Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Reactive Capture and Conversion of Carbon Dioxide to Methanol with ZnZrO 2 and Alkali-Promoted Mg 3 AlO x Mixed Oxide Catalytic Sorbents

Reactive capture and conversion (RCC) explores the use of a single-unit process to capture CO 2 and produce a product, in this case, methanol (MeOH). In this study, different configurations of a catalytic sorbent (CS) composed of ZnZrO 2 catalyst and Mg 3 AlO x sorbent with and without alkali modification are evaluated for CO 2 adsorption, steady-state catalysis with cofed CO 2 and H 2 , and transient RCC performance. A catalyst composed of a physical mixture of Mg 3 AlO x with ZnZrO 2 resulted in a slight increase in CO 2 uptake, with a low impact on the catalytic activity and RCC of the materials compared to ZnZrO 2 alone. In contrast, Na impregnation significantly increased the level of CO 2 uptake from 0.28 mmol/g (ZnZrO 2 alone) to 0.6 and 1.1 mmol/g for the CS with Na on the catalyst or Mg 3 AlO x , respectively. However, Na impregnation reduced the CO 2 conversion rate and MeOH selectivity during steady-state cofeed experiments at 300 °C and 6 bar. In contrast to steady-state catalysis conditions, RCC, which is a cyclic capture and conversion process, creates dynamic CO 2 and H 2 surface coverages, favoring CH 4 in the early stages of the conversion step and then CO and MeOH as the catalyst CO 2 coverage reduces. The highest MeOH productivity during RCC was achieved with CS that balanced the CO 2 uptake with only moderate catalyst rate reductions caused by Na addition. The optimal material, ZnZrO 2 +10%Na/Mg 3 AlO x , achieved a CO 2 uptake of 0.8 mmol/g and a MeOH productivity of 0.5 mmol/g with 100% selectivity at 260 °C and 6 bar during RCC. This marks the highest RCC MeOH productivity reported to date, although the process needs further optimization and even with optimization, may remain impractical. The results further demonstrate that optimization of catalytic sorbents under steady-state flow conditions does not easily correlate to transient capture and conversion cycles for methanol synthesis from CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced NO, CO and C 3 H 6 conversion on Pt/Pd catalysts: Impact of oxygen storage material and catalyst architecture

Simultaneous conversion of NO, CO and C 3 H 6 under stoichiometric conditions was carried out on washcoated monoliths containing oxygen storage material (OSM)-promoted mixed Platinum group metals (PGM: Pt(95 %)/Pd(5 %)), to evaluate OSM promotion and to identify the best architecture. The studied OSMs include ceria-zirconia (Ce 0.3 Zr 0.7 O 2 ; CZO) and mixed metal oxide spinel (Mn 0.5 Fe 2.5 O 4 ; MFO). PGM supported directly on the OSM was found to be the best design for CZO, leading to a ~70 °C simultaneous decrease in the light-off temperature (T 80 ; feed temperature giving 80 % conversion) for NO, CO and C 3 H 6 conversion compared to the alumina-supported PGM. Close coupling between the PGM and CZO is responsible for the activity promotion. In contrast, a dual-layer architecture (top PGM layer, bottom MFO layer) outperformed the MFO-supported PGM catalyst. The dual-layer PGM-MFO catalyst decreased the T 80 by ~50 °C for NO, CO and C 3 H 6 conversion compared to the PGM-only catalyst. Enhancement obtained with the dual-layer PGM-MFO architecture relies on a direct catalytic contribution from the spinel. During lean/rich modulation the addition of CZO or spinel helps to mitigate the detrimental impact of modulation on NO, CO and C 3 H 6 conversion above 400 °C. The data suggest that both CZO and MFO can buffer lean/rich modulation but exhibit preference to different reductants; CZO-supported PGM and dual-layer PGM-MFO show no conversion decrease during modulation for CO or C 3 H 6 modulation, respectively. Dynamic oxygen storage capacity (DOSC) measurements show that the spinel exhibits ~10 times higher DOSC than CZO for both CO and C 3 H 6 reductants. Both CO and C 3 H 6 are equally effective reductants for the MFO but CO is better for CZO and PGM-deposited CZO. The study provides useful insight into benefits of OSM and provides guidance for optimization of the multi-component PGM + OSM catalyst composition and architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pt/Ferric Hydroxyphosphate: An Effective Catalyst for the Selective Hydrogenation of α,β-Unsaturated Aldehydes (Ketones) into α,β-Unsaturated Alcohols

