Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

srlife : A software tool for estimating the life of high temperature concentrating solar receivers. Part II – Ceramic receivers

As Concentrating Solar Power (CSP) technologies aim for higher operating temperatures to enhance efficiency and meet industrial process heat demands, high-temperature metallic materials, including nickel-based superalloys, face challenges in maintaining structural integrity. Advanced ceramics offer a promising alternative due to their superior high-temperature strength. However, accurately assessing the performance of ceramic components requires a fundamentally different approach from that used for metallic components. This Part II of a two-part paper describes the integration of ceramic statistical failure models within srlife – an open-source tool for predicting the life of high-temperature CSP receivers. These models account for the inherent variability in ceramic strength, as well as the effects of subcritical crack growth (SCG) under high temperature cyclic loads. Here, the paper includes an example problem that demonstrate the process of evaluating ceramic receivers using srlife. Part I details the life estimation process for metallic receivers (i.e. creep-fatigue life) along with input and output data structure, thermohydraulic analysis, and structural analysis. The complete tool is available as open-source software at https://github.com/srlife-project/srlife and can be installed via the PyPi package manager (https://pypi.org). By supporting both ceramic and metallic receiver analyses, srlife facilitates fair comparisons between competing metallic and ceramic designs, enabling accurate evaluations of plant efficiency and the economic benefits of ceramic solar receivers and other components.

High temperature ceramic receivers↗

Representation of U.S. Warm Temperature Extremes in Global Climate Model Ensembles

Extreme temperature events can have considerable negative impacts on sectors such as health, agriculture, and transportation. Observational evidence indicates the severity and frequency of warm extremes are increasing over much of the United States, but there are sizeable challenges both in estimating extreme temperature changes and in quantifying the relevant associated uncertainties. This study provides a simple statistical framework using a block maxima approach to analyze the representation of warm temperature extremes in several recent global climate model ensembles. Uncertainties due to structural model differences, grid resolution, and internal variability are characterized and discussed. Results show that models and ensembles differ greatly in the representation of extreme temperature over the United States, and variability in tail events is dependent on time and anthropogenic warming, which can influence estimates of return periods and distribution parameter estimates using generalized extreme value (GEV) distributions. These effects can considerably influence the uncertainty of model hindcasts and projections of extremes. Several idealized regional applications are highlighted for evaluating ensemble skill and trends, based on quantile analysis and root-mean-square errors in the overall sample and the upper tail. The results are relevant to regional climate assessments that use global model outputs and that are sensitive to extreme warm temperature. Accompanying this manuscript is a simple toolkit using the R statistical programming language for characterizing extreme events in gridded datasets.

54 ENVIRONMENTAL SCIENCES↗

Updating Critical Temperature Calculations for Several Secondary High Explosives

In designing experiments where high explosives (HEs) are heated, it is important to have an understanding of where thermal runaway may occur. This determination is often done by using the Frank-Kamenetskii (FK) equation. For several highly-studied HEs, the parameters necessary for FK calculations are typically referenced from decades-old literature, and more recent experimental data have shown that these values require adjustment. For example, some of the legacy parameters dangerously overpredict the critical temperature by tens of degrees relative to more recent observed values. Herein, we first summarize historical results and highlight the importance of insulation effects when estimating critical temperatures for small samples, which is especially relevant to small-scale aging, compatibility, and characterization experiments. Here, we then present updated FK parameters for several common secondary CHNO HEs like RDX, HMX, PETN, and TATB, as well as the first reported values for 2,6-Diamino-3,5-dinitropyrazine-1-oxide (LLM-105). Our updated parameters produce critical-temperature curves that are consistent with both mm-scale differentical scanning calorimetry (DSC) measurements and cm-scale data from the Lawrence Livermore National Laboratory one-dimensional time-to-explosion (ODTX) experiment. In analyzing the critical temperature versus sample size curves derived from the transcendental FK equation, we discovered that these curves are remarkably well described by a simple power-law function with a universal power of 0.142 and a HE-specific scaling factor.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

MULTI-FILTER LIGHT CURVES OF 29 VERY SHORT PERIOD CANDIDATE CONTACT BINARIES

Light curves of 26 probable contact binary stars are made available, from a list of candidates with the shortest periods known. This is supplemented by sets of light curves of three previously studied systems. Photometry was obtained in the Johnson UBV, Cousins RI system. All stars but one were observed in four wavebands, either UBV R{sub C} or BV(RI){sub C}, depending on brightness. Tentative spectral classifications are given for 23 of the stars. Effective temperatures are derived from infrared and optical photometric indices, and from spectral types. These are generally in good agreement. The multicolor photometry, spectral typing, and estimated effective temperatures can be used to model these systems in detail. A preliminary study, based on Fourier coefficients of the light curves, suggests that all the systems are indeed eclipsing stars, with all but a handful probably in contact configurations.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of Superparamagnetism in Microwave and Conventional Processed Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} Nanoparticles

