Search NASA⌕ Search

SEARCH · Search NASA

Results for “clouds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Properties of Arctic liquid and mixed-phase clouds from shipborne Cloudnet observations during ACSE 2014

This article presents Cloudnet retrievals of Arctic clouds from measurements conducted during a 3-month research expedition along the Siberian shelf during summer and autumn 2014. During autumn, we find a strong reduction in the occurrence of liquid clouds and an increase for both mixed-phase and ice clouds at low levels compared to summer. About 80 % of all liquid clouds observed during the research cruise show a liquid water path below the infrared black body limit of approximately 50 g m -2 . The majority of mixed-phase and ice clouds had an ice water path below 20 g m -2 . Cloud properties are analysed with respect to cloud-top temperature and boundary layer structure. Changes in these parameters have little effect on the geometric thickness of liquid clouds while mixed-phase clouds during warm-air advection events are generally thinner than when such events were absent. Cloud-top temperatures are very similar for all mixed-phase clouds. However, more cases of lower cloud-top temperature were observed in the absence of warm-air advection. Profiles of liquid and ice water content are normalized with respect to cloud base and height. For liquid water clouds, the liquid water content profile reveals a strong increase with height with a maximum within the upper quarter of the clouds followed by a sharp decrease towards cloud top. Liquid water content is lowest for clouds observed below an inversion during warm-air advection events. Most mixed-phase clouds show a liquid water content profile with a very similar shape to that of liquid clouds but with lower maximum values during events with warm air above the planetary boundary layer. The normalized ice water content profiles in mixed-phase clouds look different from those of liquid water content. They show a wider range in maximum values with the lowest ice water content for clouds below an inversion and the highest values for clouds above or extending through an inversion. The ice water content profile generally peaks at a height below the peak in the liquid water content profile – usually in the centre of the cloud, sometimes closer to cloud base, likely due to particle sublimation as the crystals fall through the cloud.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2021

Development and Analysis of a Thick Cloud Layers Database for Lightning Launch Commit Criteria Improvement

Lightning can pose a potential threat to space launch vehicles. In response to this, rules were created called the Lightning Launch Commit Criteria (LLCC) that help weather personnel evaluate the potential for natural and rocket-triggered lightning. One of the ten LLCC with the least research is called the Thick Cloud Layers rule. To further understand electrification of thick cloud layers and potentially improve the Thick Cloud Layers rule, a database of thick cloud layers that occurred over the Eastern Range was created. This database is then used to create an algorithm for identifying and differentiating thick cloud layers from other cloud types based on radar characteristics, temperature levels in reference to cloud height, and the surface electric field. By analyzing and identifying thick cloud events, this project could help narrow down when thick clouds are occurring and potentially minimize unnecessary launch delays. Events that caused LLCC violations involving the Thick Cloud Layers rule were analyzed by hand using Level-2 NEXRAD radar data from the National Weather Service WSR-88D radar in Melbourne with the program GR2Analyst. Cases that were found to be isolated and not involved with convection were recorded (date, start/end time, location) in a database. Radar data associated with these cases was collected and gridded using Python radar packages. Once gridded, I calculated and recorded for each radar scan the following radar reflectivity driven parameters within an 11x11 km bin centered on each 1 square km grid point: the mean reflectivity colder than 0 degrees Celsius, Maximum Radar Reflectivity (MRR) colder than 0 degrees Celsius, Volume Averaged Height Integrated Radar Reflectivity (VAHIRR), Hydrometeor Identification (HID), the difference between the maximum and mean reflectivity, the cloud depth colder than 0 degrees Celsius, the overall cloud depth, the cloud top, and the cloud bottom. Soundings for each event were used to determine cloud temperature levels, and where the cloud is in relation to the freezing level. Electric field mill data collected over the Eastern Range was used to determine surface electric fields below each cloud. All parameters were analyzed in depth for several thick cloud cases to gain an understanding of typical thick cloud characteristics. Cases of thick clouds and other isolated cloud types were also recorded for training purposes to see if enough differences exist between cloud types to differentiate them with an algorithm. Each case along with its corresponding characteristics was recorded in a database, and this database was used to compare differing cloud types, as well as train the algorithm to detect thick clouds.

Lightning↗
NASA NTRS2022

An Evaluation of the Liquid Cloud Droplet Effective Radius Derived from MODIS, Airborne Remote Sensing, and in Situ Measurements from CAMP2Ex