Four micro (nano)-sized mesoporous ferric hydroxyphosphates (FHP) are synthesized by a reverse microemulsion-solvothermal method, and then are used as supports to prepare supported Pt catalysts. The mean particle diameter of Pt nanoparticles (NPs) was 4.5–4.6 nm. When the four different Pt/FHP catalysts were used into the hydrogenation of α,β-unsaturated aldehydes (ketones) to their corresponding unsaturated alcohols, Pt/FHP (c) catalyst showed better catalytic performance than the other three partners. Under the optimal experimental conditions, several tested α,β-unsaturated aldehydes could be effectively transformed into corresponding unsaturated alcohols over Pt/FHP (c) catalyst. The catalyst could be recycled and reused several times without activity loss. We propose the stronger interaction between the Pt NPs and ferric ions of the FHP (c) are responsible for its good catalytic performance, and this stronger interaction should be rooted in its enhanced Lewis acid strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transport–Friendly Microstructure in SSC–MEA: Unveiling the SSC Ionomer–Based Membrane Electrode Assemblies for Enhanced Fuel Cell Performance

The significant role of the cathodic binder in modulating mass transport within the catalyst layer (CL) of fuel cells is essential for optimizing cell performance. This investigation focuses on enhancing the membrane electrode assembly (MEA) through the utilization of a short-side-chain perfluoro-sulfonic acid (SSC-PFSA) ionomer as the cathode binder, referred to as SSC-MEA. This study meticulously visualizes the distinctive interpenetrating networks of ionomers and catalysts, and explicitly clarifies the triple-phase interface, unveiling the transport-friendly microstructure and transport mechanisms inherent in SSC-MEA. The SSC-MEA exhibits advantageous microstructural features, including a better-connected ionomer network and well-organized hierarchical porous structure, culminating in superior mass transfer properties. Relative to the MEA bonded by long-side-chain perfluoro-sulfonic acid (LSC-PFSA) ionomer, noted as LSC-MEA, SSC-MEA exhibits a notable peak power density (1.23 W cm –2 ), efficient O 2 transport, and remarkable proton conductivity (65% improvement) at 65 °C and 70% relativity humidity (RH). These findings establish crucial insights into the intricate morphology-transport-performance relationship in the CL, thereby providing strategic guidance for developing highly efficient MEA.

25 ENERGY STORAGE↗

Multimetallic nanoparticle catalysts with enhanced electrooxidation

A new structure-control strategy to optimize nanoparticle catalysis is provided. The presence of Au in FePtAu facilitates FePt structure transformation from chemically disordered face centered cubic (fcc) structure to chemically ordered face centered tetragonal (fct) structure, and further promotes formic acid oxidation reaction (FAOR). The fct-FePtAu nanoparticles show high CO poisoning resistance, achieve mass activity as high as about 2810 mA/mg Pt, and retain greater than 90% activity after a 13 hour stability test.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective catalytic hydroalkylation and deoxygenation of substituted phenols to bicycloalkanes

Phenol and substituted phenols are hydroalkylated and hydrodeoxygenated to bi-cycloalkanes in a tandem reaction over Pd nanoclusters supported on a large-pore molecular sieve HBEA at 473-523 K using water as solvent. The HBEA-supported Pd catalyst (metal-acid ratio: 1:22 mol/mol) optimally balances the competing rates of metal catalyzed hydrogenation as well as of solid acid-catalyzed dehydration and carbon-carbon coupling to combine hydrodeoxygenation and dimerization of phenol derivatives to C{sub 12}-C{sub 18} bicycloalkanes in a single reaction sequence. A detailed kinetic study of the elementary reactions of (substituted) phenol and their potential products (cyclohexanol, cyclohexanone, and cyclohexene) demonstrates that phenol selectively reacts with the in situ generated cyclohexanol or cyclohexene on Broensted acid sites. The acid-catalyzed alkylation of phenol with alcohol intermediates and alcohol dehydration are parallel reactions, which are subtly influenced by the competing hydrogenation reactions as well as by the presence of water as solvent. IR spectroscopy of adsorbed species and preliminary molecular modeling indicate that phenol and cyclohexanol enrichment in the large pores of zeolite HBEA is critical for the high activity and hydroalkylation selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of Microwave-Assisted Preparation of TPA from Waste PET Using Response Surface Methodology

