Search NASA⌕ Search

SEARCH · Search NASA

Results for “data versions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Solar Occultation Satellite Data and Derived Meteorological Products: Sampling Issues and Comparisons with Aura MLS

Derived Meteorological Products (DMPs, including potential temperature (theta), potential vorticity, equivalent latitude (EqL), horizontal winds and tropopause locations) have been produced for the locations and times of measurements by several solar occultation (SO) instruments and the Aura Microwave Limb Sounder (MLS). DMPs are calculated from several meteorological analyses for the Atmospheric Chemistry Experiment-Fourier Transform Spectrometer, Stratospheric Aerosol and Gas Experiment II and III, Halogen Occultation Experiment, and Polar Ozone and Aerosol Measurement II and III SO instruments and MLS. Time-series comparisons of MLS version 1.5 and SO data using DMPs show good qualitative agreement in time evolution of O3, N2O, H20, CO, HNO3, HCl and temperature; quantitative agreement is good in most cases. EqL-coordinate comparisons of MLS version 2.2 and SO data show good quantitative agreement throughout the stratosphere for most of these species, with significant biases for a few species in localized regions. Comparisons in EqL coordinates of MLS and SO data, and of SO data with geographically coincident MLS data provide insight into where and how sampling effects are important in interpretation of the sparse SO data, thus assisting in fully utilizing the SO data in scientific studies and comparisons with other sparse datasets. The DMPs are valuable for scientific studies and to facilitate validation of non-coincident measurements.

Manney, Gloria↗

Soil Physicochemical Characteristics from Ice Wedge Polygons, Utqiagvik (Barrow), Alaska, Ver. 1

This dataset provides details about soil cores (active layer and permafrost) collected from ice-wedge polygons during field expeditions to Barrow Environmental Observatory, Alaska in April, 2012 and 2013. Core information available are exact core locations; soil horizon descriptions and characteristics; and fundamental soil physico-chemical properties. In February 2016, two columns (carbon and carbon:nitrogen in soil layer) were added to the data but no existing data values changed. See documentation. The new filename is version 2. In July 2016, data for two soil cores were added. The new filename is version 3. This dataset includes two pdf files, one csv file, and one xlsx file.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Comprehensive Assessment of Global Surface Net Radiation Products and Uncertainty Analysis

Abstract Earth surface net radiation ( R n ) characterizes the surface radiation budget and plays a critical role in ecological, biogeochemical, and hydrological processes. The R n products from remote sensing and reanalysis have not been validated comprehensively. In this study, four R n products (Clouds and the Earth's Radiant Energy System [CERES], ERA‐Interim, Modern‐Era Retrospective analysis for Research and Applications version 2, and Japanese 55‐year Reanalysis) were validated using global ground measurements on monthly (255 sites) and annual (172 sites) timescales. These products have similar accuracies, with average root‐mean‐square error (RMSE) ranges of 5.35 W m −2 (monthly) and 2.30 W m −2 (annually). However, varying accuracies and systemic biases exist across different climatic zones. The annual land R n intercomparison illustrates that large uncertainty exists over polar regions and deserts. A significantly negative annual anomaly in the CERES product for the 2001–2008 period is identified when examining annual R n anomalies over the global land surface. Detailed uncertainty analysis indicates that the global CERES R n anomaly is mainly due to different versions of input data such as aerosol optical thickness and atmospheric profiles (in 2006 and 2008) and cloud properties (in 2002). This work demonstrates that temporal analysis provides powerful quality control for global time series satellite products when the validation using ground measurements fails to capture potential issues.

Jia, Aolin↗

Metal distributions out to 0.5 r {sub 180} in the intracluster medium of four galaxy groups observed with Suzaku

We studied the distributions of metal abundances and metal-mass-to-light ratios in the intracluster medium (ICM) of four galaxy groups, MKW 4, HCG 62, the NGC 1550 group, and the NGC 5044 group, out to ∼0.5 r {sub 180} observed with Suzaku. The iron abundance decreases with radius and is about 0.2-0.4 solar beyond 0.1 r {sub 180}. At a given radius in units of r {sub 180}, the iron abundance in the ICM of the four galaxy groups was consistent with or smaller than those of clusters of galaxies. The Mg/Fe and Si/Fe ratios in the ICM are nearly constant at the solar ratio out to 0.5 r {sub 180}. We also studied systematic uncertainties in the derived metal abundances, comparing the results from two versions of atomic data for astrophysicists (ATOMDB) and single- and two-temperature model fits. Since the metals have been synthesized in galaxies, we collected K-band luminosities of galaxies from the Two Micron All Sky Survey catalog and calculated the integrated iron-mass-to-light-ratios (IMLR), or the ratios of the iron mass in the ICM to light from stars in galaxies. The groups with smaller gas-mass-to-light ratios have smaller IMLR values and the IMLR is inversely correlated with the entropy excess. Based on these abundance features, we discussed the past history of metal enrichment processes in groups of galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