The cloud drop effective radius (Re) of the drop size distribution derived from passive satellite sensors is a key variable used in climate research. Validation of these satellite products has often taken place under stratiform cloud conditions that favor the assumption of cloud horizontal homogeneity used by the retrieval techniques. However, many studies have noted concerns with respect to significant biases in retrieved Re arising from cloud heterogeneity, for example, in cumulus cloud fields. Here, we examine data collected during the 2019 “Cloud, Aerosol and Monsoon Processes Philippines Experiment” (CAMP2Ex), which, in part, targeted the objective of providing the first detailed evaluation of Re retrieved across multiple platforms and techniques in a cumulus and congestus cloud region. Our evaluation consists of cross-comparisons of Re between the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard the Terra satellite, the Research Scanning Polarimeter (RSP) onboard the NASA P-3 aircraft, and in situ measurements from both the NASA P-3 and Learjet aircraft that are all taken in close spatiotemporal proximity to the same cloud fields. A particular advantage of our approach lies in the capability of the RSP to retrieve Re using a bi-spectral MODIS approach and a polarimetric approach, which allows for the evaluation of bi-spectral and polarimetric Re retrievals from an airborne perspective using the same samples. Averaged over all P-3 flight segments examined here for warm clouds, the RSP polarimetric method, the in situ method, and the bias-adjusted MODIS method of Fu et al. (2019) show a comparable median (mean ± standard deviation) for the Re samples of 9.6 (10.2 ± 4.0) µm, 11.0 (13.6 ± 11.3) µm, and 10.4 (10.8 ± 3.8) µm, respectively. These values are far lower than the values of 15.1 (16.2 ± 5.5) µm and 17.2 (17.7 ± 5.7) µm from the bi-spectral retrievals of RSP and MODIS, respectively. Similar results are observed when Re is segregated by cloud-top height and in detailed case studies. The clouds sampled during CAMP2Ex consist of mostly small (mean transect length ∼ 1.4 km) and low clouds (mean cloud-top height ∼ 1 km), which had more numerous small clouds than the trade wind cumuli sampled in past field campaigns such as Rain in Shallow Cumulus over the Ocean (RICO) and the Indian Ocean Experiment (INDOEX). The overestimates of Re from the RSP bi-spectral technique compared with the polarimetric technique increased as cloud size and cloud optical depth decreased. Drizzle, cloud-top bumpiness, and solar zenith angle, however, are not closely correlated with the overestimate of bi-spectral Re. For shallow clouds that dominated the liquid cloud cover for the CAMP2Ex region and period, we show that 3-D radiative transfer and cloud heterogeneity, particularly for the optically thin and small clouds, appear to be the leading cause of the large positive biases in bi-spectral retrievals. Because this bias varies with the underlying structure of the cloud field, caution continues to be warranted in studies that use bi-spectral Re retrievals in cumulus cloud fields.

Cloud microphysics↗
DOE OSTI2024

Use of physics to improve solar forecast: Part III, impacts of different cloud types

Cloud-type impacts present a great challenge to solar forecasting due to diverse and complex cloud-radiation interactions. This third part of our paper sequence seeks to address this challenge by quantifying the forecast accuracies under eight cloud types: cumulus (Cu), stratified clouds (St), altocumulus (Ac), altostratus (As), cirrostratus/anvil (Cr), cirrus (Ci), congestus (Co), deep convective clouds (Dc) across four physics-informed persistence models reported in Part I. To generalize the cloud impacts, the eight cloud types are further grouped into three cloud categories based on their common features: weak convective clouds, stratiform clouds, and strong convective clouds. Here, the decade-long (2001 ~ 2014) collocated measurements of irradiances and cloud types at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Program South Great Plain (SGP) Central Facility site are used for model evaluation. Results reveal a clear performance hierarchy for global horizontal irradiance (GHI) and direct normal irradiance (DNI): best for weak convective clouds and cirrus, intermediate for stratiform clouds, and worst for strong convective clouds. Performance for diffuse horizontal irradiance (DHI) is less influenced by cloud types. Cloud albedo dominates all three irradiances for Dc, while both cloud albedo and cloud fraction are influential for other cloud types. A 12 %~33 % improvement in accuracy at 6-hour lead time compared to the benchmark smart model confirms the effectiveness of incorporating physics into the models for various cloud types; further improvements are expected by directly integrating cloud type information into forecasting models by modifying the physical formulation of cloud-radiation interaction, and/or using more advanced machine learning models.

14 SOLAR ENERGY↗
DOE OSTI2023

Vertical Structure and Ice Production Processes of Shallow Convective Postfrontal Clouds over the Southern Ocean in MARCUS. Part I: Observational Study