Terephthalic acid (TPA) was prepared from waste polyethylene terephthalate by microwave-assisted depolymerization with TOMAB as catalyst, the structure and properties of TPA were elucidated by using physico-chemical and spectroscopic methods. Single-factors experiments demonstrated that the TPA yield was affected significantly by the factors of catalyst and alkali amount, depolymerization temperature and time. The effects of variables, including catalyst and alkali amount, depolymerization temperature and time, on the TPA yield were evaluted by response surface methodology with a Box-Behnken design. The modified and verified experiments were completed after considering product performance and actual operation, the optimum parameters were determined to be TOMAB 2.7 g, 15% NaOH 260 mL, temperature 85 °C, degradation time 2.2 h. Under these conditions, the average yield of TPA in three replicated experiments is 97.53%, and this value is not significantly different from the value of 98.59% predicted by the model. These results demonstrate that this method is feasible.

36 MATERIALS SCIENCE↗

Effect of water droplet growth dynamics on electrode current in fuel-cell catalyst layers

Fuel cells are a promising next-generation energy-conversion technology designed to replace internal combustion engines in transportation applications. However, much work remains to optimize them. Operation at high humidities causes liquid water droplet formation on Pt catalyst particles during oxygen reduction, potentially impeding reactant arrival to the reactive electrode. In this work, four different cases of water droplet growth in fuel-cell catalyst layers are considered: pinned or advancing droplets on a bare Pt surface, advancing droplets on a Nafion film, and water-layer growth in carbon nanopores. Transient drop growth is captured with a combination of mass, species mass, and momentum balances, and the subsequent limiting current is determined via oxygen diffusion and Tafel kinetics. Further, water droplets are found not to be mass-transfer limiting due to the relatively large liquid-gas area compared to the Pt nanoparticle. Mass-transfer-limited behavior is calculated in carbon nanopores.

25 ENERGY STORAGE↗

Advanced Pt-Based Core–Shell Electrocatalysts for Fuel Cell Cathodes

Proton-exchange membrane fuel cells (PEMFCs) are highly efficient energy storage and conversion devices. Thus, the platinum group metal (PGM)-based catalysts which are the dominant choice for the PEMFCs have received extensive interest during the past couple of decades. However, the drawbacks in the existing PGM-based catalysts (i.e., high cost, slow kinetics, poor stability, etc.) still limit their applications in fuel cells. The Pt-based core–shell catalysts potentially alleviate these issues through the low Pt loading with the associated low cost and the high corrosion resistance and further improve the oxygen reduction reaction’s (ORR’s) activity and stability. This Account focuses on the synthetic strategies, catalytic mechanisms, factors influencing enhanced ORR performance, and applications in PEMFCs for the Pt-based core–shell catalysts. We first highlight the synthetic strategies for Pt-based core–shell catalysts including the galvanic displacement of an underpotentially deposited non-noble metal monolayer, thermal annealing, and dealloying methods, which can be scaled-up to meet the requirements of fuel cell operations. Subsequently, catalytic mechanisms such as the self-healing mechanism in the Pt monolayer on Pd core catalysts, the pinning effect of nitrogen (N) dopants in N-doped PtNi core–shell catalysts, and the ligand effect of the ordered intermetallic structure in L10-Pt/CoPt core–shell catalysts and their synergistic effects in N-doped L10-PtNi catalysts are described in detail. Additionally, the core–shell structure in the Pt-based catalysts have two main effects for enhanced ORR performance: (i) the interaction between Pt shells and core substrates can tune the electronic state of the surface Pt, thus boosting the ORR activity and stability, and (ii) the outer Pt shell with modest thickness can enhance the oxidation and dissolution resistance of the core, resulting in improved durability. We then review the recent attempts to optimize the ORR performance of the Pt-based core–shell catalysts by considering the shape, composition, surface orientation, and shell thickness. The factors influencing the ORR performance can be grouped into two categories: the effect of the core and the effect of the shell. In the former, PtM core–shell catalysts which use different non-PGM element cores (M) are summarized, and in the latter, Pt-based core–shell catalysts with different shell structures and compositions are described. The modifications of the core and/or shell structure can not only optimize the intermediate-binding energetics on the Pt surface through tuning the strain of the surface Pt, which increases the intrinsic activity and stability, but also offer a significantly decreased catalyst cost. Finally, we discuss the membrane electrode assembly performance of Pt-based core–shell catalysts in fuel cell cathodes and evaluate their potential in real PEMFCs for light-duty and heavy-duty vehicle applications. Even though some challenges to the activity and lifetime in the fuel cells remain, the Pt-based core–shell catalysts are expected to be promising for many practical PEMFC applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Pt/rGO catalysts with two different reducing agents and their methanol electrooxidation activity

