Search NASA⌕ Search

SEARCH · Search NASA

Results for “Training Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Hacking Limnology Workshop and DSOS22: Creating a Community of Practice for the Nexus of Data Science, Open Science, and the Aquatic Sciences

The 2nd Aquatic Ecosystem Modeling-Junior (AEMON-J) Hacking Limnology Workshop and 3rd Virtual Summit: Incorporating Data Science and Open Science in the Aquatic Sciences (DSOS) took place on 25–29 July 2022. These virtual events were developed to bring together researchers from diverse backgrounds to share developments in data-intensive research in the aquatic sciences and train participants in cutting-edge data analysis methods related to remote sensing, data pipelines, and modeling of aquatic ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Differentiable hybrid neural network approach for enhancing reactor dynamics simulations

Reactor dynamics simulations provide essential insights into the time-dependent behavior of nuclear reactors under various operating conditions. However, high-fidelity simulations can be computationally intensive, requiring significant computational resources. Here, to address this challenge, this study employs a differentiable hybrid model that utilizes neural networks as a corrector to enhance the performance of a low-fidelity simulation, aligning its predictions with those of a high-fidelity simulation. Low-fidelity and high-fidelity simulations were obtained by adjusting the mesh size in the System Dynamics Analysis Tool. The differentiable hybrid model was trained in two approaches: time-step-wise and sequence-wise. It was then applied to simulate various transients in a molten salt reactor. Its performance was evaluated by comparing its responses to transients against those of the high-fidelity simulation. An additional approach was performed using a data-driven model to correct the low-fidelity simulation. In comparison, the differentiable hybrid model showed significant improvements in transient prediction, effectively addressing the limitations of the low-fidelity simulations. The results highlighted the robustness of the differentiable hybrid model in both training approaches. It delivered simulations that were at least 3.8 times faster than high-fidelity models. In the time-step-wise approach, it achieved at least a 39% improvement in accuracy. In the sequence-wise approach, it showed at least an 81% accuracy improvement over the full transient. This approach offers a promising path for improving computational efficiency without compromising accuracy in nuclear reactor simulations, making it suitable for real-time digital twin applications.

42 - ENGINEERING↗

MADLens, a python package for fast and differentiable non-Gaussian lensing simulations

Here, we present MADLens a python package for producing non-Gaussian lensing convergence maps at arbitrary source redshifts with unprecedented precision. MADLens is designed to achieve high accuracy while keeping computational costs as low as possible. A MADLens simulation with only particles produces convergence maps whose power agrees with theoretical lensing power spectra up to within the accuracy limits of HaloFit. This is made possible by a combination of a highly parallelizable particle-mesh algorithm, a sub-evolution scheme in the lensing projection, and a machine-learning inspired sharpening step. Further, MADLens is fully differentiable with respect to the initial conditions of the underlying particle-mesh simulations and a number of cosmological parameters. These properties allow MADLens to be used as a forward model in Bayesian inference algorithms that require optimization or derivative-aided sampling. Another use case for MADLens is the production of large, high resolution simulation sets as they are required for training novel deep-learning-based lensing analysis tools. We make the MADLens package publicly available under a Creative Commons License

79 ASTRONOMY AND ASTROPHYSICS↗

Proteome-wide identification of predominant subcellular protein localizations in a bacterial model organism

Proteomics data provide unique insights into biological systems, including the predominant subcellular localization (SCL) of proteins, which can reveal important clues about their functions. Here we analyzed data of a complete prokaryotic proteome expressed under two conditions mimicking interaction of the emerging pathogen Bartonella henselae with its mammalian host. Normalized spectral count data from cytoplasmic, total membrane, inner and outer membrane fractions allowed us to identify the predominant SCL for 82% of the identified proteins. The spectral count proportion of total membrane versus cytoplasmic fractions indicated the propensity of cytoplasmic proteins to co-fractionate with the inner membrane, and enabled us to distinguish cytoplasmic, peripheral innermembrane and bona fide inner membrane proteins. Principal component analysis and k-nearest neighbor classification training on selected marker proteins or predominantly localized proteins, allowed us to determine an extensive catalog of at least 74 expressed outer membrane proteins, and to extend the SCL assignment to 94% of the identified proteins, including 18% where in silico methods gave no prediction. Suitable experimental proteomics data combined with straightforward computational approaches can thus identify the predominant SCL on a proteome-wide scale. Finally, we present a conceptual approach to identify proteins potentially changing their SCL in a condition-dependent fashion.

