Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed inference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

A case for catastrophic early degassing of the earth.

Evidence is given for the occurrence in early earth history of massive escape of volatiles from the interior of the earth to its surface, which must have had catastrophic proportions. The mechanism and time of this event are inferred from the abundances and distribution of volatiles in the atmosphere, hydrosphere and crust, and from meteorite studies, and geophysical and astronomical observations. This event is linked to the melting of the earth during accretion which resulted in the concentration of U, Th, K and Pb in the outermost portion of the earth and in virtually complete expulsion of nonradiogenic Ar, Ne and Kr from its interior.

Fanale, F. P.↗

Monthly and seasonal occurrences of potential flash flood-producing rains determined from Manually Digitized Radar data

An analysis is conducted of a small 4-year climatological data base of Manually Digitized Radar (MDR) data to infer the monthly and seasonal distributions of the relative frequency of occurrence of potential flash flood-producing rains over the Central and Eastern U.S. Some possible meteorological mechanisms for producing potential flash flooding rains are discussed in terms of the relative maxima and minima in the monthly and seasonal frequency distributions over the MDR network. Frequencies were found to be generally higher in more southern locations and lower farther north in all months and seasons. However, most locations experienced an annual cycle in the frequency of occurrence with maxima in summer and minima in winter. In given seasons and months, local areas of maximum and minimum occurrences may be related to quasi-stationary meteorological processes that trigger and organize intense convection over a common area.

Wilson, G. S.↗

Sensitivity of constrained linear inversions to the selection of the Lagrange multiplier

The influence of the choice of the Lagrange multiplier on constrained linear inversions is explored, with reference made to applications in inferring the columnar aerosol size distributions from spectral aerosol optical depth measurements. A range of the Lagrange multiplier is examined to find all positive solutions for the solution vector, which represents modifying factors to the assumed form of the size distribution. An iterative method is devised to constrain the calculations to consideration of only positive quantities and a requirement that the regression fit to data be consistent with measurement errors. The determination of the variances and covariances is formulated and applied to existing data sets for optical depth. Variances in the solution are found to be large for particle radii when the information content of the data is small.

King, M. D.↗

Chromospheric and transition region structure of the Herbig emission stars HR 5999 and BN Ori

The IUE spectra of HR 5999 and BN Ori were analyzed, showing strong emission lines of C II, C IV, O I, and Si IV (also Mg II in HR 5999), indicating the presence of chromospheres and transition regions around these high mass premain sequence (PMS) stars. Infrared, optical, and ultraviolet observations show that BN Ori has a spectral type of FO-2 IIIe, a bolometric luminosity of 36 L, age 1.5 million yr, and mass 2 to 2.5 solar mass. As HR 5999 fades, the ratio of total to selective absorption increases indicating the appearance of larger grains or changes in grain alignment. Emission measure distributions are used to investigate the atmospheric structure of the stars. As HR 5999 fades the emission measure distribution rises systematically and the inferred transition region pressures increase. The transition region and chromospheric radiative losses are large and imply input mechanical energy fluxes similar to those of lower mass PMS stars.

Brown, A.↗

Variation in ejecta size with ejection velocity

The sizes and ranges of over 25,000 secondary craters around twelve large primaries on three different planets were measured and used to infer the size-velocity distribution of that portion of the primary crater ejecta that produced the secondaries. The ballistic equation for spherical bodies was used to convert the ranges to velocities, and the velocities and crater sizes were used in the appropriate Schmidt-Holsapple scaling relation of estimate ejecta sizes, and the velocity exponent was determined. The latter are generally between -1 and -13, with an average value of about -1.9. Problems with data collection made it impossible to determine a simple, unique relation between size and velocity.