Highlights: • Pt/rGO catalysts were successfully synthesized using either NaBH{sub 4} or ethylene glycol. • Synthesis using NaBH{sub 4} could improve electrocatalytic towards methanol oxidation of Pt/rGO catalyst. • 40%Pt/rGO synthesized using NaBH{sub 4} showed the best electrocatalytic performance. - Abstract: The synthesis processes of Platinum (Pt) on reduced graphene oxide (rGO) catalysts from graphene oxide (GO) using two reducing agents including sodium borohydride and ethylene glycol is reported. Structure and morphology of Pt/rGO catalysts are characterized by X-ray powder diffraction, transmission electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. Electrocatalytic methanol oxidation properties of these catalysts are evaluated by cyclic voltammetry and chronoamperometry. The results show that catalyst synthesized using sodium borohydride has a higher metallic Pt content and an improved catalytic performance in comparison to catalyst synthesized using ethylene glycol. Moreover, effect of Pt loading amount on electrocatalytic methanol oxidation performance of catalysts synthesized using sodium borohydride is systematically investigated. The optimal Pt loading amount on graphene is determined to be 40%.

36 MATERIALS SCIENCE↗

Highly-Active and Contaminant-Tolerant Cathodes for Durable Solid Oxide Fuel Cells (Final Report)

The objective of this project is to investigate the fundamental degradation methods occurring in solid oxide fuel cell (SOFC) cathodes when exposed to chromium and carbon dioxide contamination and to rationally design alkaline earth-based catalysts to increase stability and tolerance to contaminate poisoning. With a mechanistic and fundamental understanding of the degradation methods, advanced catalytic surface modifications can be applied to reduce degradation. The specific technical objectives are: (1) To identify/develop new catalysts (alkaline-earth based-) that are compatible chemically with the state-of-the-art cathode materials at high temperatures required for fabrication and with contaminates commonly encountered under operating conditions; (2) To improve the infiltration process for optimal control of the thickness, composition, and uniformity of the catalyst coatings; (3) To evaluate the electro-catalytic activity toward ORR of the chemically-stable materials when exposed to different types of contaminants using electrical conductivity relaxation measurements on bar samples and performance evaluation of catalyst-infiltrated cathodes; (4) To unravel the contamination-tolerant mechanisms of the new catalyst coatings under realistic environmental conditions (with different types of contaminants) using powerful in situ and in operando characterization techniques performed on model cells with thin-film/pattern electrodes, as guided by modeling and simulation; (5) To establish scientific basis for rational design of new catalysts of high tolerance to contaminants; (6) To validate the long term stability of modified LSCF cathodes in commercially available cells/stacks under ROC. Alkaline earth-based catalysts have been systematically explored and tested under various contamination conditions. BaCoO 3-δ (BCO) was shown to produce the best catalytic activity enhancement as well as stability in a variety of contaminating conditions, including CO 2 and chromium. The microstructural evolution was investigated with SEM, EDS, and Raman spectroscopy, showing the BCO catalyst prevents the formation of insulating SrCrO 4 by forming electrically conductive BaCrO 4 . Electrochemical relaxation measurements determined the BCO catalyst coatings increased the surface diffusion coefficient but did not significantly affect the diffusion coefficient and determined an optimum surface modification layer of 100 nm. A novel Ba 0.9 Co 0.7 Fe 0.2 Nb 0.1 O x (BCFN) catalyst was also shown to have excellent stability in chromium containing atmospheres. A novel surface sol-gel (SSG) surface modification, which offers superior thickness and compositional control, was applied to SOFCs to produce BaO catalyst coatings. SSG BaO coatings were shown to produce conformal coatings on the electrode surface, greatly increasing stability in chromium containing atmospheres. An atomic level mechanistic approach was applied to investigate the stability of PrBa 0.8 Ca 0.2 Co2O 5+δ (PBCC) with respect to a variety of common contaminants, demonstrating thermodynamically its superior stability in CO2 containing atmospheres. Finally, the best catalyst coatings demonstrated in this project, BCO and PBCC, were applied to full cells which demonstrated superior stability for over 300 hours in CO 2 and Cr atmospheres.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Highly-Active and Contaminant-Tolerant Cathodes for Durable Solid Oxide Fuel Cells