Nanoparticles of spinel cubic Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} are first prepared by the coprecipitation method and then subjected to conventional solid-state sintering and microwave processing techniques. Particle sizes are estimated by field emission scanning electron microscopy (FESEM) to be in the nanometer (5–13 nm) range. Transmission electron microscopy (TEM) also supports the FESEM data. The magnetization measurement by vibration sample magnetometry of the conventionally sintered sample shows a paramagnetic nature at room temperature, a superparamagnetic behaviour at low temperature, and a ferromagnetic nature at even lower temperature. The blocking temperature is estimated to be nearly 110 K. Microwave-processed samples show a superparamagnetic nature even at room temperature. The Fe{sup 3+} cations are found at both the sites confirmed by X-ray photoelectron spectroscopy (XPS), are prepared by microwave processing, and have better magnetic properties as compared to the conventionally sintered particles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Indirect sensing of atmospheric temperature and water vapor using microwaves.

A prototype of the Nimbus E microwave spectrometer was flown in an airplane over various atmospheric and surface conditions. Effects of clouds and the terrestrial surface on the data are discussed. Using a multiple-regression statistical method of inverting the equation of radiative transfer, estimates of temperature and integrated contents of water vapor and liquid water in the atmosphere below the aircraft were made from the microwave data obtained at high altitude. These estimates are compared with direct measurements made by other experiments on board the aircraft, in both clear atmospheres and in the presence of clouds.

Rosenkranz, P. W.↗

EVIDENCE FOR MULTIPLE PATHWAYS TO DEUTERIUM ENHANCEMENTS IN PROTOPLANETARY DISKS

The distributions of deuterated molecules in protoplanetary disks are expected to depend on the molecular formation pathways. We use observations of spatially resolved DCN emission from the disk around TW Hya, acquired during ALMA science verification with a {approx}3'' synthesized beam, together with comparable DCO{sup +} observations from the Submillimeter Array, to investigate differences in the radial distributions of these species and hence differences in their formation chemistry. In contrast to DCO{sup +}, which shows an increasing column density with radius, DCN is better fit by a model that is centrally peaked. We infer that DCN forms at a smaller radii and thus at higher temperatures than DCO{sup +}. This is consistent with chemical network model predictions of DCO{sup +} formation from H{sub 2}D{sup +} at T < 30 K and DCN formation from additional pathways involving CH{sub 2}D{sup +} at higher temperatures. We estimate a DCN/HCN abundance ratio of {approx}0.017, similar to the DCO{sup +}/HCO{sup +} abundance ratio. Deuterium fractionation appears to be efficient at a range of temperatures in this protoplanetary disk. These results suggest caution in interpreting the range of deuterium fractions observed in solar system bodies, as multiple formation pathways should be taken into account.

79 ASTRONOMY AND ASTROPHYSICS↗

SPECTRAL ENERGY DISTRIBUTIONS OF LOW-LUMINOSITY RADIO GALAXIES AT z {approx}1-3: A HIGH-z VIEW OF THE HOST/AGN CONNECTION

We study the spectral energy distributions, SEDs (from FUV to MIR bands), of the first sizeable sample of 34 low-luminosity radio galaxies at high redshifts, selected in the COSMOS field. To model the SEDs, we use two different template-fitting techniques: (1) the Hyperz code that only considers single stellar templates and (2) our own developed technique 2SPD that also includes the contribution from a young stellar population and dust emission. The resulting photometric redshifts range from z {approx} 0.7 to 3 and are in substantial agreement with measurements from earlier work, but significantly more accurate. The SED of most objects is consistent with a dominant contribution from an old stellar population with an age {approx}1-3 Multiplication-Sign 10{sup 9} years. The inferred total stellar mass range is {approx}10{sup 10}-10{sup 12} M {sub Sun }. Dust emission is needed to account for the 24 {mu}m emission in 15 objects. Estimates of the dust luminosity yield values in the range L {sub dust} {approx} 10{sup 43.5}-10{sup 45.5} erg s{sup -1}. The global dust temperature, crudely estimated for the sources with an MIR excess, is {approx}300-850 K. A UV excess is often observed with a luminosity in the range {approx}10{sup 42}-10{sup 44} erg s{sup -1} at 2000 A rest frame. Our results show that the hosts of these high-z low-luminosity radio sources are old massive galaxies, similar to the local FR Is. However, the UV and MIR excesses indicate the possible significant contribution from star formation and/or nuclear activity in such bands, not seen in low-z FR Is. Our sources display a wide variety of properties: from possible quasars at the highest luminosities to low-luminosity old galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Radiative heating of interstellar grains falling toward the solar nebula: 1-D diffusion calculations

