Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Cubic Sc{sub 1-x}Al{sub x}N solid solution thin films deposited by reactive magnetron sputter epitaxy onto ScN(111)

Reactive magnetron sputter epitaxy was used to deposit thin solid films of Sc{sub 1-x}Al{sub x}N (0<=x<=1) onto MgO(111) substrates with ScN(111) seed layers. Stoichiometric films were deposited from elemental Sc and Al targets at substrate temperatures of 600 deg. C. The films were analyzed by Rutherford backscattering spectroscopy, elastic recoil detection analysis, x-ray diffraction, and transmission electron microscopy. Results show that rocksalt structure (c)-Sc{sub 1-x}Al{sub x}N solid solutions with AlN molar fractions up to approx60% can be synthesized. For higher AlN contents, the system phase separates into c- and wurtzite structure (w)-Sc{sub 1-x}Al{sub x}N domains. The w-domains are present in three different orientations relative to the seed layer, namely, Sc{sub 1-x}Al{sub x}N(0001)||ScN(111) with Sc{sub 1-x}Al{sub x}N[1210]||ScN[110], Sc{sub 1-x}Al{sub x}N(1011)||ScN(111) with Sc{sub 1-x}Al{sub x}N[1210]||ScN[110], and Sc{sub 1-x}Al{sub x}N(1011)||ScN(113). The results are compared to first-principles density functional theory calculations for the mixing enthalpies of c-, w-, and zinc blende Sc{sub 0.50}Al{sub 0.50}N solid solutions, yielding metastability with respect to phase separation for all temperatures below the melting points of AlN and ScN.

36 MATERIALS SCIENCE↗

Evaluation of threading dislocation densities in In- and N-face InN

The threading dislocation (TD) structure and density has been studied in In- and N-face InN films grown on GaN by plasma-assisted molecular beam epitaxy. The TD densities were determined by nondestructive x-ray diffraction rocking curve measurements in on-axis symmetric and off-axis skew symmetric geometries and calibrated by transmission electron microscopy measurements. TD densities were dominated by edge-type TDs with screw-component TDs accounting for less than 10% of the total TD density. A significant decrease in edge-type TD density was observed for In-face InN films grown at increasingly higher substrate temperatures. In-face InN films grown with excess In exhibited lower TD densities compared to films grown under N-rich conditions. The edge-type TD density of N-face InN films was independent of substrate temperature due to the higher allowable growth temperatures for N-face InN compared to In-face InN. TD densities in In-face InN also showed a strong dependence on film thickness. Films grown at a thickness of less than 1 {mu}m had higher TD densities compared with films grown thicker than 1 {mu}m. The lowest measured TD density for an In-face InN film was {approx}1.5x10{sup 10}/cm{sup 2} for 1 {mu}m thick films.

36 MATERIALS SCIENCE↗

Coupling effect of the electric and temperature fields on the growth of nanocrystalline copper films

The effect of an external static electric field on the grain growth in nanocrystalline Cu films was studied at different annealing temperatures. Transmission electron microscopy and x-ray diffraction indicate that the grain growth in Cu films is accelerated with various rates by an external electric field at different annealing temperatures. It is found that there is a coupling effect from the external electric and temperature fields on grain growth in Cu films during annealing. The growth rate is accelerated proportional to a factor f(E)centre dotmu{sup T/100} deg. C, which is determined from the theoretical derivation. The analysis indicates that the enhanced grain growth is achieved by the effect of the electric field on the vacancies migration and dislocation climb along grain boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pulsed laser deposition growth of heteroepitaxial YBa2Cu3O7/La0.67Ca0.33MnO3 superlattices on NdGaO3 and Sr0.7La0.3Al0.65Ta0.35O3 substrates