The objective of this project is to investigate the fundamental degradation methods occurring in solid oxide fuel cell (SOFC) cathodes when exposed to chromium and carbon dioxide contamination and to rationally design alkaline earth-based catalysts to increase stability and tolerance to contaminate poisoning. With a mechanistic and fundamental understanding of the degradation methods, advanced catalytic surface modifications can be applied to reduce degradation. The specific technical objectives are: (1) To identify/develop new catalysts (alkaline-earth based-) that are compatible chemically with the state-of-the-art cathode materials at high temperatures required for fabrication and with contaminates commonly encountered under operating conditions; (2) To improve the infiltration process for optimal control of the thickness, composition, and uniformity of the catalyst coatings; (3) To evaluate the electro-catalytic activity toward ORR of the chemically-stable materials when exposed to different types of contaminants using electrical conductivity relaxation measurements on bar samples and performance evaluation of catalyst-infiltrated cathodes; (4) To unravel the contamination-tolerant mechanisms of the new catalyst coatings under realistic environmental conditions (with different types of contaminants) using powerful in situ and in operando characterization techniques performed on model cells with thin-film/pattern electrodes, as guided by modeling and simulation; (5) To establish scientific basis for rational design of new catalysts of high tolerance to contaminants; (6) To validate the long term stability of modified LSCF cathodes in commercially available cells/stacks under ROC. Alkaline earth-based catalysts have been systematically explored and tested under various contamination conditions. BaCoO 3-δ (BCO) was shown to produce the best catalytic activity enhancement as well as stability in a variety of contaminating conditions, including CO 2 and chromium. The microstructural evolution was investigated with SEM, EDS, and Raman spectroscopy, showing the BCO catalyst prevents the formation of insulating SrCrO 4 by forming electrically conductive BaCrO 4 . Electrochemical relaxation measurements determined the BCO catalyst coatings increased the surface diffusion coefficient but did not significantly affect the diffusion coefficient and determined an optimum surface modification layer of 100 nm. A novel Ba 0.9 Co 0.7 Fe 0.2 Nb 0.1 O x (BCFN) catalyst was also shown to have excellent stability in chromium containing atmospheres. A novel surface sol-gel (SSG) surface modification, which offers superior thickness and compositional control, was applied to SOFCs to produce BaO catalyst coatings. SSG BaO coatings were shown to produce conformal coatings on the electrode surface, greatly4 increasing stability in chromium containing atmospheres. An atomic level mechanistic approach was applied to investigate the stability of PrBa 0.8 Ca 0.2 Co 2 O 5+δ (PBCC) with respect to a variety of common contaminants, demonstrating thermodynamically its superior stability in CO 2 containing atmospheres. Finally, the best catalyst coatings demonstrated in this project, BCO and PBCC, were applied to full cells which demonstrated superior stability for over 300 hours in CO 2 and Cr atmospheres.