As the dense molecular cloud that was the precursor of our Solar System was collapsing to form a protosun and the surrounding solar-nebula accretion disk, infalling interstellar grains were heated much more effectively by radiation from the forming protosun than by radiation from the disk's accretion shock. Accordingly, we have estimated the temperatures experienced by these infalling grains using radiative diffusion calculations whose sole energy source is radiation from the protosun. Although the calculations are 1-dimensional, they make use of 2-D, cylindrically symmetric models of the density structure of a collapsing, rotating cloud. The temperature calculations also utilize recent models for the composition and radiative properties of interstellar grains (Pollack et al. 1994. Astrophys. J. 421, 615-639), thereby allowing us to estimate which grain species might have survived, intact, to the disk accretion shock and what accretion rates and molecular-cloud rotation rates aid that survival. Not surprisingly, we find that the large uncertainties in the free parameter values allow a wide range of grain-survival results: (1) For physically plausible high accretion rates or low rotation rates (which produce small accretion disks), all of the infalling grain species, even the refractory silicates and iron, will vaporize in the protosun's radiation field before reaching the disk accretion shock. (2) For equally plausible low accretion rates or high rotation rates (which produce large accretion disks), all non-ice species, even volatile organics, will survive intact to the disk accretion shock. These grain-survival conclusions are subject to several limitations which need to be addressed by future, more sophisticated radiative-transfer models. Nevertheless, our results can serve as useful inputs to models of the processing that interstellar grains undergo at the solar nebula's accretion shock, and thus help address the broader question of interstellar inheritance in the solar nebula and present Solar System. These results may also help constrain the size of the accretion disk: for example, if we require that the calculations produce partial survival of organic grains into the solar nebula, we infer that some material entered the disk intact at distances comparable to or greater than a few AU. Intriguingly, this is comparable to the heliocentric distance that separates the C-rich outer parts of the current Solar System from the C-poor inner regions.

NASA Center ARC↗

Heat flux estimates over vegetation derived using radiometric surface temperatures and a boundary layer model in comparison with sodar-derived values

An attempt was made to validate a method that uses radiometric surface temperatures and a boundary layer model to estimate surface energy budgets and characteristics. Surface temperatures from a hand-held radiometer and sodar data were collected simultaneously on seven days between mid-July and mid-October 1980. The comparison of the RDMS and sodar heat fluxes proved disappointing. Free convection conditions, required to produce sodar-derived heat fluxes, were inhibited by a terrain-induced low level inversion. Only three out of seven cases produced meaningful sodar heat fluxes. Of those three cases, one had good agreement and the other two had sodar heat fluxes 15 to 45 w/sq m lower than the RDMS values. Since the RDMS method is relatively untested, it was impossible to conclusively determine its validity from the results. There was evidence that the true heat flux was not underestimated by the RDMS, so it could be concluded that the Bowen ratios over well-watered vegetation were likely to be quite small.

Cooper, J. N.↗

Lessons Learned from Assimilating Altimeter Data into a Coupled General Circulation Model with the GMAO Augmented Ensemble Kalman Filter

Satellite altimetry measurements have provided global, evenly distributed observations of the ocean surface since 1993. However, the difficulties introduced by the presence of model biases and the requirement that data assimilation systems extrapolate the sea surface height (SSH) information to the subsurface in order to estimate the temperature, salinity and currents make it difficult to optimally exploit these measurements. This talk investigates the potential of the altimetry data assimilation once the biases are accounted for with an ad hoc bias estimation scheme. Either steady-state or state-dependent multivariate background-error covariances from an ensemble of model integrations are used to address the problem of extrapolating the information to the sub-surface. The GMAO ocean data assimilation system applied to an ensemble of coupled model instances using the GEOS-5 AGCM coupled to MOM4 is used in the investigation. To model the background error covariances, the system relies on a hybrid ensemble approach in which a small number of dynamically evolved model trajectories is augmented on the one hand with past instances of the state vector along each trajectory and, on the other, with a steady state ensemble of error estimates from a time series of short-term model forecasts. A state-dependent adaptive error-covariance localization and inflation algorithm controls how the SSH information is extrapolated to the sub-surface. A two-step predictor corrector approach is used to assimilate future information. Independent (not-assimilated) temperature and salinity observations from Argo floats are used to validate the assimilation. A two-step projection method in which the system first calculates a SSH increment and then projects this increment vertically onto the temperature, salt and current fields is found to be most effective in reconstructing the sub-surface information. The performance of the system in reconstructing the sub-surface fields is particularly impressive for temperature, but not as satisfactory for salt.

