Search NASA⌕ Search

SEARCH · Search NASA

Results for “System Process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Computing erasure metadata and data layout prior to storage using a processing platform

Techniques are provided for computing data and metadata layout prior to storage in a storage system using a processing platform. An exemplary processing platform comprises one or more of a compute node and a burst buffer appliance. The processing platform communicates with a plurality of the compute nodes over a network, wherein a plurality of applications executing on the plurality of compute nodes generate a plurality of data objects; computes erasure metadata for one or more of the data objects on at least one of the compute nodes; and provides the erasure metadata with the corresponding one or more data objects to a storage system. The processing platform optionally determines a full set of the data objects to be stored and queries the storage system to determine an anticipated layout of the full set of the data objects to be stored. The anticipated layout allows special handling, for example, for small files and large files that are identified based on predefined criteria.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2021

A Markov framework for generalized post-event systems recovery modeling: From single to multihazards

State-dependent models can be used to represent the system recovery process as a series of stochastic transitions from lower to higher functional states. However, the applications of these models have been limited in scope and there is a lack of a generalized recovery modeling framework. A generalized framework would permit a robust forecasting of systems and system-of-systems recovery under multiple hazards, and more broadly, would contribute to community disaster preparedness. This paper develops a generalized post hazard-event recovery modeling framework based on state-dependent Markov-type processes. We then apply the proposed framework to solve a spectrum of problems that range from hind-casting single-system recovery following a single hazard event to forecasting post-event trajectories under multiple hazards and modeling the recovery of a system-of-systems. First, Markov chains are used to hind-cast the observed recovery for a portfolio of buildings affected by the 2014 South Napa, California, earthquake. Next, Markov processes are used to formulate a parametric post hazard-event recovery model, which can be updated using Bayesian statistics when relevant datasets become available. Semi-Markov processes are then used to develop a more general model of single hazard recovery, which accounts for the intensity of the loading and level of damage caused by the event. Semi-Markov processes with non-renewal features are then used to account for multihazard interactions in a post-event recovery model, and applied to a case study that involves a community in Charleston, South Carolina. Lastly, Markov-type processes are combined with Bayesian networks to model the recovery of residential, commercial, educational, and industrial buildings (system-of-systems) following a hazard event. Overall, these applications demonstrate the versatility of the Markov framework towards handling recovery problems with varying levels of complexity.

42 ENGINEERING↗
DOE OSTI2022

Perspectives on the integration between first-principles and data-driven modeling

Efficiently embedding and/or integrating mechanistic information with data-driven models is essential if it is desired to simultaneously take advantage of both engineering principles and data-science. Further the opportunity for hybridization occurs in many scenarios, such as the development of a faster model of an accurate high-fidelity computer model; the correction of a mechanistic model that does not fully-capture the physical phenomena of the system; or the integration of a data-driven component approximating an unknown correlation within a mechanistic model. At the same time, different techniques have been proposed and applied in different literatures to achieve this hybridization, such as hybrid modeling, physics-informed Machine Learning (ML) and model calibration. In this paper we review the methods, challenges, applications and algorithms of these three research areas and discuss them in the context of the different hybridization scenarios. Moreover, we provide a comprehensive comparison of the hybridization techniques with respect to their differences and similarities, as well as advantages and limitations and future perspectives. Finally, we apply and illustrate hybrid modeling, physics-informed ML and model calibration via a chemical reactor case study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exploring the nexus of many-body theories through neural network techniques: the tangent model

Abstract In this paper, we present a physically informed neural network (NN) representation of the effective interactions associated with coupled-cluster downfolding models to describe chemical systems and processes. The NN representation not only allows us to evaluate the effective interactions efficiently for various geometrical configurations of chemical systems corresponding to various levels of complexity of the underlying wave functions, but also reveals that the bare and effective interactions are related by a tangent function of some latent variables. We refer to this characterization of the effective interaction as a tangent model. We discuss the connection between this tangent model for the effective interaction with the previously developed theoretical analysis that examines the difference between the bare and effective Hamiltonians in the corresponding active spaces.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Arrangements for communicating and processing data in a computing system

Systems and methods for reducing data movement in a computer system. The systems and methods use information or knowledge about the structure of an algorithm, operations to be executed at a receiving processing unit, variables or subsets or groups of variables in a distributed algorithm, or other forms of contextual information, for reducing the number of bits transmitted from at least one transmitting processing unit to at least one receiving processing unit or storage device.