Vickery, Ann M.↗

Low-Luminosity embedded sources and their environs

A far-infrared and submillimeter study of regions within 0.03 pc of the low-luminosity sources embedded in the clouds B335, L723, B361, L1455, and L1551 is presented along with CO molecular line results on the extended environments of these sources out to 0.3 pc. Three of the embedded objects are definite bipolar outflow sources, one may be associated with an observed outflow, and one has no observable outflow. Data on the outflows are combined with determination of the luminosity of the embedded objects, and of the temperature and matter distribution about the sources, to infer the evolutionary stage of the embedded sources.

Davidson, J. A.↗

Grain optical properties

The optical properties of small grains provide the link between the infrared observations presented in Chapter 1 and the dust composition described in Chapter 3. In this session, the optical properties were discussed from the viewpoint of modeling the emission from the dust coma and the scattering in order to draw inference about the dust size distribution and composition. The optical properties are applied to the analysis of the infrared data in several ways, and these different uses should be kept in mind when judging the validity of the methods for applying optical constants to real grains.

Hanner, Martha↗

Estimation of regional surface resistance to evapotranspiration from NDVI and thermal-IR AVHRR data

Infrared surface temperatures from satellite sensors have been used to infer evaporation and soil moisture distribution over large areas. However, surface energy partitioning to latent versus sensible heat changes with surface vegetation cover and water availability. The hypothesis that the relationship between surface temperature and canopy density is sensitivite to seasonal changes in canopy resistance of conifer forests is presently tested. Surface temperature and canopy density were computed for a 20 x 25 km forested region in Montana, from the NOAA/AVHRR for 8 days during the summer of 1985. A forest ecosystem model, FOREST-BGC, simulated canopy resistance for the same period. For all eight days, surface temperatures had high association with canopy density, measured as Normalized Difference Vegetation Index, implying that latent heat exchange is the major cause of spatial variations in surface radiant tmeperatures.

Nemani, Ramakrishna R.↗

Determining Asymmetry Of A Weld Puddle

Sensing-and-data-processing subsystem provides information of asymmetry of weld puddle with respect to original midplane of joint. Shape of puddle inferred from surface-temperature distribution. Part of welding-control system which enables system to correct for asymmetry.

Gutow, David A.↗

Thermal emission spectroscopy of the middle atmosphere

The general objective of this research is to obtain, via remote sensing, simultaneous measurements of the vertical distributions of stratospheric temperature, ozone, and trace constituents that participate in the catalytic destruction of ozone (NO(sub y): NO, NO2, NO3, HNO3, ClONO2, N2O5, HNO4; Cl(sub x): HOCl), and the source gases for the catalytic cycles (H2O, CH4, N2O, CF2Cl2, CFCl3, CCl4, CH3Cl, CHF2Cl, etc.). Data are collected during a complete diurnal cycle in order to test our present understanding of ozone chemistry and its associate catalytic cycles. The instrumentation employed is an emission-mode, balloon-borne, liquid-nitrogen-cooled Michelson interferometer-spectrometer (SIRIS), covering the mid-infrared range with a spectral resolution of 0.020 cm(exp -1). Cryogenic cooling combined with the use of extrinsic silicon photoconductor detectors allows the detection of weak emission features of stratospheric gaseous species. Vertical distributions of these species are inferred from scans of the thermal emission of the limb in a sequence of elevation angles. The fourth SIRIS balloon flight was carried out from Palestine, Texas on September 15-16, 1986 with 9 hours of nighttime data (40 km). High quality data with spectral resolution 0.022 cm(exp -1), were obtained for numerous limb sequences. Fifteen stratospheric species have been identified to date from this flight: five species from the NO(sub y) family (HNO3, NO2, NO, ClONO2, N2O5), plus CO2, O3, H2O, N2O, CH4, CCl3F, CCl2F2, CHF2Cl, CF4, and CCl4. The nighttime values of N2O5, ClONO2, and total odd nitrogen have been measured for the first time, and compared to model results. Analysis of the diurnal variation of N2O5 within the 1984 and 1986 data sets, and of the 1984 ClONO2 measurements, were presented in the literature. The demonstrated ability of SIRIS to measure all the major NO(sub y) species, and therefore to determine the partitioning of the nitrogen family over a continuous diurnal cycle, is a powerful tool in the verification and improvement of photochemical modeling.