A study of the vertical structure of postfrontal shallow clouds in the marine boundary layer over the Southern Ocean is presented here. The central question of this two-part study regards cloud phase (liquid/ice) of precipitation, and the associated growth mechanisms. In this first part, data from the Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS) field campaign are analyzed, starting with a 75-h case with continuous sea surface-based thermal instability, modest surface heat fluxes, an open-cellular mesoscale organization, and very few ice nucleating particles (INPs). The clouds are mostly precipitating and shallow (tops mostly around 2 km above sea level), with weak up- and downdrafts, and with cloud-top temperatures generally around –18° to –10°C. Further, the case study is extended to three other periods of postfrontal shallow clouds in MARCUS. While abundant supercooled liquid water is commonly present, an experimental cloud-phase algorithm classifies nearly two-thirds of clouds in the 0° to –5°C layer as containing ice (cloud ice, snow, or mixed phase), implying that much of the precipitation grows through cold-cloud processes. The best predictors of ice presence are cloud-top temperature, cloud depth, and INP concentration. Measures of convective activity and turbulence are found to be poor indicators of ice presence in the studied environment. The water-phase distribution in this cloud regime is explored through numerical simulations in Part II. Significance Statement: Climate models generally predict a lower albedo than observed over the Southern Ocean, and this is largely attributed to a lack of cloudiness, especially in the postfrontal cold sector of midlatitude cyclones. This in turn may be due to an excess of ice in these simulated clouds, resulting in rapid precipitation fallout and an overly brief cloud lifespan. The objective of this study is to examine whether shallow postfrontal clouds over the Southern Ocean are dominated by supercooled drops, or by snow and ice, using data collected by a U.S. Department of Energy Atmospheric Radiation Measurement Mobile Facility deployed aboard an Australian Antarctic supply vessel. We find that these clouds contain much supercooled liquid, even though cloud-top temperatures generally are around –18° to –8°C, and that about two-thirds of the clouds just above the freezing level contain ice. Much of the precipitation appears to grow through cold-cloud processes above the freezing level, rather than drizzle/rain. Updrafts and/or turbulence in convection or in cloud-top generating cells do not initiate much ice, compared to observations elsewhere in a similar temperature range. This may be attributable to the extremely low concentration of ice nucleating particles in this environment. Ultimately, the deepest clouds with the coldest cloud tops are most likely to be ice dominated.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1996

Study of the Radiative Properties of Inhomogeneous Stratocumulus Clouds

Clouds play an important role in the radiation budget of the atmosphere. A good understanding of how clouds interact with solar radiation is necessary when considering their effects in both general circulation models and climate models. This study examined the radiative properties of clouds in both an inhomogeneous cloud system, and a simplified cloud system through the use of a Monte Carlo model. The purpose was to become more familiar with the radiative properties of clouds, especially absorption, and to investigate the excess absorption of solar radiation from observations over that calculated from theory. The first cloud system indicated that the absorptance actually decreased as the cloud's inhomogeneity increased, and that cloud forcing does not indicate any changes. The simplified cloud system looked at two different cases of absorption of solar radiation in the cloud. The absorptances calculated from the Monte Carlo is compared to a correction method for calculating absorptances and found that the method can over or underestimate absorptances at cloud edges. Also the cloud edge effects due to solar radiation points to a possibility of overestimating the retrieved optical depth at the edge, and indicates a possible way to correct for it. The effective cloud fraction (Ne) for a long time has been calculated from a cloud's reflectance. From the reflectance it has been observed that the N, for most cloud geometries is greater than the actual cloud fraction (Nc) making a cloud appear wider than it is optically. Recent studies we have performed used a Monte Carlo model to calculate the N, of a cloud using not only the reflectance but also the absorptance. The derived Ne's from the absorptance in some of the Monte Carlo runs did not give the same results as derived from the reflectance. This study also examined the inhomogeneity of clouds to find a relationship between larger and smaller scales, or wavelengths, of the cloud. Both Fourier transforms and wavelet transforms were used to analyze the liquid water content of marine stratocumulus clouds taken during the ASTEX project. From the analysis it was found that the energy in the cloud is not uniformly distributed but is greater at the larger scales than at the smaller scales. This was determined by examining the slope of the power spectrum, and by comparing the variability at two scales from a wavelet analysis.

Batey, Michael↗
NASA NTRS1993

Comparison of ISCCP and other cloud amounts

A new 8-year global cloud climatology has been produced by the International Satellite Cloud Climatology Project (ISCCP) that provides information every 3 h at 280-km spatial resolution covering the period from July 1983 through June 1991. If cloud detection errors and differences in area sampling are neglected, individual ISCCP cloud amounts agree with individual surface observations to within 15% rms with biases of only a few percent. When measurements of small-scale, broken clouds are isolated in the comparison, the rms differences between satellite and surface cloud amounts are about 25%, similar to the rms difference between ISCCP and Landsat determinations of cloud amount. For broken clouds, the average ISCCP cloud amounts are about 5% smaller than estimated by surface observers (difference between earth cover and sky cover), but about 5% larger than estimated from very high spatial resolution satellite observations (overestimate due to low spatial resolution offset by underestimate due to finite radiance thresholds). Detection errors caused by errors in the ISCCP clear-sky radiances or incorrect radiance threshold magnitudes, are the dominant source of error in monthly average cloud amounts. The ISCCP cloud amounts appear to be too low over land by about 10%, somewhat less in summer and somewhat more in winter, and about right (maybe slightly low) over oceans. In polar regions, ISCCP cloud amounts are probably too low by about 15%-25% in summer and 5%-10% in winter. Comparison of the ISCCP climatology to three other cloud climatologies shows excellent agreement in the geographic distribution and seasonal variation of cloud amounts; there is little agreement about day/night contrasts in cloud amount. Notable results from ISCCP are that the gobal annual mean cloud amount is about 63%, being about 23% higher over oceans than over land, that it varies by less than 1% rms from month to month, and that it has varied by about 4% on a time scale approximately equal to 2-4 years. The magnitude of interannual variations of local (280-km scale) monthly mean cloud amounts is about 7%-9%. Longitudinal contrasts in cloud amount are just as large as latitudinal contrasts. The largest seasonal variation of cloud amount occurs in the tropics, being larger in summer than in winter; the seasonal variation in the middle latitudes has the opposite phase. Polar regions may have little seasonable variability in cloud amount. The ISCCP results show slightly more nightime than daytime cloud amount over oceans and more daytime than nightime cloud amount over land.

