Search NASA⌕ Search

SEARCH · Search NASA

Results for “detection network”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

The recent increase of atmospheric methane from 10 years of ground-based NDACC FTIR observations since 2005

Changes of atmospheric methane total columns (CH 4 ) since 2005 have been evaluated using Fourier transform infrared (FTIR) solar observations carried out at 10 ground-based sites, affiliated to the Network for Detection of Atmospheric Composition Change (NDACC). From this, we find an increase of atmospheric methane total columns of 0.31 ± 0.03 % year –1 (2 σ level of uncertainty) for the 2005–2014 period. Comparisons with in situ methane measurements at both local and global scales show good agreement. We used the GEOS-Chem chemical transport model tagged simulation, which accounts for the contribution of each emission source and one sink in the total methane, simulated over 2005–2012. After regridding according to NDACC vertical layering using a conservative regridding scheme and smoothing by convolving with respective FTIR seasonal averaging kernels, the GEOS-Chem simulation shows an increase of atmospheric methane total columns of 0.35 ± 0.03 % year –1 between 2005 and 2012, which is in agreement with NDACC measurements over the same time period (0.30 ± 0.04 % year –1 , averaged over 10 stations). Analysis of the GEOS-Chem-tagged simulation allows us to quantify the contribution of each tracer to the global methane change since 2005. We find that natural sources such as wetlands and biomass burning contribute to the interannual variability of methane. However, anthropogenic emissions, such as coal mining, and gas and oil transport and exploration, which are mainly emitted in the Northern Hemisphere and act as secondary contributors to the global budget of methane, have played a major role in the increase of atmospheric methane observed since 2005. Furthermore based on the GEOS-Chem-tagged simulation, we discuss possible cause(s) for the increase of methane since 2005, which is still unexplained.

54 ENVIRONMENTAL SCIENCES↗

The use of Doppler radar to help forecast the development of thunderstorms

The role of Doppler radars in forecasting the location and timing of the initiation of thunderstorms both over Kennedy Space Center and central Florida is analyzed. The data used in this analysis was collected with two Doppler radars with high temporal and spatial resolution throughout the troposphere. Previous studies of thunderstorm initiation in the vicinity of Kennedy Space Center, including synoptic and site-specific observations are outlined. As a result of the analysis of nine cases of thunderstorm initiation, it is concluded that an expert system could be developed that would take input data from the existing field mill network, instrumented tower network, lightning detection system, from sounding, and from Doppler-radar-based algorithms. Such a system would be able to determine a probability of thunderstorm development in the next 10, 20, and 30 minutes for the area of interest.

Eilts, Michael D.↗

Automated screening of propulsion system test data by neural networks, phase 1

The evaluation of propulsion system test and flight performance data involves reviewing an extremely large volume of sensor data generated by each test. An automated system that screens large volumes of data and identifies propulsion system parameters which appear unusual or anomalous will increase the productivity of data analysis. Data analysts may then focus on a smaller subset of anomalous data for further evaluation of propulsion system tests. Such an automated data screening system would give NASA the benefit of a reduction in the manpower and time required to complete a propulsion system data evaluation. A phase 1 effort to develop a prototype data screening system is reported. Neural networks will detect anomalies based on nominal propulsion system data only. It appears that a reasonable goal for an operational system would be to screen out 95 pct. of the nominal data, leaving less than 5 pct. needing further analysis by human experts.

Hoyt, W. Andes↗

The NDSC Primary Site at the Observatoire De Haute-provence: Ozone and Aerosols Observations (1986-1992)

The primary site of the newly implemented Network for Detection of Stratospheric Changes (NDSC) includes three main sites in the alpine regions of southern Europe. At one of these observatories, a coherent set of experimental systems has been established to monitor on a long-term basis ozone, aerosols, minor constituents, and temperature vertical distributions in the troposphere and stratosphere. Such techniques include several lidar systems, balloon-borne sondes and ultraviolet visible spectrometry. Lidar measurements of stratospheric aerosols are performed on a routine basis, since 1980. These include the vertical distribution of the extinction and backscattering coefficients from the tropopause. Recently, measurements performed following the eruption of Mount Pinatubo, have allowed researchers to follow the time evolution of the aerosol cloud in middle latitude regions.

Megie, G.↗

Ground-based microwave monitoring of stratospheric ozone

A microwave instrument developed for operational measurements of ozone for the Network for Detection of Stratospheric Change is discussed. The instrument observes two spectral lines near 3-mm wavelength with a bandwidth of 630 MHz, allowing profile retrieval from 20 to 70 km. The observing technique and calibration procedures are described. The measurement forward model and retrieval algorithm are formulated. Preliminary comparisons with a colocated ground-based lidar and the SAGE II instrument are presented. The measurements are shown to typically agree to within 5 to 10 percent.