30 DIRECT ENERGY CONVERSION↗

Highly-Active and Contaminant-Tolerant Cathodes for Durable Solid Oxide Fuel Cells

The objective of this project is to investigate the fundamental degradation methods occurring in solid oxide fuel cell (SOFC) cathodes when exposed to chromium and carbon dioxide contamination and to rationally design alkaline earth-based catalysts to increase stability and tolerance to contaminate poisoning. With a mechanistic and fundamental understanding of the degradation methods, advanced catalytic surface modifications can be applied to reduce degradation. The specific technical objectives are: (1) To identify/develop new catalysts (alkaline-earth based-) that are compatible chemically with the state-of-the-art cathode materials at high temperatures required for fabrication and with contaminates commonly encountered under operating conditions; (2) To improve the infiltration process for optimal control of the thickness, composition, and uniformity of the catalyst coatings; (3) To evaluate the electro-catalytic activity toward ORR of the chemically-stable materials when exposed to different types of contaminants using electrical conductivity relaxation measurements on bar samples and performance evaluation of catalyst-infiltrated cathodes; (4) To unravel the contamination-tolerant mechanisms of the new catalyst coatings under realistic environmental conditions (with different types of contaminants) using powerful in situ and in operando characterization techniques performed on model cells with thin-film/pattern electrodes, as guided by modeling and simulation; (5) To establish scientific basis for rational design of new catalysts of high tolerance to contaminants; (6) To validate the long term stability of modified LSCF cathodes in commercially available cells/stacks under ROC. Alkaline earth-based catalysts have been systematically explored and tested under various contamination conditions. BaCoO 3-δ (BCO) was shown to produce the best catalytic activity enhancement as well as stability in a variety of contaminating conditions, including CO 2 and chromium. The microstructural evolution was investigated with SEM, EDS, and Raman spectroscopy, showing the BCO catalyst prevents the formation of insulating SrCrO 4 by forming electrically conductive BaCrO 4 . Electrochemical relaxation measurements determined the BCO catalyst coatings increased the surface diffusion coefficient but did not significantly affect the diffusion coefficient and determined an optimum surface modification layer of 100 nm. A novel Ba 0.9 Co 0.7 Fe 0.2 Nb 0.1 O x (BCFN) catalyst was also shown to have excellent stability in chromium containing atmospheres. A novel surface sol-gel (SSG) surface modification, which offers superior thickness and compositional control, was applied to SOFCs to produce BaO catalyst coatings. SSG BaO coatings were shown to produce conformal coatings on the electrode surface, greatly 4 increasing stability in chromium containing atmospheres. An atomic level mechanistic approach was applied to investigate the stability of PrBa 0.8 Ca 0.2 Co 2 O 5+δ (PBCC) with respect to a variety of common contaminants, demonstrating thermodynamically its superior stability in CO 2 containing atmospheres. Finally, the best catalyst coatings demonstrated in this project, BCO and PBCC, were applied to full cells which demonstrated superior stability for over 300 hours in CO 2 and Cr atmospheres

01 COAL, LIGNITE, AND PEAT↗

Correlating surface adsorbate configuration and electrochemical performance of IrO 2 during seawater-relevant electrolysis

Seawater electrolysis alleviates freshwater demand to produce clean hydrogen while eliminating the need for water purification steps. The anodic process, seawater oxidation, typically requires high overpotentials and yields low selectivity to oxygen via the oxygen evolution reaction (OER), primarily due to the competing chlorine evolution reaction (CER) and hypochlorite evolution reaction (HCER) in pH-neutral conditions. Here, combining in situ surface-enhanced Raman characterization, grand canonical density functional theory-based calculations, and kinetic Monte Carlo simulations, we report the evolution of surface adsorbate configurations driven by applied potential and pH during seawater-relevant OER over IrO 2 , a highly OER-active and chloride-corrosion-resistant catalyst. As a result, the chemical properties of active sites, and thereby the kinetics of OER and CER/HCER, are effectively tuned. However, it is revealed that there is no optimal combination of potential and pH to achieve both high activity and high selectivity for seawater-relevant OER. To address this limitation, we establish a correlation between activity/selectivity and surface adsorbate configurations, enabling the optimization of highly active and OER-selective IrO 2 -based catalysts in seawater-relevant oxidation by modulating the local adsorbate environment of active sites.