Heteroepitaxial superlattices of [YBa{sub 2}Cu{sub 3}O{sub 7}(n)/La{sub 0.67}Ca{sub 0.33}MnO{sub 3}(m)]{sub x} (YBCO/LCMO), where n and m are the number of YBCO and LCMO monolayers and x the number of bilayer repetitions, have been grown with pulsed laser deposition on NdGaO{sub 3} (110) and Sr{sub 0.7}La{sub 0.3}Al{sub 0.65}Ta{sub 0.35}O{sub 3} (001). These substrates are well lattice matched with YBCO and LCMO and, unlike the commonly used SrTiO{sub 3}, they do not give rise to complex and uncontrolled strain effects at low temperature. The growth dynamics and the structure have been studied in situ with reflection high-energy electron diffraction and ex situ with scanning transmission electron microscopy, x-ray diffraction, and neutron reflectometry. The individual layers are found to be flat and continuous over long lateral distances with sharp and coherent interfaces and with a well-defined thickness of the individual layer. The only visible defects are antiphase boundaries in the YBCO layers that originate from perovskite unit-cell height steps at the interfaces with the LCMO layers. We also find that the first YBCO monolayer at the interface with LCMO has an unusual growth dynamics and is lacking the CuO chain layer, while the subsequent YBCO layers have the regular Y-123 structure. Accordingly, the CuO{sub 2} bilayers at both the LCMO/YBCO and the YBCO/LCMO interfaces are lacking one of their neighboring CuO chain layers and, thus, half of their hole-doping reservoir. Nevertheless, from electric transport measurements on a superlattice with n = 2 we obtain evidence that the interfacial CuO{sub 2} bilayers remain conducting and even exhibit the onset of a superconducting transition at very low temperature. Finally, we show from dc magnetization and neutron reflectometry measurements that the LCMO layers are strongly ferromagnetic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and magnetic properties of self assembled Fe-doped Cu{sub 2}O nanorods

Cuprous oxide (Cu{sub 2}O) nanorods doped with iron impurities have been synthesized by the polyol method using sodium dodecyl sulfate as the surfactant. The X-ray diffraction measurement reveals the pure phase of simple cubic Cu{sub 2}O and the electron microscopy displays its one dimensional morphology. Ferromagnetism was observed at room temperature in the magnetic measurements of the doped samples while undoped sample exhibits only diamagnetism. Room temperature Moessbauer spectra for the samples exhibited only doublets but no sextet, which corresponds to the presence of paramagnetic iron sites. As magnetic moment contribution of the doped ions was insignificant for the observed magnetism, ferromagnetic property in the doped samples could have been originated from the defects as cation vacancies. Existence of the defects was supported by the room temperature photoluminescence spectra of the doped samples in reference to the undoped sample. - Ferromagnetism at room temperature was observed in the Fe doped Cu{sub 2}O nanorods. The origin seems to be the defects of cation vacancies created by the dopant ions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Template Synthesis Of Copper Nanowires Via Electrodeposition Technique And Their Characterization

Copper nanowires have been synthesized successfully using template assisted electrodeposition technique. Commercial polycarbonate membrane (Whatman, Japan) having pore diameter 100 nm, thickness 10 {mu}m and pore density 10{sup 7} pores/cm{sup 2} was used as template. Scanning electron microscopy and X-ray diffraction techniques were used to characterize the synthesized copper nanowires. XRD and SEM results reveal that polycrystalline copper nanowires were obtained with fcc lattice structure having diameter equal to the diameter of the template used.

36 MATERIALS SCIENCE↗

Molecular beam epitaxy of InAlN lattice-matched to GaN with homogeneous composition using ammonia as nitrogen source

InAlN lattice-matched to GaN was grown by molecular beam epitaxy (MBE) using ammonia as the nitrogen source. The alloy composition, growth conditions, and strain coherence of the InAlN were verified by high resolution x-ray diffraction {omega}-2{theta} scans and reciprocal space maps. Scanning transmission electron microscopy and energy-dispersive x-ray spectroscopy of the InAlN revealed the absence of lateral composition modulation that was observed in the films grown by plasma-assisted MBE. InAlN/AlN/GaN high electron mobility transistors with smooth surfaces were fabricated with electron mobilities exceeding 1600 cm{sup 2}/Vs and sheet resistances below 244 {Omega}/sq.

36 MATERIALS SCIENCE↗

Efficient E-Beam Lithography Exposure Strategies for Diffractive X-ray Optics

Exposure of structures with rotational symmetry by means of electron beam lithography is not trivial, because the e-beam writers are usually designed to deal with the data defined in Cartesian coordinates. Fabrication of circular nanostructures like Fresnel zone plates (FZPs) for x-ray microscopy applications requires exposures with resolution well below 1 nm. Therefore, special attention has to be paid to the efficient exposure data preparation, which will guarantee required precision and allow keeping the exposure time low. In this article, we describe in detail an optimized strategy that was applied for exposure of FZPs by the Vistec EBPG5000Plus e-beam lithography tool. Direct programming of exposure files allowed us to use fully the capabilities of this e-beam writer to expose efficiently and reproducibly FZPs with desired characteristics in both positive and negative tone resists.