Kunde, V. G.↗

The spatial and kinematic structure of QSO metal-line absorption systems

Recent attempts to infer the spatial and kinematic distributions of the material responsible for absorption lines observed in the spectra of background QSOs are presented. Current models of the absorbing regions are compared, and initial observational results are described. This research is expected to lead eventually to a detailed picture of the extended gaseous halo regions of galaxies at early evolutionary stages and to an understanding of the physical processes at work in these halos.

Lanzetta, Kenneth M.↗

Cogenetic Rock Fragments from a Lunar Soil: Evidence of a Ferroan Noritic-Anorthosite Pluton on the Moon

The impact that produced North Ray Crater, Apollo 16 landing site, exhumed rocks that include relatively mafic members of the lunar ferroan anorthositic suite. Bulk and mineral compositions indicate that a majority of 2-4 mm lithic fragments from sample 67513, including impact breccias and monomict igneous rocks, are related to a common noritic-anorthosite precursor. Compositions and geochemical trends of these lithic fragments and of related samples collected along the rim of North Ray Crater suggest that these rocks derived from a single igneous body. This body developed as an orthocumulate from a mixture of cumulus plagioclase and mafic intercumulus melt, after the plagioclase had separated from any cogenetic mafic minerals and had become concentrated into a crystal mush (approximately 70 wt% plagioclase, 30 wt% intercumulus melt). We present a model for the crystallization of the igneous system wherein "system" is defined as cumulus plagioclase and intercumulus melt. The initial accumulation of plagioclase is analogous to the formation of thick anorthosites of the terrestrial Stillwater Complex; however, a second stage of formation is indicated, involving migration of the cumulus-plagioclase-intercumulus-melt system to a higher crustal level, analogous to the emplacement of terrestrial massif anorthosites. Compositional variations of the lithic fragments from sample 67513 are consistent with dominantly equilibrium crystallization of intercumulus melt. The highly calcic nature of orthocumulus pyroxene and plagioclase suggests some reaction between the intercumulus melt and cumulus plagioclase, perhaps facilitated by some recrystallization of cumulus plagioclase. Bulk compositions and mineral assemblages of individual rock fragments also require that most of the mafic minerals fortned in close contact with cumulus plagioclase, not as separate layers. The distribution of compositions (and by inference, modes) has a narrow peak at anorthosite and a broader, larger peak at noritic anoilhosite. Characteristics of the samples and their geochemical trends imply an origin in a system that was large relative to the (unknown) size of the impact that produced the breccias of ferroan noritic-anorthosite composition that were excavated later by the formation of North Ray Crater, and they appear to be consistent with an origin of the suite within a perched plagioclase cumulate. If the Moon's crust formed by accumulation of plagioclase in a magma ocean, ferroan noritic anothosite, formed as an orthocumulate, is an alternative to extensive adcumulus formation of ferroan anorthosite (greater than 90 vol% plagiclase). This provides a relatively mafic ferroan anorthositic component (approximately 15 vol% mafics), which is required by mass-balance models of compositions of polymict lunar-crustal materials. The inferred bulk composition of the system of cumulus plagioclase and intercumulus melt is similar to that of ferroan regolith breccia MacAlpine Hills 88104/5, a lunar-highland meteorite, and may represent a common and widespread component of the Moon's early highland crust.