Rossow, William B.↗
NASA NTRS1997

Cloud Radiation Forcings and Feedbacks: General Circulation Model Tests and Observational Validation

Using an atmospheric general circulation model (the National Center for Atmospheric Research Community Climate Model: CCM2), the effects on climate sensitivity of several different cloud radiation parameterizations have been investigated. In addition to the original cloud radiation scheme of CCM2, four parameterizations incorporating prognostic cloud water were tested: one version with prescribed cloud radiative properties and three other versions with interactive cloud radiative properties. The authors' numerical experiments employ perpetual July integrations driven by globally constant sea surface temperature forcings of two degrees, both positive and negative. A diagnostic radiation calculation has been applied to investigate the partial contributions of high, middle, and low cloud to the total cloud radiative forcing, as well as the contributions of water vapor, temperature, and cloud to the net climate feedback. The high cloud net radiative forcing is positive, and the middle and low cloud net radiative forcings are negative. The total net cloud forcing is negative in all of the model versions. The effect of interactive cloud radiative properties on global climate sensitivity is significant. The net cloud radiative feedbacks consist of quite different shortwave and longwave components between the schemes with interactive cloud radiative properties and the schemes with specified properties. The increase in cloud water content in the warmer climate leads to optically thicker middle- and low-level clouds and in turn to negative shortwave feedbacks for the interactive radiative schemes, while the decrease in cloud amount simply produces a positive shortwave feedback for the schemes with a specified cloud water path. For the longwave feedbacks, the decrease in high effective cloudiness for the schemes without interactive radiative properties leads to a negative feedback, while for the other cases, the longwave feedback is positive. These cloud radiation parameterizations are empirically validated by using a single-column diagnostic model. together with measurements from the Atmospheric Radiation Measurement program and from the Tropical Ocean Global Atmosphere Combined Ocean-Atmosphere Response Experiment. The inclusion of prognostic cloud water produces a notable improvement in the realism of the parameterizations, as judged by these observations. Furthermore, the observational evidence suggests that deriving cloud radiative properties from cloud water content and microphysical characteristics is a promising route to further improvement.

Lee,Wan-Ho↗
NASA NTRS2003

Extraction of Profile Information from Cloud Contaminated Radiances

Clouds act to reduce the signal level and may produce noise dependence on the complexity of the cloud properties and the manner in which they are treated in the profile retrieval process. There are essentially three ways to extract profile information from cloud contaminated radiances: (1) cloud-clearing using spatially adjacent cloud contaminated radiance measurements, (2) retrieval based upon the assumption of opaque cloud conditions, and (3) retrieval or radiance assimilation using a physically correct cloud radiative transfer model which accounts for the absorption and scattering of the radiance observed. Cloud clearing extracts the radiance arising from the clear air portion of partly clouded fields of view permitting soundings to the surface or the assimilation of radiances as in the clear field of view case. However, the accuracy of the clear air radiance signal depends upon the cloud height and optical property uniformity across the two fields of view used in the cloud clearing process. The assumption of opaque clouds within the field of view permits relatively accurate profiles to be retrieved down to near cloud top levels, the accuracy near the cloud top level being dependent upon the actual microphysical properties of the cloud. The use of a physically correct cloud radiative transfer model enables accurate retrievals down to cloud top levels and below semi-transparent cloud layers (e.g., cirrus). It should also be possible to assimilate cloudy radiances directly into the model given a physically correct cloud radiative transfer model using geometric and microphysical cloud parameters retrieved from the radiance spectra as initial cloud variables in the radiance assimilation process. This presentation reviews the above three ways to extract profile information from cloud contaminated radiances. NPOESS Airborne Sounder Testbed-Interferometer radiance spectra and Aqua satellite AIRS radiance spectra are used to illustrate how cloudy radiances can be used in the profile retrieval process.