PGP: parallel prokaryotic proteogenomics pipeline for MPI clusters, high-throughput batch clusters and multicore workstations

Summary: We present the first public release of our proteogenomic annotation pipeline. We have previously used our original unreleased implementation to improve the annotation of 46 diverse prokaryotic genomes by discovering novel genes, post-translational modifications and correcting the erroneous annotations by analyzing proteomic mass-spectrometry data. This public version has been redesigned to run in a wide range of parallel Linux computing environments and provided with the automated configuration, build and testing facilities for easy deployment and portability.

59 BASIC BIOLOGICAL SCIENCES↗

MO-G-BRE-04: Automatic Verification of Daily Treatment Deliveries and Generation of Daily Treatment Reports for a MR Image-Guided Treatment Machine

Purpose: Two aims of this work were to develop a method to automatically verify treatment delivery accuracy immediately after patient treatment and to develop a comprehensive daily treatment report to provide all required information for daily MR-IGRT review. Methods: After systematically analyzing the requirements for treatment delivery verification and understanding the available information from a novel MR-IGRT treatment machine, we designed a method to use 1) treatment plan files, 2) delivery log files, and 3) dosimetric calibration information to verify the accuracy and completeness of daily treatment deliveries. The method verifies the correctness of delivered treatment plans and beams, beam segments, and for each segment, the beam-on time and MLC leaf positions. Composite primary fluence maps are calculated from the MLC leaf positions and the beam-on time. Error statistics are calculated on the fluence difference maps between the plan and the delivery. We also designed the daily treatment delivery report by including all required information for MR-IGRT and physics weekly review - the plan and treatment fraction information, dose verification information, daily patient setup screen captures, and the treatment delivery verification results. Results: The parameters in the log files (e.g. MLC positions) were independently verified and deemed accurate and trustable. A computer program was developed to implement the automatic delivery verification and daily report generation. The program was tested and clinically commissioned with sufficient IMRT and 3D treatment delivery data. The final version has been integrated into a commercial MR-IGRT treatment delivery system. Conclusion: A method was developed to automatically verify MR-IGRT treatment deliveries and generate daily treatment reports. Already in clinical use since December 2013, the system is able to facilitate delivery error detection, and expedite physician daily IGRT review and physicist weekly chart review.

60 APPLIED LIFE SCIENCES↗

Land productivity and land availability for growing bioenergy crop in the Contiguous US. Center for Advanced Bioenergy and Bioproducts Innovation (CABBI)

The dataset consists of two types of data: the estimate of land productivity (the maximum productivity, MP) and the estimate of land that has low productivity for any major crops planted in the Contiguous United States and then may be available for growing bioenergy crops (the marginal land, ML). All data items are in GeoTiff format, under the World Geodetic System (WGS) 84 project, and with a resolution of 0.0020810045 degree (~250 m). The MP values are calculated based on machine learning model estimated yields of major crops in the CONUS, and its expected value (MP_mean.tif), and associated uncertainty (MP_IDP.tif). The ML availability data have two versions: a deterministic version and a version with uncertainty. The deterministic MLs are determined as the land pixels with expected MP values falling in the range defined in the following criteria, and the MLs with uncertainty are determined as the probability that the MP value of a land pixel falls in the range defined in the following criteria: Criteria_____Description S1________ Current crop and pasture land with MP <= P50 S2________ Current crop and pasture land with MP <= P25 S3________ S1 + current grass and shrub land with P25 < MP < P50 S4________ S2 + current grass and shrub land with P10 < MP < P25 Economic__ Current crop and pasture land with potential profitability < 0 Here P10, P25 and P50 are the 10th, 25th and 50th percentile of crop MP values