43 PARTICLE ACCELERATORS↗

Microfluidic sorting of protein nanocrystals by size for X-ray free-electron laser diffraction

The advent and application of the X-ray free-electron laser (XFEL) has uncovered the structures of proteins that could not previously be solved using traditional crystallography. While this new technology is powerful, optimization of the process is still needed to improve data quality and analysis efficiency. One area is sample heterogeneity, where variations in crystal size (among other factors) lead to the requirement of large data sets (and thus 10–100 mg of protein) for determining accurate structure factors. To decrease sample dispersity, we developed a high-throughput microfluidic sorter operating on the principle of dielectrophoresis, whereby polydisperse particles can be transported into various fluid streams for size fractionation. Using this microsorter, we isolated several milliliters of photosystem I nanocrystal fractions ranging from 200 to 600 nm in size as characterized by dynamic light scattering, nanoparticle tracking, and electron microscopy. Sorted nanocrystals were delivered in a liquid jet via the gas dynamic virtual nozzle into the path of the XFEL at the Linac Coherent Light Source. We obtained diffraction to ∼4 Å resolution, indicating that the small crystals were not damaged by the sorting process. We also observed the shape transforms of photosystem I nanocrystals, demonstrating that our device can optimize data collection for the shape transform-based phasing method. Using simulations, we show that narrow crystal size distributions can significantly improve merged data quality in serial crystallography. From this proof-of-concept work, we expect that the automated size-sorting of protein crystals will become an important step for sample production by reducing the amount of protein needed for a high quality final structure and the development of novel phasing methods that exploit inter-Bragg reflection intensities or use variations in beam intensity for radiation damage-induced phasing. This method will also permit an analysis of the dependence of crystal quality on crystal size.

36 MATERIALS SCIENCE↗

Dopant activation in ion implanted silicon by microwave annealing

Microwaves are used as a processing alternative for the electrical activation of ion implanted dopants and the repair of ion implant damage within silicon. Rutherford backscattering spectra demonstrate that microwave heating reduces the damage resulting from ion implantation of boron or arsenic into silicon. Cross-section transmission electron microscopy and selective area electron diffraction patterns demonstrate that the silicon lattice regains nearly all of its crystallinity after microwave processing of arsenic implanted silicon. Sheet resistance readings indicate the time required for boron or arsenic electrical activation within implanted silicon. Hall measurements demonstrate the extent of dopant activation after microwave heating of implanted silicon. Physical and electrical characterization determined that the mechanism of recrystallization in arsenic implanted silicon is solid phase epitaxial regrowth. The boron implanted silicon samples did not result in enough lattice damage to amorphize the silicon lattice and resulted in low boron activation during microwave annealing even though recrystallization of the Si lattice damage did take place. Despite low boron activation levels, the level of boron activation in this work was higher than that expected from traditional annealing techniques. The kinetics of microwave heating and its effects on implanted Si are also discussed.

36 MATERIALS SCIENCE↗

Cr-doped TiO{sub 2} (rutile): Ferromagnetism in bulk form?

Cr-doped rutile samples in powder and single crystal form have been prepared and studied with particular emphasis on their compositional, structural, and magnetic properties. Both powders and single crystals were characterized using x-ray diffractometry and vibrating sample magnetometry, while crystals were also studied using the x-ray Laue technique, scanning electron microscopy, and energy dispersive x-ray analysis. The results indicate weak ferromagnetic behavior at room temperature (RT) in Cr-doped TiO{sub 2} powders having 2 at. % Cr, while powders with higher amounts of Cr (e.g., 8 or 12 at. %) showed no evidence of ferromagnetism. Following successful floating zone crystal growth of Cr-doped rutile crystals in argon, magnetic measurements taken from the as-grown crystals revealed no indication of RT ferromagnetism over the composition range 2 to 12 at. % Cr. A solubility limit for Cr into the rutile matrix of 3 at. % Cr at RT is suggested.