59 BASIC BIOLOGICAL SCIENCES↗

Framework development for a SAVY-4000 nuclear material storage container structural integrity surveillance tool

Here, this work presents the preliminary design of an automated surveillance tool to assess the health of SAVY-4000 nuclear material storage containers. This tool is designed by training several machine learning (ML) regression models to predict maximum residual stress in plain dents on the container sidewall. The model is trained on an experimentally validated Finite Element Analysis (FEA) model built in Abaqus FEA. The accuracy of each ML model is compared. The potential for application as well as model shortcomings are assessed. Necessary FEA model improvements are outlined and the various ML models are proposed.

36 MATERIALS SCIENCE↗

Data automation at light sources

Rapidly growing data volumes at light sources demand increasingly automated data collection, distribution, and analysis processes, in order to enable new scientific discoveries while not overwhelming finite human capabilities. We present here the case for automating and outsourcing light source science using cloud-hosted data automation and enrichment services, institutional computing resources, and high- performance computing facilities to provide cost-effective, scalable, and reliable implementations of such processes. We discuss three specific services that accomplish these goals for data distribution, automation, and transformation. In the first, Globus cloud-hosted data automation services are used to implement data capture, distribution, and analysis workflows for Advanced Photon Source and Advanced Light Source beamlines, leveraging institutional storage and computing. In the second, such services are combined with cloud-hosted data indexing and institutional storage to create a collaborative data publication, indexing, and discovery service, the Materials Data Facility (MDF), built to support a host of informatics applications in materials science. The third integrates components of the previous two projects with machine learning capabilities provided by the Data and Learning Hub for science (DLHub) to enable on-demand access to machine learning models from light source data capture and analysis workflows, and provides simplified interfaces to train new models on data from sources such as MDF on leadership scale computing resources. We draw conclusions about best practices for building next-generation data automation systems for future light sources.

Blaiszik, Ben↗

MORFOMETRYKA—A NEW WAY OF ESTABLISHING MORPHOLOGICAL CLASSIFICATION OF GALAXIES

We present an extended morphometric system to automatically classify galaxies from astronomical images. The new system includes the original and modified versions of the CASGM coefficients (Concentration C{sub 1}, Asymmetry A{sub 3}, and Smoothness S{sub 3}), and the new parameters entropy, H, and spirality σ{sub ψ}. The new parameters A{sub 3}, S{sub 3}, and H are better to discriminate galaxy classes than A{sub 1}, S{sub 1}, and G, respectively. The new parameter σ{sub ψ} captures the amount of non-radial pattern on the image and is almost linearly dependent on T-type. Using a sample of spiral and elliptical galaxies from the Galaxy Zoo project as a training set, we employed the Linear Discriminant Analysis (LDA) technique to classify EFIGI (Baillard et al. 4458 galaxies), Nair and Abraham (14,123 galaxies), and SDSS Legacy (779,235 galaxies) samples. The cross-validation test shows that we can achieve an accuracy of more than 90% with our classification scheme. Therefore, we are able to define a plane in the morphometric parameter space that separates the elliptical and spiral classes with a mismatch between classes smaller than 10%. We use the distance to this plane as a morphometric index (M{sub i}) and we show that it follows the human based T-type index very closely. We calculate morphometric index M{sub i} for ∼780k galaxies from SDSS Legacy Survey–DR7. We discuss how M{sub i} correlates with stellar population parameters obtained using the spectra available from SDSS–DR7.