Gonzalez, Juan Guillermo↗
DOE OSTI2021

National Academy of Science, Engineering, and Medicine, NASA Planetary Science and Astrobiology Decadal Survey (Chapter 3)

Our inner Solar System has the four terrestrial planets, Mercury, Venus, Earth, and Mars, along with Earth’s large Moon, two small moons of Mars, dwarf planet Ceres, numerous 100-km class asteroids, and a multitude of small bodies that populate the asteroid belt and the inner planet region. To what extent does this structure reflect a deterministic outcome of general Solar System formation processes, and how much of it is instead a consequence of stochastic events that would change in unpredictable ways if the system’s formation could be rerun? This fundamental question motivates scientific investigations of the inner Solar System, with implications not only for understanding our own planet’s origin but also for the origin of planetary systems and Earth-like planets beyond our own.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Process for enhanced production of desired hydrocarbons from biologically-derived compounds and bio-oils containing cyclic compounds by opening of aromatics and naphthenic ring-containing compounds

A system and process for processing biologically-derived compounds or a complex bio-oil by converting cyclic compounds in a complex bio-oil or biologically-derived compounds to desired materials such as high molecular weight paraffins with minimal carbon loss by using a ring-contraction catalyst to selectively produce C5 ring containing compounds; and then reacting the C5 ring containing compounds with a C5 ring opening catalyst in a second reactor to minimize carbon loss via cracking reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Automated Systems for Solvent Extraction

An automated solvent extraction system for the eventual handling of radioactive materials has been designed and procured for rapid, efficient and safe liquid-liquid extraction processes. This system will be configured to carry out liquid-liquid separations from beginning to end, automating tedious and time-consuming tasks such as organic/aqueous phase prep, pH checks, phase separation, and metal ion analysis. The system features advanced liquid handling capabilities, a robotic arm for precise sample transfer, and sophisticated analytical tools including UV-VIS spectrophotometry for real-time monitoring. Additionally, it incorporates automated capping of vials, vortex mixing, and centrifugation to ensure thorough mixing and phase separation. This report provides an overview of the system and general capabilities as well as initial efforts to develop an automated workflow for liquid-liquid separations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

A Redundancy-Guided Approach for the Hazard Analysis of Digital Instrumentation and Control Systems in Advanced Nuclear Power Plants

We report digital instrumentation and control (I&C) upgrades are a vital research area for the nuclear industry. Despite their performance benefits, deployment of digital I&C in nuclear power plants (NPPs) has been limited. Digital I&C systems exhibit complex failure modes including common cause failures (CCFs), which can be difficult to identify. This paper describes the development of a redundancy-guided application of the Systems-Theoretic Process Analysis and fault tree analysis for the hazard analysis of digital I&C in advanced NPPs. The resulting Redundancy-Guided Systems-Theoretic Hazard Analysis (RESHA) is applied for the case study of a representative state-of-the-art digital reactor trip system. The analysis qualitatively and systematically identifies the most critical CCFs and other hazards of digital I&C systems. Ultimately, the RESHA can help researchers make informed decisions for how, and to what degree, defensive measures such as redundancy, diversity, and defense in depth can be used to mitigate or eliminate the potential hazards of digital I&C systems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

building-physics/refrigeration-system

The existing refrigeration system for OpenStudio was originally designed for a prototype supermarket model. To support the development of new modular space types, it is crucial to refactor the system. This process includes refining the design by utilizing the manufacturer's existing data, along with incorporating the latest data from manufacturers, to enhance the system’s adaptability and functionality. This repository currently contains the refrigeration system database and Python-based automation for generating OpenStudio-compatible refrigeration JSON files.