36 MATERIALS SCIENCE↗

Structural characterization of metastable hcp-Ni thin films epitaxially grown on Au(100) single-crystal underlayers

Ni(1120) epitaxial thin films with hcp structure were prepared on Au(100) single-crystal underlayers at 100 deg. C by ultra high vacuum molecular beam epitaxy. The detailed film structure is studied by in situ reflection high energy electron diffraction, x-ray diffraction, and transmission electron microscopy. The hcp-Ni film consists of two types of variants whose c-axes are rotated around the film normal by 90 deg. each other. An atomically sharp boundary is recognized between the film and the underlayer, where misfit dislocations are introduced. Presence of such dislocations seems to relieve the strain caused by the lattice mismatch between the film and the underlayer.

36 MATERIALS SCIENCE↗

Impact load-induced micro-structural damage and micro-structure associated mechanical response of concrete made with different surface roughness and porosity aggregates

The relationship between the nature of micro damage under impact loading and changes in mechanical behavior associated with different microstructures is studied for concretes made with two different coarse aggregates having significant differences mainly in roughness and porosity - sintered fly ash and uncrushed gravel. A range of techniques including X-ray diffraction, digital image analysis, mercury porosimetry, X-ray computed tomography, laser surface profilometry and scanning electron microscopy were used to characterize the aggregates and micro-structures. The concrete prepared with lightweight aggregates was stronger in compression than the gravel aggregate concrete due to enhanced hydration as a result of internal curing. In the lightweight concrete, it was deduced that an inhomogeneous micro-structure led to strain incompatibilities and consequent localized stress concentrations in the mix, leading to accelerated failure. The pore structure, compressibility, and surface texture of the aggregates are of paramount importance for the micro-cracking growth.

36 MATERIALS SCIENCE↗

Stepwise synthesis, characterization, and electrochemical properties of ordered mesoporous carbons containing well-dispersed Pt nanoparticles using a functionalized template route

A stepwise method is described for the accurately controlled growth of Pt nanoparticles supported on ordered mesoporous carbons (Pt-OMC) by the nanocasting of carbon and metal precursors in the pore channels of mesoporous silicas functionalized with Si-H groups. Results obtained from N{sub 2} adsorption/desorption isotherms and transmission electron microscopy showed well-dispersed Pt nanoparticles (2-3 nm) on Pt-OMC with high surface area (837 m{sup 2} g{sup -1}) and regular pore channels (2.9 nm), which facilitate reactant/product diffusion. X-ray diffraction and X-ray photoelectron spectroscopy indicated that Pt nanoparticles in the Pt-OMC sample were mostly present in the metallic form of a face-centered cubic (fcc) crystalline structure. The Pt-OMC catalyst was found to have superior electrocatalytic properties during oxygen reduction reaction as compared to typical commercial electrocatalysts. - Graphical abstract: A novel procedure has been developed to synthesize ordered carbon mesoporous carbons (OMC) containing well-dispersed and highly electrocatalytic Pt nanoparticles (Pt-OMC) for oxygen reduction reaction. Highlights: > A novel method to incorporate nanosized Pt particles on nanostructure carbons. > Functionalized silica templates were used to control size and distribution of Pt nanoparticles. > Electrochemical measurements of oxygen reduction demonstrated high catalytic activity compared to common commercial catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The influence of A-site rare-earth for barium substitution on the chemical structure and ferroelectric properties of BZT thin films

Rare-earth (RE) doped Ba(Zr,Ti)O{sub 3} (BZT) thin films were prepared by rf-magnetron sputtering from a Ba{sub 0.90}Ln{sub 0.067}Zr{sub 0.09}Ti{sub 0.91}O{sub 3} (Ln=La, Nd) target. The films were deposited at a substrate temperature of 600 deg. C in a high oxygen pressure atmosphere. X-ray diffraction (XRD) patterns of RE-BZT films revealed a <001> epitaxial crystal growth on Nb-doped SrTiO{sub 3}, <001> and <011> growth on single-crystal Si, and a <111>-preferred orientation on Pt-coated Si substrates. Scanning electron microscopy (SEM) showed uniform growth of the films deposited, along with the presence of crystals of about half-micron size on the film's surface. Transmission electron microscopy (TEM) evidenced high crystalline films with thicknesses of about 100 nm for 30 min of sputtering. Electron-probe microanalysis (EPMA) corroborated the growth rate (3.0-3.5 nm/min) of films deposited on Pt-coated Si substrates. X-ray photoelectron spectroscopy (XPS), in depth profile mode, showed variations in photoelectron Ti 2p doublet positions at lower energies with spin-orbital distances characteristic of BaTiO{sub 3}-based compounds. The XPS analysis revealed that lanthanide ions positioned onto the A-site of the BZT-perovskite structure increasing the MO{sub 6}-octahedra distortion (M=Ti, Zr) and, thereby, modifying the Ti-O binding length. Polarization-electric field hysteresis loops on Ag/RE-doped BZT/Pt capacitor showed good ferroelectric behavior and higher remanent polarization values than corresponding non-doped system. - Graphical abstract: XPS narrow-scan spectra of Ti 2p doublets of the Nd-doped BZT films deposited on Pt-coated Si substrate.