Parrish, A.↗

Assimilation of a knowledge base and physical models to reduce errors in passive-microwave classifications of sea ice

An expert system framework has been developed to classify sea ice types using satellite passive microwave data, an operational classification algorithm, spatial and temporal information, ice types estimated from a dynamic-thermodynamic model, output from a neural network that detects the onset of melt, and knowledge about season and region. The rule base imposes boundary conditions upon the ice classification, modifies parameters in the ice algorithm, determines a `confidence' measure for the classified data, and under certain conditions, replaces the algorithm output with model output. Results demonstrate the potential power of such a system for minimizing overall error in the classification and for providing non-expert data users with a means of assessing the usefulness of the classification results for their applications.

Maslanik, J. A.↗

Acoustic target detection and classification using neural networks

A neural network approach to the classification of acoustic emissions of ground vehicles and helicopters is demonstrated. Data collected during the Joint Acoustic Propagation Experiment conducted in July of l991 at White Sands Missile Range, New Mexico was used to train a classifier to distinguish between the spectrums of a UH-1, M60, M1 and M114. An output node was also included that would recognize background (i.e. no target) data. Analysis revealed specific hidden nodes responding to the features input into the classifier. Initial results using the neural network were encouraging with high correct identification rates accompanied by high levels of confidence.

Robertson, James A.↗

Neural networks: Application to medical imaging

The research mission is the development of computer assisted diagnostic (CAD) methods for improved diagnosis of medical images including digital x-ray sensors and tomographic imaging modalities. The CAD algorithms include advanced methods for adaptive nonlinear filters for image noise suppression, hybrid wavelet methods for feature segmentation and enhancement, and high convergence neural networks for feature detection and VLSI implementation of neural networks for real time analysis. Other missions include (1) implementation of CAD methods on hospital based picture archiving computer systems (PACS) and information networks for central and remote diagnosis and (2) collaboration with defense and medical industry, NASA, and federal laboratories in the area of dual use technology conversion from defense or aerospace to medicine.

Clarke, Laurence P.↗

The effect of the Mt. Pinatubo aerosol on the NHO3 column over Mauna Loa, Hawaii

A very high resolution infrared solar spectrometer system for the Network for Detection of Stratospheric Change has been routinely operated at the Mauna Loa Observatory in Hawaii since November, 1991. Solar absorption spectra are normally taken one day a week at sunrise. We report the analysis of these spectra for the vertical column amount of nitric acid (HNO3) vapor. The observations began four months after the arrival of volcanic aerosols from Mt. Pinatubo over the site. Although quite variable, total HNO3 columns were initially about 7 x 10(exp 15) molecules/sq cm and have decreased about 30% in the following two years.

David, Shelle J.↗

Ground-based microwave monitoring of middle atmosphere ozone: Comparison to lidar and Stratospheric and Gas Experiment 2 satellite observations

A dedicated ground-based microwave radiometer was in operation to monitor the middle atmospheric ozone concentration at Table Mountain Facility (TMF) of the Jet Propulsion Laboratory (JPL), California (34.4 deg N, 117.7 deg W) from July 1989 to June 1992, as a part of the Network for Detection of Stratospheric Change. Ozone profiles from 56 to 0.04 mbar (approximately 20 - 70 km) were retrieved from the microwave data. The focus in this paper is to validate the microwave ozone observations from 56 to 1 mbar by comparing the results from a JPL ground-based lidar located at the same site and from the Stratospheric Aerosol and Gas Experiment 2 (SAGE 2) satellite overpasses within 1000 km of TMF and to examine the ability of these instruments to detect short-term, seasonal, and annual variations in ozone. The profile comparison results show that the mean differences of microwave ozone from lidar and SAGE 2 are about 5% or less and the root-mean-square scatter about the mean is mainly from the precision of the instruments. A correlation analysis of ozone time series suggests highly significant correlations up to 2.4 mbar between lidar and microwave measurements and up to 1 mbar between SAGE 2 and microwave. The short-term and seasonal variation of the ozone profile seen in the microwave measurements is shown to be consistent with the observations of lidar and SAGE 2, and the interannual variation of ozone appears to be detectable within an accuracy of a few percent with the microwave instrument.