08 HYDROGEN↗

Process Systems Engineering Perspective on the Design of Materials and Molecules

This paper aims to provide an overview of the current state of the art in molecule and material design and a perspective on open questions. First, we discuss the interplay between process design and the design of molecules and materials and then present the basic trade-offs and interdependencies that need to be considered in this integrated design problem. Second, we introduce methods and open questions in the area of processing materials, with special emphasis placed on heterogeneous catalysts due to their importance in the chemical industry. Finally, we discuss materials for photovoltaic cells as one example of a chemical product that is likely to help supply sustainable energy and address climate change concerns. This information presented here is based on presentations and discussions during the FIPSE-4 meeting in June 2018 (https://www.fi-in-pse.org/fipse-4- 2018).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy Flows in Static and Programmable Catalysts

Programmable catalysts that change on the time scale of a catalytic cycle provide a new opportunity to control the flow of energy to reactants and products to promote faster and more selective chemistry. While traditional chemical manufacturing processes consume energy to achieve favorable reaction conditions, programmable catalysts aim to dynamically add or remove energy to catalytic cycles through perturbations of the catalytic surface via strain, charge, or light. These surface energy flows are quantified by the changes in adsorbate binding energy with time, and the overall efficiency relating energy inputs to catalytic performance is defined by the characteristics of the undulating catalytic surface. Here, understanding and quantifying energy flows in programmable catalysts provides baseline definitions and metrics for comparing dynamic conditions and identifying optimal catalytic performance for more efficient chemical manufacturing.

Binding energy↗

Catalytic conversion of cellulose and its derived sugars to 5-Hydroxymethylfurfural, levulinate esters, and sorbitol: a comprehensive review

Cellulose, an abundant, renewable, and sustainable non-edible carbon source from agriculture and forestry, has attracted great attention for producing diverse value-added chemicals and fuels. However, the rigid 3D structure of cellulose, maintained by an extensive hydrogen bonding network, hinders chemical conversion, requiring effective pretreatment to break down the crystalline structure. High-value cellulose-derived compounds such as 5-hydroxymethylfurfural (5-HMF), levulinate esters, and sorbitol, recognized as critical platform chemicals by the U.S. Department of Energy, are particularly attractive for versatile applications. This review provides a comprehensive overview of methodologies for the chemical synthesis of 5-HMF, levulinate esters, and sorbitol, focusing on direct catalytic conversion of cellulose. It delves into recent advancements in reaction systems and catalysts, highlighting catalytic pathways, selectivity, strategies for process optimization, and computational approaches, while discussing the challenges associated with the catalytic conversion of cellulose into these high-value products and offering potential strategies for enhancing future catalytic processes.

Huang, Kaixuan [Yancheng Teachers Univ. (China); N↗

Many Body Methods from Chemistry to Physics: Novel Computational Techniques for Materials-Specific Modelling: A Computational Materials Science and Chemistry Network

Understanding the behavior of interacting electrons in molecules and solids so that one can predict new superconductors, catalysts, light harvesters, energy and battery materials and optimize existing ones is the ``quantum many-body problem’’. This is one of the scientific grand challenges of the 21 st century. A complete solution to the problem has been proven to be exponentially hard, meaning that straightforward numerical approaches fail. New insights and new methods are needed to provide accurate yet feasible approximate solutions. This CMSCN project brought together chemists and physicists to combine insights from the two disciplines to develop innovative new approaches. Outcomes included the Density Matrix Embedding method, a new, computationally inexpensive and extremely accurate approach that may enable first principles treatment of superconducting and magnetic properties of strongly correlated materials, new techniques for existing methods including an Adaptively Truncated Hilbert Space approach that will vastly expand the capabilities of the dynamical mean field method, a self-energy embedding theory and a new memory-function based approach to the calculations of the behavior of driven systems. The methods developed under this project are now being applied to improve our understanding of superconductivity, to calculate novel topological properties of materials and to characterize and improve the properties of nanoscale devices.

36 MATERIALS SCIENCE↗