36 MATERIALS SCIENCE↗

Anodic vacuum arc developed nanocrystalline Cu-Ni and Fe-Ni thin film thermocouples

This paper deals with the development of nanocrystalline Cu-Ni and Fe-Ni thin film thermocouples (TFTCs) by using ion-assisted anodic vacuum arc deposition technique. The crystallographic structure and surface morphology of individual layer films have been studied by x-ray diffraction and scanning electron microscopy, respectively. The resistivity, temperature coefficient of resistance, and thermoelectric power of as deposited and annealed films have been measured. The observed departure of these transport parameters from their respective bulk values can be understood in terms of intrinsic scattering due to enhanced crystallite boundaries. From the measured values of thermoelectric power and the corresponding temperature coefficient of resistance of annealed Cu, Ni, and Fe films, the calculated values of log derivative of the mean free path of conduction electrons at the Fermi surface with respect to energy (U) are found to be -0.51, 3.22, and -8.39, respectively. The thermoelectric response of annealed Cu-Ni and Fe-Ni TFTCs has been studied up to a maximum temperature difference of 300 deg. C. Reproducibility of TFTCs has been examined in terms of the standard deviation in thermoelectric response of 16 test samples for each pair. Cu-Ni and Fe-Ni TFTCs agree well with their wire thermocouple equivalents. The thermoelectric power values of Cu-Ni and Fe-Ni TFTCs at 300 deg. C are found to be 0.0178 and 0.0279 mV/ deg. C, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High Cubic-Phase Purity InN on MgO (001) Using Cubic-Phase GaN as a Buffer Layer

High cubic-phase purity InN films were grown on MgO (001) substrates by molecular beam epitaxy with a cubic-phase GaN buffer layer. The cubic phase purity of the InN grown layers has been analyzed by high resolution X-ray diffraction, {mu}-Raman scattering and transmission electron microscopy. It is evidenced that the hexagonal-phase content in the InN overlayer much depends on hexagonal-phase content in the cubic-phase GaN buffer layer and increases with increasing the hexagonal-phase GaN content. From Raman scattering measurements, in addition, the InN layer with lowest hexagonal component (6%), only Raman characteristics of cubic TO{sub InN} and LO{sub InN} modes were observed, indicating a formation of a small amount of stacking faults, which does not affect on vibrational property.

36 MATERIALS SCIENCE↗

Single crystal growth and structure of La{sub 4}Cu{sub 3}MoO{sub 12}

We report the synthesis and structure determination of single crystals of La{sub 4}Cu{sub 3}MoO{sub 12} grown from a CuO/KCl flux. This material, whose structure had previously been reported based solely on polycrystalline diffraction data, shows frustrated magnetic behavior and an anti-ferromagnetic ordering of spin-1/2 triangles at low temperatures. The structural and atomic parameters determined from the single crystal data are in very good agreement with those reported previously. However, HREM data showed evidence for disorder in the stacking of the Cu{sub 3}MoO{sub 4} planes, and thus a twinned structural refinement in space group P2{sub 1}/m was replaced by an equivalent disordered structural model in space group Pm. This development of a synthetic route to single crystals of La{sub 4}Cu{sub 3}MoO{sub 12} will allow a more detailed investigation of its complex electronic and magnetic properties. - Graphical abstract: Structural view of a single layer of the triangular lattice of La{sub 4}Cu{sub 3}MoO{sub 12} perpendicular to the b-axis. The copper atoms are blue, the oxide ions are red and the MoO5 trigonal bipyramids are yellow. The isolated triangular clusters of Cu{sub 3}O are outlined by the thin blue lines.

36 MATERIALS SCIENCE↗