Bae, Yeonjin [Oak Ridge National Laboratory (ORNL)↗
DOE OSTI2021

A Two-Step Restoration Scheme with DER Controllability for Resilient Distribution Systems

Modern distribution systems have increasing integration of distributed energy resources (DERs). A large number of distribution system DERs are interfaced through a power electronic converter. During grid contingency scenarios these resources have been traditionally disconnected, without any fault ride-through capabilities. However, with new regulations and better technology, it is feasible for these resources to contribute to the grid's restoration after an adverse event and hence enhancing resilience. In distribution systems, system restoration is an important problem, especially in face of high-impact low-frequency events. This paper proposes a two-step restoration scheme for the power system restoration process by leveraging additional degrees of freedom in DERs for mitigating voltage problems. Simulation studies are performed on the IEEE-123 node feeder system to demonstrate the effectiveness of the proposed method for various cases.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Isolated data processing modules

This disclosure relates to computer systems that isolate data processing modules and methods of operating the same. In one embodiment of a method, a computer system receives a first data processing request for a first data file. The computer system may determine that a first data type of the first data file is supported by an encapsulated data processing module and determine a first communication protocol from a set of communication protocols that can be used to receive the first data file. The computer system can then receive the first data file from the first storage location in accordance with the first communication protocol and the encapsulated data processing module may be executed to convert the first data file in the first data format into second data in a second data format.

Penton, Joshua Michael↗
DOE OSTI2021

Control and Simulation of a Grid-Forming Inverter for Hybrid PV-Battery Plants in Power System Black Start

Power system restoration is an important part of system planning. Power utilities are required to maintain black start capable generators that can energize the transmission system and provide cranking power to non-blackstart capable generators. Traditionally, hydro and diesel units are used as black start capable generators. With the increased penetration of bulk size solar farms, inverter based generation can play an important role in faster and parallel black start thus ensuring system can be brought back into service without the conventional delays that can be expected with limited black start generators. Inverter-based photovoltaic (PV) power plants have advantages that are suitable for black start. This paper proposes the modeling, control, and simulation of a grid-forming inverter-based PV-battery power plant that can be used as a black start unit. The inverter control includes both primary and secondary control loops to imitate the control of a conventional synchronous machine. The proposed approach is verified using a test system modified from the IEEE 9-bus system in the time-domain electromagnetic transient simulation tool PSCAD. The simulation results shows voltage and frequency stability during a multi-step black-start and network energization process.

Nguyen, Quan H.↗
DOE OSTI2019

US DOE In-Plant Trainings to Develop Expertise and Replicate Success

In-Plant Trainings (INPLTs) offered by the US Department of Energy Better Buildings, Better Plants (Better Plants) program are multi-day workshops performed by industry-recognized experts. INPLTs include both classroom- and field-based sessions that train attendees to identify energy conservation opportunities, quantify savings from these opportunities, and implement projects to realize the savings. These training workshops enhance the attendees’ understanding of working principles, knowledge of best practices, and capability to analyze the energy performance of industrial energy systems. INPLTs are competitively awarded and focus on a wide range of topics, including traditional industrial systems such as steam, process heating and motor-driven systems, and processes such as energy treasure hunts and municipal water and wastewater treatment. Partners that are awarded INPLTs can invite external stakeholders, such as employees of other manufacturers, utility representatives, and vendors. The Better Plants program had delivered 123 INPLTs as of spring 2019, trained more than 2,000 participants, and identified more than $37 million in energy cost savings. This paper provides an overview of INPLTs, some key statistics, the top identified energy savings opportunities, and success stories from INPLTs delivered from 2011 to 2018. Finally, the vision for future INPLTs is discussed based on participants’ feedback and the long-term and strategic goals of the Better Plants program.