Smith, W. L.↗
DOE OSTI2024

Droplet Growth or Evaporation Does Not Buffer the Variability in Supersaturation in Clean Clouds

Abstract Water vapor supersaturation in clouds is a random variable that drives activation and growth of cloud droplets. The Pi Convection–Cloud Chamber generates a turbulent cloud with a microphysical steady state that can be varied from clean to polluted by adjusting the aerosol injection rate. The supersaturation distribution and its moments, e.g., mean and variance, are investigated for varying cloud microphysical conditions. High-speed and collocated Eulerian measurements of temperature and water vapor concentration are combined to obtain the temporally resolved supersaturation distribution. This allows quantification of the contributions of variances and covariances between water vapor and temperature. Results are consistent with expectations for a convection chamber, with strong correlation between water vapor and temperature; departures from ideal behavior can be explained as resulting from dry regions on the warm boundary, analogous to entrainment. The saturation ratio distribution is measured under conditions that show monotonic increase of liquid water content and decrease of mean droplet diameter with increasing aerosol injection rate. The change in liquid water content is proportional to the change in water vapor concentration between no-cloud and cloudy conditions. Variability in the supersaturation remains even after cloud droplets are formed, and no significant buffering is observed. Results are interpreted in terms of a cloud microphysical Damköhler number (Da), under conditions corresponding to , i.e., the slow-microphysics regime. This implies that clouds with very clean regions, such that is satisfied, will experience supersaturation fluctuations without them being buffered by cloud droplet growth. Significance Statement The saturation ratio (humidity) in clouds controls the growth rate and formation of cloud droplets. When air in a turbulent cloud mixes, the humidity varies in space and time throughout the cloud. This is important because it means cloud droplets experience different growth histories, thereby resulting in broader size distributions. It is often assumed that growth and evaporation of cloud droplets buffers out some of the humidity variations. Measuring these variations has been difficult, especially in the field. The purpose of this study is to measure the saturation ratio distribution in clouds with a range of conditions. We measure the in-cloud saturation ratio using a convection cloud chamber with clean to polluted cloud properties. We found in clouds with low concentrations of droplets that the variations in the saturation ratio are not suppressed.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Progress Towards a Common CERES Cloud Mask Algorithm for MODIS and VIIRS: Evaluation using CALIOP Data

For over two decades The Clouds and the Earth’s Radiant Energy System (CERES) project has endeavored to produce a long-term global climate data record for detecting changes in the Earth’s radiation budget and to improve understanding of how clouds contribute to those changes. CERES incorporates cloud information derived from passive narrowband satellite imaging radiometers, and over the course of the project different instruments have contributed to this effort, namely the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Visible Infrared Imaging Radiometer Suite (VIIRS).Cloud properties have been derived from MODIS on the Aqua satellite for CERES since 2002,and VIIRS on the NOAA-20 satellite launched in 2017 will continue the cloud record once Aqua-MODIS reaches the end of its operational lifetime. However, MODIS and VIIRS have different spectral capabilities and characteristics which complicates our ability to seamlessly transition the record from MODIS to VIIRS. This study evaluates some of the recent algorithm modifications incorporated by the CERES Cloud Working Group towards developing a unified cloud mask algorithm for MODIS and VIIRS that utilizes a set of spectral bands common to both instruments. Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) data products are used to evaluate MODIS and VIIRS regional cloud fraction estimates and identify areas where improvements can be made. The cloud mask algorithm relies on computed estimates of cloud-free top-of-atmosphere radiances to differentiate cloudy and cloud-free imager pixels. The unified cloud mask algorithm currently under development uses a reduced number of spectral bands common to both MODIS and VIIRS and so relies on the accuracy of these simulated cloud-free radiances more heavily than predecessor algorithms, i.e., the CERES Edition 4 cloud mask, which use as much spectral information as available on each imager with less consideration for cross-platform consistency. Our validation strategy using CALIOP data is also described. The CALIOP observations are critical for assessing cloud detection accuracies and for independently confirming cloud-free conditions which enables a more robust evaluation of the simulated cloud-free radiances for biases due to factors such as view angle and the spectral dependence of water vapor absorption. These effects are known to differ for the two satellite instruments. Comparisons of MODIS and VIIRS cloud fractions are presented in context with estimates from CALIOP and from the CERES Edition 4 cloud mask algorithm to gauge current progress in developing accurate and consistent MODIS and VIIRS cloud properties for CERES.