79 ASTRONOMY AND ASTROPHYSICS↗

Training custom light curve models of SN Ia subpopulations selected according to host galaxy properties

ABSTRACT Type Ia supernova (SN Ia) cosmology analyses include a luminosity step function in their distance standardization process to account for an observed yet unexplained difference in the post-standardization luminosities of SNe Ia originating from different host galaxy populations [e.g. high-mass ($M \gtrsim 10^{10} \, {\rm M}_{\odot }$) versus low-mass galaxies]. We present a novel method for including host-mass correlations in the SALT3 (Spectral Adaptive Light curve Template 3) light curve model used for standardizing SN Ia distances. We split the SALT3 training sample according to host-mass, training independent models for the low- and high-host-mass samples. Our models indicate that there are different average Si ii spectral feature strengths between the two populations, and that the average spectral energy distribution of SNe from low-mass galaxies is bluer than the high-mass counterpart. We then use our trained models to perform an SN cosmology analysis on the 3-yr spectroscopically confirmed Dark Energy Survey SN sample, treating SNe from low- and high-mass host galaxies as separate populations throughout. We find that our mass-split models reduce the Hubble residual scatter in the sample, albeit at a low statistical significance. We do find a reduction in the mass-correlated luminosity step but conclude that this arises from the model-dependent re-definition of the fiducial SN absolute magnitude rather than the models themselves. Our results stress the importance of adopting a standard definition of the SN parameters (x0, x1, c) in order to extract the most value out of the light curve modelling tools that are currently available and to correctly interpret results that are fit with different models.

Taylor, G. (ORCID:0000000157563259)↗

Characterization of masses in digital breast tomosynthesis: Comparison of machine learning in projection views and reconstructed slices

Purpose: In digital breast tomosynthesis (DBT), quasi-three-dimensional (3D) structural information is reconstructed from a small number of 2D projection view (PV) mammograms acquired over a limited angular range. The authors developed preliminary computer-aided diagnosis (CADx) methods for classification of malignant and benign masses and compared the effectiveness of analyzing lesion characteristics in the reconstructed DBT slices and in the PVs. Methods: A data set of MLO view DBT of 99 patients containing 107 masses (56 malignant and 51 benign) was collected at the Massachusetts General Hospital with IRB approval. The DBTs were obtained with a GE prototype system which acquired 11 PVs over a 50 deg. arc. The authors reconstructed the DBTs at 1 mm slice interval using a simultaneous algebraic reconstruction technique. The region of interest (ROI) containing the mass was marked by a radiologist in the DBT volume and the corresponding ROIs on the PVs were derived based on the imaging geometry. The subsequent processes were fully automated. For classification of masses using the DBT-slice approach, the mass on each slice was segmented by an active contour model initialized with adaptive k-means clustering. A spiculation likelihood map was generated by analysis of the gradient directions around the mass margin and spiculation features were extracted from the map. The rubber band straightening transform (RBST) was applied to a band of pixels around the segmented mass boundary. The RBST image was enhanced by Sobel filtering in the horizontal and vertical directions, from which run-length statistics texture features were extracted. Morphological features including those from the normalized radial length were designed to describe the mass shape. A feature space composed of the spiculation features, texture features, and morphological features extracted from the central slice alone and seven feature spaces obtained by averaging the corresponding features from three to 19 slices centered at the central slice were compared. For classification of masses using the PV approach, a feature extraction process similar to that described above for the DBT approach was performed on the ROIs from the individual PVs. Six feature spaces obtained from the central PV alone and by averaging the corresponding features from three to 11 PVs were formed. In each feature space for either the DBT-slice or the PV approach, a linear discriminant analysis classifier with stepwise feature selection was trained and tested using a two-loop leave-one-case-out resampling procedure. Simplex optimization was used to guide feature selection automatically within the training set in each leave-one-case-out cycle. The performance of the classifiers was evaluated by the area (A{sub z}) under the receiver operating characteristic curve. Results: The test A{sub z} values from the DBT-slice approach ranged from 0.87{+-}0.03 to 0.93{+-}0.02, while those from the PV approach ranged from 0.78{+-}0.04 to 0.84{+-}0.04. The highest test A{sub z} of 0.93{+-}0.02 from the nine-DBT-slice feature space was significantly (p=0.006) better than the highest test A{sub z} of 0.84{+-}0.04 from the nine-PV feature space. Conclusion: The features of breast lesions extracted from the DBT slices consistently provided higher classification accuracy than those extracted from the PV images.

