surface of the ionically bonded mineral barite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