CERES↗
NASA NTRS2001

Cloud Spatial Structure and 3D Radiative Transfer

Cloud radiative properties are sensitive to drop size and other parameters of cloud micro-structure, but also to cloud shape, spacing, and other parameters of cloud macro-structure, including internal fractal structure. New information on cloud structure is being derived from a variety of cloud radars and lidars. Ongoing field programs such as DoE/ARM are improving the measurement and modelling of physical and radiative properties of clouds. A parallel effort is underway to improve cloud remote sensing, especially from the new suite of EOS (Earth Observing System) instruments which are beginning to provide higher spectral, spatial resolution, and/or angular resolution. Key parameters for improving pixel-scale retrievals are cloud thickness and photon mean-free-path, which together determine the scale of "radiative smoothing" of cloud fluxes and radiances. This scale has been observed as a change in the spatial spectrum of Landsat cloud radiances, and was also recently found with the Goddard micropulse lidar, by searching for returns from directions nonparallel to the incident beam. "Offbeam" Lidar returns are now being used to estimate the cloud "radiative Green's function", (G). G depends on cloud thickness and may be used to retrieve that important quantity. G is also being applied to improving simple estimates of cloud radiative properties that are based on the "Independent Pixel Approximation" or IPA. This and other measurements of 3D transfer in clouds, coupled with Monte Carlo and other 3D transfer methods, are beginning to provide a better understanding of the dependence of radiation on cloud inhomogeneity, and to suggest new retrieval and parameterization algorithms which take account of cloud inhomogeneity. An international "Intercomparison of 3D Radiation Codes" or I3RC, program is underway to coordinate and evaluate the variety of 3D radiative transfer methods now available, and to make them more widely available. Information is on the Web at: http://climate.gsfc.nasa.gov/I3RC. Input consists of selected cloud fields derived from data sources such as radar, microwave and satellite, and from models involved in the GEWEX Cloud Systems Studies. Output is selected radiative quantities that characterize the large-scale properties of the fields of radiative fluxes and heating. Several example cloud fields will be used to illustrate the effects of cloud inhomogeneity and 3D radiation.

Cahalan, Robert F.↗
NASA NTRS2001

Cloud Spatial Structure and 3D Radiative Transfer

Cloud radiative properties are sensitive to drop size and other parameters of cloud micro-structure, but also to cloud shape, spacing, and other parameters of cloud macro-structure, including internal fractal structure. New information on cloud structure is being derived from a variety of cloud radars and lidars. Ongoing field programs such as DoE/ARM (atmospheric radiation measurement) are improving the measurement and modelling of physical and radiative properties of clouds. A parallel effort is underway to improve cloud remote sensing, especially from the new suite of EOS (Earth observing system) instruments which are beginning to provide higher spectral, spatial resolution, and/or angular resolution. Key parameters for improving pixel-scale retrievals are cloud thickness and photon mean-free-path, which together determine the scale of 'radiative smoothing' of cloud fluxes and radiances. This scale has been observed as a change in the spatial spectrum of Landsat cloud radiances, and was also recently found with the Goddard micropulse lidar, by searching for returns from directions nonparallel to the incident beam. 'Offbeam' Lidar returns are now being used to estimate the cloud 'radiative Green's function' (G). G depends on cloud thickness and may be used to retrieve that important quantity. G is also being applied to improving simple estimates of cloud radiative properties that are based on the 'Independent Pixel Approximation' or IPA. This and other measurements of 3D (three dimensional) transfer in clouds, coupled with Monte Carlo and other 3D transfer methods, are beginning to provide a better understanding of the dependence of radiation on cloud inhomogeneity, and to suggest new retrieval and parameterization algorithms which take account of cloud inhomogeneity. An international 'Intercomparison of 3D Radiation Codes' (I3RC) program is underway to coordinate and evaluate the variety of 3D radiative transfer methods now available, and to make them more widely available. Information is on the Web at: http://climate.gsfc.nasa.gov/I3RC. Input consists of selected cloud fields derived from data sources such as radar, microwave and satellite, and from models involved in the GEWEX Cloud Systems Studies. Output is selected radiative quantities that characterize the large-scale properties of the fields of radiative fluxes and heating. Several example cloud fields will be used to illustrate the effects of cloud inhomogeneity and 3D radiation.

Cahalan, Robert F.↗
DOE OSTI2018

Final Technical Report: Moving ASR Cloud Microphysical Retrievals Beyond the Vertical Column