Keppenne, Christian↗

Variability in modelled reservoir greenhouse gas emissions: comparison of select US hydropower reservoirs against global estimates

Abstract Greenhouse gas (GHG) emissions from reservoirs have most often been evaluated on a global extent through areal scaling or linear-regression models. These models typically rely on a limited number of characteristics such as age, size, and average temperature to estimate per reservoir or areal flux. Such approaches may not be sufficient for describing conditions at all types of reservoirs. Emissions from hydropower reservoirs have received increasing attention as industry and policy makers seek to better understand the role of hydropower in sustainable energy solutions. In the United States (US), hydropower reservoirs span a wide range of climate regions and have diverse design and operational characteristics compared to those most heavily represented in model literature (i.e., large, tropical reservoirs). It is not clear whether estimates based on measurements and modeling of other subsets of reservoirs describe the diverse types of hydropower reservoirs in the US. We applied the Greenhouse Gas from Reservoirs (G‐res) emissions model to 28 hydropower reservoirs located in a variety of ecological, hydrological, and climate settings that represent the range of sizes and types of facilities within the US hydropower fleet. The dominant pathways for resulting GHG emissions estimates in the case-study reservoirs were diffusion of carbon dioxide, followed by methane ebullition. Among these case-study reservoirs, total post-impoundment areal flux of carbon ranges from 84 to 767 mgCm −2 d −1 , which is less variable than what has been reported through measurements at other US and global reservoirs. The net GHG reservoir footprint was less variable and towards the lower end of the range observed from modeling larger global reservoirs, with a range of 138 to 1,052 g CO 2 eq m −2 y −1 , while the global study reported a range of 115 to 145,472 g CO 2 eq m −2 y −1 . High variation in emissions normalized with respect to area and generation highlights the need to be cautious when using area or generation in predicting or communicating emissions footprints for reservoirs relative to those of other energy sources, especially given that many of the hydropower reservoirs in the US serve multiple purposes beyond power generation.

54 ENVIRONMENTAL SCIENCES↗

Multimodal Characterization of Crystal Structure and Formation in Rubrene Thin Films Reveals Erasure of Orientational Discontinuities

Abstract Multimodal multiscale characterization provide opportunities to study organic semiconducting thin films with multiple length scales, across multiple platforms, to elucidate crystallization mechanisms of the various microstructures that impact functionality. With polarized scanning transmission X‐ray and 4D‐scanning transmission electron microscopy, hybrid crystalline structures in rubrene thin films in which large crystalline domains surround a common nucleus and transition to a spherulite morphology at larger radii is observed. These high‐resolution techniques reveal how azimuthal orientational discontinuities at smaller radii are erased as spherulite morphology takes hold. In situ crystallization in the films with optical microscopy is also captured, discovering the importance of considering the initial temperature increase of a film during thermal annealing over the crystallization timescale. This kinetic information of the radial crystallization rate and of corresponding film heating kinetics is used to estimate the temperature at which the larger crystalline regions transition into a spherulite. By combining the results obtained from the different characterization modes, it is learned that thermal conditions can sensitively affect the crystallization of rubrene and other organic thin films. The observations suggest opportunities for more complex temperature‐dependent processing to maximize hybrid structures’ functionality in organic thin films and demonstrate that multimodal studies deepen the understanding of structure‐function dynamics.

Tan, Jenna A.↗

Set up of an experimental apparatus for the study of fragmentation of solid fuels upon severe heating