Tsou, J. J.↗

Temperature climatology of the middle atmosphere from long-term lidar measurements at mid- and low-latitudes

The temperature structure of the middle atmosphere has been studied for several decades using a variety of techniques. However, temperature profiles derived from lidar measurements can provide improved vertical resolution and accuracy. Lidars can also provide long-term data series relatively absent of instrumental drift, and integration of the measurements over several hours removes most of the gravity wave-like short-scale disturbances. This paper describes a seasonal climatology of the middle atmosphere temperature derived from lidar measurements obtained at several mid- and low-latitude locations. Results from the following lidars, which have all obtained a long-term measurement record, were used in this study: the two Rayleigh lidars of the Service d'Aeronomie du CNRS, France, located at the Observatoire de Haute Provence (OHP, 44.0 deg N) and at the Centre d'Essais des Landes (CEL, 44.0 deg N), the two Rayleigh/Raman lidars of the Jet Propulsion Laboratory, USA, located at Table Mountain, California (TMF, 34.4 deg N) and at Mauna Loa, Hawaii (MLO, 19.5 deg N), and the Colorado State University, USA, sodium lidar located at Fort Collins, Colorado (CSU, 40.6 deg N). The overall data set extends from 1978 to 1997 with different periods of measurements depending on the instrument. Three of the instruments are located at primary or complementary stations (OHP, TMF, MLO) within the Network for Detection of Stratospheric Change (NDSC). Several aspects of the temperature climatology obtained by lidar in the middle atmosphere are presented, including the climatological temperature average through the year; the annual and semi-annual components, and the differences compared to the CIRA-86 climatological model.

McDermid, I. Stuart↗

Evaluation and optimization of lidar temperature analysis algorithms using simulated data

The middle atmosphere (20 to 90 km altitude) ha received increasing interest from the scientific community during the last decades, especially since such problems as polar ozone depletion and climatic change have become so important. Temperature profiles have been obtained in this region using a variety of satellite-, rocket-, and balloon-borne instruments as well as some ground-based systems. One of the more promising of these instruments, especially for long-term high resolution measurements, is the lidar. Measurements of laser radiation Rayleigh backscattered, or Raman scattered, by atmospheric air molecules can be used to determine the relative air density profile and subsequently the temperature profile if it is assumed that the atmosphere is in hydrostatic equilibrium and follows the ideal gas law. The high vertical and spatial resolution make the lidar a well adapted instrument for the study of many middle atmospheric processes and phenomena as well as for the evaluation and validation of temperature measurements from satellites, such as the Upper Atmosphere Research Satellite (UARS). In the Network for Detection of Stratospheric Change (NDSC) lidar is the core instrument for measuring middle atmosphere temperature profiles. Using the best lidar analysis algorithm possible is therefore of crucial importance. In this work, the JPL and CNRS/SA lidar analysis software were evaluated. The results of this evaluation allowed the programs to be corrected and optimized and new production software versions were produced. First, a brief description of the lidar technique and the method used to simulate lidar raw-data profiles from a given temperature profile is presented. Evaluation and optimization of the JPL and CNRS/SA algorithms are then discussed.

Leblanc, Thierry↗

Infrared Measurements of Atmospheric Constituents

This research program studies atmospheric trace gas concentrations and altitude distributions, particularly for those gases that are important in stratospheric chemistry and radiative balance. Measurements are made with infrared remote sensing instruments, either ground based or balloon-borne. Most of the ground based instruments are part of the Network for Detection of Stratospheric Change (NDSC), including a very high spectral resolution solar absorption spectrometer at Mauna Loa Observatory and similar system at McMurdo Station, Antarctica (operated in collaboration with the New Zealand NIWA). Additionally, we are deriving stratospheric constituent data from the spectra obtained at the DOE Atmospheric Radiation Measurements (ARM) program's site in north-central Oklahoma. We have an atmospheric emission spectrometer system at the South Pole (with additional support from NSF), and an identical NSF support instrument at Eureka, NWT, Canada. Our balloon-borne instruments include a very high resolution solar absorption spectrometer system, a smaller, slightly lower resolution solar spectrometer system, a high resolution atmospheric emission spectrometer, and several medium resolution emission spectrometers (CAESRs) that are usually flown piggyback. During the past year, we participated in the MANTRA balloon flight from Saskatoon, Saskatchewan, with the high resolution solar spectrometer system. Several of our instruments were extensively compared to (UARS) Upper Atmosphere Research Satellite observations, and so provide a data set with known connections to UARS. In the longer term, the data can be used to relate UARS data to (EOS) Earth Observing System and (ADEOS) Advanced Airborne Earth Observing System.