Land productivity↗

Hurricane Maria Puerto Rico Landsat Analysis

Hurricane Maria made landfall as a strong Category 4 storm in southeast Puerto Rico on September 20th, 2018. The powerful storm traversed the island in a northwesterly direction causing widespread destruction. This study focused on a rapid assessment of Hurricane Marias impact to Puerto Ricos forests. Calibrated and corrected Landsat 8 image composites for the entire island were generated using Google Earth Engine for a comparable pre-Maria and post-Maria time period that accounted for phenology. Spectral mixture analysis (SMA) using image-derived end members was carried out on both composites to calculate the change in the non-photosynthetic vegetation (Delta-NPV) spectral response, a metric that quantifies the increased fraction of exposed wood and surface litter associated with tree mortality and crown damage from the storm. Hurricane simulations were also conducted using the Weather Research and Forecasting (WRF) regional climate model to estimate wind speeds associated with forest disturbance. Dramatic changes in forest structure across the entire island were evident from pre- and post-Maria composited Landsat 8 images. A Delta-NPV map for only the forested pixels illustrated significant spatial variability in disturbance, with patterns that associated with factors such as slope, aspect and elevation. An initial order-of-magnitude impact estimate based on previous work indicated that Hurricane Maria may have caused mortality and severe damage to 23-31 million trees. Additional field work and image analyses are required to further detail the impact of Hurricane Maria to Puerto Rico forests. A minor update to this dataset was posted on April 20, 2018. The previous version is being retired. If you need access to the prior version of the data, email ngee-tropics-archive@lbl.gov.

54 ENVIRONMENTAL SCIENCES↗

AmeriFlux FLUXNET-1F US-GLE GLEES

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-GLE GLEES. This is the FLUXNET version of the carbon flux data for the site US-GLE GLEES produced by applying the standard ONEFlux (1F) software. Site Description - The Glacier Lakes Ecosystem Experiments Site (GLEES) site is located on land owned by the U.S. government and managed by US Forest Service as part of the Medicine Bow National Forest. Many of the trees in the immediate vicinity of the site are older than 400 years, inter-dispersed among trees much younger in age. This widespread age distribution is most likely a derivation of one of two scenarios: 1) A widespread stand replacement about 400 years ago followed by a slow replacement; 2) Intermittent random disturbances over the past 400 years (Bradford et al. 2008). A decade long spruce beetle outbreak that peaked in 2008 resulted in the mortality of 85% of the forested basal area. There are a few private land holdings in the area, with scattered uncorked mining claims. Following the establishment of the National Forest, mining was banned and grazing was closed in the early 1990's in the upper portion of the GLEES site. Recreation in the winter, when snow can remain in patches into the summer months, snow mobiling and cross country skiing are popular. During the limited summer, hiking, camping and fishing are common activities. The site is accessible by vehicle only during the summer on Forest Road FDR 317, and in the winter, the tower is only reachable via snowmobile.

Frank, John↗

AmeriFlux FLUXNET-1F US-Sta Saratoga

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-Sta Saratoga. This is the FLUXNET version of the carbon flux data for the site US-Sta Saratoga produced by applying the standard ONEFlux (1F) software. Site Description - Sagebrush steppe ecosystem

Ewers, Brent [University of Wyoming]↗

AmeriFlux FLUXNET-1F US-Cwt Coweeta

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-Cwt Coweeta. This is the FLUXNET version of the carbon flux data for the site US-Cwt Coweeta produced by applying the standard ONEFlux (1F) software. Site Description - Mature, secondary, deciduous-dominated forest. Located in southern Appalachian mountains, cove location, near base of forested catchment. Proximity close to USFS Coweeta Hydrologic Laboratory offices. Forest harvesting until early 1930s, unmanaged since.

Oishi, A. Christopher [USDA Forest Service]↗

AmeriFlux FLUXNET-1F CA-LU2 Lutose

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site CA-LU2 Lutose. This is the FLUXNET version of the carbon flux data for the site CA-LU2 Lutose produced by applying the standard ONEFlux (1F) software. Site Description - Lutose is a peat plateau that burned from a moderate forest fire in June 2007. Prior to the fire the site was likley an open canopy of stunted black spruce and a ground layer of Labrador tea shurbs and lichen or sphagnum. No black spruce survived the fire and lichens were still completely absent during this study. By 2019, most charred tree boles has fallen over and vegetation recovery was dominated by dense Labrador tea shrubs and sparse regenerating black spruce with around >150cm of peat.

Schulze, Christopher [University of Alberta]↗

AmeriFlux FLUXNET-1F BR-Xpw XomanoFlux

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site BR-Xpw XomanoFlux. This is the FLUXNET version of the carbon flux data for the site BR-Xpw XomanoFlux produced by applying the standard ONEFlux (1F) software. Site Description - The site is located in the northern Pantanal, in central South America. The site is a grazing area used for cattle ranching and is subject to seasonal flooding during rainy seasons (November to April). Dry seasons are typically May to October.