An experimental apparatus has been developed in order to perform tests of primary fragmentation of solid fuels under severe heating conditions. The device is a modified heated strip reactor, capable to reach 2000 C in less than 0.2 s. Particles are laid on the strip and pyrolysed under inert or moderately oxidizing conditions. The char particles and their fragments, generated upon pyrolysis, can be recovered and analysed to assess the fragmentation propensity of the fuel. Some preliminary experiments have been carried out on two biomass samples in order to assess the time-temperature history of particles in the experimental apparatus. In particular biomass particles of approximately 2-3 mm have been used. The temperature of the heated strip reactor in such preliminary tests was varied between 1000 and 1600 C, while the strip nominal heating rate was kept at 10{sup 4} C/s and the holding time was set at the value of 10 s. A near infrared fast camera (38,000 frames/s) has been used to measure the temperature of the heated strip and of the particles during the tests. A heat up model was developed and validated against experimental results. The model was then used to estimate the temperature gradients across particles of biomass and of coal as well. Results show that the strip of the reactor reaches the set temperature in less than 0.2 s. When particles are laid on the strip, their bottom surface, which is in physical contact with the strip, immediately reaches the set temperature value. For 1 mm coal particles the upper surface can be considered at the same temperature as well. Under the most severe conditions tested (strip temperature of 1600 C, biomass particles of 2 mm thickness) the temperature difference between the bottom and the upper face is 200 C after 3 s and drops to 100 C after 10 s. On the whole the experimental apparatus simulates uniform heating of the particles with reasonable approximation. In the next future the apparatus will be further upgraded to operate at pressures up to 20 bars. (author)

01 COAL, LIGNITE, AND PEAT↗

Electron density profile measurements at a self-focusing ion beam with high current density and low energy extracted through concave electrodes

The self-focusing phenomenon has been observed in a high current density and low energy ion beam. In order to study the mechanism of this phenomenon, a special designed double probe to measure the electron density and temperature is installed into the chamber where the high current density ion beam is injected. Electron density profile is successfully measured without the influence of the ion beam components. Estimated electron temperature and density are ∼0.9 eV and ∼8 × 10{sup 8} cm{sup −3} at the center of ion beam cross section, respectively. It was found that a large amount of electrons are spontaneously accumulated in the ion beam line in the case of self-forcing state.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Melting temperatures of the ZrO{sub 2}-MOX system

Severe accidents occurred at the Fukushima Daiichi Nuclear Power Plant Units 1-3 on March 11, 2011. MOX fuels were loaded in the Unit 3. For the thermal analysis of the severe accident, melting temperature and phase state of MOX corium were investigated. The simulated coriums were prepared from 4%Pu-containing MOX, 8%Pu-containing MOX and ZrO{sub 2}. Then X-ray diffraction, density and melting temperature measurements were carried out as a function of zirconium and plutonium contents. The cubic phase was observed in the 25%Zr-containing corium and the tetragonal phase was observed in the 50% and 75%Zr-containing coria. The lattice parameter and density monotonically changed with Pu content. Melting temperature increased with increasing Pu content; melting temperature were estimated to be 2932 K for 4%Pu MOX corium and 3012 K for 8%Pu MOX corium in the 25%ZrO{sub 2}-MOX system. The lowest melting temperature was observed for 50%Zr-containing corium. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluating near-surface soil moisture using Heat Capacity Mapping Mission data

Four dates of Heat Capacity Mapping Mission (HCMM) data were analyzed in order to evaluate HCMM thermal data use in estimating near-surface soil moisture in a complex agricultural landscape. Because of large spatial and temporal ground cover variations, HCMM radiometric temperatures alone did not correlate with soil water content. The radiometric temperatures consisted of radiance contributions from different canopies and their respective soil backgrounds. However, when surface soil temperatures were empirically estimated from HCMM temperatures and percent cover of each pixel, a highly significant correlation was obtained between the estimated soil temperatures and near-surface soil water content.

Heilman, J. L.↗

Multimodel Surface Temperature Responses to Removal of U.S. Sulfur Dioxide Emissions

Abstract Three Earth System models are used to derive surface temperature responses to removal of U.S. anthropogenic SO 2 emissions. Using multicentury perturbation runs with and without U.S. anthropogenic SO 2 emissions, the local and remote surface temperature changes are estimated. In spite of a temperature drift in the control and large internal variability, 200 year simulations yield statistically significant regional surface temperature responses to the removal of U.S. SO 2 emissions. Both local and remote surface temperature changes occur in all models, and the patterns of changes are similar between models for northern hemisphere land regions. We find a global average temperature sensitivity to U.S. SO 2 emissions of 0.0055 K per Tg(SO 2 ) per year with a range of (0.0036, 0.0078). We examine global and regional responses in SO 4 burdens, aerosol optical depths (AODs), and effective radiative forcing (ERF). While changes in AOD and ERF are concentrated near the source region (United States), the temperature response is spread over the northern hemisphere with amplification of the temperature increase toward the Arctic. In all models, we find a significant response of dust concentrations, which affects the AOD but has no obvious effect on surface temperature. Temperature sensitivity to the ERF of U.S. SO 2 emissions is found to differ from the models' sensitivity to radiative forcing of doubled CO 2 .

Conley, A. J.↗