Jolliff, B. L.↗

A Theoretical and Observational Study of Large and Small-Scale Dynamics in the Mesosphere and Lower Thermosphere in Support of TIMED

The long-term objectives of this IDS component of the TIMED mission are to define, through a combination of modeling and data analysis efforts, the influences of large- and small-scale waves (tidal, planetary, and gravity waves) on the circulation, structure, composition, and variability of the mesosphere and lower thermosphere. Particular emphasis is aimed at the TIMED core science objectives of defining the structure and energetics of the TIMED core region, approx. 60 to 180 km. To do so, however, it is also essential to understand the dynamical influences and contributions because of their considerable direct and indirect influences on structure and energetics. To accomplish these goals, we anticipate two parallel modeling efforts and a significant data analysis effort following TIMED launch. The modeling efforts will address both: the residual circulation response to mean and variable wave forcing of the MLT through development of a spherical model addressing balanced flow dynamics and transience and a more comprehensive effort addressing gravity wave propagation, interactions, nonlinearity, and spectral evolution and transports in canonical and realistic environments. The data analysis effort is envisioned to involve application of ground-based measurements and TIMED data analyses to a quantification of gravity wave forcing and effects at one or more sites with comprehensive measurement suites and extension of the inferred forcing globally, based on distributed ground-based measurements. Research results and publications resulting from the research are included.

Fritts, David C.↗

A Diagnostic Analysis of the Kennedy Space Center LDAR Network: Data Characteristics - 1

An analytical framework is developed in which to analyze climatological VHF (66 MHz) radiation measurements taken by the Kennedy Space Center Lightning Detection and Ranging (LDAR) network. A 19-month noise-filtered sample of LDAR observations is examined using this framework. It is found that the climatological VHF source density as observed by LDAR falls off approximately 10 dB every 71 km of ground range away from the network centroid (a 31 km e-folding scale). From this framework it is inferred that the underlying source distribution is likely inverse exponential in amplitude, with a log-slope of 126-147 mW(sup -1/2). The underlying vertical distribution of VHF sources is approximately normally distributed with a mean altitude of 9 km and a standard deviation of 2.7 km; this implies that the loss of below-horizon sources has a negligible effect on column-integrated source densities within 200 km ground range. At medium to far ranges, location errors are primarily radial and have a slightly asymmetric distribution whose first moment increases as range squared. Error moments estimated from observed lightning are significantly higher than those from aircraft-based signal generator or analytic solution estimates, suggesting that timing errors arising from poor signal identification and discrimination may dominate over timing errors arising from nominal sensor resolution. The VHF source properties of individual LDAR-observed flashes are computed and an analytic expression for flash detection efficiency vs. range is derived. This reveals nearly constant flash detection efficiency to 80-94 km range from the network centroid.

Boccippio, D. J.↗

Probing Ganymede's Magnetosphere with Field Line Resonances

We report on the spectrum of field line resonances identified in data acquired by the Galileo spacecraft within Ganymede's magnetosphere on a relatively low latitude pass. We infer properties of the plasma distribution and its transport from the observed spectrum. The harmonic structure in the spectrum of the magnetometer data agrees very well with the frequencies predicted for resonances of a dipole field. The spectrum implies a density of 2 amu per cubic centimeter near the equator on closed field lines of Ganymede's magnetic field inside of 2 RG (Ganymede radii). This density is significantly reduced relative to the local density of the Jovian plasma sheet near Ganymede (less than or equal to 8 electrons per cubic centimeter, or approximately equal to 100 amu per cubic centimeter for an average ion mass per charge of 20 amu and average charge of 1.5 electron charges). A shadowing effect of Ganymede for the flow of particles injected at a reconnection layer on the side of the moon downstream relative to the direction of torus plasma flow accounts for the marked density depletion. Implications for conducting paths near Ganymede's surface are considered.

Volwerk, M.↗

Pressure Gradient Effects on Hypersonic Cavity Flow Heating

The effect of a pressure gradient on the local heating disturbance of rectangular cavities tested at hypersonic freestream conditions has been globally assessed using the two-color phosphor thermography method. These experiments were conducted in the Langley 31-Inch Mach 10 Tunnel and were initiated in support of the Space Shuttle Return-To-Flight Program. Two blunted-nose test surface geometries were developed, including an expansion plate test surface with nearly constant negative pressure gradient and a flat plate surface with nearly zero pressure gradient. The test surface designs and flow characterizations were performed using two-dimensional laminar computational methods, while the experimental boundary layer state conditions were inferred using the measured heating distributions. Three-dimensional computational predictions of the entire model geometry were used as a check on the design process. Both open-flow and closed-flow cavities were tested on each test surface. The cavity design parameters and the test condition matrix were established using the computational predictions. Preliminary conclusions based on an analysis of only the cavity centerline data indicate that the presence of the pressure gradient did not alter the open cavity heating for laminar-entry/laminar-exit flows, but did raise the average floor heating for closed cavities. The results of these risk-reduction studies will be used to formulate a heating assessment of potential damage scenarios occurring during future Space Shuttle flights.