Clouds of all types play important roles in atmospheric heating, surface heating and emission of radiation, hence energy, to space. Clouds not only affect atmospheric heating via their impacts on solar and terrestrial radiation, they also release kinetic energy to the atmosphere when they form and they extract kinetic energy from the atmosphere when they evaporate. To understand the impacts of clouds on weather and climate, one must be able to make accurate observations of the amount of water associated with them and the impact of this water on atmospheric and surface heating rates. One important cloud type is liquid water clouds. Liquid clouds are often found in the boundary layers of Earth at altitudes from just above the surface to approximately 2000 m above it, at a variety of temperatures, including temperatures below the freezing point of liquid water (0 °C). As a result, they are important constituents over the world’s oceans as well as over cold, ice-covered surfaces such as in the Arctic. Observationally estimating the total amount of liquid contained in a column through a liquid water cloud can now be accomplished to acceptable accuracies (except for the thinnest, lowest liquid containing clouds) using instruments called passive microwave radiometers. However, observationally determining the spatial distribution of liquid within these columns has proven to be difficult. The focus of this project was on the application of two radars operating at two different frequencies to retrieve the distribution of liquid water within columns passing through liquid water clouds. Motivation in this project for using two different radars operating at different frequencies is that as overlapping (in space) beams from the two radars pass through the same column of liquid water cloud absorption of power from one beam (the 94-GHz beam) is greater than absorption of power from the other beam (the 35-GHz beam). Therefore, the difference in returned powers between the two radar beams with distance from the radars is proportional to the amount of liquid water that the two beams have passed through. Therefore, one can use the differences in power between the two beams with distance through a liquid water cloud to determine the distribution of liquid water throughout the cloud. The two radars used in this study are the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Program Ka-band Scanning ARM Cloud Radar (Ka-SACR) and the W-band Scanning ARM Cloud Radar (W-SACR). When this projected started in 2013, the Ka- and W-band SACRs were new technology, state-of-the-art sensors. To put together a sufficiently diverse and big set of test cases for the study, data from the SACRs deployed to NSA, SGP, TCAP and MAGIC were used, leading to a test set composed of 65 hours of suitable data spread over approximately 17 case study days. Using the Ka- and W-band SACR data from the case study periods, vertical distributions of liquid water content through liquid water clouds were retrieved. Because there are no other data sets with which to compare the retrievals, distributions of liquid water through a column were summed and compared to the total amounts of liquid water obtained by retrievals applied to passive microwave radiometer observations. The total amounts of liquid water (in units of millimeters, or the thickness in millimeters of the total liquid water in a vertical column if allowed to pool at the bottom of the column) between the two retrievals agreed to within 0.060 mm with a standard deviation of 0.31 mm, or to within 0.016 mm with a standard deviation of 0.12 mm once outliers were removed. The standard deviation of 0.12 mm was fairly independent of the total amount of liquid water in the clouds, indicating that retrieval errors were larger for clouds with smaller amounts of liquid in them. Errors in the retrieved total amounts of liquid were also found to be sensitive to the a priori information that was fed into the retrieval approach. Overall, standard deviations of 0.12 mm are sufficient for some cloud studies but for radiation studies standard deviations on the order of 0.02 mm need to be achieved for clouds with the lowest amounts of liquid water. Many modifications to the retrieval approach were tested subsequently in an attempt to reduce the standard deviations relative to the radiometer retrievals below 0.12 mm but none of them worked reliably. We decided to wait until the DOE ARM Program deployed its second generation SACR2s to its NSA and ENA sites for further retrieval evaluation. The SACR2s were engineered to better synchronize data between the Ka- and W-band radars, reducing potential sources of noise for radar retrieval of liquid water distributions within clouds. The SACR2s have improved in reliability recently and the system deployed to ENA is best positioned to provide the data to advance research on this path. This will be an ongoing research activity beyond the project because of the promise in SACR2 data from the DOE ARM ENA Facility.

58 GEOSCIENCES↗
DOE OSTI2023

What Are the Similarities and Differences in Marine Boundary Layer Cloud and Drizzle Microphysical Properties During the ACE–ENA and MARCUS Field Campaigns?

This study compares macrophysical and microphysical properties of single-layered, liquid-dominant MBL clouds from the Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS) (above 60°S) and the ARM East North Atlantic (ENA) site during the Aerosol and Cloud Experiments in Eastern North Atlantic (ACE-ENA) field campaign. A total of 1,136 (16.5% of clouds) and 6,034 5-min cloud samples are selected from MARCUS and ARM ENA in this study. MARCUS clouds have higher cloud-top heights, thicker cloud layers, larger liquid water path, and colder cloud temperatures than ENA. Thinner, warmer MBL clouds at ENA can contain higher layer-mean liquid water content due to higher cloud and ocean surface temperatures along with greater precipitable water vapor (PWV). MARCUS has a higher drizzle frequency rate (71.8%) than ENA (45.1%). Retrieved cloud and drizzle microphysical properties from each field campaign show key differences. MARCUS clouds feature smaller cloud droplets, whereas ENA clouds have larger cloud droplets, especially at the upper region of the cloud. From cloud top to cloud base, drizzle drop sizes increase while number concentrations decrease. Drizzle drop radius and number concentration decrease from cloud base to drizzle base due to net evaporation, and MARCUS' lower specific humidity leads to a higher drizzle base than ENA. In conclusion, the broader surface pressure and lower tropospheric stability (LTS) distributions during MARCUS have demonstrated that there are different synoptic patterns for selected cases during MARCUS with less PWV, while ENA is dominated by high pressure systems with nearly doubled PWV.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A Climatology of Marine Boundary Layer Cloud and Drizzle Properties derived from Ground-based Observations over the Azores