60 APPLIED LIFE SCIENCES↗

SCULPT (Supervised Clustering and Uncovering Latent Patterns with Training) v1

SCULPT (Supervised Clustering and Uncovering Latent Patterns with Training) is a comprehensive data visualization and analysis application focused on working with COLTRIMS (COLd Target Recoil Ion Momentum Spectroscopy) data, which is used in atomic and molecular physics experiments. The application offers several powerful features: - Data uploading and processing capabilities for COLTRIMS files - Multiple visualization methods using UMAP (Uniform Manifold Approximation and Projection) for dimensionality reduction - Interactive selection of data points across multiple views - Feature engineering through various methods: - Manual feature selection from calculated physics parameters - Deep autoencoder for dimension reduction - Genetic programming for discovering meaningful features - Mutual information-based feature selection - Multiple clustering approaches (DBSCAN, KMeans, Agglomerative) - Quality metrics for evaluating clustering results - Export capabilities for selections and generated features

Daoud, Hazem [Lawrence Berkeley National Laborator↗

EMT data generation

The integration of inverter-based resources (IBRs) in power systems is accelerating, bringing with it significant benefits such as reduced greenhouse gas emissions, improved grid resilience, and increased energy independence. Despite these advantages, the widespread adoption of IBRs introduces several challenges, including issues related to grid stability, increased operational complexity, and the need for updated regulatory frameworks. To address these challenges, IEEE released Standard 2800 in 2022, which sets forth the necessary interconnection capabilities and performance criteria for IBRs connected to transmission and sub-transmission systems. This standard outlines the performance requirements to ensure the reliable integration of IBRs into the bulk power system. Furthermore, in 2023, the North American Electric Reliability Corporation (NERC) published a reliability guideline for electromagnetic transient (EMT) modeling of BPS-connected IBRs. This guideline provides recommendations for developing EMT model requirements, performing model quality checks, and implementing verification practices specifically for EMT models representing BPS-connected inverter-based resources in reliability studies conducted by transmission planners and planning coordinators. These standards and guidelines have a profound impact on EMT studies for transmission networks, influencing system stability analyses, grid recovery and resynchronization processes, fault ride-through evaluations, protection and coordination strategies, advanced control methodologies, and the inclusion of IBRs in transient models of transmission networks. As a result, the generation of EMT data is crucial for conducting various transient-based studies to understand the impact of IBRs. EMT data generation use cases serve as the basis for scenarios in event detection and identification use cases, providing comprehensive details about EMT data generation for transmission grids with inverter-based resources. These use cases supply sufficient training and validation datasets for subsequent EMT analysis algorithms.

Xia, Qianxue↗

GRinding Automated Classification Engine

This work is an ML-driven framework for automated surface analysis of microscopy images. We create a training dataset by imaging stainless steel samples to benchmark four developed deep neural network architectures. These models, based on a YOLOv8n-cls backend, integrate image features and process metadata using various fusion methods to distinguish between acceptable and unacceptable surface finishes. This code is associated with publication "Classifying Alloy Surface Preparation Quality with Metadata-Infused Machine Learning for Rapid Alloy Discovery" for project APEX LDRD-ER (25-ERD-039)

Gongora, AldairE [Lawrence Livermore National Labo↗

Forced Component Estimation Statistical Method Intercomparison Project (ForceSMIP)

Anthropogenic climate change is unfolding rapidly, yet its regional manifestation can be obscured by internal variability. A primary goal of climate science is to identify the externally forced climate response from among the noise of internal variability. Separating the forced response from internal variability can be addressed in climate models by using a large ensemble to average over different possible realizations of internal variability. However, with only one realization of the real world, it is a major challenge to isolate the forced response directly in observations. In the Forced Component Estimation Statistical Method Intercomparison Project (ForceSMIP), contributors used existing and newly developed statistical and machine learning methods to estimate the forced response over 1950–2022 within individual realizations of the climate system. Participants used neural networks, linear inverse models, fingerprinting methods, and low-frequency component analysis, among other approaches. These methods were trained using large ensembles from multiple climate models and then applied to observations. Here, we evaluate method performance within large ensembles and investigate the estimates of the forced response in observations. Our results show that many different types of methods are skillful for estimating the forced response in climate models, though the relative skill of individual methods varies depending on the variable and evaluation metric. Methods with comparable skill in models can give a wide range of estimates of the forced response pattern in observations, illustrating the epistemic uncertainty in forced response estimates. ForceSMIP gives new insights into the forced response in observations, its uncertainty, and methods for its estimation.