Dalmagro, Higo [Universidade de Cuiabá - UNIC]↗

GIS Framework for Large River Geomorphic Classification to Aid in the Evaluation of Flow-Ecology Relationships

Assessing the environmental benefits of proposed flow modification to large rivers provides invaluable insight into future hydropower project operations and relicensing activities. Providing a means to quantitatively define flow-ecology relationships is integral in establishing flow regimes that are mutually beneficial to power production and ecological needs. To compliment this effort an opportunity to create versatile tools that can be applied to broad geographic areas has been presented. In particular, integration with efforts standardized within the ecological limits of hydrologic alteration (ELOHA) is highly advantageous (Poff et al. 2010). This paper presents a geographic information system (GIS) framework for large river classification that houses a base geomorphic classification that is both flexible and accurate, allowing for full integration with other hydrologic models focused on addressing ELOHA efforts. A case study is also provided that integrates publicly available National Hydrography Dataset Plus Version 2 (NHDPlusV2) data, Modular Aquatic Simulation System two-dimensional (MASS2) hydraulic data, and field collected data into the framework to produce a suite of flow-ecology related outputs. The case study objective was to establish areas of optimal juvenile salmonid rearing habitat under varying flow regimes throughout an impounded portion of the lower Snake River, USA as an indicator to determine sites where the potential exists to create additional shallow water habitat. Additionally, an alternative hydrologic classification useable throughout the contiguous United States which can be coupled with the geomorphic aspect of this framework is also presented. This framework provides the user with the ability to integrate hydrologic and ecologic data into the base geomorphic aspect of this framework within a geographic information system (GIS) to output spatiotemporally variable flow-ecology relationship scenarios.

Vernon, Christopher R.↗

Final Report, “Exploiting Global View for Resilience”

Final technical report for the "Exploiting Global View for Resilience" project. The GVR project aims to create a new approach to portable, resilient applications. The GVR approach builds on a global view data model,, adding versioning (multi-version), user control of timing and rate (multi-stream), and flexible cross layer error signalling and recovery. With a versioned array as a portable abstraction, GVR enables application programmers to exploit deep scientific and application code insights to manage resilience (and its overhead) in a flexible, portable fashion.

97 MATHEMATICS AND COMPUTING↗

Application of Performance Analysis Tools on SNL ASC Codes

This milestone 1) exercised a broad set of performance profiling and analysis tools, including tools whose development has been promoted by the ASC program; 2) exercised the tools on two different SNL ASC codes, one Sierra code (Sierra/Aria, a C++ codebase) and one RAMSES code (ITS, a Fortran codebase); and 3) exercised the tools on multiple platforms, including the CTS-1 (e.g., Serrano) and ATS-1 Trinity (e.g., Mutrino) platforms. The milestone generated a plethora of strong and weak scaling, trend and profile data for multiple versions and problem cases for each of the two codes. A wealth of experience was gained with the various tools that included identification of problems, an improved understanding of feature sets, enhanced usage documentation, and insights for future tool-development. Results are provided from a large number and variety of performance analysis runs with the target codes, together with instructions for how to make use of the tools with the codes.

97 MATHEMATICS AND COMPUTING↗

Mapping the Concentration Distribution of Contaminant Plumes to the Computational Grid of the Plateau to River Model (Ver. 8.3)

This environmental calculation file (ECF) outlines the process conducted for defining the initial condition groundwater plumes for select contaminants of interest (COIs) to the Plateau River model version 8.3 (P2Rv8.3) domain (CP-57037, Model Package Report: Plateau to River Groundwater Model Version 8.3). Various data sources were combined into a single set of files defining plume conditions at time 1/1/2018. The resulting files are intended for use as inputs for transport modeling to support forecasts of the Central Plateau contaminant plume fate and transport.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Crosslink V.0.11.x User Manual

CrossLink is a novel two-dimensional and three-dimensional geometry and mesh generation software package developed by the Simulation Tools team at Los Alamos National Laboratory. This software represents the third generation of topology-based mesh generation technology developed by the Department of Defense and the Department of Energy with a special focus on complex multi-material hydrodynamic applications, mesh scalability, and high-order element mesh generation. The topology-based meshing approach offered by CrossLink enables users to quickly and easily mesh complex geometries in a repeatable and robust manner. CrossLink’s topology-based meshing approach is well-suited for parametric design studies, parametric design optimization, damage scenario assessment, and iterative design modification (i.e. feature addition and/or removal). CrossLink’s python API allows workflow scripting of the geometry creation and mesh generation process for traceability, repeatability, data provenance, and version control. CrossLink consists of three main components: a graphical user interface (GUI), a geometry creation and mesh generation engine, and a python API that provides a workflow scripting interface to the geometry and meshing functions.

97 MATHEMATICS AND COMPUTING↗