Everhart, Joel L.↗

Pressure Gradient Effects on Hypersonic Cavity Flow Heating

The effect of a pressure gradient on the local heating disturbance of rectangular cavities tested at hypersonic freestream conditions has been globally assessed using the two-color phosphor thermography method. These experiments were conducted in the Langley 31-Inch Mach 10 Tunnel and were initiated in support of the Space Shuttle Return-To-Flight Program. Two blunted-nose test surface geometries were developed, including an expansion plate test surface with nearly constant negative pressure gradient and a flat plate surface with nearly zero pressure gradient. The test surface designs and flow characterizations were performed using two-dimensional laminar computational methods, while the experimental boundary layer state conditions were inferred using the measured heating distributions. Three-dimensional computational predictions of the entire model geometry were used as a check on the design process. Both open-flow and closed-flow cavities were tested on each test surface. The cavity design parameters and the test condition matrix were established using the computational predictions. Preliminary conclusions based on an analysis of only the cavity centerline data indicate that the presence of the pressure gradient did not alter the open cavity heating for laminar-entry/laminar-exit flows, but did raise the average floor heating for closed cavities. The results of these risk-reduction studies will be used to formulate a heating assessment of potential damage scenarios occurring during future Space Shuttle flights.

Everhart, Joel L.↗

Aero-Heating of Shallow Cavities in Hypersonic Freestream Flow

The purpose of these experiments and analysis was to augment the heating database and tools used for assessment of impact-induced shallow-cavity damage to the thermal protection system of the Space Shuttle Orbiter. The effect of length and depth on the local heating disturbance of rectangular cavities tested at hypersonic freestream conditions has been globally assessed using the two-color phosphor thermography method. These rapid-response experiments were conducted in the Langley 31-Inch Mach 10 Tunnel and were initiated immediately prior to the launch of STS-114, the initial flight in the Space Shuttle Return-To-Flight Program, and continued during the first week of the mission. Previously-designed and numerically-characterized blunted-nose baseline flat plates were used as the test surfaces. Three-dimensional computational predictions of the entire model geometry were used as a check on the design process and the two-dimensional flow assumptions used for the data analysis. The experimental boundary layer state conditions were inferred using the measured heating distributions on a no-cavity test article. Two test plates were developed, each containing 4 equally-spaced spanwise-distributed cavities. The first test plate contained cavities with a constant length-to-depth ratio of 8 with design point depth-to-boundary-layer-thickness ratios of 0.1, 0.2, 0.35, and 0.5. The second test plate contained cavities with a constant design point depth-to-boundary-layer-thickness ratio of 0.35 with length-to-depth ratios of 8, 12, 16, and 20. Cavity design parameters and the test condition matrix were established using the computational predictions. Preliminary results indicate that the floor-averaged Bump Factor (local heating rate nondimensionalized by upstream reference) at the tested conditions is approximately 0.3 with a standard deviation of 0.04 for laminar-in/laminar-out conditions when the cavity length-to-boundary-layer thickness is between 2.5 and 10 and for cavities in the depth-to-boundary-layer-thickness range of 0.3 to 0.8. Over this same range of conditions and parameters, preliminary results also indicate that the maximum Bump Factor on the cavity centerline falls between 2.0 and 2.75, as long as the cavity-exit conditions remain laminar. Cavities with length-to-boundary-layer-thickness ratio less than 2.5 can not be easily classified with this approach and require further analysis.

Everhart, Joel L.↗