In this study, more than four years of ground-based observations and retrievals were collected and analyzed to investigate the seasonal and diurnal variations of single-layered MBL (with three subsets: non-drizzling, virga and rain) cloud and drizzle properties, as well as their vertical and horizontal variations. The annual mean drizzle frequency was ~55%, with ~70% in winter and ~45% in summer. The cloud-top (-base) height for rain clouds was the highest (lowest), resulted in the deepest cloud layer (0.8 km), which is four (two) times of non-drizzling (virga) clouds. The retrieved cloud-droplet effective radii (rc) were the largest (smallest) for rain (non-drizzling) clouds, and the nighttime values were greater than the daytime values. Drizzle number concentration (Nd) and liquid water content (LWCd) were three and one order(s) lower than their cloud counterparts. The rc and LWCc increased from the cloud base to ???? = ~0.75 by condensational growth, while drizzle median radii (rd) increased from the cloud top downwards the cloud base by collision-coalescence. The adiabaticity values monotonically increased from the cloud top to the cloud base with maxima of ~0.7 (0.3) for non-drizzling (rain) clouds. The drizzling process decreases the adiabaticity by 0.25 to 0.4, and the cloud-top entrainment mixing impacts as deep as upper 40% of the cloud layers. Cloud and drizzle homogeneities decreased with increased horizontal sampling lengths. Cloud homogeneity increases with increasing cloud fraction. These results can serve as baselines for studying MBL cloud-to-rain conversion and growth processes over the Azores.

Wu, Peng↗
NASA NTRS1993

The three-dimensional structure of cumulus clouds over the ocean. 1: Structural analysis

Thermal channel (channel 6, 10.4-12.5 micrometers) images of five Landsat thematic mapper cumulus scenes over the ocean are examined. These images are thresholded using the standard International Satellite Cloud Climatology Project (ISCCP) thermal threshold algorithm. The individual clouds in the cloud fields are segmented to obtain their structural statistics which include size distribution, orientation angle, horizontal aspect ratio, and perimeter-to-area (PtA) relationship. The cloud size distributions exhibit a double power law with the smaller clouds having a smaller absolute exponent. The cloud orientation angles, horizontal aspect ratios, and PtA exponents are found in good agreement with earlier studies. A technique also is developed to recognize individual cells within a cloud so that statistics of cloud cellular structure can be obtained. Cell structural statistics are computed for each cloud. Unicellular clouds are generally smaller (less than or equal to 1 km) and have smaller PtA exponents, while multicellular clouds are larger (greater than or equal to 1 km) and have larger PtA exponents. Cell structural statistics are similar to those of the smaller clouds. When each cell is approximated as a quadric surface using a linear least squares fit, most cells have the shape of a hyperboloid of one sheet, but about 15% of the cells are best modeled by a hyperboloid of two sheets. Less than 1% of the clouds are ellipsoidal. The number of cells in a cloud increases slightly faster than linearly with increasing cloud size. The mean nearest neighbor distance between cells in a cloud, however, appears to increase linearly with increasing cloud size and to reach a maximum when the cloud effective diameter is about 10 km; then it decreases with increasing cloud size. Sensitivity studies of threshold and lapse rate show that neither has a significant impact upon the results. A goodness-of-fit ratio is used to provide a quantitative measure of the individual cloud results. Significantly improved results are obtained after applying a smoothing operator, suggesting the eliminating subresolution scale variations with higher spatial resolution may yield even better shape analyses.

Kuo, Kwo-Sen↗
NASA NTRS1996

Response of Tropical Clouds to the Interannual Variation of Sea Surface Temperature

Connections between the large-scale interannual variations of clouds, deep convection, atmospheric winds. vertical thermodynamic structure, and SSTs over global tropical oceans are examined over the period July 1983 - December 1990. The SST warming associated with El Nino had a significant impact on the global tropical cloud field, although the warming itself was confined to the equatorial central and eastern Pacific. Extensive variations of the total cloud field occurred in the northeastern Indian, western and central Pacific, and western Atlantic Oceans. The changes of high and middle clouds dominated the total cloud variation in these regions. Total cloud variation was relatively weak in the eastern Pacific and the Atlantic because of the cancellation between the changes of high and low clouds. The variation of low clouds dominated the total cloud change in those areas. The destabilization of the lapse rate between 900 and 750 mb was more important for enhancing convective instability than was the change of local SSTs in the equatorial central Pacific during the 1997 El Nino. This destabilization is associated with anomalous rising motion in that region. As a result. convection and high and middle clouds increased in the equatorial central Pacific, In the subtropical Pacific, both the change of lapse rate between 900 and 750 mb associated A,ith anomalous subsidence and the decrease of boundary-layer buoyancy due to a decrease of temperature and moisture played an important role in enhancing convective stability. Consequently, convection, as well its high and middle clouds, decreased in these areas. The change ot'low clouds in the equatorial and southeastern Atlantic was correlated to both local SSTs and the SST changes in the equatorial eastern Pacific. In this area. the increase of low clouds was consistent with the sharper inversion during the 1987 El Nino, The strengthening of the inversion was not caused by a local SST change. although the local SST change appeared to he correlated to the change of low clouds. The coherence between clouds and SST tendency shows that SST tendency leads cloud variation in the equatorial Pacific. Thus, the change of clouds does not dominate the sign of SST tendency even though the cloud change was maximum during the 1987 El Nino. In some ideas of the Indian, subtropical Pacific, and North Atlantic Oceans, cloud change leads SST tendency. Cloud change might affect SST tendency in these regions.

Fu, Rong↗