Frank J Murcray↗

Analysis of Atmospheric Trace Constituents from High Resolution Infrared Balloon-Borne and Ground-Based Solar Absorption Spectra

Recent results and ongoing studies of high resolution solar absorption spectra will be presented. The analysis of these spectra is aimed at the identification and quantification of trace constituents important in atmospheric chemistry of the stratosphere and upper troposphere. Analysis of balloon-borne and ground-based spectra obtained at 0.0025/ cm covering the 700-2200/ cm interval will be presented. Results from ground-based 0.02/ cm solar spectra, from several locations such as Denver, South Pole, M. Loa, and New Zealand will also be shown. The 0.0025/ cm spectra show many new spectroscopic features. The analysis of these spectra, along with corresponding laboratory spectra, improves the spectral line parameters, and thus the accuracy of trace constituents quantification. The combination of the recent balloon flights, with earlier flights data since 1978 at 0.02/ cm resolution, provides trends analysis of several stratospheric trace species. Results for COF2, F22, SF6, and other species will be presented. Analysis of several ground-based solar spectra provides trends for HCl, HF and other species. The retrieval methods used for total column density and altitude distribution for both ground-based and balloon-borne spectra will be presented. These are extended for the analysis of the ground-based spectra to be obtained by the high resolution interferometers of the Network for Detection of Stratospheric Change (NDSC). Progress or the University of Denver studies for the NDSC will be presented. This will include intercomparison of solar spectra and trace gases retrievals obtained from simultaneous scans by the high resolution (0.0025/ cm) interferometers of BRUKER and BOMEM.

Goldman, A.↗

Nutrient Stress Detection in Corn, Using Neural Networks and AVIRIS Hyperspectral Imagery

The US Department of Agriculture (USDA) Agricultural Research Service (ARS) Variable Rate (VRAT) Nitrogen Application site in Shelton, Nebraska, represents a well-documented, corn-growing quarter section. The USDA VRAT site is used to systematically study nutrient stress in corn by varying sub-plot application of fertilizer. The field has four replicates of five blocks that vary by nitrogen treatment from 0-kg/ha to 200-kg/ha in 50-kg/ha increments. The treatment blocks are set out in a randomized, complete block design. Typically, the VRAT is planted in a ridge till, monoculture corn and is watered by a central pivot irrigation system on a three-day period. Since water stress can increase spectral reflectance from corn leaves, it is important that the N-application plots be adequately watered so that only nutrient-related stress will predominate. A figure shows imagery of the USDA VRAT site with the fertilizer amounts for each block shown. Low-altitude Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) hyperspectral imagery was acquired over the Shelton, Nebraska, VRAT site on July 22, 1999. The overflight produced 3-meter pixels with 224 spectral bands. Ground personnel supported the mission with measurements at the time of the overflight. The image data was pre-processed at JPL before being sent out to an investigator. The data arrived radiometrically corrected, allowing ready application of an atmospheric correction procedure. The Atmosphere Removal Program (ATREM) was used to perform an atmospheric correction. The AVIRIS imagery after ATREM correction was output as relative reflectance. This relative reflectance file was scaled by an empirical line procedure to provide reflectances that matched closely those measured in the field.

Estep, Lee↗

Neural-Net Based Optical NDE Method for Structural Health Monitoring

This paper answers some performance and calibration questions about a non-destructive-evaluation (NDE) procedure that uses artificial neural networks to detect structural damage or other changes from sub-sampled characteristic patterns. The method shows increasing sensitivity as the number of sub-samples increases from 108 to 6912. The sensitivity of this robust NDE method is not affected by noisy excitations of the first vibration mode. A calibration procedure is proposed and demonstrated where the output of a trained net can be correlated with the outputs of the point sensors used for vibration testing. The calibration procedure is based on controlled changes of fastener torques. A heterodyne interferometer is used as a displacement sensor for a demonstration of the challenges to be handled in using standard point sensors for calibration.

Decker, Arthur J.↗

Sensitivity and Calibration of Non-Destructive Evaluation Method That Uses Neural-Net Processing of Characteristic Fringe Patterns

This paper answers some performance and calibration questions about a non-destructive-evaluation (NDE) procedure that uses artificial neural networks to detect structural damage or other changes from sub-sampled characteristic patterns. The method shows increasing sensitivity as the number of sub-samples increases from 108 to 6912. The sensitivity of this robust NDE method is not affected by noisy excitations of the first vibration mode. A calibration procedure is proposed and demonstrated where the output of a trained net can be correlated with the outputs of the point sensors used for vibration testing. The calibration procedure is based on controlled changes of fastener torques. A heterodyne interferometer is used as a displacement sensor for a demonstration of the challenges to be handled in using standard point sensors for calibration.

Decker, Arthur J.↗