Climate attribution↗

Estimation of Arrivals on Green at Signalized Intersections Using Stop-Bar Video Detection

Across the world, traffic congestion is increasing with alarming rapidity. Traffic signal control effectiveness, in coordinated networks, is often investigated in relation to the type of vehicle arrivals at the signalized intersections. Recently, several transportation agencies have switched from traditional loop detectors to video detection. When video cameras are accompanied by computer vision, one can extract more information about traffic “dynamics” than by using traditional inductive loop detectors. Collecting arrival times of multiple vehicles after the first arrival at the stop-bar detector might be challenging when using inductive loop detectors (since after the first arrival, detector status is always occupied). However, emerging video detection systems allow tracking of each vehicle’s entrance time in the detection zone, departure time from the detection zone, and the type of vehicle. This information can be used to estimate vehicular arrival and departure times, which then can be fed into machine learning algorithms to estimate arrivals on green (AOG). However, such research ideas have not been documented so far. Thus, this paper presents an estimation model for AOG, which was developed using multigene genetic programming. A robust experimental dataset was collected from a highly calibrated and validated microsimulation model of an 11-intersection corridor in Chattanooga, TN. The results of the model’s performance analysis showed the high accuracy of the training-, testing-, and validation datasets. The practical benefit of this model is that it can be applied to estimate arrival types at intersections where only stop-bar video detection exists.

Engineering↗

Dedicated Beamline Facilities for Catalytic Research. Synchrotron Catalysis Consortium (SCC)

Synchrotron spectroscopies offer unique advantages over conventional techniques, including higher detection sensitivity and molecular specificity, faster detection rate, and more in-depth information regarding the structural, electronic and catalytic properties under in-situ reaction conditions. Despite these advantages, synchrotron techniques are often underutilized or unexplored by the catalysis community due to various perceived and real barriers, which will be addressed in the current proposal. Since its establishment in 2005, the Synchrotron Catalysis Consortium (SCC) has coordinated significant efforts to promote the utilization of cutting-edge catalytic research under in-situ conditions. The purpose of the current renewal proposal is aimed to provide assistance, and to develop new sciences/techniques, for the catalysis community through the following concerted efforts: Coordinating the implementation of a suite of beamlines for catalysis studies at the new NSLS-II synchrotron source; Providing assistance and coordination for catalysis users at an SSRL catalysis beamline during the initial period of NSLS to NSLS II transition; Designing in-situ reactors for a variety of catalytic and electrocatalytic studies; Assisting experimental set-up and data analysis by a dedicated research scientist; Offering training courses and help sessions by the PIs and co-PIs.

01 COAL, LIGNITE, AND PEAT↗

Improving Fission Products at CARIBU: Near Field Detection (Q3/FY19 Quarterly Progress Report)

In the last quarter, Miguel Bencomo joined our group as a postdoc. Miguel got his PhD degree from Texas A&M University last December, where he was working on precision beta decay measurements, using techniques similar to the approach we use to measure branching ratios. We have been training him on how to use our analysis and simulation tools, as well as bringing him up to speed on the technical details of our experiment. The analysis and writing the manuscript for 95 Zr has been completed and are waiting for a feedback from Texas A&M collaborators. This process has been slightly delayed due to vacations and their obligations to other experiments at Texas A&M. We have begun working with Benjamin Schroeder (PhD student from Texas A&M), he is currently learning our analysis tools and looking at decay data of 95 Zr. Ben has just finalized his Master thesis and is very well positioned to start working with us, by first learning our analysis technique on 95 Zr proof-of-principle data, and next be responsible for analysis 156 Eu data that we plan to take later this year.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Improving Fission Products at CARIBU: Near Field Detection (Q2/FY21 Quarterly Progress Report)

The 95 Zr manuscript describing our experimental approach to measure branching ratios of long-lived fission products has been completed and successfully published in NIM A. This article is an important milestone in this effort and will serve as a great reference in any future reports describing results of other measurements we plan to perform. We have also expended our team, and Daniel Hoff joined us as a postdoc. We have been training him on how to use our analysis and simulation tools, as well as bringing him up to speed on the technical details of our experiment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

TSQP: Job Task Analysis

The purpose of this course is for you to learn the expectations of LANL and the DOE for the analysis phase of the Systematic Approach to Training.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