Guo, Wei↗
DOE OSTI2025

Equity-driven Planning of Distributed Solar PV using Optimal Transport

Typically, distribution system planning processes do not explicitly incorporate energy equity considerations, such as identifying consumers most affected by energy costs and determining how investments in the distribution system can address existing energy burden imbalances. This paper proposes a novel optimal transport (OT)-based method to improve the energy burden distribution of consumers. The approach involves the strategic siting and sizing of solar PV in order to assist customers with high energy burden and improve the overall energy burden distribution of the community. The desired energy burden distribution is defined using the equal distribution equivalent (EDE) concept. The OT-based method is then used to estimate the distributed solar PV capacity to be installed at various locations and the tariffs to be adjusted, all while improving the energy burden distribution and providing valuable insights into distributed generation (DG) planning. The results on IEEE 37 bus test system demonstrate how DG planning, considering EDE and OT, can help reduce the energy burden of low-income consumers. Additionally, the approach also reveals optimal tariff adjustments needed to ensure revenue neutrality for distribution utilities.

Optimal transport, equal distribution equivalent, ↗
DOE OSTI2021

High-Temperature Multi-Process Sensor Development and Demonstration at a Full-scale PC Combustion System

The main objective of this research program is to design, manufacture, and demonstrate a miniaturized, multi-process, monitoring system (mMPMS) for boiler condition management and easy system deployment to obtain a higher spatial resolution. This system will facilitate a Condition-Based Maintenance (CBM) philosophy that actively monitors the health of assets to predict and prevent failures and maximize availability and generating capacity at a reduced cost. CBM systems can provide boiler data that the advanced process control (APC) system can utilize for plant performance optimization, which is increasingly relevant as coal power plants shift from predominantly base-load operation to predominantly transient operation involving large load swings. The mMPMS is based on an electrochemical sensor that provides a real-time indication of the risk of damage to key locations in the radiant or convective section of a coal-fired boiler such as metal loss rates, heat flux, metal surface temperature, and deposit thickness. These indications can be utilized to optimize boiler performance as well as improve boiler availability in conjunction with corresponding operating conditions. This monitoring system was developed and tested in the high-temperature regions of coal-fired utility boilers in this project but can be applied to many other industries and applications as well. This project leveraged the existing electrochemical noise-based monitoring system and the new sensor design is small enough to be installed through the webbing of the waterwalls without the need for long shut-downs to bend tubes and to make it feasible to obtain high spatial resolution in the boiler. Data is transferred to the plant distributed control system (DCS) and any other control system. The sensor body that houses the sensor assembly was designed to ensure good conductive contact with boiler tubes to ensure the sensor is held at an identical temperature to the tube surface temperature. The data acquisition and signal conditioning modules were redesigned into a small footprint with optimized cooling of the module. System software was developed specifically for the new signal conditioning module and is compatible with plant PLCs. After the preliminary testing at a pilot-scale facility, the three mMPMS were installed at a full-scale pulverized coal-fired plant, PacifiCorp’s Hunter 3. The systems were demonstrated over 20,000 hours at the plant during regular operation. Also, the sensor data was fed to the plant’s advanced process control system to evaluate the corrosion control by the operation changes and utilized to understand the impacts of load cycling with different ramping up and down speeds. At the end of the project, the systems were converted to the permanent installation at the power plant to be used with the advanced process control system installed at the plant.

Advanced Sensors, Corrosion, Ash Deposition, Optim↗
DOE OSTI2019

Demonstration of Integrated Hazard Analysis for Digital Reactor Trip Systems

Digital instrumentation and control (I&C) upgrades are a vital research area for nuclear industry. Despite their performance benefits, deployment of digital I&C in nuclear power plants (NPPs) has been limited. Digital I&C systems exhibit complex failure modes including common cause failures (CCFs) which can be difficult to identify. This paper describes the development of a redundancy-guided application of the Systems-Theoretic Process Analysis (STPA) and Fault Tree Analysis (FTA) for the hazard analysis of digital I&C in advanced NPPs. The resulting Redundancy-guided System-theoretic Hazard Analysis (RESHA) is applied for the case study of a representative state-of-the-art digital reactor trip system. The analysis qualitatively and systematically identifies the most critical CCFs and other hazards of digital I&C systems. Ultimately, RESHA can help researchers make informed decisions for how, and to what degree, defensive measures such as redundancy, diversity, and defense-in-depth can be used to mitigate or eliminate the potential hazards of digital I&C systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